a3835ce695a4a7751e2f4a0128a4c30cb15463d0
30 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Greg Kroah-Hartman
|
2df0fb4a4b |
Merge 5.10.50 into android12-5.10-lts
Changes in 5.10.50
Bluetooth: hci_qca: fix potential GPF
Bluetooth: btqca: Don't modify firmware contents in-place
Bluetooth: Remove spurious error message
ALSA: usb-audio: fix rate on Ozone Z90 USB headset
ALSA: usb-audio: Fix OOB access at proc output
ALSA: firewire-motu: fix stream format for MOTU 8pre FireWire
ALSA: usb-audio: scarlett2: Fix wrong resume call
ALSA: intel8x0: Fix breakage at ac97 clock measurement
ALSA: hda/realtek: fix mute/micmute LEDs for HP ProBook 450 G8
ALSA: hda/realtek: fix mute/micmute LEDs for HP ProBook 445 G8
ALSA: hda/realtek: fix mute/micmute LEDs for HP ProBook 630 G8
ALSA: hda/realtek: Add another ALC236 variant support
ALSA: hda/realtek: fix mute/micmute LEDs for HP EliteBook x360 830 G8
ALSA: hda/realtek: Improve fixup for HP Spectre x360 15-df0xxx
ALSA: hda/realtek: Fix bass speaker DAC mapping for Asus UM431D
ALSA: hda/realtek: Apply LED fixup for HP Dragonfly G1, too
ALSA: hda/realtek: fix mute/micmute LEDs for HP EliteBook 830 G8 Notebook PC
media: dvb-usb: fix wrong definition
Input: usbtouchscreen - fix control-request directions
net: can: ems_usb: fix use-after-free in ems_usb_disconnect()
usb: gadget: eem: fix echo command packet response issue
usb: renesas-xhci: Fix handling of unknown ROM state
USB: cdc-acm: blacklist Heimann USB Appset device
usb: dwc3: Fix debugfs creation flow
usb: typec: Add the missed altmode_id_remove() in typec_register_altmode()
xhci: solve a double free problem while doing s4
gfs2: Fix underflow in gfs2_page_mkwrite
gfs2: Fix error handling in init_statfs
ntfs: fix validity check for file name attribute
selftests/lkdtm: Avoid needing explicit sub-shell
copy_page_to_iter(): fix ITER_DISCARD case
iov_iter_fault_in_readable() should do nothing in xarray case
Input: joydev - prevent use of not validated data in JSIOCSBTNMAP ioctl
crypto: nx - Fix memcpy() over-reading in nonce
crypto: ccp - Annotate SEV Firmware file names
arm_pmu: Fix write counter incorrect in ARMv7 big-endian mode
ARM: dts: ux500: Fix LED probing
ARM: dts: at91: sama5d4: fix pinctrl muxing
btrfs: send: fix invalid path for unlink operations after parent orphanization
btrfs: compression: don't try to compress if we don't have enough pages
btrfs: clear defrag status of a root if starting transaction fails
ext4: cleanup in-core orphan list if ext4_truncate() failed to get a transaction handle
ext4: fix kernel infoleak via ext4_extent_header
ext4: fix overflow in ext4_iomap_alloc()
ext4: return error code when ext4_fill_flex_info() fails
ext4: correct the cache_nr in tracepoint ext4_es_shrink_exit
ext4: remove check for zero nr_to_scan in ext4_es_scan()
ext4: fix avefreec in find_group_orlov
ext4: use ext4_grp_locked_error in mb_find_extent
can: bcm: delay release of struct bcm_op after synchronize_rcu()
can: gw: synchronize rcu operations before removing gw job entry
can: isotp: isotp_release(): omit unintended hrtimer restart on socket release
can: j1939: j1939_sk_init(): set SOCK_RCU_FREE to call sk_destruct() after RCU is done
can: peak_pciefd: pucan_handle_status(): fix a potential starvation issue in TX path
mac80211: remove iwlwifi specific workaround that broke sta NDP tx
SUNRPC: Fix the batch tasks count wraparound.
SUNRPC: Should wake up the privileged task firstly.
bus: mhi: Wait for M2 state during system resume
mm/gup: fix try_grab_compound_head() race with split_huge_page()
perf/smmuv3: Don't trample existing events with global filter
KVM: nVMX: Handle split-lock #AC exceptions that happen in L2
KVM: PPC: Book3S HV: Workaround high stack usage with clang
KVM: x86/mmu: Treat NX as used (not reserved) for all !TDP shadow MMUs
KVM: x86/mmu: Use MMU's role to detect CR4.SMEP value in nested NPT walk
s390/cio: dont call css_wait_for_slow_path() inside a lock
s390: mm: Fix secure storage access exception handling
f2fs: Prevent swap file in LFS mode
clk: agilex/stratix10/n5x: fix how the bypass_reg is handled
clk: agilex/stratix10: remove noc_clk
clk: agilex/stratix10: fix bypass representation
rtc: stm32: Fix unbalanced clk_disable_unprepare() on probe error path
iio: frequency: adf4350: disable reg and clk on error in adf4350_probe()
iio: light: tcs3472: do not free unallocated IRQ
iio: ltr501: mark register holding upper 8 bits of ALS_DATA{0,1} and PS_DATA as volatile, too
iio: ltr501: ltr559: fix initialization of LTR501_ALS_CONTR
iio: ltr501: ltr501_read_ps(): add missing endianness conversion
iio: accel: bma180: Fix BMA25x bandwidth register values
serial: mvebu-uart: fix calculation of clock divisor
serial: sh-sci: Stop dmaengine transfer in sci_stop_tx()
serial_cs: Add Option International GSM-Ready 56K/ISDN modem
serial_cs: remove wrong GLOBETROTTER.cis entry
ath9k: Fix kernel NULL pointer dereference during ath_reset_internal()
ssb: sdio: Don't overwrite const buffer if block_write fails
rsi: Assign beacon rate settings to the correct rate_info descriptor field
rsi: fix AP mode with WPA failure due to encrypted EAPOL
tracing/histograms: Fix parsing of "sym-offset" modifier
tracepoint: Add tracepoint_probe_register_may_exist() for BPF tracing
seq_buf: Make trace_seq_putmem_hex() support data longer than 8
powerpc/stacktrace: Fix spurious "stale" traces in raise_backtrace_ipi()
loop: Fix missing discard support when using LOOP_CONFIGURE
evm: Execute evm_inode_init_security() only when an HMAC key is loaded
evm: Refuse EVM_ALLOW_METADATA_WRITES only if an HMAC key is loaded
fuse: Fix crash in fuse_dentry_automount() error path
fuse: Fix crash if superblock of submount gets killed early
fuse: Fix infinite loop in sget_fc()
fuse: ignore PG_workingset after stealing
fuse: check connected before queueing on fpq->io
fuse: reject internal errno
thermal/cpufreq_cooling: Update offline CPUs per-cpu thermal_pressure
spi: Make of_register_spi_device also set the fwnode
Add a reference to ucounts for each cred
staging: media: rkvdec: fix pm_runtime_get_sync() usage count
media: marvel-ccic: fix some issues when getting pm_runtime
media: mdk-mdp: fix pm_runtime_get_sync() usage count
media: s5p: fix pm_runtime_get_sync() usage count
media: am437x: fix pm_runtime_get_sync() usage count
media: sh_vou: fix pm_runtime_get_sync() usage count
media: mtk-vcodec: fix PM runtime get logic
media: s5p-jpeg: fix pm_runtime_get_sync() usage count
media: sunxi: fix pm_runtime_get_sync() usage count
media: sti/bdisp: fix pm_runtime_get_sync() usage count
media: exynos4-is: fix pm_runtime_get_sync() usage count
media: exynos-gsc: fix pm_runtime_get_sync() usage count
spi: spi-loopback-test: Fix 'tx_buf' might be 'rx_buf'
spi: spi-topcliff-pch: Fix potential double free in pch_spi_process_messages()
spi: omap-100k: Fix the length judgment problem
regulator: uniphier: Add missing MODULE_DEVICE_TABLE
sched/core: Initialize the idle task with preemption disabled
hwrng: exynos - Fix runtime PM imbalance on error
crypto: nx - add missing MODULE_DEVICE_TABLE
media: sti: fix obj-$(config) targets
media: cpia2: fix memory leak in cpia2_usb_probe
media: cobalt: fix race condition in setting HPD
media: hevc: Fix dependent slice segment flags
media: pvrusb2: fix warning in pvr2_i2c_core_done
media: imx: imx7_mipi_csis: Fix logging of only error event counters
crypto: qat - check return code of qat_hal_rd_rel_reg()
crypto: qat - remove unused macro in FW loader
crypto: qce: skcipher: Fix incorrect sg count for dma transfers
arm64: perf: Convert snprintf to sysfs_emit
sched/fair: Fix ascii art by relpacing tabs
media: i2c: ov2659: Use clk_{prepare_enable,disable_unprepare}() to set xvclk on/off
media: bt878: do not schedule tasklet when it is not setup
media: em28xx: Fix possible memory leak of em28xx struct
media: hantro: Fix .buf_prepare
media: cedrus: Fix .buf_prepare
media: v4l2-core: Avoid the dangling pointer in v4l2_fh_release
media: bt8xx: Fix a missing check bug in bt878_probe
media: st-hva: Fix potential NULL pointer dereferences
crypto: hisilicon/sec - fixup 3des minimum key size declaration
Makefile: fix GDB warning with CONFIG_RELR
media: dvd_usb: memory leak in cinergyt2_fe_attach
memstick: rtsx_usb_ms: fix UAF
mmc: sdhci-sprd: use sdhci_sprd_writew
mmc: via-sdmmc: add a check against NULL pointer dereference
spi: meson-spicc: fix a wrong goto jump for avoiding memory leak.
spi: meson-spicc: fix memory leak in meson_spicc_probe
crypto: shash - avoid comparing pointers to exported functions under CFI
media: dvb_net: avoid speculation from net slot
media: siano: fix device register error path
media: imx-csi: Skip first few frames from a BT.656 source
hwmon: (max31790) Report correct current pwm duty cycles
hwmon: (max31790) Fix pwmX_enable attributes
drivers/perf: fix the missed ida_simple_remove() in ddr_perf_probe()
KVM: PPC: Book3S HV: Fix TLB management on SMT8 POWER9 and POWER10 processors
btrfs: fix error handling in __btrfs_update_delayed_inode
btrfs: abort transaction if we fail to update the delayed inode
btrfs: sysfs: fix format string for some discard stats
btrfs: don't clear page extent mapped if we're not invalidating the full page
btrfs: disable build on platforms having page size 256K
locking/lockdep: Fix the dep path printing for backwards BFS
lockding/lockdep: Avoid to find wrong lock dep path in check_irq_usage()
KVM: s390: get rid of register asm usage
regulator: mt6358: Fix vdram2 .vsel_mask
regulator: da9052: Ensure enough delay time for .set_voltage_time_sel
media: Fix Media Controller API config checks
ACPI: video: use native backlight for GA401/GA502/GA503
HID: do not use down_interruptible() when unbinding devices
EDAC/ti: Add missing MODULE_DEVICE_TABLE
ACPI: processor idle: Fix up C-state latency if not ordered
hv_utils: Fix passing zero to 'PTR_ERR' warning
lib: vsprintf: Fix handling of number field widths in vsscanf
Input: goodix - platform/x86: touchscreen_dmi - Move upside down quirks to touchscreen_dmi.c
platform/x86: touchscreen_dmi: Add an extra entry for the upside down Goodix touchscreen on Teclast X89 tablets
platform/x86: touchscreen_dmi: Add info for the Goodix GT912 panel of TM800A550L tablets
ACPI: EC: Make more Asus laptops use ECDT _GPE
block_dump: remove block_dump feature in mark_inode_dirty()
blk-mq: grab rq->refcount before calling ->fn in blk_mq_tagset_busy_iter
blk-mq: clear stale request in tags->rq[] before freeing one request pool
fs: dlm: cancel work sync othercon
random32: Fix implicit truncation warning in prandom_seed_state()
open: don't silently ignore unknown O-flags in openat2()
drivers: hv: Fix missing error code in vmbus_connect()
fs: dlm: fix memory leak when fenced
ACPICA: Fix memory leak caused by _CID repair function
ACPI: bus: Call kobject_put() in acpi_init() error path
ACPI: resources: Add checks for ACPI IRQ override
block: fix race between adding/removing rq qos and normal IO
platform/x86: asus-nb-wmi: Revert "Drop duplicate DMI quirk structures"
platform/x86: asus-nb-wmi: Revert "add support for ASUS ROG Zephyrus G14 and G15"
platform/x86: toshiba_acpi: Fix missing error code in toshiba_acpi_setup_keyboard()
nvme-pci: fix var. type for increasing cq_head
nvmet-fc: do not check for invalid target port in nvmet_fc_handle_fcp_rqst()
EDAC/Intel: Do not load EDAC driver when running as a guest
PCI: hv: Add check for hyperv_initialized in init_hv_pci_drv()
cifs: improve fallocate emulation
ACPI: EC: trust DSDT GPE for certain HP laptop
clocksource: Retry clock read if long delays detected
clocksource: Check per-CPU clock synchronization when marked unstable
tpm_tis_spi: add missing SPI device ID entries
ACPI: tables: Add custom DSDT file as makefile prerequisite
HID: wacom: Correct base usage for capacitive ExpressKey status bits
cifs: fix missing spinlock around update to ses->status
mailbox: qcom: Use PLATFORM_DEVID_AUTO to register platform device
block: fix discard request merge
kthread_worker: fix return value when kthread_mod_delayed_work() races with kthread_cancel_delayed_work_sync()
ia64: mca_drv: fix incorrect array size calculation
writeback, cgroup: increment isw_nr_in_flight before grabbing an inode
spi: Allow to have all native CSs in use along with GPIOs
spi: Avoid undefined behaviour when counting unused native CSs
media: venus: Rework error fail recover logic
media: s5p_cec: decrement usage count if disabled
media: hantro: do a PM resume earlier
crypto: ixp4xx - dma_unmap the correct address
crypto: ixp4xx - update IV after requests
crypto: ux500 - Fix error return code in hash_hw_final()
sata_highbank: fix deferred probing
pata_rb532_cf: fix deferred probing
media: I2C: change 'RST' to "RSET" to fix multiple build errors
sched/uclamp: Fix wrong implementation of cpu.uclamp.min
sched/uclamp: Fix locking around cpu_util_update_eff()
kbuild: Fix objtool dependency for 'OBJECT_FILES_NON_STANDARD_<obj> := n'
pata_octeon_cf: avoid WARN_ON() in ata_host_activate()
evm: fix writing <securityfs>/evm overflow
x86/elf: Use _BITUL() macro in UAPI headers
crypto: sa2ul - Fix leaks on failure paths with sa_dma_init()
crypto: sa2ul - Fix pm_runtime enable in sa_ul_probe()
crypto: ccp - Fix a resource leak in an error handling path
media: rc: i2c: Fix an error message
pata_ep93xx: fix deferred probing
locking/lockdep: Reduce LOCKDEP dependency list
media: rkvdec: Fix .buf_prepare
media: exynos4-is: Fix a use after free in isp_video_release
media: au0828: fix a NULL vs IS_ERR() check
media: tc358743: Fix error return code in tc358743_probe_of()
media: gspca/gl860: fix zero-length control requests
m68k: atari: Fix ATARI_KBD_CORE kconfig unmet dependency warning
media: siano: Fix out-of-bounds warnings in smscore_load_firmware_family2()
regulator: fan53880: Fix vsel_mask setting for FAN53880_BUCK
crypto: nitrox - fix unchecked variable in nitrox_register_interrupts
crypto: omap-sham - Fix PM reference leak in omap sham ops
crypto: x86/curve25519 - fix cpu feature checking logic in mod_exit
crypto: sm2 - remove unnecessary reset operations
crypto: sm2 - fix a memory leak in sm2
mmc: usdhi6rol0: fix error return code in usdhi6_probe()
arm64: consistently use reserved_pg_dir
arm64/mm: Fix ttbr0 values stored in struct thread_info for software-pan
media: subdev: remove VIDIOC_DQEVENT_TIME32 handling
media: s5p-g2d: Fix a memory leak on ctx->fh.m2m_ctx
hwmon: (lm70) Use device_get_match_data()
hwmon: (lm70) Revert "hwmon: (lm70) Add support for ACPI"
hwmon: (max31722) Remove non-standard ACPI device IDs
hwmon: (max31790) Fix fan speed reporting for fan7..12
KVM: nVMX: Sync all PGDs on nested transition with shadow paging
KVM: nVMX: Ensure 64-bit shift when checking VMFUNC bitmap
KVM: nVMX: Don't clobber nested MMU's A/D status on EPTP switch
KVM: x86/mmu: Fix return value in tdp_mmu_map_handle_target_level()
perf/arm-cmn: Fix invalid pointer when access dtc object sharing the same IRQ number
KVM: arm64: Don't zero the cycle count register when PMCR_EL0.P is set
regulator: hi655x: Fix pass wrong pointer to config.driver_data
btrfs: clear log tree recovering status if starting transaction fails
x86/sev: Make sure IRQs are disabled while GHCB is active
x86/sev: Split up runtime #VC handler for correct state tracking
sched/rt: Fix RT utilization tracking during policy change
sched/rt: Fix Deadline utilization tracking during policy change
sched/uclamp: Fix uclamp_tg_restrict()
lockdep: Fix wait-type for empty stack
lockdep/selftests: Fix selftests vs PROVE_RAW_LOCK_NESTING
spi: spi-sun6i: Fix chipselect/clock bug
crypto: nx - Fix RCU warning in nx842_OF_upd_status
psi: Fix race between psi_trigger_create/destroy
media: v4l2-async: Clean v4l2_async_notifier_add_fwnode_remote_subdev
media: video-mux: Skip dangling endpoints
PM / devfreq: Add missing error code in devfreq_add_device()
ACPI: PM / fan: Put fan device IDs into separate header file
block: avoid double io accounting for flush request
nvme-pci: look for StorageD3Enable on companion ACPI device instead
ACPI: sysfs: Fix a buffer overrun problem with description_show()
mark pstore-blk as broken
clocksource/drivers/timer-ti-dm: Save and restore timer TIOCP_CFG
extcon: extcon-max8997: Fix IRQ freeing at error path
ACPI: APEI: fix synchronous external aborts in user-mode
blk-wbt: introduce a new disable state to prevent false positive by rwb_enabled()
blk-wbt: make sure throttle is enabled properly
ACPI: Use DEVICE_ATTR_<RW|RO|WO> macros
ACPI: bgrt: Fix CFI violation
cpufreq: Make cpufreq_online() call driver->offline() on errors
blk-mq: update hctx->dispatch_busy in case of real scheduler
ocfs2: fix snprintf() checking
dax: fix ENOMEM handling in grab_mapping_entry()
mm/debug_vm_pgtable/basic: add validation for dirtiness after write protect
mm/debug_vm_pgtable/basic: iterate over entire protection_map[]
mm/debug_vm_pgtable: ensure THP availability via has_transparent_hugepage()
swap: fix do_swap_page() race with swapoff
mm/shmem: fix shmem_swapin() race with swapoff
mm: memcg/slab: properly set up gfp flags for objcg pointer array
mm: page_alloc: refactor setup_per_zone_lowmem_reserve()
mm/page_alloc: fix counting of managed_pages
xfrm: xfrm_state_mtu should return at least 1280 for ipv6
drm/bridge/sii8620: fix dependency on extcon
drm/bridge: Fix the stop condition of drm_bridge_chain_pre_enable()
drm/amd/dc: Fix a missing check bug in dm_dp_mst_detect()
drm/ast: Fix missing conversions to managed API
video: fbdev: imxfb: Fix an error message
net: mvpp2: Put fwnode in error case during ->probe()
net: pch_gbe: Propagate error from devm_gpio_request_one()
pinctrl: renesas: r8a7796: Add missing bias for PRESET# pin
pinctrl: renesas: r8a77990: JTAG pins do not have pull-down capabilities
drm/vmwgfx: Mark a surface gpu-dirty after the SVGA3dCmdDXGenMips command
drm/vmwgfx: Fix cpu updates of coherent multisample surfaces
net: qrtr: ns: Fix error return code in qrtr_ns_init()
clk: meson: g12a: fix gp0 and hifi ranges
net: ftgmac100: add missing error return code in ftgmac100_probe()
drm: rockchip: set alpha_en to 0 if it is not used
drm/rockchip: cdn-dp-core: add missing clk_disable_unprepare() on error in cdn_dp_grf_write()
drm/rockchip: dsi: move all lane config except LCDC mux to bind()
drm/rockchip: lvds: Fix an error handling path
drm/rockchip: cdn-dp: fix sign extension on an int multiply for a u64 result
mptcp: fix pr_debug in mptcp_token_new_connect
mptcp: generate subflow hmac after mptcp_finish_join()
RDMA/srp: Fix a recently introduced memory leak
RDMA/rtrs-clt: Check state of the rtrs_clt_sess before reading its stats
RDMA/rtrs: Do not reset hb_missed_max after re-connection
RDMA/rtrs-srv: Fix memory leak of unfreed rtrs_srv_stats object
RDMA/rtrs-srv: Fix memory leak when having multiple sessions
RDMA/rtrs-clt: Check if the queue_depth has changed during a reconnection
RDMA/rtrs-clt: Fix memory leak of not-freed sess->stats and stats->pcpu_stats
ehea: fix error return code in ehea_restart_qps()
clk: tegra30: Use 300MHz for video decoder by default
xfrm: remove the fragment check for ipv6 beet mode
net/sched: act_vlan: Fix modify to allow 0
RDMA/core: Sanitize WQ state received from the userspace
drm/pl111: depend on CONFIG_VEXPRESS_CONFIG
RDMA/rxe: Fix failure during driver load
drm/pl111: Actually fix CONFIG_VEXPRESS_CONFIG depends
drm/vc4: hdmi: Fix error path of hpd-gpios
clk: vc5: fix output disabling when enabling a FOD
drm: qxl: ensure surf.data is ininitialized
tools/bpftool: Fix error return code in do_batch()
ath10k: go to path err_unsupported when chip id is not supported
ath10k: add missing error return code in ath10k_pci_probe()
wireless: carl9170: fix LEDS build errors & warnings
ieee802154: hwsim: Fix possible memory leak in hwsim_subscribe_all_others
clk: imx8mq: remove SYS PLL 1/2 clock gates
wcn36xx: Move hal_buf allocation to devm_kmalloc in probe
ssb: Fix error return code in ssb_bus_scan()
brcmfmac: fix setting of station info chains bitmask
brcmfmac: correctly report average RSSI in station info
brcmfmac: Fix a double-free in brcmf_sdio_bus_reset
brcmsmac: mac80211_if: Fix a resource leak in an error handling path
cw1200: Revert unnecessary patches that fix unreal use-after-free bugs
ath11k: Fix an error handling path in ath11k_core_fetch_board_data_api_n()
ath10k: Fix an error code in ath10k_add_interface()
ath11k: send beacon template after vdev_start/restart during csa
netlabel: Fix memory leak in netlbl_mgmt_add_common
RDMA/mlx5: Don't add slave port to unaffiliated list
netfilter: nft_exthdr: check for IPv6 packet before further processing
netfilter: nft_osf: check for TCP packet before further processing
netfilter: nft_tproxy: restrict support to TCP and UDP transport protocols
RDMA/rxe: Fix qp reference counting for atomic ops
selftests/bpf: Whitelist test_progs.h from .gitignore
xsk: Fix missing validation for skb and unaligned mode
xsk: Fix broken Tx ring validation
bpf: Fix libelf endian handling in resolv_btfids
RDMA/rtrs-srv: Set minimal max_send_wr and max_recv_wr
samples/bpf: Fix Segmentation fault for xdp_redirect command
samples/bpf: Fix the error return code of xdp_redirect's main()
mt76: fix possible NULL pointer dereference in mt76_tx
mt76: mt7615: fix NULL pointer dereference in tx_prepare_skb()
net: ethernet: aeroflex: fix UAF in greth_of_remove
net: ethernet: ezchip: fix UAF in nps_enet_remove
net: ethernet: ezchip: fix error handling
vrf: do not push non-ND strict packets with a source LLA through packet taps again
net: sched: add barrier to ensure correct ordering for lockless qdisc
tls: prevent oversized sendfile() hangs by ignoring MSG_MORE
netfilter: nf_tables_offload: check FLOW_DISSECTOR_KEY_BASIC in VLAN transfer logic
pkt_sched: sch_qfq: fix qfq_change_class() error path
xfrm: Fix xfrm offload fallback fail case
iwlwifi: increase PNVM load timeout
rtw88: 8822c: fix lc calibration timing
vxlan: add missing rcu_read_lock() in neigh_reduce()
ip6_tunnel: fix GRE6 segmentation
net/ipv4: swap flow ports when validating source
net: ti: am65-cpsw-nuss: Fix crash when changing number of TX queues
tc-testing: fix list handling
ieee802154: hwsim: Fix memory leak in hwsim_add_one
ieee802154: hwsim: avoid possible crash in hwsim_del_edge_nl()
bpf: Fix null ptr deref with mixed tail calls and subprogs
drm/msm: Fix error return code in msm_drm_init()
drm/msm/dpu: Fix error return code in dpu_mdss_init()
mac80211: remove iwlwifi specific workaround NDPs of null_response
net: bcmgenet: Fix attaching to PYH failed on RPi 4B
ipv6: exthdrs: do not blindly use init_net
can: j1939: j1939_sk_setsockopt(): prevent allocation of j1939 filter for optlen == 0
bpf: Do not change gso_size during bpf_skb_change_proto()
i40e: Fix error handling in i40e_vsi_open
i40e: Fix autoneg disabling for non-10GBaseT links
i40e: Fix missing rtnl locking when setting up pf switch
Revert "ibmvnic: remove duplicate napi_schedule call in open function"
ibmvnic: set ltb->buff to NULL after freeing
ibmvnic: free tx_pool if tso_pool alloc fails
RDMA/cma: Protect RMW with qp_mutex
net: macsec: fix the length used to copy the key for offloading
net: phy: mscc: fix macsec key length
net: atlantic: fix the macsec key length
ipv6: fix out-of-bound access in ip6_parse_tlv()
e1000e: Check the PCIm state
net: dsa: sja1105: fix NULL pointer dereference in sja1105_reload_cbs()
bpfilter: Specify the log level for the kmsg message
RDMA/cma: Fix incorrect Packet Lifetime calculation
gve: Fix swapped vars when fetching max queues
Revert "be2net: disable bh with spin_lock in be_process_mcc"
Bluetooth: mgmt: Fix slab-out-of-bounds in tlv_data_is_valid
Bluetooth: Fix not sending Set Extended Scan Response
Bluetooth: Fix Set Extended (Scan Response) Data
Bluetooth: Fix handling of HCI_LE_Advertising_Set_Terminated event
clk: actions: Fix UART clock dividers on Owl S500 SoC
clk: actions: Fix SD clocks factor table on Owl S500 SoC
clk: actions: Fix bisp_factor_table based clocks on Owl S500 SoC
clk: actions: Fix AHPPREDIV-H-AHB clock chain on Owl S500 SoC
clk: qcom: clk-alpha-pll: fix CAL_L write in alpha_pll_fabia_prepare
clk: si5341: Wait for DEVICE_READY on startup
clk: si5341: Avoid divide errors due to bogus register contents
clk: si5341: Check for input clock presence and PLL lock on startup
clk: si5341: Update initialization magic
writeback: fix obtain a reference to a freeing memcg css
net: lwtunnel: handle MTU calculation in forwading
net: sched: fix warning in tcindex_alloc_perfect_hash
net: tipc: fix FB_MTU eat two pages
RDMA/mlx5: Don't access NULL-cleared mpi pointer
RDMA/core: Always release restrack object
MIPS: Fix PKMAP with 32-bit MIPS huge page support
staging: fbtft: Rectify GPIO handling
staging: fbtft: Don't spam logs when probe is deferred
ASoC: rt5682: Disable irq on shutdown
rcu: Invoke rcu_spawn_core_kthreads() from rcu_spawn_gp_kthread()
serial: fsl_lpuart: don't modify arbitrary data on lpuart32
serial: fsl_lpuart: remove RTSCTS handling from get_mctrl()
serial: 8250_omap: fix a timeout loop condition
tty: nozomi: Fix a resource leak in an error handling function
mwifiex: re-fix for unaligned accesses
iio: adis_buffer: do not return ints in irq handlers
iio: adis16400: do not return ints in irq handlers
iio: adis16475: do not return ints in irq handlers
iio: accel: bma180: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: accel: bma220: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: accel: hid: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: accel: kxcjk-1013: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: accel: mxc4005: Fix overread of data and alignment issue.
iio: accel: stk8312: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: accel: stk8ba50: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: adc: ti-ads1015: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: adc: vf610: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: gyro: bmg160: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: humidity: am2315: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: prox: srf08: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: prox: pulsed-light: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: prox: as3935: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: magn: hmc5843: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: magn: bmc150: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: light: isl29125: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: light: tcs3414: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: light: tcs3472: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: chemical: atlas: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: cros_ec_sensors: Fix alignment of buffer in iio_push_to_buffers_with_timestamp()
iio: potentiostat: lmp91000: Fix alignment of buffer in iio_push_to_buffers_with_timestamp()
ASoC: rk3328: fix missing clk_disable_unprepare() on error in rk3328_platform_probe()
ASoC: hisilicon: fix missing clk_disable_unprepare() on error in hi6210_i2s_startup()
backlight: lm3630a_bl: Put fwnode in error case during ->probe()
ASoC: rsnd: tidyup loop on rsnd_adg_clk_query()
Input: hil_kbd - fix error return code in hil_dev_connect()
perf scripting python: Fix tuple_set_u64()
mtd: partitions: redboot: seek fis-index-block in the right node
mtd: rawnand: arasan: Ensure proper configuration for the asserted target
staging: mmal-vchiq: Fix incorrect static vchiq_instance.
char: pcmcia: error out if 'num_bytes_read' is greater than 4 in set_protocol()
firmware: stratix10-svc: Fix a resource leak in an error handling path
tty: nozomi: Fix the error handling path of 'nozomi_card_init()'
leds: class: The -ENOTSUPP should never be seen by user space
leds: lm3532: select regmap I2C API
leds: lm36274: Put fwnode in error case during ->probe()
leds: lm3692x: Put fwnode in any case during ->probe()
leds: lm3697: Don't spam logs when probe is deferred
leds: lp50xx: Put fwnode in error case during ->probe()
scsi: FlashPoint: Rename si_flags field
scsi: iscsi: Flush block work before unblock
mfd: mp2629: Select MFD_CORE to fix build error
mfd: rn5t618: Fix IRQ trigger by changing it to level mode
fsi: core: Fix return of error values on failures
fsi: scom: Reset the FSI2PIB engine for any error
fsi: occ: Don't accept response from un-initialized OCC
fsi/sbefifo: Clean up correct FIFO when receiving reset request from SBE
fsi/sbefifo: Fix reset timeout
visorbus: fix error return code in visorchipset_init()
iommu/amd: Fix extended features logging
s390/irq: select HAVE_IRQ_EXIT_ON_IRQ_STACK
s390: enable HAVE_IOREMAP_PROT
s390: appldata depends on PROC_SYSCTL
selftests: splice: Adjust for handler fallback removal
iommu/dma: Fix IOVA reserve dma ranges
ASoC: max98373-sdw: use first_hw_init flag on resume
ASoC: rt1308-sdw: use first_hw_init flag on resume
ASoC: rt5682-sdw: use first_hw_init flag on resume
ASoC: rt700-sdw: use first_hw_init flag on resume
ASoC: rt711-sdw: use first_hw_init flag on resume
ASoC: rt715-sdw: use first_hw_init flag on resume
ASoC: rt5682: fix getting the wrong device id when the suspend_stress_test
ASoC: rt5682-sdw: set regcache_cache_only false before reading RT5682_DEVICE_ID
ASoC: mediatek: mtk-btcvsd: Fix an error handling path in 'mtk_btcvsd_snd_probe()'
usb: gadget: f_fs: Fix setting of device and driver data cross-references
usb: dwc2: Don't reset the core after setting turnaround time
eeprom: idt_89hpesx: Put fwnode in matching case during ->probe()
eeprom: idt_89hpesx: Restore printing the unsupported fwnode name
thunderbolt: Bond lanes only when dual_link_port != NULL in alloc_dev_default()
iio: adc: at91-sama5d2: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: adc: hx711: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: adc: mxs-lradc: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: adc: ti-ads8688: Fix alignment of buffer in iio_push_to_buffers_with_timestamp()
iio: magn: rm3100: Fix alignment of buffer in iio_push_to_buffers_with_timestamp()
iio: light: vcnl4000: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
ASoC: fsl_spdif: Fix error handler with pm_runtime_enable
staging: gdm724x: check for buffer overflow in gdm_lte_multi_sdu_pkt()
staging: gdm724x: check for overflow in gdm_lte_netif_rx()
staging: rtl8712: fix error handling in r871xu_drv_init
staging: rtl8712: fix memory leak in rtl871x_load_fw_cb
coresight: core: Fix use of uninitialized pointer
staging: mt7621-dts: fix pci address for PCI memory range
serial: 8250: Actually allow UPF_MAGIC_MULTIPLIER baud rates
iio: light: vcnl4035: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: prox: isl29501: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
ASoC: cs42l42: Correct definition of CS42L42_ADC_PDN_MASK
of: Fix truncation of memory sizes on 32-bit platforms
mtd: rawnand: marvell: add missing clk_disable_unprepare() on error in marvell_nfc_resume()
habanalabs: Fix an error handling path in 'hl_pci_probe()'
scsi: mpt3sas: Fix error return value in _scsih_expander_add()
soundwire: stream: Fix test for DP prepare complete
phy: uniphier-pcie: Fix updating phy parameters
phy: ti: dm816x: Fix the error handling path in 'dm816x_usb_phy_probe()
extcon: sm5502: Drop invalid register write in sm5502_reg_data
extcon: max8997: Add missing modalias string
powerpc/powernv: Fix machine check reporting of async store errors
ASoC: atmel-i2s: Fix usage of capture and playback at the same time
configfs: fix memleak in configfs_release_bin_file
ASoC: Intel: sof_sdw: add SOF_RT715_DAI_ID_FIX for AlderLake
ASoC: fsl_spdif: Fix unexpected interrupt after suspend
leds: as3645a: Fix error return code in as3645a_parse_node()
leds: ktd2692: Fix an error handling path
selftests/ftrace: fix event-no-pid on 1-core machine
serial: 8250: 8250_omap: Disable RX interrupt after DMA enable
serial: 8250: 8250_omap: Fix possible interrupt storm on K3 SoCs
powerpc: Offline CPU in stop_this_cpu()
powerpc/papr_scm: Properly handle UUID types and API
powerpc/64s: Fix copy-paste data exposure into newly created tasks
powerpc/papr_scm: Make 'perf_stats' invisible if perf-stats unavailable
ALSA: firewire-lib: Fix 'amdtp_domain_start()' when no AMDTP_OUT_STREAM stream is found
serial: mvebu-uart: do not allow changing baudrate when uartclk is not available
serial: mvebu-uart: correctly calculate minimal possible baudrate
arm64: dts: marvell: armada-37xx: Fix reg for standard variant of UART
vfio/pci: Handle concurrent vma faults
mm/pmem: avoid inserting hugepage PTE entry with fsdax if hugepage support is disabled
mm/huge_memory.c: remove dedicated macro HPAGE_CACHE_INDEX_MASK
mm/huge_memory.c: add missing read-only THP checking in transparent_hugepage_enabled()
mm/huge_memory.c: don't discard hugepage if other processes are mapping it
mm/hugetlb: use helper huge_page_order and pages_per_huge_page
mm/hugetlb: remove redundant check in preparing and destroying gigantic page
hugetlb: remove prep_compound_huge_page cleanup
include/linux/huge_mm.h: remove extern keyword
mm/z3fold: fix potential memory leak in z3fold_destroy_pool()
mm/z3fold: use release_z3fold_page_locked() to release locked z3fold page
lib/math/rational.c: fix divide by zero
selftests/vm/pkeys: fix alloc_random_pkey() to make it really, really random
selftests/vm/pkeys: handle negative sys_pkey_alloc() return code
selftests/vm/pkeys: refill shadow register after implicit kernel write
perf llvm: Return -ENOMEM when asprintf() fails
csky: fix syscache.c fallthrough warning
csky: syscache: Fixup duplicate cache flush
exfat: handle wrong stream entry size in exfat_readdir()
scsi: fc: Correct RHBA attributes length
scsi: target: cxgbit: Unmap DMA buffer before calling target_execute_cmd()
mailbox: qcom-ipcc: Fix IPCC mbox channel exhaustion
fscrypt: don't ignore minor_hash when hash is 0
fscrypt: fix derivation of SipHash keys on big endian CPUs
tpm: Replace WARN_ONCE() with dev_err_once() in tpm_tis_status()
erofs: fix error return code in erofs_read_superblock()
block: return the correct bvec when checking for gaps
io_uring: fix blocking inline submission
mmc: block: Disable CMDQ on the ioctl path
mmc: vub3000: fix control-request direction
media: exynos4-is: remove a now unused integer
scsi: core: Retry I/O for Notify (Enable Spinup) Required error
crypto: qce - fix error return code in qce_skcipher_async_req_handle()
s390: preempt: Fix preempt_count initialization
cred: add missing return error code when set_cred_ucounts() failed
iommu/dma: Fix compile warning in 32-bit builds
powerpc/preempt: Don't touch the idle task's preempt_count during hotplug
Linux 5.10.50
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Iec4eab24ea8eb5a6d79739a1aec8432d93a8f82c
|
||
|
Jernej Skrabec
|
893c243e52 |
media: hevc: Fix dependent slice segment flags
[ Upstream commit 67a7e53d5b21f3a84efc03a4e62db7caf97841ef ] Dependent slice segment flag for PPS control is misnamed. It should have "enabled" at the end. It only tells if this flag is present in slice header or not and not the actual value. Fix this by renaming the PPS flag and introduce another flag for slice control which tells actual value. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
|
Stanimir Varbanov
|
a0ac76fc0c |
FROMGIT: media: v4l2-ctrl: Add decoder conceal color control
Add decoder v4l2 control to set conceal color. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> (cherry picked from commit b52051a40908b3867fcab077d4afda47e1bd4c1b git://linuxtv.org/media_tree.git master) Bug: 183579772 Link: https://lkml.org/lkml/2021/2/9/252 Change-Id: I49cac2c1b27cdac72f7dbbb602d2387fd006ff98 Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org> |
||
|
Dikshita Agarwal
|
a6edc4212b |
FROMGIT: media: v4l2-ctrl: add controls for long term reference.
Long Term Reference (LTR) frames are the frames that are encoded sometime in the past and stored in the DPB buffer list to be used as reference to encode future frames. This change adds controls to enable this feature. Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org> Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> (cherry picked from commit f15c54cf3f684cd1a65f6ebc55ee9ada533ec6ef git://linuxtv.org/media_tree.git master) Bug: 175378287 Link: https://lkml.org/lkml/2021/3/24/368 Change-Id: I4890af1665d33ba16a1bf9ae96b8d431ecedd06e Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org> |
||
|
Stanimir Varbanov
|
e628415846 |
FROMGIT: media: v4l2-ctrls: Add control for AUD generation
Add a control to enable inserting of AUD NALU into encoded bitstream. Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> (cherry picked from commit f2bf1bcb191b15c0ac135af2651ebed6c017bcb0 git://linuxtv.org/media_tree.git master) Bug: 175378288 Link: https://lkml.org/lkml/2021/1/19/456 Change-Id: I3d4a8a6801b3a3eb56d8a1ba79203bda7176cbff Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org> |
||
|
Stanimir Varbanov
|
9c6ccd3184 |
FROMGIT: media: docs: Deprecate mfc display delay controls
Deprecate mfc private display delay and display enable controls for new clients and use the standard controls instead. Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> (cherry picked from commit 644bcc0315f2b1c438132c46f78221cd6a6f67f3 git://linuxtv.org/media_tree.git master) Bug: 183580457 Link: https://lkml.org/lkml/2021/1/15/175 Change-Id: Ifdb228bcb395391160727fc98852a2ace6903d2d Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org> |
||
|
Stanimir Varbanov
|
2a3e5b8c90 |
FROMGIT: media: v4l2-ctrl: Make display delay and display enable std controls
Make display delay and display delay enable MFC controls standard v4l controls. This will allow reuse of the controls for other decoder drivers. Also the new proposed controls are now codec agnostic because they could be used for any codec. Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> (cherry picked from commit 9f3d1056ea54170bfcc678ca69f802492cc69f93 git://linuxtv.org/media_tree.git master) Bug: 183580457 Link: https://lkml.org/lkml/2021/1/15/171 Change-Id: I06f0c5e08986965ff5808d1c320f1680c019f05d Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org> |
||
|
Dikshita Agarwal
|
252e1705cf |
BACKPORT: media: v4l2-ctrl: Add base layer priority id control.
This control indicates the priority id to be applied to base layer. [hverkuil: renumbered V4L2_CID_MPEG_VIDEO_BASELAYER_PRIORITY_ID] Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> (cherry picked from commit 6bde70da98f6b5f5dbd61d2fa9c1e7efe83b0402) Bug: 175370801 Link: https://lkml.org/lkml/2021/1/4/9 [dikshita : Original change has multiple dependencies, hence needs manual modifications to pick up the change in simplified way] Change-Id: I59dfdbb366d966d3ce2d2b4ab009111975d7c660 Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org> |
||
|
Dikshita Agarwal
|
059ab33f5f |
BACKPORT: media: v4l2-ctrl: Add layer wise bitrate controls for h264
Adds bitrate control for all coding layers for h264 same as hevc. Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> (cherry picked from commit 4ca134ee98238c3aaf0bb51094716373d8ae8720) Change-Id: I83f3fa4ee81885eda62c006f0702edabe4577a17 Bug: 175370800 Link: https://lkml.org/lkml/2020/12/24/137 [dikshita : Original change has multiple dependencies, hence needs manual modifications to pick up the change in simplified way] Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org> |
||
|
Dikshita Agarwal
|
ee1fdcb814 |
BACKPORT: media: v4l2-ctrl: Add frame-specific min/max qp controls for hevc
- Adds min/max qp controls for B frame for h264. - Adds min/max qp controls for I/P/B frames for hevc similar to h264. - Update valid range of min/max qp for hevc to accommodate 10 bit. Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> (cherry picked from commit 99d0cbe4be78ca33f06089521a8a0d76a20cdbb7) Bug: 175376073 Link: https://lkml.org/lkml/2020/12/24/139 [dikshita : Original change has multiple dependencies, hence needs manual modifications to pick up the change in simplified way] Change-Id: Ifb70c13b23311623d2bf79383adeca0ec0686922 Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org> |
||
|
Stanimir Varbanov
|
5823833c9a |
media: v4l2-ctrl: Add VP9 codec levels
Add menu control for VP9 codec levels. A total of 14 levels are defined for Profile 0 (8bit) and Profile 2 (10bit). Each level is a set of constrained bitstreams coded with targeted resolutions, frame rates, and bitrates. The definitions have been taken from webm project [1]. [1] https://www.webmproject.org/vp9/levels/ Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> |
||
|
Mauro Carvalho Chehab
|
059b1c5b15 |
media: docs: use the new SPDX header for GFDL-1.1 on *.rst files
SPDX v3.10 gained support for GFDL-1.1 with no invariant sections: https://spdx.org/licenses/GFDL-1.1-no-invariants-or-later.html So, remove the license text, replacing them by this new SPDX license. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> |
||
|
Stanimir Varbanov
|
8b6a1010af |
media: docs: Deprecate mfc frame skip control
Deprecate mfc private frame skip mode control for new clients and use the standard one instead. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> |
||
|
Stanimir Varbanov
|
44f5b2fffc |
media: v4l2-ctrl: Add frame-skip std encoder control
Adds encoders standard v4l2 control for frame-skip. The control is a copy of a custom encoder control so that other v4l2 encoder drivers can use it. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> |
||
|
Maheshwar Ajja
|
4ad1b0d410 |
media: v4l2-ctrls: Add encoder constant quality control
When V4L2_CID_MPEG_VIDEO_BITRATE_MODE value is V4L2_MPEG_VIDEO_BITRATE_MODE_CQ, encoder will produce constant quality output indicated by V4L2_CID_MPEG_VIDEO_CONSTANT_QUALITY control value. Encoder will choose appropriate quantization parameter and bitrate to produce requested frame quality level. Signed-off-by: Maheshwar Ajja <majja@codeaurora.org> Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> |
||
|
Ezequiel Garcia
|
54889c51b8 |
media: uapi: h264: Rename and clarify PPS_FLAG_SCALING_MATRIX_PRESENT
Applications are expected to fill V4L2_CID_MPEG_VIDEO_H264_SCALING_MATRIX if a non-flat scaling matrix applies to the picture. This is the case if SPS scaling_matrix_present_flag or PPS pic_scaling_matrix_present_flag are set, and should be handled by applications. On one hand, the PPS bitstream syntax element signals the presence of a Picture scaling matrix modifying the Sequence (SPS) scaling matrix. On the other hand, our flag should indicate if the scaling matrix V4L2 control is applicable to this request. Rename the flag from PPS_FLAG_PIC_SCALING_MATRIX_PRESENT to PPS_FLAG_SCALING_MATRIX_PRESENT, to avoid mixing this flag with bitstream syntax element pic_scaling_matrix_present_flag, and clarify the meaning of our flag. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Tested-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> |
||
|
Ezequiel Garcia
|
d935856317 |
media: uapi: h264: Clean slice invariants syntax elements
The H.264 specification requires in section 7.4.3 "Slice header semantics", that the following values shall be the same in all slice headers: pic_parameter_set_id frame_num field_pic_flag bottom_field_flag idr_pic_id pic_order_cnt_lsb delta_pic_order_cnt_bottom delta_pic_order_cnt[ 0 ] delta_pic_order_cnt[ 1 ] sp_for_switch_flag slice_group_change_cycle These bitstream fields are part of the slice header, and therefore passed redundantly on each slice. The purpose of the redundancy is to make the codec fault-tolerant in network scenarios. This is of course not needed to be reflected in the V4L2 controls, given the bitstream has already been parsed by applications. Therefore, move the redundant fields to the per-frame decode parameters control (DECODE_PARAMS). Field 'pic_parameter_set_id' is simply removed in this case, because the PPS control must currently contain the active PPS. Syntax elements dec_ref_pic_marking() and those related to pic order count, remain invariant as well, and therefore, the fields dec_ref_pic_marking_bit_size and pic_order_cnt_bit_size are also common to all slices. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Tested-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> |
||
|
Ezequiel Garcia
|
2287c5e65c |
media: uapi: h264: Clarify SLICE_BASED mode
Currently, the SLICE_BASED and FRAME_BASED modes documentation is misleading and not matching the intended use-cases. Drop non-required fields SLICE_PARAMS 'start_byte_offset' and DECODE_PARAMS 'num_slices' and clarify the decoding modes in the documentation. On SLICE_BASED mode, a single slice is expected per OUTPUT buffer, and therefore 'start_byte_offset' is not needed (since the offset to the slice is the start of the buffer). This mode requires the use of CAPTURE buffer holding, and so the number of slices shall not be required. On FRAME_BASED mode, the devices are expected to take care of slice parsing. Neither SLICE_PARAMS are required (and shouldn't be exposed by frame-based drivers), nor the number of slices. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Tested-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> |
||
|
Ezequiel Garcia
|
f6f0d58edf |
media: uapi: h264: Drop SLICE_PARAMS 'size' field
The SLICE_PARAMS control is intended for slice-based devices. In this mode, the OUTPUT buffer contains a single slice, and so the buffer's plane payload size can be used to query the slice size. To reduce the API surface drop the size from the SLICE_PARAMS control. A follow-up change will remove other members in SLICE_PARAMS so we don't need to add padding fields here. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Tested-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> |
||
|
Ezequiel Garcia
|
f9879eb378 |
media: uapi: h264: Increase size of DPB entry pic_num
DPB entry PicNum maximum value is 2*MaxFrameNum for interlaced content (field_pic_flag=1). As specified, MaxFrameNum is 2^(log2_max_frame_num_minus4 + 4) and log2_max_frame_num_minus4 is in the range of 0 to 12, which means pic_num should be a 32-bit field. The v4l2_h264_dpb_entry struct needs to be padded to avoid a hole, which might be also useful to allow future uAPI extensions. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Tested-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> |
||
|
Ezequiel Garcia
|
c02ff21952 |
media: uapi: h264: Clean DPB entry interface
As discussed recently, the current interface for the Decoded Picture Buffer is not enough to properly support field coding. This commit introduces enough semantics to support frame and field coding, and to signal how DPB entries are "used for reference". Reserved fields will be added by a follow-up commit. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Tested-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> |
||
|
Ezequiel Garcia
|
4245232fa6 |
media: uapi: h264: Increase size of 'first_mb_in_slice' field
Slice header syntax element 'first_mb_in_slice' can point to the last macroblock, currently the field can only reference 65536 macroblocks which is insufficient for 8K videos. Although unlikely, a 8192x4320 video (where macroblocks are 16x16), would contain 138240 macroblocks on a frame. As per the H264 specification, 'first_mb_in_slice' can be up to PicSizeInMbs - 1, so increase the size of the field to 32-bits. Note that v4l2_ctrl_h264_slice_params struct will be modified in a follow-up commit, and so we defer its 64-bit padding. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Tested-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> |
||
|
Philipp Zabel
|
fb92c56312 |
media: uapi: h264: Clarify pic_order_cnt_bit_size field
Since pic_order_cnt_bit_size is not a syntax element itself, explicitly state that it is the total size in bits of the pic_order_cnt_lsb, delta_pic_order_cnt_bottom, delta_pic_order_cnt[0], and delta_pic_order_cnt[1] syntax elements contained in the slice. [Ezequiel: rebase] Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Tested-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> |
||
|
Ezequiel Garcia
|
eb44c6c9c2 |
media: uapi: h264: Split prediction weight parameters
The prediction weight parameters are only required under certain conditions, which depend on slice header parameters. As specified in section 7.3.3 Slice header syntax, the prediction weight table is present if: ((weighted_pred_flag && (slice_type == P || slice_type == SP)) || \ (weighted_bipred_idc == 1 && slice_type == B)) Given its size, it makes sense to move this table to its control, so applications can avoid passing it if the slice doesn't specify it. Before this change struct v4l2_ctrl_h264_slice_params was 960 bytes. With this change, it's 188 bytes and struct v4l2_ctrl_h264_pred_weight is 772 bytes. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Tested-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> |
||
|
Ezequiel Garcia
|
cefdf80584 |
media: uapi: h264: Further clarify scaling lists order
Commit
|
||
|
Jernej Skrabec
|
e000e1fa4b |
media: uapi: h264: Update reference lists
When dealing with interlaced frames, reference lists must tell if each particular reference is meant for top or bottom field. This info is currently not provided at all in the H264 related controls. Change reference lists to hold a structure, which specifies an index into the DPB array and the field/frame specification for the picture. Currently the only user of these lists is Cedrus which is just compile fixed here. Actual usage of will come in a following commit. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Tested-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> |
||
|
Maheshwar Ajja
|
ff8c2784b0 |
media: uapi: h264: Add new profile and levels
Add H264 profile "Contrained High" and H264 levels "5.2", "6.0", "6.1" and "6.2". Signed-off-by: Maheshwar Ajja <majja@codeaurora.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> |
||
|
Mauro Carvalho Chehab
|
b36343861b |
media: docs: add an uAPI chapter for driver-specific stuff
There are some uAPI stuff that are driver-specific. Add them to the main media uAPI body. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> |
||
|
Mauro Carvalho Chehab
|
32e2eae23f |
media: docs: move user-facing docs to the admin guide
Most of the driver-specific documentation is meant to help users of the media subsystem. Move them to the admin-guide. It should be noticed, however, that several of those files are outdated and will require further work in order to make them useful again. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> |
||
|
Mauro Carvalho Chehab
|
54f38fcae5 |
media: docs: move uAPI book to userspace-api/media
Since 2017, there is an space reserved for userspace API,
created by changeset
|