[ Upstream commit 280db21e153d8810ce3b93640c63ae922bcb9e8e ]
Similar to the transmission of TPM responses, also the transmission of TPM
commands may become corrupted. Instead of aborting when detecting such
issues, try resending the command again.
Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 513253f8c293c0c8bd46d09d337fc892bf8f9f48 upstream.
recv_data either returns the number of received bytes, or a negative value
representing an error code. Adding the return value directly to the total
number of received bytes therefore looks a little weird, since it might add
a negative error code to a sum of bytes.
The following check for size < expected usually makes the function return
ETIME in that case, so it does not cause too many problems in practice. But
to make the code look cleaner and because the caller might still be
interested in the original error code, explicitly check for the presence of
an error code and pass that through.
Cc: stable@vger.kernel.org
Fixes: cb5354253a ("[PATCH] tpm: spacing cleanups 2")
Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f4032d615f90970d6c3ac1d9c0bce3351eb4445c upstream.
/dev/vtpmx is made visible before 'workqueue' is initialized, which can
lead to a memory corruption in the worst case scenario.
Address this by initializing 'workqueue' as the very first step of the
driver initialization.
Cc: stable@vger.kernel.org
Fixes: 6f99612e25 ("tpm: Proxy driver for supporting multiple emulated TPMs")
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@tuni.fi>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0e069265bce5a40c4eee52e2364bbbd4dabee94a upstream.
Writing the TPM_INT_STATUS register in the interrupt handler to clear the
interrupts only has effect if a locality is held. Since this is not
guaranteed at the time the interrupt is fired, claim the locality
explicitly in the handler.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Michael Niewöhner <linux@mniewoehner.de>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0c7e66e5fd69bf21034c9a9b081d7de7c3eb2cea upstream.
The TIS interrupt handler at least has to read and write the interrupt
status register. In case of SPI both operations result in a call to
tpm_tis_spi_transfer() which uses the bus_lock_mutex of the spi device
and thus must only be called from a sleepable context.
To ensure this request a threaded interrupt handler.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Michael Niewöhner <linux@mniewoehner.de>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 955df4f87760b3bb2af253d3fbb12fb712b3ffa6 ]
In tpm_tis_resume() make sure that the locality has been claimed when
tpm_tis_reenable_interrupts() is called. Otherwise the writings to the
register might not have any effect.
Fixes: 45baa1d1fa ("tpm_tis: Re-enable interrupts upon (S3) resume")
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a2f55d0be296c4e81fd782f3d6c43ed4ec7e265 ]
Implement a usage counter for the (default) locality used by the TPM TIS
driver:
Request the locality from the TPM if it has not been claimed yet, otherwise
only increment the counter. Also release the locality if the counter is 0
otherwise only decrement the counter. Since in case of SPI the register
accesses are locked by means of the SPI bus mutex use a sleepable lock
(i.e. also a mutex) to ensure thread-safety of the counter which may be
accessed by both a userspace thread and the interrupt handler.
By doing this refactor the names of the amended functions to use a more
appropriate prefix.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Michael Niewöhner <linux@mniewoehner.de>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Stable-dep-of: 955df4f87760 ("tpm, tpm_tis: Claim locality when interrupts are reenabled on resume")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 15d7aa4e46eba87242a320f39773aa16faddadee ]
In tpm_tis_probe_single_irq() interrupt registers TPM_INT_VECTOR,
TPM_INT_STATUS and TPM_INT_ENABLE are modified to setup the interrupts.
Currently these modifications are done without holding a locality thus they
have no effect. Fix this by claiming the (default) locality before the
registers are written.
Since now tpm_tis_gen_interrupt() is called with the locality already
claimed remove locality request and release from this function.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Stable-dep-of: 955df4f87760 ("tpm, tpm_tis: Claim locality when interrupts are reenabled on resume")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d789ad726950e612a7f31044260337237c5b490 ]
Both functions tpm_tis_probe_irq_single() and tpm_tis_probe_irq() may setup
the interrupts and then return with an error. This case is indicated by a
missing TPM_CHIP_FLAG_IRQ flag in chip->flags.
Currently the interrupt setup is only undone if tpm_tis_probe_irq_single()
fails. Undo the setup also if tpm_tis_probe_irq() fails.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Michael Niewöhner <linux@mniewoehner.de>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Stable-dep-of: 955df4f87760 ("tpm, tpm_tis: Claim locality when interrupts are reenabled on resume")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 282657a8bd7fddcf511b834f43705001668b33a7 ]
In disable_interrupts() the TPM_GLOBAL_INT_ENABLE bit is unset in the
TPM_INT_ENABLE register to shut the interrupts off. However modifying the
register is only possible with a held locality. So claim the locality
before disable_interrupts() is called.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Michael Niewöhner <linux@mniewoehner.de>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Stable-dep-of: 955df4f87760 ("tpm, tpm_tis: Claim locality when interrupts are reenabled on resume")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ed9be0e6c892a783800d77a41ca4c7255c6af8c5 ]
If in tpm_tis_probe_irq_single() an error occurs after the original
interrupt vector has been read, restore the interrupts before the error is
returned.
Since the caller does not check the error value, return -1 in any case that
the TPM_CHIP_FLAG_IRQ flag is not set. Since the return value of function
tpm_tis_gen_interrupt() is not longer used, make it a void function.
Fixes: 1107d065fd ("tpm_tis: Introduce intermediate layer for TPM access")
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit db9622f762104459ff87ecdf885cc42c18053fd9 upstream.
In check_acpi_tpm2(), we get the TPM2 table just to make
sure the table is there, not used after the init, so the
acpi_put_table() should be added to release the ACPI memory.
Fixes: 4cb586a188 ("tpm_tis: Consolidate the platform and acpi probe flow")
Cc: stable@vger.kernel.org
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 37e90c374dd11cf4919c51e847c6d6ced0abc555 upstream.
In crb_acpi_add(), we get the TPM2 table to retrieve information
like start method, and then assign them to the priv data, so the
TPM2 table is not used after the init, should be freed, call
acpi_put_table() to fix the memory leak.
Fixes: 30fc8d138e ("tpm: TPM 2.0 CRB Interface")
Cc: stable@vger.kernel.org
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8740a12ca2e2959531ad253bac99ada338b33d80 upstream.
The start and length of the event log area are obtained from
TPM2 or TCPA table, so we call acpi_get_table() to get the
ACPI information, but the acpi_get_table() should be coupled with
acpi_put_table() to release the ACPI memory, add the acpi_put_table()
properly to fix the memory leak.
While we are at it, remove the redundant empty line at the
end of the tpm_read_log_acpi().
Fixes: 0bfb237460 ("tpm: Move eventlog files to a subdirectory")
Fixes: 85467f63a0 ("tpm: Add support for event log pointer found in TPM2 ACPI table")
Cc: stable@vger.kernel.org
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f5264068071964b56dc02c9dab3d11574aaca6ff ]
The error message in __crb_relinquish_locality() mentions requestAccess
instead of Relinquish. Fix it.
Fixes: 888d867df4 ("tpm: cmd_ready command can be issued only after granting locality")
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b7d07f7acaac2c7750e420dcf4414588ede6d03 ]
The ftpm_mod_init() returns the driver_register() directly without checking
its return value, if driver_register() failed, the ftpm_tee_plat_driver is
not unregistered.
Fix by unregister ftpm_tee_plat_driver when driver_register() failed.
Fixes: 9f1944c23c ("tpm_ftpm_tee: register driver on TEE bus")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 23393c6461422df5bf8084a086ada9a7e17dc2ba upstream.
Currently tpm transactions are executed unconditionally in
tpm_pm_suspend() function, which may lead to races with other tpm
accessors in the system.
Specifically, the hw_random tpm driver makes use of tpm_get_random(),
and this function is called in a loop from a kthread, which means it's
not frozen alongside userspace, and so can race with the work done
during system suspend:
tpm tpm0: tpm_transmit: tpm_recv: error -52
tpm tpm0: invalid TPM_STS.x 0xff, dumping stack for forensics
CPU: 0 PID: 1 Comm: init Not tainted 6.1.0-rc5+ #135
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-20220807_005459-localhost 04/01/2014
Call Trace:
tpm_tis_status.cold+0x19/0x20
tpm_transmit+0x13b/0x390
tpm_transmit_cmd+0x20/0x80
tpm1_pm_suspend+0xa6/0x110
tpm_pm_suspend+0x53/0x80
__pnp_bus_suspend+0x35/0xe0
__device_suspend+0x10f/0x350
Fix this by calling tpm_try_get_ops(), which itself is a wrapper around
tpm_chip_start(), but takes the appropriate mutex.
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://lore.kernel.org/all/c5ba47ef-393f-1fba-30bd-1230d1b4b592@suse.cz/
Cc: stable@vger.kernel.org
Fixes: e891db1a18 ("tpm: turn on TPM on suspend for TPM 1.x")
[Jason: reworked commit message, added metadata]
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d0dc1a7100f19121f6e7450f9cdda11926aa3838 upstream.
Currently it returns zero when CRQ response timed out, it should return
an error code instead.
Fixes: d8d74ea3c0 ("tpm: ibmvtpm: Wait for buffer to be set before proceeding")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e57b2523bd37e6434f4e64c7a685e3715ad21e9a upstream.
Under certain conditions uninitialized memory will be accessed.
As described by TCG Trusted Platform Module Library Specification,
rev. 1.59 (Part 3: Commands), if a TPM2_GetCapability is received,
requesting a capability, the TPM in field upgrade mode may return a
zero length list.
Check the property count in tpm2_get_tpm_pt().
Fixes: 2ab3241161 ("tpm: migrate tpm2_get_tpm_pt() to use struct tpm_buf")
Cc: stable@vger.kernel.org
Signed-off-by: Stefan Mahnke-Hartmann <stefan.mahnke-hartmann@infineon.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7e0438f83dc769465ee663bb5dcf8cc154940712 upstream.
The following sequence of operations results in a refcount warning:
1. Open device /dev/tpmrm.
2. Remove module tpm_tis_spi.
3. Write a TPM command to the file descriptor opened at step 1.
------------[ cut here ]------------
WARNING: CPU: 3 PID: 1161 at lib/refcount.c:25 kobject_get+0xa0/0xa4
refcount_t: addition on 0; use-after-free.
Modules linked in: tpm_tis_spi tpm_tis_core tpm mdio_bcm_unimac brcmfmac
sha256_generic libsha256 sha256_arm hci_uart btbcm bluetooth cfg80211 vc4
brcmutil ecdh_generic ecc snd_soc_core crc32_arm_ce libaes
raspberrypi_hwmon ac97_bus snd_pcm_dmaengine bcm2711_thermal snd_pcm
snd_timer genet snd phy_generic soundcore [last unloaded: spi_bcm2835]
CPU: 3 PID: 1161 Comm: hold_open Not tainted 5.10.0ls-main-dirty #2
Hardware name: BCM2711
[<c0410c3c>] (unwind_backtrace) from [<c040b580>] (show_stack+0x10/0x14)
[<c040b580>] (show_stack) from [<c1092174>] (dump_stack+0xc4/0xd8)
[<c1092174>] (dump_stack) from [<c0445a30>] (__warn+0x104/0x108)
[<c0445a30>] (__warn) from [<c0445aa8>] (warn_slowpath_fmt+0x74/0xb8)
[<c0445aa8>] (warn_slowpath_fmt) from [<c08435d0>] (kobject_get+0xa0/0xa4)
[<c08435d0>] (kobject_get) from [<bf0a715c>] (tpm_try_get_ops+0x14/0x54 [tpm])
[<bf0a715c>] (tpm_try_get_ops [tpm]) from [<bf0a7d6c>] (tpm_common_write+0x38/0x60 [tpm])
[<bf0a7d6c>] (tpm_common_write [tpm]) from [<c05a7ac0>] (vfs_write+0xc4/0x3c0)
[<c05a7ac0>] (vfs_write) from [<c05a7ee4>] (ksys_write+0x58/0xcc)
[<c05a7ee4>] (ksys_write) from [<c04001a0>] (ret_fast_syscall+0x0/0x4c)
Exception stack(0xc226bfa8 to 0xc226bff0)
bfa0: 00000000 000105b4 00000003 beafe664 00000014 00000000
bfc0: 00000000 000105b4 000103f8 00000004 00000000 00000000 b6f9c000 beafe684
bfe0: 0000006c beafe648 0001056c b6eb6944
---[ end trace d4b8409def9b8b1f ]---
The reason for this warning is the attempt to get the chip->dev reference
in tpm_common_write() although the reference counter is already zero.
Since commit 8979b02aaf ("tpm: Fix reference count to main device") the
extra reference used to prevent a premature zero counter is never taken,
because the required TPM_CHIP_FLAG_TPM2 flag is never set.
Fix this by moving the TPM 2 character device handling from
tpm_chip_alloc() to tpm_add_char_device() which is called at a later point
in time when the flag has been set in case of TPM2.
Commit fdc915f7f7 ("tpm: expose spaces via a device link /dev/tpmrm<n>")
already introduced function tpm_devs_release() to release the extra
reference but did not implement the required put on chip->devs that results
in the call of this function.
Fix this by putting chip->devs in tpm_chip_unregister().
Finally move the new implementation for the TPM 2 handling into a new
function to avoid multiple checks for the TPM_CHIP_FLAG_TPM2 flag in the
good case and error cases.
Cc: stable@vger.kernel.org
Fixes: fdc915f7f7 ("tpm: expose spaces via a device link /dev/tpmrm<n>")
Fixes: 8979b02aaf ("tpm: Fix reference count to main device")
Co-developed-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fb5abce6b2bb5cb3d628aaa63fa821da8c4600f9 upstream.
As part of the series conversion to remove nested TPM operations:
https://lore.kernel.org/all/20190205224723.19671-1-jarkko.sakkinen@linux.intel.com/
exposure of the chip->tpm_mutex was removed from much of the upper
level code. In this conversion, tpm2_del_space() was missed. This
didn't matter much because it's usually called closely after a
converted operation, so there's only a very tiny race window where the
chip can be removed before the space flushing is done which causes a
NULL deref on the mutex. However, there are reports of this window
being hit in practice, so fix this by converting tpm2_del_space() to
use tpm_try_get_ops(), which performs all the teardown checks before
acquring the mutex.
Cc: stable@vger.kernel.org # 5.4.x
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2e8e4c8f6673247e22efc7985ce5497accd16f88 upstream.
When an invalid (non existing) handle is used in a TPM command,
that uses the resource manager interface (/dev/tpmrm0) the resource
manager tries to load it from its internal cache, but fails and
the tpm_dev_transmit returns an -EINVAL error to the caller.
The existing async handler doesn't handle these error cases
currently and the condition in the poll handler never returns
mask with EPOLLIN set.
The result is that the poll call blocks and the application gets stuck
until the user_read_timer wakes it up after 120 sec.
Change the tpm_dev_async_work function to handle error conditions
returned from tpm_dev_transmit they are also reflected in the poll mask
and a correct error code could passed back to the caller.
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: <linux-integrity@vger.kernel.org>
Cc: <stable@vger.kernel.org>
Cc: <linux-kernel@vger.kernel.org>
Fixes: 9e1b74a63f ("tpm: add support for nonblocking operation")
Tested-by: Jarkko Sakkinen<jarkko@kernel.org>
Signed-off-by: Tadeusz Struk <tstruk@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Tadeusz Struk <tadeusz.struk@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 84cc69589700b90a4c8d27b481a51fce8cca6051 upstream.
When using the tpm_tis-spi driver on a system missing the physical TPM,
a null pointer exception was observed.
[ 0.938677] Unable to handle kernel NULL pointer dereference at virtual address 00000004
[ 0.939020] pgd = 10c753cb
[ 0.939237] [00000004] *pgd=00000000
[ 0.939808] Internal error: Oops: 5 [#1] SMP ARM
[ 0.940157] CPU: 0 PID: 48 Comm: kworker/u4:1 Not tainted 5.15.10-dd1e40c #1
[ 0.940364] Hardware name: Generic DT based system
[ 0.940601] Workqueue: events_unbound async_run_entry_fn
[ 0.941048] PC is at tpm_tis_remove+0x28/0xb4
[ 0.941196] LR is at tpm_tis_core_init+0x170/0x6ac
This is due to an attempt in 'tpm_tis_remove' to use the drvdata, which
was not initialized in 'tpm_tis_core_init' prior to the first error.
Move the initialization of drvdata earlier so 'tpm_tis_remove' has
access to it.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Fixes: 79ca6f74dae0 ("tpm: fix Atmel TPM crash caused by too frequent queries")
Cc: stable@vger.kernel.org
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e96d52822f5ac0a25de78f95cd23421bcbc93584 ]
Commit 79ca6f74dae0 ("tpm: fix Atmel TPM crash caused by too frequent
queries") has moved some code around without updating the error handling
path.
This is now pointless to 'goto out_err' when neither 'clk_enable()' nor
'ioremap()' have been called yet.
Make a direct return instead to avoid undoing things that have not been
done.
Fixes: 79ca6f74dae0 ("tpm: fix Atmel TPM crash caused by too frequent queries")
Signed-off-by: Christophe Jaillet <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0ef333f5ba7f24f5d8478425c163d3097f1c7afd ]
Locality is not appropriately requested before writing the int mask.
Add the missing boilerplate.
Fixes: e6aef069b6 ("tpm_tis: convert to using locality callbacks")
Signed-off-by: Chen Jun <chenjun102@huawei.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7eba41fe8c7bb01ff3d4b757bd622375792bc720 ]
In commit c46ed2281bbe ("tpm_tis_spi: add missing SPI device ID entries")
we added SPI IDs for all the DT aliases to handle the fact that we always
use SPI modaliases to load modules even when probed via DT however the
mentioned commit missed that the SPI and OF device ID entries did not
match and were different and so DT nodes with compatible
"tcg,tpm_tis-spi" will not match. Add an extra ID for tpm_tis-spi
rather than just fix the existing one since what's currently there is
going to be better for anyone actually using SPI IDs to instantiate.
Fixes: c46ed2281bbe ("tpm_tis_spi: add missing SPI device ID entries")
Fixes: 96c8395e2166 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79ca6f74dae067681a779fd573c2eb59649989bc ]
The Atmel TPM 1.2 chips crash with error
`tpm_try_transmit: send(): error -62` since kernel 4.14.
It is observed from the kernel log after running `tpm_sealdata -z`.
The error thrown from the command is as follows
```
$ tpm_sealdata -z
Tspi_Key_LoadKey failed: 0x00001087 - layer=tddl,
code=0087 (135), I/O error
```
The issue was reproduced with the following Atmel TPM chip:
```
$ tpm_version
T0 TPM 1.2 Version Info:
Chip Version: 1.2.66.1
Spec Level: 2
Errata Revision: 3
TPM Vendor ID: ATML
TPM Version: 01010000
Manufacturer Info: 41544d4c
```
The root cause of the issue is due to the TPM calls to msleep()
were replaced with usleep_range() [1], which reduces
the actual timeout. Via experiments, it is observed that
the original msleep(5) actually sleeps for 15ms.
Because of a known timeout issue in Atmel TPM 1.2 chip,
the shorter timeout than 15ms can cause the error described above.
A few further changes in kernel 4.16 [2] and 4.18 [3, 4] further
reduced the timeout to less than 1ms. With experiments,
the problematic timeout in the latest kernel is the one
for `wait_for_tpm_stat`.
To fix it, the patch reverts the timeout of `wait_for_tpm_stat`
to 15ms for all Atmel TPM 1.2 chips, but leave it untouched
for Ateml TPM 2.0 chip, and chips from other vendors.
As explained above, the chosen 15ms timeout is
the actual timeout before this issue introduced,
thus the old value is used here.
Particularly, TPM_ATML_TIMEOUT_WAIT_STAT_MIN is set to 14700us,
TPM_ATML_TIMEOUT_WAIT_STAT_MIN is set to 15000us according to
the existing TPM_TIMEOUT_RANGE_US (300us).
The fixed has been tested in the system with the affected Atmel chip
with no issues observed after boot up.
References:
[1] 9f3fc7bcdd tpm: replace msleep() with usleep_range() in TPM
1.2/2.0 generic drivers
[2] cf151a9a44 tpm: reduce tpm polling delay in tpm_tis_core
[3] 59f5a6b07f tpm: reduce poll sleep time in tpm_transmit()
[4] 424eaf910c tpm: reduce polling time to usecs for even finer
granularity
Fixes: 9f3fc7bcdd ("tpm: replace msleep() with usleep_range() in TPM 1.2/2.0 generic drivers")
Link: https://patchwork.kernel.org/project/linux-integrity/patch/20200926223150.109645-1-hao.wu@rubrik.com/
Signed-off-by: Hao Wu <hao.wu@rubrik.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a0bcce2b2a169e10eb265c8f0ebdd5ae4c875670 upstream.
The "4 * be32_to_cpu(data->count)" multiplication can potentially
overflow which would lead to memory corruption. Add a check for that.
Cc: stable@vger.kernel.org
Fixes: 745b361e98 ("tpm: infrastructure for TPM spaces")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 047d4226b0bca1cda5267dc68bc8291cce5364ac ]
When rngd is run as root then lots of these types of message will appear
in the kernel log if the TPM has been configured to provide random bytes:
[ 7406.275163] tpm tpm0: tpm_transmit: tpm_recv: error -4
The issue is caused by the following call that is interrupted while
waiting for the TPM's response.
sig = wait_event_interruptible(ibmvtpm->wq, !ibmvtpm->tpm_processing_cmd);
Rather than waiting for the response in the low level driver, have it use
the polling loop in tpm_try_transmit() that uses a command's duration to
poll until a result has been returned by the TPM, thus ending when the
timeout has occurred but not responding to signals and ctrl-c anymore. To
stay in this polling loop extend tpm_ibmvtpm_status() to return
'true' for as long as the vTPM is indicated as being busy in
tpm_processing_cmd. Since the loop requires the TPM's timeouts, get them
now using tpm_get_timeouts() after setting the TPM2 version flag on the
chip.
To recreat the resolved issue start rngd like this:
sudo rngd -r /dev/hwrng -t
sudo rngd -r /dev/tpm0 -t
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1981473
Fixes: 6674ff145e ("tpm_ibmvtpm: properly handle interrupted packet receptions")
Cc: Nayna Jain <nayna@linux.ibm.com>
Cc: George Wilson <gcwilson@linux.ibm.com>
Reported-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit dfb703ad2a8d366b829818a558337be779746575 upstream.
dma-buf backed shared memory cannot be reliably freed and unregistered
during a kexec operation even when tee_shm_free() is called on the shm
from a .shutdown hook. The problem occurs because dma_buf_put() calls
fput() which then uses task_work_add(), with the TWA_RESUME parameter,
to queue tee_shm_release() to be called before the current task returns
to user mode. However, the current task never returns to user mode
before the kexec completes so the memory is never freed nor
unregistered.
Use tee_shm_alloc_kernel_buf() to avoid dma-buf backed shared memory
allocation so that tee_shm_free() can directly call tee_shm_release().
This will ensure that the shm can be freed and unregistered during a
kexec operation.
Fixes: 09e574831b ("tpm/tpm_ftpm_tee: A driver for firmware TPM running inside TEE")
Fixes: 1760eb689e ("tpm/tpm_ftpm_tee: add shutdown call back")
Cc: stable@vger.kernel.org
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0178f9d0f60ba07e09bab57381a3ef18e2c1fd7f upstream.
Do not tear down the system when getting invalid status from a TPM chip.
This can happen when panic-on-warn is used.
Instead, introduce TPM_TIS_INVALID_STATUS bitflag and use it to trigger
once the error reporting per chip. In addition, print out the value of
TPM_STS for improved forensics.
Link: https://lore.kernel.org/keyrings/YKzlTR1AzUigShtZ@kroah.com/
Fixes: 55707d531a ("tpm_tis: Add a check for invalid status")
Cc: stable@vger.kernel.org
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c46ed2281bbe4b84e6f3d4bdfb0e4e9ab813fa9d ]
The SPI core always reports a "MODALIAS=spi:<foo>", even if the device was
registered via OF. This means that this module won't auto-load if a DT has
for example has a node with a compatible "infineon,slb9670" string.
In that case kmod will expect a "MODALIAS=of:N*T*Cinfineon,slb9670" uevent
but instead will get a "MODALIAS=spi:slb9670", which is not present in the
kernel module aliases:
$ modinfo drivers/char/tpm/tpm_tis_spi.ko | grep alias
alias: of:N*T*Cgoogle,cr50C*
alias: of:N*T*Cgoogle,cr50
alias: of:N*T*Ctcg,tpm_tis-spiC*
alias: of:N*T*Ctcg,tpm_tis-spi
alias: of:N*T*Cinfineon,slb9670C*
alias: of:N*T*Cinfineon,slb9670
alias: of:N*T*Cst,st33htpm-spiC*
alias: of:N*T*Cst,st33htpm-spi
alias: spi:cr50
alias: spi:tpm_tis_spi
alias: acpi*:SMO0768:*
To workaround this issue, add in the SPI device ID table all the entries
that are present in the OF device ID table.
Reported-by: Alexander Wellbrock <a.wellbrock@mailbox.org>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8a2d296aaebadd68d9c1f6908667df1d1c84c051 upstream.
Reserve locality in tpm_tis_resume(), as it could be unsert after waking
up from a sleep state.
Cc: stable@vger.kernel.org
Cc: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Reported-by: Hans de Goede <hdegoede@redhat.com>
Fixes: a3fbfae82b ("tpm: take TPM chip power gating out of tpm_transmit()")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1df83992d977355177810c2b711afc30546c81ce upstream.
If the total number of commands queried through TPM2_CAP_COMMANDS is
different from that queried through TPM2_CC_GET_CAPABILITY, it indicates
an unknown error. In this case, an appropriate error code -EFAULT should
be returned. However, we currently do not explicitly assign this error
code to 'rc'. As a result, 0 was incorrectly returned.
Cc: stable@vger.kernel.org
Fixes: 58472f5cd4f6("tpm: validate TPM 2.0 commands")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9716ac65efc8f780549b03bddf41e60c445d4709 upstream.
Avoid allocating memory and reading the host log when a virtual device
is used since this log is of no use to that driver. A virtual
device can be identified through the flag TPM_CHIP_FLAG_VIRTUAL, which
is only set for the tpm_vtpm_proxy driver.
Cc: stable@vger.kernel.org
Fixes: 6f99612e25 ("tpm: Proxy driver for supporting multiple emulated TPMs")
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3dcd15665aca80197333500a4be3900948afccc1 upstream.
Check the eventlog signature before using it. This avoids using an
empty log, as may be the case when QEMU created the ACPI tables,
rather than probing the EFI log next. This resolves an issue where
the EFI log was empty since an empty ACPI log was used.
Cc: stable@vger.kernel.org
Fixes: 85467f63a0 ("tpm: Add support for event log pointer found in TPM2 ACPI table")
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a5665ec2affdba21bff3b0d4d3aed83b3951e8ff upstream.
This is shown with Samsung Chromebook Pro (Caroline) with TPM 1.2
(SLB 9670):
[ 4.324298] TPM returned invalid status
[ 4.324806] WARNING: CPU: 2 PID: 1 at drivers/char/tpm/tpm_tis_core.c:275 tpm_tis_status+0x86/0x8f
Background
==========
TCG PC Client Platform TPM Profile (PTP) Specification, paragraph 6.1 FIFO
Interface Locality Usage per Register, Table 39 Register Behavior Based on
Locality Setting for FIFO - a read attempt to TPM_STS_x Registers returns
0xFF in case of lack of locality.
The fix
=======
Decorate tpm_get_timeouts() with request_locality() and release_locality().
Fixes: a3fbfae82b ("tpm: take TPM chip power gating out of tpm_transmit()")
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Laurent Bigonville <bigon@debian.org>
Cc: stable@vger.kernel.org
Reported-by: Lukasz Majczak <lma@semihalf.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d53a6adfb553969809eb2b736a976ebb5146cd95 upstream.
This is shown with Samsung Chromebook Pro (Caroline) with TPM 1.2
(SLB 9670):
[ 4.324298] TPM returned invalid status
[ 4.324806] WARNING: CPU: 2 PID: 1 at drivers/char/tpm/tpm_tis_core.c:275 tpm_tis_status+0x86/0x8f
Background
==========
TCG PC Client Platform TPM Profile (PTP) Specification, paragraph 6.1 FIFO
Interface Locality Usage per Register, Table 39 Register Behavior Based on
Locality Setting for FIFO - a read attempt to TPM_STS_x Registers returns
0xFF in case of lack of locality.
The fix
=======
Decorate tpm_tis_gen_interrupt() with request_locality() and
release_locality().
Cc: Laurent Bigonville <bigon@debian.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: stable@vger.kernel.org
Fixes: a3fbfae82b ("tpm: take TPM chip power gating out of tpm_transmit()")
Signed-off-by: Lukasz Majczak <lma@semihalf.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8c657a0590de585b1115847c17b34a58025f2f4b upstream.
When TPM 2.0 trusted keys code was moved to the trusted keys subsystem,
the operations were unwrapped from tpm_try_get_ops() and tpm_put_ops(),
which are used to take temporarily the ownership of the TPM chip. The
ownership is only taken inside tpm_send(), but this is not sufficient,
as in the key load TPM2_CC_LOAD, TPM2_CC_UNSEAL and TPM2_FLUSH_CONTEXT
need to be done as a one single atom.
Take the TPM chip ownership before sending anything with
tpm_try_get_ops() and tpm_put_ops(), and use tpm_transmit_cmd() to send
TPM commands instead of tpm_send(), reverting back to the old behaviour.
Fixes: 2e19e10131 ("KEYS: trusted: Move TPM2 trusted keys code")
Reported-by: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: stable@vger.kernel.org
Cc: David Howells <dhowells@redhat.com>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: Sumit Garg <sumit.garg@linaro.org>
Acked-by Sumit Garg <sumit.garg@linaro.org>
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e42acf104d6e0bd7ccd2f09103d5be5e6d3c637c upstream.
The current release locality code seems to be based on the
misunderstanding that the TPM interrupts when a locality is released:
it doesn't, only when the locality is acquired.
Furthermore, there seems to be no point in waiting for the locality to
be released. All it does is penalize the last TPM user. However, if
there's no next TPM user, this is a pointless wait and if there is a
next TPM user, they'll pay the penalty waiting for the new locality
(or possibly not if it's the same as the old locality).
Fix the code by making release_locality as simple write to release
with no waiting for completion.
Cc: stable@ger.kernel.org
Fixes: 33bafe9082 ("tpm_tis: verify locality released before returning from release_locality")
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3d9ae54af1d02a7c0edc55c77d7df2b921e58a87 upstream.
The TPM TIS specification says the TPM signals the acquisition of locality
when the TMP_ACCESS_REQUEST_USE bit goes to one *and* the
TPM_ACCESS_REQUEST_USE bit goes to zero. Currently we only check the
former not the latter, so check both. Adding the check on
TPM_ACCESS_REQUEST_USE should fix the case where the locality is
re-requested before the TPM has released it. In this case the locality may
get released briefly before it is reacquired, which causes all sorts of
problems. However, with the added check, TPM_ACCESS_REQUEST_USE should
remain 1 until the second request for the locality is granted.
Cc: stable@ger.kernel.org
Fixes: 27084efee0 ("[PATCH] tpm: driver for next generation TPM chips")
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mimic the pre-existing ACPI and Device Tree event log behavior by not
creating the binary_bios_measurements file when the EFI TPM event log is
empty.
This fixes the following NULL pointer dereference that can occur when
reading /sys/kernel/security/tpm0/binary_bios_measurements after the
kernel received an empty event log from the firmware:
BUG: kernel NULL pointer dereference, address: 000000000000002c
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 2 PID: 3932 Comm: fwupdtpmevlog Not tainted 5.9.0-00003-g629990edad62 #17
Hardware name: LENOVO 20LCS03L00/20LCS03L00, BIOS N27ET38W (1.24 ) 11/28/2019
RIP: 0010:tpm2_bios_measurements_start+0x3a/0x550
Code: 54 53 48 83 ec 68 48 8b 57 70 48 8b 1e 65 48 8b 04 25 28 00 00 00 48 89 45 d0 31 c0 48 8b 82 c0 06 00 00 48 8b 8a c8 06 00 00 <44> 8b 60 1c 48 89 4d a0 4c 89 e2 49 83 c4 20 48 83 fb 00 75 2a 49
RSP: 0018:ffffa9c901203db0 EFLAGS: 00010246
RAX: 0000000000000010 RBX: 0000000000000000 RCX: 0000000000000010
RDX: ffff8ba1eb99c000 RSI: ffff8ba1e4ce8280 RDI: ffff8ba1e4ce8258
RBP: ffffa9c901203e40 R08: ffffa9c901203dd8 R09: ffff8ba1ec443300
R10: ffffa9c901203e50 R11: 0000000000000000 R12: ffff8ba1e4ce8280
R13: ffffa9c901203ef0 R14: ffffa9c901203ef0 R15: ffff8ba1e4ce8258
FS: 00007f6595460880(0000) GS:ffff8ba1ef880000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000000002c CR3: 00000007d8d18003 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
? __kmalloc_node+0x113/0x320
? kvmalloc_node+0x31/0x80
seq_read+0x94/0x420
vfs_read+0xa7/0x190
ksys_read+0xa7/0xe0
__x64_sys_read+0x1a/0x20
do_syscall_64+0x37/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xa9
In this situation, the bios_event_log pointer in the tpm_bios_log struct
was not NULL but was equal to the ZERO_SIZE_PTR (0x10) value. This was
due to the following kmemdup() in tpm_read_log_efi():
int tpm_read_log_efi(struct tpm_chip *chip)
{
...
/* malloc EventLog space */
log->bios_event_log = kmemdup(log_tbl->log, log_size, GFP_KERNEL);
if (!log->bios_event_log) {
ret = -ENOMEM;
goto out;
}
...
}
When log_size is zero, due to an empty event log from firmware,
ZERO_SIZE_PTR is returned from kmemdup(). Upon a read of the
binary_bios_measurements file, the tpm2_bios_measurements_start()
function does not perform a ZERO_OR_NULL_PTR() check on the
bios_event_log pointer before dereferencing it.
Rather than add a ZERO_OR_NULL_PTR() check in functions that make use of
the bios_event_log pointer, simply avoid creating the
binary_bios_measurements_file as is done in other event log retrieval
backends.
Explicitly ignore all of the events in the final event log when the main
event log is empty. The list of events in the final event log cannot be
accurately parsed without referring to the first event in the main event
log (the event log header) so the final event log is useless in such a
situation.
Fixes: 58cc1e4faf ("tpm: parse TPM event logs based on EFI table")
Link: https://lore.kernel.org/linux-integrity/E1FDCCCB-CA51-4AEE-AC83-9CDE995EAE52@canonical.com/
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reported-by: Kenneth R. Crudup <kenny@panix.com>
Reported-by: Mimi Zohar <zohar@linux.ibm.com>
Cc: Thiébaud Weksteen <tweek@google.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
There is a misconfiguration in the bios of the gpio pin used for the
interrupt in the T490s. When interrupts are enabled in the tpm_tis
driver code this results in an interrupt storm. This was initially
reported when we attempted to enable the interrupt code in the tpm_tis
driver, which previously wasn't setting a flag to enable it. Due to
the reports of the interrupt storm that code was reverted and we went back
to polling instead of using interrupts. Now that we know the T490s problem
is a firmware issue, add code to check if the system is a T490s and
disable interrupts if that is the case. This will allow us to enable
interrupts for everyone else. If the user has a fixed bios they can
force the enabling of interrupts with tpm_tis.interrupts=1 on the
kernel command line.
Cc: Peter Huewe <peterhuewe@gmx.de>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Some TIS based TPMs can return 0xff to status reads if the locality
hasn't been properly requested. Detect this condition by checking the
bits that the TIS spec specifies must return zero are clear and return
zero in that case. Also drop a warning so the problem can be
identified in the calling path and fixed (usually a missing
try_get_ops()).
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
When fitted, the SynQuacer platform exposes its SPI TPM via a MMIO
window that is backed by the SPI command sequencer in the SPI bus
controller. This arrangement has the limitation that only byte size
accesses are supported, and so we'll need to provide a separate module
that take this into account.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
