Currently the idle injection framework uses the play_idle() function
which puts the current CPU in an idle state. The idle state is the
deepest one, as specified by the latency constraint when calling the
subsequent play_idle_precise() function with the INT_MAX.
The idle_injection is used by the cpuidle_cooling device which
computes the idle / run duration to mitigate the temperature by
injecting idle cycles. The cooling device has no control on the depth
of the idle state.
Allow finer control of the idle injection mechanism by allowing to
specify the latency for the idle state. Thus the cooling device has
the ability to have a guarantee on the exit latency of the idle states
it is injecting.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Link: https://lore.kernel.org/r/20200429103644.5492-1-daniel.lezcano@linaro.org
ARM stores unwind information for .init.text in sections named
.ARM.extab.init.text and .ARM.exidx.init.text. Since those aren't
currently recognized as init sections, they're allocated along with the
core section, and relocation fails if the core and the init section are
allocated from different regions and can't reach other.
final section addresses:
...
0x7f800000 .init.text
..
0xcbb54078 .ARM.exidx.init.text
..
section 16 reloc 0 sym '': relocation 42 out of range (0xcbb54078 ->
0x7f800000)
Allow architectures to override the section name so that ARM can fix
this.
Acked-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
In the existing SoundWire code, Master Devices are not explicitly
represented - only SoundWire Slave Devices are exposed (the use of
capital letters follows the SoundWire specification conventions).
With the existing code, the bus is handled without using a proper device,
and bus->dev typically points to a platform device. The right thing to
do as discussed in multiple reviews is use a device for each bus.
The sdw_master_device addition is done with minimal internal plumbing
and not exposed externally. The existing API based on
sdw_bus_master_add() and sdw_bus_master_delete() will deal with the
sdw_master_device life cycle, which minimizes changes to existing
drivers.
Note that the Intel code will be modified in follow-up patches (no
impact on any platform since the connection with ASoC is not supported
upstream so far).
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20200518174322.31561-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
v1 encryption policies are deprecated in favor of v2, and some new
features (e.g. encryption+casefolding) are only being added for v2.
Therefore, the "test_dummy_encryption" mount option (which is used for
encryption I/O testing with xfstests) needs to support v2 policies.
To do this, extend its syntax to be "test_dummy_encryption=v1" or
"test_dummy_encryption=v2". The existing "test_dummy_encryption" (no
argument) also continues to be accepted, to specify the default setting
-- currently v1, but the next patch changes it to v2.
To cleanly support both v1 and v2 while also making it easy to support
specifying other encryption settings in the future (say, accepting
"$contents_mode:$filenames_mode:v2"), make ext4 and f2fs maintain a
pointer to the dummy fscrypt_context rather than using mount flags.
To avoid concurrency issues, don't allow test_dummy_encryption to be set
or changed during a remount. (The former restriction is new, but
xfstests doesn't run into it, so no one should notice.)
Tested with 'gce-xfstests -c {ext4,f2fs}/encrypt -g auto'. On ext4,
there are two regressions, both of which are test bugs: ext4/023 and
ext4/028 fail because they set an xattr and expect it to be stored
inline, but the increase in size of the fscrypt_context from
24 to 40 bytes causes this xattr to be spilled into an external block.
Link: https://lore.kernel.org/r/20200512233251.118314-4-ebiggers@kernel.org
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
This function was introduced to allow for different handling of
link up and link down events particularly with regard to the
netif_carrier. The third argument do_carrier allowed the flag to
be left unchanged.
Since then the phylink has introduced an implementation that
completely ignores the third parameter since it never wants to
change the flag and the phylib always sets the third parameter
to true so the flag is always changed.
Therefore the third argument (i.e. do_carrier) is no longer
necessary and can be removed. This also means that the phylib
phy_link_down() function no longer needs its second argument.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We want to enable kgdb to debug the early parts of the kernel.
Unfortunately kgdb normally is a client of the tty API in the kernel
and serial drivers don't register to the tty layer until fairly late
in the boot process.
Serial drivers do, however, commonly register a boot console. Let's
enable the kgdboc driver to work with boot consoles to provide early
debugging.
This change co-opts the existing read() function pointer that's part
of "struct console". It's assumed that if a boot console (with the
flag CON_BOOT) has implemented read() that both the read() and write()
function are polling functions. That means they work without
interrupts and read() will return immediately (with 0 bytes read) if
there's nothing to read. This should be a safe assumption since it
appears that no current boot consoles implement read() right now and
there seems no reason to do so unless they wanted to support
"kgdboc_earlycon".
The normal/expected way to make all this work is to use
"kgdboc_earlycon" and "kgdboc" together. You should point them both
to the same physical serial connection. At boot time, as the system
transitions from the boot console to the normal console (and registers
a tty), kgdb will switch over.
One awkward part of all this, though, is that there can be a window
where the boot console goes away and we can't quite transtion over to
the main kgdboc that uses the tty layer. There are two main problems:
1. The act of registering the tty doesn't cause any call into kgdboc
so there is a window of time when the tty is there but kgdboc's
init code hasn't been called so we can't transition to it.
2. On some serial drivers the normal console inits (and replaces the
boot console) quite early in the system. Presumably these drivers
were coded up before earlycon worked as well as it does today and
probably they don't need to do this anymore, but it causes us
problems nontheless.
Problem #1 is not too big of a deal somewhat due to the luck of probe
ordering. kgdboc is last in the tty/serial/Makefile so its probe gets
right after all other tty devices. It's not fun to rely on this, but
it does work for the most part.
Problem #2 is a big deal, but only for some serial drivers. Other
serial drivers end up registering the console (which gets rid of the
boot console) and tty at nearly the same time.
The way we'll deal with the window when the system has stopped using
the boot console and the time when we're setup using the tty is to
keep using the boot console. This may sound surprising, but it has
been found to work well in practice. If it doesn't work, it shouldn't
be too hard for a given serial driver to make it keep working.
Specifically, it's expected that the read()/write() function provided
in the boot console should be the same (or nearly the same) as the
normal kgdb polling functions. That means continuing to use them
should work just fine. To make things even more likely to work work
we'll also trap the recently added exit() function in the boot console
we're using and delay any calls to it until we're all done with the
boot console.
NOTE: there could be ways to use all this in weird / unexpected ways.
If you do something like this, it's a bit of a buyer beware situation.
Specifically:
- If you specify only "kgdboc_earlycon" but not "kgdboc" then
(depending on your serial driver) things will probably work OK, but
you'll get a warning printed the first time you use kgdb after the
boot console is gone. You'd only be able to do this, of course, if
the serial driver you're running atop provided an early boot console.
- If your "kgdboc_earlycon" and "kgdboc" devices are not the same
device things should work OK, but it'll be your job to switch over
which device you're monitoring (including figuring out how to switch
over gdb in-flight if you're using it).
When trying to enable "kgdboc_earlycon" it should be noted that the
names that are registered through the boot console layer and the tty
layer are not the same for the same port. For example when debugging
on one board I'd need to pass "kgdboc_earlycon=qcom_geni
kgdboc=ttyMSM0" to enable things properly. Since digging up the boot
console name is a pain and there will rarely be more than one boot
console enabled, you can provide the "kgdboc_earlycon" parameter
without specifying the name of the boot console. In this case we'll
just pick the first boot that implements read() that we find.
This new "kgdboc_earlycon" parameter should be contrasted to the
existing "ekgdboc" parameter. While both provide a way to debug very
early, the usage and mechanisms are quite different. Specifically
"kgdboc_earlycon" is meant to be used in tandem with "kgdboc" and
there is a transition from one to the other. The "ekgdboc" parameter,
on the other hand, replaces the "kgdboc" parameter. It runs the same
logic as the "kgdboc" parameter but just relies on your TTY driver
being present super early. The only known usage of the old "ekgdboc"
parameter is documented as "ekgdboc=kbd earlyprintk=vga". It should
be noted that "kbd" has special treatment allowing it to init early as
a tty device.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/20200507130644.v4.8.I8fba5961bf452ab92350654aa61957f23ecf0100@changeid
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Defining static shadow call stacks is not architecture-specific, so move
the DEFINE_SCS() macro into the core header file.
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
There is nothing architecture-specific about scs_overflow_check() as
it's just a trivial wrapper around scs_corrupted().
For parity with task_stack_end_corrupted(), rename scs_corrupted() to
task_scs_end_corrupted() and call it from schedule_debug() when
CONFIG_SCHED_STACK_END_CHECK_is enabled, which better reflects its
purpose as a debug feature to catch inadvertent overflow of the SCS.
Finally, remove the unused scs_overflow_check() function entirely.
This has absolutely no impact on architectures that do not support SCS
(currently arm64 only).
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Storing the SCS information in thread_info as a {base,offset} pair
introduces an additional load instruction on the ret-to-user path,
since the SCS stack pointer in x18 has to be converted back to an offset
by subtracting the base.
Replace the offset with the absolute SCS stack pointer value instead
and avoid the redundant load.
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Only mlx5_core driver handles fw initialization check and command
interface revision check.
Hence move them inside the mlx5_core driver where it is used.
This avoid exposing these helpers to all mlx5 drivers.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Remove the "metadata_reg_b" field and all uses of this field in code
to match the device specification. As this field is not in use in SW
steering it is safe to remove it.
Signed-off-by: Raed Salem <raeds@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Clean up. I find the name of the svc_sock::sk_reclen field
confusing, so I've changed it to better reflect its function. This
field is not read directly to get the record length. Rather, it is
a buffer containing a record marker that needs to be decoded.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Clean up: Commit d21b05f101 ("rdma: SVCRMDA Header File")
introduced the SVCRDMA_DEBUG macro, but it doesn't seem to have been
used.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Way back when I was writing the RPC/RDMA server-side backchannel
code, I misread the TCP backchannel reply handler logic. When
svc_tcp_recvfrom() successfully receives a backchannel reply, it
does not return -EAGAIN. It sets XPT_DATA and returns zero.
Update svc_rdma_recvfrom() to return zero. Here, XPT_DATA doesn't
need to be set again: it is set whenever a new message is received,
behind a spin lock in a single threaded context.
Also, if handling the cb reply is not successful, the message is
simply dropped. There's no special message framing to deal with as
there is in the TCP case.
Now that the handle_bc_reply() return value is ignored, I've removed
the dprintk call sites in the error exit of handle_bc_reply() in
favor of trace points in other areas that already report the error
cases.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
It appears that the RPC/RDMA transport does not need serialization
of calls to its xpo_sendto method. Move the mutex into the socket
methods that still need that serialization.
Tail latencies are unambiguously better with this patch applied.
fio randrw 8KB 70/30 on NFSv3, smaller numbers are better:
clat percentiles (usec):
With xpt_mutex:
r | 99.99th=[ 8848]
w | 99.99th=[ 9634]
Without xpt_mutex:
r | 99.99th=[ 8586]
w | 99.99th=[ 8979]
Serializing the construction of RPC/RDMA transport headers is not
really necessary at this point, because the Linux NFS server
implementation never changes its credit grant on a connection. If
that should change, then svc_rdma_sendto will need to serialize
access to the transport's credit grant fields.
Reported-by: kbuild test robot <lkp@intel.com>
[ cel: fix uninitialized variable warning ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
This patch is an initial step to replace Intel SVM code with the
following IOMMU SVA ops:
intel_svm_bind_mm() => iommu_sva_bind_device()
intel_svm_unbind_mm() => iommu_sva_unbind_device()
intel_svm_is_pasid_valid() => iommu_sva_get_pasid()
The features below will continue to work but are not included in this patch
in that they are handled mostly within the IOMMU subsystem.
- IO page fault
- mmu notifier
Consolidation of the above will come after merging generic IOMMU sva
code[1]. There should not be any changes needed for SVA users such as
accelerator device drivers during this time.
[1] http://jpbrucker.net/sva/
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200516062101.29541-12-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When VT-d driver runs in the guest, PASID allocation must be
performed via virtual command interface. This patch registers a
custom IOASID allocator which takes precedence over the default
XArray based allocator. The resulting IOASID allocation will always
come from the host. This ensures that PASID namespace is system-
wide.
Virtual command registers are used in the guest only, to prevent
vmexit cost, we cache the capability and store it during initialization.
Signed-off-by: Liu, Yi L <yi.l.liu@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200516062101.29541-9-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Enabling IOMMU in a guest requires communication with the host
driver for certain aspects. Use of PASID ID to enable Shared Virtual
Addressing (SVA) requires managing PASID's in the host. VT-d 3.0 spec
provides a Virtual Command Register (VCMD) to facilitate this.
Writes to this register in the guest are trapped by vIOMMU which
proxies the call to the host driver.
This virtual command interface consists of a capability register,
a virtual command register, and a virtual response register. Refer
to section 10.4.42, 10.4.43, 10.4.44 for more information.
This patch adds the enlightened PASID allocation/free interfaces
via the virtual command interface.
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20200516062101.29541-8-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When supporting guest SVA with emulated IOMMU, the guest PASID
table is shadowed in VMM. Updates to guest vIOMMU PASID table
will result in PASID cache flush which will be passed down to
the host as bind guest PASID calls.
For the SL page tables, it will be harvested from device's
default domain (request w/o PASID), or aux domain in case of
mediated device.
.-------------. .---------------------------.
| vIOMMU | | Guest process CR3, FL only|
| | '---------------------------'
.----------------/
| PASID Entry |--- PASID cache flush -
'-------------' |
| | V
| | CR3 in GPA
'-------------'
Guest
------| Shadow |--------------------------|--------
v v v
Host
.-------------. .----------------------.
| pIOMMU | | Bind FL for GVA-GPA |
| | '----------------------'
.----------------/ |
| PASID Entry | V (Nested xlate)
'----------------\.------------------------------.
| | |SL for GPA-HPA, default domain|
| | '------------------------------'
'-------------'
Where:
- FL = First level/stage one page tables
- SL = Second level/stage two page tables
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200516062101.29541-5-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Nested translation mode is supported in VT-d 3.0 Spec.CH 3.8.
With PASID granular translation type set to 0x11b, translation
result from the first level(FL) also subject to a second level(SL)
page table translation. This mode is used for SVA virtualization,
where FL performs guest virtual to guest physical translation and
SL performs guest physical to host physical translation.
This patch adds a helper function for setting up nested translation
where second level comes from a domain and first level comes from
a guest PGD.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200516062101.29541-4-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Resolve structural conflict between:
59566b0b62: ("x86/ftrace: Have ftrace trampolines turn read-only at the end of system boot up")
which introduced a new reference to 'ftrace_epilogue', and:
0298739b79: ("x86,ftrace: Fix ftrace_regs_caller() unwind")
Which renamed it to 'ftrace_caller_end'. Rename the new usage site in the merge commit.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The interrupt simulator API exposes a lot of custom data structures and
functions and doesn't reuse the interfaces already exposed by the irq
subsystem. This patch tries to address it.
We hide all the simulator-related data structures from users and instead
rely on the well-known irq domain. When creating the interrupt simulator
the user receives a pointer to a newly created irq_domain and can use it
to create mappings for simulated interrupts.
It is also possible to pass a handle to fwnode when creating the simulator
domain and retrieve it using irq_find_matching_fwnode().
The irq_sim_fire() function is dropped as well. Instead we implement the
irq_get/set_irqchip_state interface.
We modify the two modules that use the simulator at the same time as
adding these changes in order to reduce the intermediate bloat that would
result when trying to migrate the drivers in separate patches.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO
Link: https://lore.kernel.org/r/20200514083901.23445-3-brgl@bgdev.pl
Currently a GPIO lookup table can only refer to a specific GPIO by a
tuple, consisting of a GPIO controller label and a GPIO offset inside
the controller.
However, a GPIO may also carry a line name, defined by DT or ACPI.
If present, the line name is the most use-centric way to refer to a
GPIO. Hence add support for looking up GPIOs by line name.
Note that there is no guarantee that GPIO line names are globally
unique, so this will use the first match found.
Implement this by reusing the existing gpiod_lookup infrastructure.
Rename gpiod_lookup.chip_label to gpiod_lookup.key, to make it clear
that this field can have two meanings, and update the kerneldoc and
GPIO_LOOKUP*() macros.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Link: https://lore.kernel.org/r/20200511145257.22970-4-geert+renesas@glider.be
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
mptcp calls this from the transmit side, from process context.
Allow a sleeping allocation instead of unconditional GFP_ATOMIC.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull x86 fix from Borislav Petkov:
"A single fix for early boot crashes of kernels built with gcc10 and
stack protector enabled"
* tag 'x86_urgent_for_v5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Fix early boot crash on gcc-10, third try
Pull up arch-specific prototype efi_systab_show_arch() in order to
fix a -Wmissing-prototypes warning:
arch/x86/platform/efi/efi.c:957:7: warning: no previous prototype for
‘efi_systab_show_arch’ [-Wmissing-prototypes]
char *efi_systab_show_arch(char *str)
Signed-off-by: Benjamin Thiel <b.thiel@posteo.de>
Link: https://lore.kernel.org/r/20200516132647.14568-1-b.thiel@posteo.de
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Pull kvm fixes from Paolo Bonzini:
"A new testcase for guest debugging (gdbstub) that exposed a bunch of
bugs, mostly for AMD processors. And a few other x86 fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Fix off-by-one error in kvm_vcpu_ioctl_x86_setup_mce
KVM: x86: Fix pkru save/restore when guest CR4.PKE=0, move it to x86.c
KVM: SVM: Disable AVIC before setting V_IRQ
KVM: Introduce kvm_make_all_cpus_request_except()
KVM: VMX: pass correct DR6 for GD userspace exit
KVM: x86, SVM: isolate vcpu->arch.dr6 from vmcb->save.dr6
KVM: SVM: keep DR6 synchronized with vcpu->arch.dr6
KVM: nSVM: trap #DB and #BP to userspace if guest debugging is on
KVM: selftests: Add KVM_SET_GUEST_DEBUG test
KVM: X86: Fix single-step with KVM_SET_GUEST_DEBUG
KVM: X86: Set RTM for DB_VECTOR too for KVM_EXIT_DEBUG
KVM: x86: fix DR6 delivery for various cases of #DB injection
KVM: X86: Declare KVM_CAP_SET_GUEST_DEBUG properly
ARM: tegra: Core changes for v5.8-rc1
This contains core changes needed for the CPU frequency scaling and CPU
idle drivers on Tegra20 and Tegra30.
* tag 'tegra-for-5.8-arm-core' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Create tegra20-cpufreq platform device on Tegra30
ARM: tegra: Don't enable PLLX while resuming from LP1 on Tegra30
ARM: tegra: Switch CPU to PLLP on resume from LP1 on Tegra30/114/124
ARM: tegra: Correct PL310 Auxiliary Control Register initialization
ARM: tegra: Do not fully reinitialize L2 on resume
ARM: tegra: Initialize r0 register for firmware wake-up
firmware: tf: Different way of L2 cache enabling after LP2 suspend
firmware: tegra: Make BPMP a regular driver
Link: https://lore.kernel.org/r/20200515145311.1580134-10-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
VExpress modularization
This series enables building various Versatile Express platform drivers
as modules. The primary target is the Fast Model FVP which is supported
in Android. As Android is moving towards their GKI, or generic kernel,
the hardware support has to be in modules. Currently ARCH_VEXPRESS
enables several built-in only drivers. Some of these are needed, but
some are only needed for older 32-bit VExpress platforms and can just
be disabled.
* tag 'vexpress-modules-for-soc-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
ARM: vexpress: Don't select VEXPRESS_CONFIG
bus: vexpress-config: Support building as module
vexpress: Move setting master site to vexpress-config bus
bus: vexpress-config: simplify config bus probing
bus: vexpress-config: Merge vexpress-syscfg into vexpress-config
mfd: vexpress-sysreg: Support building as a module
mfd: vexpress-sysreg: Use devres API variants
mfd: vexpress-sysreg: Drop unused syscon child devices
mfd: vexpress-sysreg: Drop selecting CONFIG_CLKSRC_MMIO
clk: vexpress-osc: Support building as a module
clk: vexpress-osc: Use the devres clock API variants
clk: versatile: Only enable SP810 on 32-bit by default
clk: versatile: Rework kconfig structure
amba: Retry adding deferred devices at late_initcall
arm64: vexpress: Don't select CONFIG_POWER_RESET_VEXPRESS
ARM: vexpress: Move vexpress_flags_set() into arch code
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Move the bpf verifier trace check into the new switch statement in
HEAD.
Resolve the overlapping changes in hinic, where bug fixes overlap
the addition of VF support.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Fix sk_psock reference count leak on receive, from Xiyu Yang.
2) CONFIG_HNS should be invisible, from Geert Uytterhoeven.
3) Don't allow locking route MTUs in ipv6, RFCs actually forbid this,
from Maciej Żenczykowski.
4) ipv4 route redirect backoff wasn't actually enforced, from Paolo
Abeni.
5) Fix netprio cgroup v2 leak, from Zefan Li.
6) Fix infinite loop on rmmod in conntrack, from Florian Westphal.
7) Fix tcp SO_RCVLOWAT hangs, from Eric Dumazet.
8) Various bpf probe handling fixes, from Daniel Borkmann.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (68 commits)
selftests: mptcp: pm: rm the right tmp file
dpaa2-eth: properly handle buffer size restrictions
bpf: Restrict bpf_trace_printk()'s %s usage and add %pks, %pus specifier
bpf: Add bpf_probe_read_{user, kernel}_str() to do_refine_retval_range
bpf: Restrict bpf_probe_read{, str}() only to archs where they work
MAINTAINERS: Mark networking drivers as Maintained.
ipmr: Add lockdep expression to ipmr_for_each_table macro
ipmr: Fix RCU list debugging warning
drivers: net: hamradio: Fix suspicious RCU usage warning in bpqether.c
net: phy: broadcom: fix BCM54XX_SHD_SCR3_TRDDAPD value for BCM54810
tcp: fix error recovery in tcp_zerocopy_receive()
MAINTAINERS: Add Jakub to networking drivers.
MAINTAINERS: another add of Karsten Graul for S390 networking
drivers: ipa: fix typos for ipa_smp2p structure doc
pppoe: only process PADT targeted at local interfaces
selftests/bpf: Enforce returning 0 for fentry/fexit programs
bpf: Enforce returning 0 for fentry/fexit progs
net: stmmac: fix num_por initialization
security: Fix the default value of secid_to_secctx hook
libbpf: Fix register naming in PT_REGS s390 macros
...
MP_JOIN subflows must not land into the accept queue.
Currently tcp_check_req() calls an mptcp specific helper
to detect such scenario.
Such helper leverages the subflow context to check for
MP_JOIN subflows. We need to deal also with MP JOIN
failures, even when the subflow context is not available
due allocation failure.
A possible solution would be changing the syn_recv_sock()
signature to allow returning a more descriptive action/
error code and deal with that in tcp_check_req().
Since the above need is MPTCP specific, this patch instead
uses a TCP request socket hole to add a MPTCP specific flag.
Such flag is used by the MPTCP syn_recv_sock() to tell
tcp_check_req() how to deal with the request socket.
This change is a no-op for !MPTCP build, and makes the
MPTCP code simpler. It allows also the next patch to deal
correctly with MP JOIN failure.
v1 -> v2:
- be more conservative on drop_req initialization (Mat)
RFC -> v1:
- move the drop_req bit inside tcp_request_sock (Eric)
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Reviewed-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf 2020-05-15
The following pull-request contains BPF updates for your *net* tree.
We've added 9 non-merge commits during the last 2 day(s) which contain
a total of 14 files changed, 137 insertions(+), 43 deletions(-).
The main changes are:
1) Fix secid_to_secctx LSM hook default value, from Anders.
2) Fix bug in mmap of bpf array, from Andrii.
3) Restrict bpf_probe_read to archs where they work, from Daniel.
4) Enforce returning 0 for fentry/fexit progs, from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
