UAPI Changes:
- drm/i915/perf: introduce global sseu pinning
Allow userspace to request at perf/OA open full SSEU configuration
on the system to be able to benchmark 3D workloads, at the cost of not
being able to run media workloads. (Lionel)
Userspace changes: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4021
- drm/i915/perf: add new open param to configure polling of OA buffer
Let application choose how often the OA buffer should be checked on
the CPU side for data availability for choosig between CPU overhead
and realtime nature of data.
Userspace changes: https://patchwork.freedesktop.org/series/74655/
(i915 perf recorder is a tool to capture i915 perf data for viewing
in GPUVis.)
- drm/i915/perf: remove generated code
Removal of the machine generated perf/OA test configurations from i915.
Used by Mesa v17.1-18.0, and shortly replaced by userspace supplied OA
configurations. Removal of configs causes affected Mesa versions to
fall back to earlier kernel behaviour (potentially missing metrics).
(Lionel)
Cross-subsystem Changes:
- Backmerge of drm-next
- Includes tag 'topic/phy-compliance-2020-04-08' from
git://anongit.freedesktop.org/drm/drm-misc
Driver Changes:
- Fix for GitLab issue #27: Support 5k tiled dual DP display on SKL (Ville)
- Fix https://github.com/thesofproject/linux/issues/1719: Broken audio after
S3 resume on JSL platforms. (Kai)
- Add new Tigerlake PCI IDs (Swathi D.)
- Add missing Tigerlake W/As (Matt R.)
- Extended Wa_2006604312 to EHL (Matt A)
- Add DPCD link_rate quirk for Apple 15" MBP 2017 (v3) (Mario)
- Make Wa_14010229206 apply to all Tigerlake steppings (Swathi d)
- Extend hotplug detect retry on TypeC connectors to 5 seconds (Imre)
- Yield the timeslice if caught waiting on a user semaphore (Chris)
- Limit the residual W/A batch to Haswell due to instability on IVB/BYT (Chris)
- TBT AUX should use TC power well ops on Tigerlake (Matt R)
- Update PMINTRMSK holding fw to make it effective for RPS (Francisco, Chris)
- Add YUV444 packed format support for skl+ (Stanislav)
- Invalidate OA TLB when closing perf stream to avoid corruption (Umesh)
- HDCP: fix Ri prime check done during link check (Oliver)
- Rearm heartbeat on sysfs interval change (Chris)
- Fix crtc nv12 etc. plane bitmasks for DPMS off (Ville)
- Treat idling as a RPS downclock event (Chris)
- Leave rps->cur_freq on unpark (Chris)
- Ignore short pulse when EDP panel powered off (Anshuman)
- Keep the engine awake until the next jiffie, to avoid ping-pong on
moderate load (Chris)
- Select the deepest available parking mode for rc6 on IVB (Chris)
- Optimizations to direct submission execlist path (Chris)
- Avoid NULL pointer dereference at intel_read_infoframe() (Chris)
- Fix mode private_flags comparison at atomic_check (Uma, Ville)
- Use forced codec wake on all gen9+ platforms (Kai)
- Schedule oa_config after modifying the contexts (Chris, Lionel)
- Explicitly reset both reg and context runtime on GPU reset (Chris)
- Don't enable DDI IO power on a TypeC port in TBT mode (Imre)
- Fixes to TGL, ICL and EHL vswing tables (Jose)
- Fill all the unused space in the GGTT (Chris, imre)
- Ignore readonly failures when updating relocs (Chris)
- Attempt to find free space earlier for non-pinned VMAs (Chris)
- Only wait for GPU activity before unbinding a GGTT fence (Chris)
- Avoid data loss on small userspace perf OA polling (Ashutosh)
- Watch out for unevictable nodes during eviction (Matt A)
- Reinforce the barrier after GTT updates for Ironlake (Chris)
- Convert various parts of driver to use drm_device based logging (Wambui, Jani)
- Avoid dereferencing already closed context for engine (Chris)
- Enable non-contiguous pipe fusing (Anshuman)
- Add HW readout of Gamma LUT on ICL (Swati S.)
- Use explicit flag to mark unreachable intel_context (Chris)
- Cancel a hung context if already closed (Chris)
- Add DP VSC/HDR SDP data structures and write routines (Gwan-gyeong)
- Report context-is-closed prior to pinning at execbuf (Chris)
- Mark timeline->cacheline as destroyed after rcu grace period (Chris)
- Avoid live-lock with i915_vma_parked() (Chris)
- Avoid gem_context->mutex for simple vma lookup (Chris)
- Rely on direct submission to the queue (Chris)
- Configure DSI transcoder to operate in TE GATE command mode (Vandita)
- Add DI vblank calculation for command mode (Vandita)
- Disable periodic command mode if programmed by GOP (Vandita)
- Use private flags to indicate TE in cmd mode (Vandita)
- Make fences a nice-to-have for FBC on GEN9+ (Jose)
- Fix work queuing issue with mixed virtual engine/physical engine
submissions (Chris)
- Drop final few uses of drm_i915_private.engine (Chris)
- Return early after MISSING_CASE for write_dp_sdp (Chris)
- Include port sync state in the state dump (Ville)
- ELSP workaround switching back to a completed context (Chris)
- Include priority info in trace_ports (Chris)
- Allow for different modes of interruptible i915_active_wait (Chris)
- Split eb_vma into its own allocation (Chris)
- Don't read perf head/tail pointers outside critical section (Lionel)
- Pause CS flow before execlists reset (Chris)
- Make fence revocation unequivocal (Chris)
- Drop cached obj->bind_count (Chris)
- Peek at the next submission for error interrupts (Chris)
- Utilize rcu iteration of context engines (Chris)
- Keep a per-engine request pool for power management ops (Chris)
- Refactor port sync code into normal modeset flow (Ville)
- Check current i915_vma.pin_count status first on unbind (Chris)
- Free request pool from virtual engines (Chris)
- Flush all the reloc_gpu batch (Chris)
- Make exclusive awaits on i915_active optional and allow async waits (Chris)
- Wait until the context is finally retired before releasing engines (Chris)
- Prefer '%ps' for printing function symbol names (Chris)
- Allow setting generic data pointer on intel GT debugfs (Andi)
- Constify DP link computation code more (Ville)
- Simplify MST master transcoder computation (Ville)
- Move TRANS_DDI_FUNC_CTL2 programming where it belongs (Ville)
- Move icl_get_trans_port_sync_config() into the DDI code (Ville)
- Add definitions for VRR registers and bits (Aditya)
- Refactor hardware fence code (Chris)
- Start passing latency as parameter to WM calculation (Stanislav)
- Kernel selftest and debug tracing improvements (Matt A, Chris, Mika)
- Fixes to CI found corner cases and lockdep splats (Chris)
- Overall fixes and refactoring to GEM code (Chris)
- Overall fixes and refactoring to display code (Ville)
- GuC/HuC code improvements (Daniele, Michal Wa)
- Static code checker fixes (Nathan, Ville, Colin, Chris)
- Fix spelling mistake (Chen)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417111548.GA15033@jlahtine-desk.ger.corp.intel.com
Initialize thermal controller fields in the PowerPlay table for Hawaii
GPUs, so that fan speeds are reported.
Signed-off-by: Sandeep Raghuraman <sandy.8925@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The system reboot failed as some IP blocks enter power gate before perform
hw resource destory. Meanwhile use unify interface to set device CGPG to ungate
state can simplify the amdgpu poweroff or reset ungate guard.
Fixes: 487eca11a3 ("drm/amdgpu: fix gfx hang during suspend with video playback (v2)")
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Tested-by: Mengbing Wang <Mengbing.Wang@amd.com>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Original cgroup v2 eBPF code for filtering device access made it
possible to compile with CONFIG_CGROUP_DEVICE=n and still use the eBPF
filtering. Change
commit 4b7d4d453f ("device_cgroup: Export devcgroup_check_permission")
reverted this, making it required to set it to y.
Since the device filtering (and all the docs) for cgroup v2 is no longer
a "device controller" like it was in v1, someone might compile their
kernel with CONFIG_CGROUP_DEVICE=n. Then (for linux 5.5+) the eBPF
filter will not be invoked, and all processes will be allowed access
to all devices, no matter what the eBPF filter says.
Signed-off-by: Odin Ugedal <odin@ugedal.com>
Acked-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Let format prefixes take care of printing the module name
through pr_fmt and dev_fmt definitions.
Signed-off-by: Aurabindo Pillai <mail@aurabindo.in>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu uses lots of pr_* calls for printing error messages.
With this prefix, errors shall be more obvious to the end
use regarding its origin, and may help debugging.
Prefix format:
[xxx.xxxxx] amdgpu: ...
Signed-off-by: Aurabindo Pillai <mail@aurabindo.in>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following gcc warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/dce80/dce80_hw_sequencer.c:43:46:
warning: ‘reg_offsets’ defined but not used [-Wunused-const-variable=]
static const struct dce80_hw_seq_reg_offsets reg_offsets[] = {
^~~~~~~~~~~
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows IPs to flag whether a specific ring requires
a GPU scheduler or not. E.g., sometimes instances of an
IP are asymmetric and have different capabilities.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prefix RAS message printing in GFX IP with PCI device info,
which assists the debug in multiple GPU case.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prefix ras related kernel message logging with PCI
device info by replacing DRM_INFO/WARN/ERROR with
dev_info/warn/err. This can clearly tell user about
GPU device information where ras is. And add some
other ras message printing to make it more clear
and friendly as well.
Suggested-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Uncorrectable error count printing is missed when issuing UMC
UE injection. When going to the error count log function in GPU
recover work thread, there is no chance to get correct error count
value by last error injection and print, because the error status
register is automatically cleared after reading in UMC ecc irq
callback. So add such message printing in UMC ecc irq cb to be
consistent with other RAS error interrupt cases.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If reading dpcd happens ahead of hw initialization, then aconnector is NULL
at this point. This is expected, so there is no need to output an error (which will
spam dmesg.log)
[How]
Change type of message from "error" to "DC_LOG_DC".
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Zhan Liu <zhan.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Under bare metal, there is no more else to take
care of the GPU register access through MMIO.
Under Virtualization, to access GPU register is
implemented through KIQ during run-time due to
world-switch.
Therefore, under SR-IOV user can only access
debugfs to r/w GPU registers when meets all
three conditions below.
- amdgpu_gpu_recovery=0
- TDR happened
- in_gpu_reset=0
v2: merge amdgpu_virt_can_access_debugfs() into
amdgpu_virt_enable_access_debugfs()
v3: drop ret variable in amdgpu_virt_enable_access_debugfs()
and directly return result
Signed-off-by: Yintian Tao <yttao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pull more drm fixes from Dave Airlie:
"As expected, more fixes did turn up in the latter part of the week.
The drm_local_map build regression fix is here, along with temporary
disabling of the hugepage work due to some amdgpu related crashes.
Otherwise it's just a bunch of i915, and amdgpu fixes.
legacy:
- fix drm_local_map.offset type
ttm:
- temporarily disable hugepages to debug amdgpu problems.
prime:
- fix sg extraction
amdgpu:
- Various Renoir fixes
- Fix gfx clockgating sequence on gfx10
- RAS fixes
- Avoid MST property creation after registration
- Various cursor/viewport fixes
- Fix a confusing log message about optional firmwares
i915:
- Flush all the reloc_gpu batch (Chris)
- Ignore readonly failures when updating relocs (Chris)
- Fill all the unused space in the GGTT (Chris)
- Return the right vswing table (Jose)
- Don't enable DDI IO power on a TypeC port in TBT mode for ICL+ (Imre)
analogix_dp:
- probe fix
virtio:
- oob fix in object create"
* tag 'drm-next-2020-04-10' of git://anongit.freedesktop.org/drm/drm: (34 commits)
drm/ttm: Temporarily disable the huge_fault() callback
drm/bridge: analogix_dp: Split bind() into probe() and real bind()
drm/legacy: Fix type for drm_local_map.offset
drm/amdgpu/display: fix warning when compiling without debugfs
drm/amdgpu: unify fw_write_wait for new gfx9 asics
drm/amd/powerplay: error out on forcing clock setting not supported
drm/amdgpu: fix gfx hang during suspend with video playback (v2)
drm/amd/display: Check for null fclk voltage when parsing clock table
drm/amd/display: Acknowledge wm_optimized_required
drm/amd/display: Make cursor source translation adjustment optional
drm/amd/display: Calculate scaling ratios on every medium/full update
drm/amd/display: Program viewport when source pos changes for DCN20 hw seq
drm/amd/display: Fix incorrect cursor pos on scaled primary plane
drm/amd/display: change default pipe_split policy for DCN1
drm/amd/display: Translate cursor position by source rect
drm/amd/display: Update stream adjust in dc_stream_adjust_vmin_vmax
drm/amd/display: Avoid create MST prop after registration
drm/amdgpu/psp: dont warn on missing optional TA's
drm/amdgpu: update RAS related dmesg print
drm/amdgpu: resolve mGPU RAS query instability
...
This sequence is recommended by PMFW team for the baco reset
with PMFW reloaded. And it seems able to address the random
failure seen on Arcturus.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This sequence is recommended by PMFW team for the baco reset
with PMFW reloaded. And it seems able to address the random
failure seen on Arcturus.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Execution will only reach here if the asserted condition is true.
Hence there is no need for the additional check.
Signed-off-by: Aurabindo Pillai <mail@aurabindo.in>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For Arcturus, forcing clock to some specific level is not supported
with 54.18 and onwards SMU firmware. As according to firmware team,
they adopt new gfx dpm tuned parameters which can cover all the use
case in a much smooth way. Thus setting through driver interface
is not needed and maybe do a disservice.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The system will be hang up during S3 suspend because of SMU is pending
for GC not respose the register CP_HQD_ACTIVE access request.This issue
root cause of accessing the GC register under enter GFX CGGPG and can
be fixed by disable GFX CGPG before perform suspend.
v2: Use disable the GFX CGPG instead of RLC safe mode guard.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Tested-by: Mengbing Wang <Mengbing.Wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add debugfs to get HDCP capability. This is also useful for
kms_content_protection igt test.
Use:
cat /sys/kernel/debug/dri/0/DP-1/hdcp_sink_capability
cat /sys/kernel/debug/dri/0/HDMI-A-1/hdcp_sink_capability
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Query the hdcp caps of a link, it is useful and can be reported to the user
[How]
Create a query function and call it during link detect
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is at least 1 VG20 DID that does not have an FRU, and trying to read
that will cause a hang. For now, explicitly support reading the FRU for
Arcturus and for the WKS VG20 DIDs, and skip for everything else.
This re-enables serial number reporting for server cards
v2: Add ASIC check
v3: Don't default to true for pre-VG20
v4: Use DID instead of parsing the VBIOS
v5: Sqaush in overflow warning fix
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
