commit afd30525a659ac0ae0904f0cb4a2ca75522c3123 upstream.
USERGS_SYSRET64 is used to return from a syscall via SYSRET, but
a Xen PV guest will nevertheless use the IRET hypercall, as there
is no sysret PV hypercall defined.
So instead of testing all the prerequisites for doing a sysret and
then mangling the stack for Xen PV again for doing an iret just use
the iret exit from the beginning.
This can easily be done via an ALTERNATIVE like it is done for the
sysenter compat case already.
It should be noted that this drops the optimization in Xen for not
restoring a few registers when returning to user mode, but it seems
as if the saved instructions in the kernel more than compensate for
this drop (a kernel build in a Xen PV guest was slightly faster with
this patch applied).
While at it remove the stale sysret32 remnants.
[ pawan: Brad Spengler and Salvatore Bonaccorso <carnil@debian.org>
reported a problem with the 5.10 backport commit edc702b4a8
("x86/entry_64: Add VERW just before userspace transition").
When CONFIG_PARAVIRT_XXL=y, CLEAR_CPU_BUFFERS is not executed in
syscall_return_via_sysret path as USERGS_SYSRET64 is runtime
patched to:
.cpu_usergs_sysret64 = { 0x0f, 0x01, 0xf8,
0x48, 0x0f, 0x07 }, // swapgs; sysretq
which is missing CLEAR_CPU_BUFFERS. It turns out dropping
USERGS_SYSRET64 simplifies the code, allowing CLEAR_CPU_BUFFERS
to be explicitly added to syscall_return_via_sysret path. Below
is with CONFIG_PARAVIRT_XXL=y and this patch applied:
syscall_return_via_sysret:
...
<+342>: swapgs
<+345>: xchg %ax,%ax
<+347>: verw -0x1a2(%rip) <------
<+354>: sysretq
]
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Link: https://lkml.kernel.org/r/20210120135555.32594-6-jgross@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3c7501722e6b31a6e56edd23cea5e77dbb9ffd1a upstream.
Mitigation for MDS is to use VERW instruction to clear any secrets in
CPU Buffers. Any memory accesses after VERW execution can still remain
in CPU buffers. It is safer to execute VERW late in return to user path
to minimize the window in which kernel data can end up in CPU buffers.
There are not many kernel secrets to be had after SWITCH_TO_USER_CR3.
Add support for deploying VERW mitigation after user register state is
restored. This helps minimize the chances of kernel data ending up into
CPU buffers after executing VERW.
Note that the mitigation at the new location is not yet enabled.
Corner case not handled
=======================
Interrupts returning to kernel don't clear CPUs buffers since the
exit-to-user path is expected to do that anyways. But, there could be
a case when an NMI is generated in kernel after the exit-to-user path
has cleared the buffers. This case is not handled and NMI returning to
kernel don't clear CPU buffers because:
1. It is rare to get an NMI after VERW, but before returning to user.
2. For an unprivileged user, there is no known way to make that NMI
less rare or target it.
3. It would take a large number of these precisely-timed NMIs to mount
an actual attack. There's presumably not enough bandwidth.
4. The NMI in question occurs after a VERW, i.e. when user state is
restored and most interesting data is already scrubbed. Whats left
is only the data that NMI touches, and that may or may not be of
any interest.
[ pawan: resolved conflict in syscall_return_via_sysret, added
CLEAR_CPU_BUFFERS to USERGS_SYSRET64 ]
Suggested-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20240213-delay-verw-v8-2-a6216d83edb7%40linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0e25498f8cd43c1b5aa327f373dd094e9a006da7 upstream.
There are two big uses of do_exit. The first is it's design use to be
the guts of the exit(2) system call. The second use is to terminate
a task after something catastrophic has happened like a NULL pointer
in kernel code.
Add a function make_task_dead that is initialy exactly the same as
do_exit to cover the cases where do_exit is called to handle
catastrophic failure. In time this can probably be reduced to just a
light wrapper around do_task_dead. For now keep it exactly the same so
that there will be no behavioral differences introducing this new
concept.
Replace all of the uses of do_exit that use it for catastraphic
task cleanup with make_task_dead to make it clear what the code
is doing.
As part of this rename rewind_stack_do_exit
rewind_stack_and_make_dead.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit b2620facef4889fefcbf2e87284f34dcd4189bce upstream.
If a kernel is built with CONFIG_RETPOLINE=n, but the user still wants
to mitigate Spectre v2 using IBRS or eIBRS, the RSB filling will be
silently disabled.
There's nothing retpoline-specific about RSB buffer filling. Remove the
CONFIG_RETPOLINE guards around it.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a09a6e2399ba0595c3042b3164f3ca68a3cff33e upstream.
Since entry asm is tricky, add a validation pass that ensures the
retbleed mitigation has been done before the first actual RET
instruction.
Entry points are those that either have UNWIND_HINT_ENTRY, which acts
as UNWIND_HINT_EMPTY but marks the instruction as an entry point, or
those that have UWIND_HINT_IRET_REGS at +0.
This is basically a variant of validate_branch() that is
intra-function and it will simply follow all branches from marked
entry points and ensures that all paths lead to ANNOTATE_UNRET_END.
If a path hits RET or an indirection the path is a fail and will be
reported.
There are 3 ANNOTATE_UNRET_END instances:
- UNTRAIN_RET itself
- exception from-kernel; this path doesn't need UNTRAIN_RET
- all early exceptions; these also don't need UNTRAIN_RET
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
[cascardo: arch/x86/entry/entry_64.S no pt_regs return at .Lerror_entry_done_lfence]
[cascardo: tools/objtool/builtin-check.c no link option validation]
[cascardo: tools/objtool/check.c opts.ibt is ibt]
[cascardo: tools/objtool/include/objtool/builtin.h leave unret option as bool, no struct opts]
[cascardo: objtool is still called from scripts/link-vmlinux.sh]
[cascardo: no IBT support]
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
[bwh: Backported to 5.10:
- In scripts/link-vmlinux.sh, use "test -n" instead of is_enabled
- Adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2dbb887e875b1de3ca8f40ddf26bcfe55798c609 upstream.
Implement Kernel IBRS - currently the only known option to mitigate RSB
underflow speculation issues on Skylake hardware.
Note: since IBRS_ENTER requires fuller context established than
UNTRAIN_RET, it must be placed after it. However, since UNTRAIN_RET
itself implies a RET, it must come after IBRS_ENTER. This means
IBRS_ENTER needs to also move UNTRAIN_RET.
Note 2: KERNEL_IBRS is sub-optimal for XenPV.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
[cascardo: conflict at arch/x86/entry/entry_64.S, skip_r11rcx]
[cascardo: conflict at arch/x86/entry/entry_64_compat.S]
[cascardo: conflict fixups, no ANNOTATE_NOENDBR]
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
[bwh: Backported to 5.10: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a149180fbcf336e97ce4eb2cdc13672727feb94d upstream.
Note: needs to be in a section distinct from Retpolines such that the
Retpoline RET substitution cannot possibly use immediate jumps.
ORC unwinding for zen_untrain_ret() and __x86_return_thunk() is a
little tricky but works due to the fact that zen_untrain_ret() doesn't
have any stack ops and as such will emit a single ORC entry at the
start (+0x3f).
Meanwhile, unwinding an IP, including the __x86_return_thunk() one
(+0x40) will search for the largest ORC entry smaller or equal to the
IP, these will find the one ORC entry (+0x3f) and all works.
[ Alexandre: SVM part. ]
[ bp: Build fix, massages. ]
Suggested-by: Andrew Cooper <Andrew.Cooper3@citrix.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
[cascardo: conflicts at arch/x86/entry/entry_64_compat.S]
[cascardo: there is no ANNOTATE_NOENDBR]
[cascardo: objtool commit 34c861e806478ac2ea4032721defbf1d6967df08 missing]
[cascardo: conflict fixup]
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
[bwh: Backported to 5.10: SEV-ES is not supported, so drop the change
in arch/x86/kvm/svm/vmenter.S]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1b331eeea7b8676fc5dbdf80d0a07e41be226177 upstream.
Yes, r11 and rcx have been restored previously, but since they're being
popped anyway (into rsi) might as well pop them into their own regs --
setting them to the value they already are.
Less magical code.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220506121631.365070674@infradead.org
[bwh: Backported to 5.10: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f94909ceb1ed4bfdb2ada72f93236305e6d6951f upstream.
Replace all ret/retq instructions with RET in preparation of making
RET a macro. Since AS is case insensitive it's a big no-op without
RET defined.
find arch/x86/ -name \*.S | while read file
do
sed -i 's/\<ret[q]*\>/RET/' $file
done
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211204134907.905503893@infradead.org
[bwh: Backported to 5.10: ran the above command]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c42b145181aafd59ed31ccd879493389e3ea5a08 ]
In idtentry_vc(), vc_switch_off_ist() determines a safe stack to
switch to, off of the IST stack. Annotate the new stack switch with
ENCODE_FRAME_POINTER in case UNWINDER_FRAME_POINTER is used.
A stack walk before looks like this:
CPU: 0 PID: 0 Comm: swapper Not tainted 5.18.0-rc7+ #2
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Call Trace:
<TASK>
dump_stack_lvl
dump_stack
kernel_exc_vmm_communication
asm_exc_vmm_communication
? native_read_msr
? __x2apic_disable.part.0
? x2apic_setup
? cpu_init
? trap_init
? start_kernel
? x86_64_start_reservations
? x86_64_start_kernel
? secondary_startup_64_no_verify
</TASK>
and with the fix, the stack dump is exact:
CPU: 0 PID: 0 Comm: swapper Not tainted 5.18.0-rc7+ #3
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Call Trace:
<TASK>
dump_stack_lvl
dump_stack
kernel_exc_vmm_communication
asm_exc_vmm_communication
RIP: 0010:native_read_msr
Code: ...
< snipped regs >
? __x2apic_disable.part.0
x2apic_setup
cpu_init
trap_init
start_kernel
x86_64_start_reservations
x86_64_start_kernel
secondary_startup_64_no_verify
</TASK>
[ bp: Test in a SEV-ES guest and rewrite the commit message to
explain what exactly this does. ]
Fixes: a13644f3a5 ("x86/entry/64: Add entry code for #VC handler")
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220316041612.71357-1-jiangshanlai@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c07e45553da1808aa802e9f0ffa8108cfeaf7a17 ]
Commit
18ec54fdd6 ("x86/speculation: Prepare entry code for Spectre v1 swapgs mitigations")
added FENCE_SWAPGS_{KERNEL|USER}_ENTRY for conditional SWAPGS. In
paranoid_entry(), it uses only FENCE_SWAPGS_KERNEL_ENTRY for both
branches. This is because the fence is required for both cases since the
CR3 write is conditional even when PTI is enabled.
But
96b2371413 ("x86/entry/64: Switch CR3 before SWAPGS in paranoid entry")
changed the order of SWAPGS and the CR3 write. And it missed the needed
FENCE_SWAPGS_KERNEL_ENTRY for the user gsbase case.
Add it back by changing the branches so that FENCE_SWAPGS_KERNEL_ENTRY
can cover both branches.
[ bp: Massage, fix typos, remove obsolete comment while at it. ]
Fixes: 96b2371413 ("x86/entry/64: Switch CR3 before SWAPGS in paranoid entry")
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211126101209.8613-2-jiangshanlai@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53c9d9240944088274aadbbbafc6138ca462db4f ]
SWAPGS is used only for interrupts coming from user mode or for
returning to user mode. So there is no reason to use the PARAVIRT
framework, as it can easily be replaced by an ALTERNATIVE depending
on X86_FEATURE_XENPV.
There are several instances using the PV-aware SWAPGS macro in paths
which are never executed in a Xen PV guest. Replace those with the
plain swapgs instruction. For SWAPGS_UNSAFE_STACK the same applies.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210120135555.32594-5-jgross@suse.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5c8f6a2e316efebb3ba93d8c1af258155dcf5632 ]
In the native case, PER_CPU_VAR(cpu_tss_rw + TSS_sp0) is the
trampoline stack. But XEN pv doesn't use trampoline stack, so
PER_CPU_VAR(cpu_tss_rw + TSS_sp0) is also the kernel stack.
In that case, source and destination stacks are identical, which means
that reusing swapgs_restore_regs_and_return_to_usermode() in XEN pv
would cause %rsp to move up to the top of the kernel stack and leave the
IRET frame below %rsp.
This is dangerous as it can be corrupted if #NMI / #MC hit as either of
these events occurring in the middle of the stack pushing would clobber
data on the (original) stack.
And, with XEN pv, swapgs_restore_regs_and_return_to_usermode() pushing
the IRET frame on to the original address is useless and error-prone
when there is any future attempt to modify the code.
[ bp: Massage commit message. ]
Fixes: 7f2590a110 ("x86/entry/64: Use a per-CPU trampoline stack for IDT entries")
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lkml.kernel.org/r/20211126101209.8613-4-jiangshanlai@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1367afaa2ee90d1c956dfc224e199fcb3ff3f8cc ]
The commit
c758907004 ("x86/entry/64: Remove unneeded kernel CR3 switching")
removed a CR3 write in the faulting path of load_gs_index().
But the path's FENCE_SWAPGS_USER_ENTRY has no fence operation if PTI is
enabled, see spectre_v1_select_mitigation().
Rather, it depended on the serializing CR3 write of SWITCH_TO_KERNEL_CR3
and since it got removed, add a FENCE_SWAPGS_KERNEL_ENTRY call to make
sure speculation is blocked.
[ bp: Massage commit message and comment. ]
Fixes: c758907004 ("x86/entry/64: Remove unneeded kernel CR3 switching")
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211126101209.8613-3-jiangshanlai@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be1a5408868af341f61f93c191b5e346ee88c82a ]
Split up the #VC handler code into a from-user and a from-kernel part.
This allows clean and correct state tracking, as the #VC handler needs
to enter NMI-state when raised from kernel mode and plain IRQ state when
raised from user-mode.
Fixes: 62441a1fb532 ("x86/sev-es: Correctly track IRQ states in runtime #VC handler")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210618115409.22735-3-joro@8bytes.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pull x86 SEV-ES support from Borislav Petkov:
"SEV-ES enhances the current guest memory encryption support called SEV
by also encrypting the guest register state, making the registers
inaccessible to the hypervisor by en-/decrypting them on world
switches. Thus, it adds additional protection to Linux guests against
exfiltration, control flow and rollback attacks.
With SEV-ES, the guest is in full control of what registers the
hypervisor can access. This is provided by a guest-host exchange
mechanism based on a new exception vector called VMM Communication
Exception (#VC), a new instruction called VMGEXIT and a shared
Guest-Host Communication Block which is a decrypted page shared
between the guest and the hypervisor.
Intercepts to the hypervisor become #VC exceptions in an SEV-ES guest
so in order for that exception mechanism to work, the early x86 init
code needed to be made able to handle exceptions, which, in itself,
brings a bunch of very nice cleanups and improvements to the early
boot code like an early page fault handler, allowing for on-demand
building of the identity mapping. With that, !KASLR configurations do
not use the EFI page table anymore but switch to a kernel-controlled
one.
The main part of this series adds the support for that new exchange
mechanism. The goal has been to keep this as much as possibly separate
from the core x86 code by concentrating the machinery in two
SEV-ES-specific files:
arch/x86/kernel/sev-es-shared.c
arch/x86/kernel/sev-es.c
Other interaction with core x86 code has been kept at minimum and
behind static keys to minimize the performance impact on !SEV-ES
setups.
Work by Joerg Roedel and Thomas Lendacky and others"
* tag 'x86_seves_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (73 commits)
x86/sev-es: Use GHCB accessor for setting the MMIO scratch buffer
x86/sev-es: Check required CPU features for SEV-ES
x86/efi: Add GHCB mappings when SEV-ES is active
x86/sev-es: Handle NMI State
x86/sev-es: Support CPU offline/online
x86/head/64: Don't call verify_cpu() on starting APs
x86/smpboot: Load TSS and getcpu GDT entry before loading IDT
x86/realmode: Setup AP jump table
x86/realmode: Add SEV-ES specific trampoline entry point
x86/vmware: Add VMware-specific handling for VMMCALL under SEV-ES
x86/kvm: Add KVM-specific VMMCALL handling under SEV-ES
x86/paravirt: Allow hypervisor-specific VMMCALL handling under SEV-ES
x86/sev-es: Handle #DB Events
x86/sev-es: Handle #AC Events
x86/sev-es: Handle VMMCALL Events
x86/sev-es: Handle MWAIT/MWAITX Events
x86/sev-es: Handle MONITOR/MONITORX Events
x86/sev-es: Handle INVD Events
x86/sev-es: Handle RDPMC Events
x86/sev-es: Handle RDTSC(P) Events
...
Pull x86 paravirt cleanup from Ingo Molnar:
"Clean up the paravirt code after the removal of 32-bit Xen PV support"
* tag 'x86-paravirt-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/paravirt: Avoid needless paravirt step clearing page table entries
x86/paravirt: Remove set_pte_at() pv-op
x86/entry/32: Simplify CONFIG_XEN_PV build dependency
x86/paravirt: Use CONFIG_PARAVIRT_XXL instead of CONFIG_PARAVIRT
x86/paravirt: Clean up paravirt macros
x86/paravirt: Remove 32-bit support from CONFIG_PARAVIRT_XXL
Pull x86 fsgsbase updates from Borislav Petkov:
"Misc minor cleanups and corrections to the fsgsbase code and
respective selftests"
* tag 'x86_fsgsbase_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests/x86/fsgsbase: Test PTRACE_PEEKUSER for GSBASE with invalid LDT GS
selftests/x86/fsgsbase: Reap a forgotten child
x86/fsgsbase: Replace static_cpu_has() with boot_cpu_has()
x86/entry/64: Correct the comment over SAVE_AND_SET_GSBASE
The #VC handler needs special entry code because:
1. It runs on an IST stack
2. It needs to be able to handle nested #VC exceptions
To make this work, the entry code is implemented to pretend it doesn't
use an IST stack. When entered from user-mode or early SYSCALL entry
path it switches to the task stack. If entered from kernel-mode it tries
to switch back to the previous stack in the IRET frame.
The stack found in the IRET frame is validated first, and if it is not
safe to use it for the #VC handler, the code will switch to a
fall-back stack (the #VC2 IST stack). From there, it can cause nested
exceptions again.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-46-joro@8bytes.org
Pull x86 fsgsbase from Thomas Gleixner:
"Support for FSGSBASE. Almost 5 years after the first RFC to support
it, this has been brought into a shape which is maintainable and
actually works.
This final version was done by Sasha Levin who took it up after Intel
dropped the ball. Sasha discovered that the SGX (sic!) offerings out
there ship rogue kernel modules enabling FSGSBASE behind the kernels
back which opens an instantanious unpriviledged root hole.
The FSGSBASE instructions provide a considerable speedup of the
context switch path and enable user space to write GSBASE without
kernel interaction. This enablement requires careful handling of the
exception entries which go through the paranoid entry path as they
can no longer rely on the assumption that user GSBASE is positive (as
enforced via prctl() on non FSGSBASE enabled systemn).
All other entries (syscalls, interrupts and exceptions) can still just
utilize SWAPGS unconditionally when the entry comes from user space.
Converting these entries to use FSGSBASE has no benefit as SWAPGS is
only marginally slower than WRGSBASE and locating and retrieving the
kernel GSBASE value is not a free operation either. The real benefit
of RD/WRGSBASE is the avoidance of the MSR reads and writes.
The changes come with appropriate selftests and have held up in field
testing against the (sanitized) Graphene-SGX driver"
* tag 'x86-fsgsbase-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
x86/fsgsbase: Fix Xen PV support
x86/ptrace: Fix 32-bit PTRACE_SETREGS vs fsbase and gsbase
selftests/x86/fsgsbase: Add a missing memory constraint
selftests/x86/fsgsbase: Fix a comment in the ptrace_write_gsbase test
selftests/x86: Add a syscall_arg_fault_64 test for negative GSBASE
selftests/x86/fsgsbase: Test ptracer-induced GS base write with FSGSBASE
selftests/x86/fsgsbase: Test GS selector on ptracer-induced GS base write
Documentation/x86/64: Add documentation for GS/FS addressing mode
x86/elf: Enumerate kernel FSGSBASE capability in AT_HWCAP2
x86/cpu: Enable FSGSBASE on 64bit by default and add a chicken bit
x86/entry/64: Handle FSGSBASE enabled paranoid entry/exit
x86/entry/64: Introduce the FIND_PERCPU_BASE macro
x86/entry/64: Switch CR3 before SWAPGS in paranoid entry
x86/speculation/swapgs: Check FSGSBASE in enabling SWAPGS mitigation
x86/process/64: Use FSGSBASE instructions on thread copy and ptrace
x86/process/64: Use FSBSBASE in switch_to() if available
x86/process/64: Make save_fsgs_for_kvm() ready for FSGSBASE
x86/fsgsbase/64: Enable FSGSBASE instructions in helper functions
x86/fsgsbase/64: Add intrinsics for FSGSBASE instructions
x86/cpu: Add 'unsafe_fsgsbase' to enable CR4.FSGSBASE
...
Pull x86 conversion to generic entry code from Thomas Gleixner:
"The conversion of X86 syscall, interrupt and exception entry/exit
handling to the generic code.
Pretty much a straight-forward 1:1 conversion plus the consolidation
of the KVM handling of pending work before entering guest mode"
* tag 'x86-entry-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kvm: Use __xfer_to_guest_mode_work_pending() in kvm_run_vcpu()
x86/kvm: Use generic xfer to guest work function
x86/entry: Cleanup idtentry_enter/exit
x86/entry: Use generic interrupt entry/exit code
x86/entry: Cleanup idtentry_entry/exit_user
x86/entry: Use generic syscall exit functionality
x86/entry: Use generic syscall entry function
x86/ptrace: Provide pt_regs helper for entry/exit
x86/entry: Move user return notifier out of loop
x86/entry: Consolidate 32/64 bit syscall entry
x86/entry: Consolidate check_user_regs()
x86: Correct noinstr qualifiers
x86/idtentry: Remove stale comment
To allow the kernel not to play games with set_fs to call exec
implement kernel_execve. The function kernel_execve takes pointers
into kernel memory and copies the values pointed to onto the new
userspace stack.
The calls with arguments from kernel space of do_execve are replaced
with calls to kernel_execve.
The calls do_execve and do_execveat are made static as there are now
no callers outside of exec.
The comments that mention do_execve are updated to refer to
kernel_execve or execve depending on the circumstances. In addition
to correcting the comments, this makes it easy to grep for do_execve
and verify it is not used.
Inspired-by: https://lkml.kernel.org/r/20200627072704.2447163-1-hch@lst.de
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/87wo365ikj.fsf@x220.int.ebiederm.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Without FSGSBASE, user space cannot change GSBASE other than through a
PRCTL. The kernel enforces that the user space GSBASE value is postive as
negative values are used for detecting the kernel space GSBASE value in the
paranoid entry code.
If FSGSBASE is enabled, user space can set arbitrary GSBASE values without
kernel intervention, including negative ones, which breaks the paranoid
entry assumptions.
To avoid this, paranoid entry needs to unconditionally save the current
GSBASE value independent of the interrupted context, retrieve and write the
kernel GSBASE and unconditionally restore the saved value on exit. The
restore happens either in paranoid_exit or in the special exit path of the
NMI low level code.
All other entry code pathes which use unconditional SWAPGS are not affected
as they do not depend on the actual content.
[ tglx: Massaged changelogs and comments ]
Suggested-by: H. Peter Anvin <hpa@zytor.com>
Suggested-by: Andy Lutomirski <luto@kernel.org>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1557309753-24073-13-git-send-email-chang.seok.bae@intel.com
Link: https://lkml.kernel.org/r/20200528201402.1708239-12-sashal@kernel.org
The entry rework moved interrupt entry code from the irqentry to the
noinstr section which made the irqentry section empty.
This breaks boundary checks which rely on the __irqentry_text_start/end
markers to find out whether a function in a stack trace is
interrupt/exception entry code. This affects the function graph tracer and
filter_irq_stacks().
As the IDT entry points are all sequentialy emitted this is rather simple
to unbreak by injecting __irqentry_text_start/end as global labels.
To make this work correctly:
- Remove the IRQENTRY_TEXT section from the x86 linker script
- Define __irqentry so it breaks the build if it's used
- Adjust the entry mirroring in PTI
- Remove the redundant kprobes and unwinder bound checks
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Both #DB itself, as all other IST users (NMI, #MC) now clear DR7 on
entry. Combined with not allowing breakpoints on entry/noinstr/NOKPROBE
text and no single step (EFLAGS.TF) inside the #DB handler should guarantee
no nested #DB.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200529213321.303027161@infradead.org
Convert the last oldstyle defined vector to IDTENTRY_SYSVEC:
- Implement the C entry point with DEFINE_IDTENTRY_SYSVEC
- Emit the ASM stub with DECLARE_IDTENTRY_SYSVEC
- Remove the ASM idtentries in 64-bit
- Remove the BUILD_INTERRUPT entries in 32-bit
- Remove the old prototypes
Fixup the related XEN code by providing the primary C entry point in x86 to
avoid cluttering the generic code with X86'isms.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202119.741950104@linutronix.de
Convert various hypervisor vectors to IDTENTRY_SYSVEC:
- Implement the C entry point with DEFINE_IDTENTRY_SYSVEC
- Emit the ASM stub with DECLARE_IDTENTRY_SYSVEC
- Remove the ASM idtentries in 64-bit
- Remove the BUILD_INTERRUPT entries in 32-bit
- Remove the old prototypes
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20200521202119.647997594@linutronix.de
Convert KVM specific system vectors to IDTENTRY_SYSVEC*:
The two empty stub handlers which only increment the stats counter do no
need to run on the interrupt stack. Use IDTENTRY_SYSVEC_SIMPLE for them.
The wakeup handler does more work and runs on the interrupt stack.
None of these handlers need to save and restore the irq_regs pointer.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202119.555715519@linutronix.de
Convert various system vectors to IDTENTRY_SYSVEC:
- Implement the C entry point with DEFINE_IDTENTRY_SYSVEC
- Emit the ASM stub with DECLARE_IDTENTRY_SYSVEC
- Remove the ASM idtentries in 64-bit
- Remove the BUILD_INTERRUPT entries in 32-bit
- Remove the old prototypes
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202119.464812973@linutronix.de
Convert SMP system vectors to IDTENTRY_SYSVEC:
- Implement the C entry point with DEFINE_IDTENTRY_SYSVEC
- Emit the ASM stub with DECLARE_IDTENTRY_SYSVEC
- Remove the ASM idtentries in 64-bit
- Remove the BUILD_INTERRUPT entries in 32-bit
- Remove the old prototypes
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202119.372234635@linutronix.de
Convert APIC interrupts to IDTENTRY_SYSVEC:
- Implement the C entry point with DEFINE_IDTENTRY_SYSVEC
- Emit the ASM stub with DECLARE_IDTENTRY_SYSVEC
- Remove the ASM idtentries in 64-bit
- Remove the BUILD_INTERRUPT entries in 32-bit
- Remove the old prototypes
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202119.280728850@linutronix.de
Provide IDTENTRY variants for system vectors to consolidate the different
mechanisms to emit the ASM stubs for 32- and 64-bit.
On 64-bit this also moves the stack switching from ASM to C code. 32-bit will
excute the system vectors w/o stack switching as before.
The simple variant is meant for "empty" system vectors like scheduler IPI
and KVM posted interrupt vectors. These do not need the full glory of irq
enter/exit handling with softirq processing and more.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202119.185317067@linutronix.de
Replace the extra interrupt handling code and reuse the existing idtentry
machinery. This moves the irq stack switching on 64-bit from ASM to C code;
32-bit already does the stack switching in C.
This requires to remove HAVE_IRQ_EXIT_ON_IRQ_STACK as the stack switch is
not longer in the low level entry code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202119.078690991@linutronix.de
Provide a seperate IDTENTRY macro for device interrupts. Similar to
IDTENTRY_ERRORCODE with the addition of invoking irq_enter/exit_rcu() and
providing the errorcode as a 'u8' argument to the C function, which
truncates the sign extended vector number.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202118.984573165@linutronix.de
Device interrupts which go through do_IRQ() or the spurious interrupt
handler have their separate entry code on 64 bit for no good reason.
Both 32 and 64 bit transport the vector number through ORIG_[RE]AX in
pt_regs. Further the vector number is forced to fit into an u8 and is
complemented and offset by 0x80 so it's in the signed character
range. Otherwise GAS would expand the pushq to a 5 byte instruction for any
vector > 0x7F.
Treat the vector number like an error code and hand it to the C function as
argument. This allows to get rid of the extra entry code in a later step.
Simplify the error code push magic by implementing the pushq imm8 via a
'.byte 0x6a, vector' sequence so GAS is not able to screw it up. As the
pushq imm8 is sign extending the resulting error code needs to be truncated
to 8 bits in C code.
Originally-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202118.796915981@linutronix.de
xen_failsafe_callback() is invoked from XEN for two cases:
1. Fault while reloading DS, ES, FS or GS
2. Fault while executing IRET
#1 retries the IRET after XEN has fixed up the segments.
#2 injects a #GP which kills the task
For #1 there is no reason to go through the full exception return path
because the tasks TIF state is still the same. So just going straight to
the IRET path is good enough.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202118.423224507@linutronix.de
Convert page fault exceptions to IDTENTRY_RAW:
- Implement the C entry point with DEFINE_IDTENTRY_RAW
- Add the CR2 read into the exception handler
- Add the idtentry_enter/exit_cond_rcu() invocations in
in the regular page fault handler and in the async PF
part.
- Emit the ASM stub with DECLARE_IDTENTRY_RAW
- Remove the ASM idtentry in 64-bit
- Remove the CR2 read from 64-bit
- Remove the open coded ASM entry code in 32-bit
- Fix up the XEN/PV code
- Remove the old prototypes
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202118.238455120@linutronix.de
