Currently we're comparing the watermarks between the old and new states
before we've fully computed the new watermarks. In particular
skl_build_pipe_wm() will not account for the amount of ddb space we'll
have. That information is only available during skl_compute_ddb()
which will proceed to zero out any watermark level exceeding the
ddb allocation. If we're short on ddb space this will end up
adding the plane to the state due erronously determining that the
watermarks have changed. Fix the problem by deferring
skl_wm_add_affected_planes() until we have the final watermarks
computed.
Noticed this when trying enable transition watermarks on glk.
We now computed the trans_wm as 28, but we only had 14 blocks
of ddb, and thus skl_compute_ddb() ended up disabling the cursor
trans_wm every time. Thus we ended up adding the cursor to every
commit that didn't actually affect the cursor at all.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200228203552.30273-2-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
The hardware never sees the uv_wm values (apart from
uv_wm.min_ddb_alloc affecting the ddb allocation). Thus there
is no point in comparing uv_wm to determine if we need to
reprogram the watermark registers. So let's check only the
rgb/y watermark in skl_plane_wm_equals(). But let's leave
a comment behind so that the next person reading this doesn't
get as confused as I did when I added this check.
If the ddb allocation ends up changing due to uv_wm
skl_ddb_add_affected_planes() takes care of adding the plane
to the state.
TODO: we should perhaps just eliminate uv_wm from the state
and simply track the min_ddb_alloc for uv instead.
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200228203552.30273-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Variables declared in a switch statement before any case statements
cannot be automatically initialized with compiler instrumentation (as
they are not part of any execution flow). With GCC's proposed automatic
stack variable initialization feature, this triggers a warning (and they
don't get initialized). Clang's automatic stack variable initialization
(via CONFIG_INIT_STACK_ALL=y) doesn't throw a warning, but it also
doesn't initialize such variables[1]. Note that these warnings (or silent
skipping) happen before the dead-store elimination optimization phase,
so even when the automatic initializations are later elided in favor of
direct initializations, the warnings remain.
To avoid these problems, move such variables into the "case" where
they're used or lift them up into the main function body.
drivers/gpu/drm/i915/display/intel_display.c: In function ‘check_digital_port_conflicts’:
drivers/gpu/drm/i915/display/intel_display.c:12963:17: warning: statement will never be executed [-Wswitch-unreachable]
12963 | unsigned int port_mask;
| ^~~~~~~~~
drivers/gpu/drm/i915/intel_pm.c: In function ‘vlv_get_fifo_size’:
drivers/gpu/drm/i915/intel_pm.c:474:7: warning: statement will never be executed [-Wswitch-unreachable]
474 | u32 dsparb, dsparb2, dsparb3;
| ^~~~~~
drivers/gpu/drm/i915/intel_pm.c: In function ‘vlv_atomic_update_fifo’:
drivers/gpu/drm/i915/intel_pm.c:1997:7: warning: statement will never be executed [-Wswitch-unreachable]
1997 | u32 dsparb, dsparb2, dsparb3;
| ^~~~~~
[1] https://bugs.llvm.org/show_bug.cgi?id=44916
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/202002201602.92CADF7D@keescook
Added proper DBuf slice mapping to correspondent
pipes, depending on pipe configuration as stated
in BSpec.
v2:
- Remove unneeded braces
- Stop using macro for DBuf assignments as
it seems to reduce readability.
v3: Start using enabled slices mask in dev_priv
v4: Renamed "enabled_slices" used in dev_priv
to "enabled_dbuf_slices_mask"(Matt Roper)
v5: - Removed redundant parameters from
intel_get_ddb_size function.(Matt Roper)
- Made i915_possible_dbuf_slices static(Matt Roper)
- Renamed total_width into total_width_in_range
so that it now reflects that this is not
a total pipe width but the one in current
dbuf slice allowed range for pipe.(Matt Roper)
- Removed 4th pipe for ICL in DBuf assignment
table(Matt Roper)
- Fixed wrong DBuf slice in DBuf table for TGL
(Matt Roper)
- Added comment regarding why we currently not
using pipe ratio for DBuf assignment for ICL
v6: - Changed u32 to unsigned int in
icl_get_first_dbuf_slice_offset function signature
(Ville Syrjälä)
- Changed also u32 to u8 in dbuf slice mask structure
(Ville Syrjälä)
- Switched from DBUF_S1_BIT to enum + explicit
BIT(DBUF_S1) access(Ville Syrjälä)
- Switched to named initializers in DBuf assignment
arrays(Ville Syrjälä)
- DBuf assignment arrays now use autogeneration tool
from
https://patchwork.freedesktop.org/series/70493/
to avoid typos.
- Renamed i915_find_pipe_conf to *_compute_dbuf_slices
(Ville Syrjälä)
- Changed platforms ordering in skl_compute_dbuf_slices
to be from newest to oldest(Ville Syrjälä)
v7: - Now ORing assigned DBuf slice config always with DBUF_S1
because slice 1 has to be constantly powered on.
(Ville Syrjälä)
v8: - Added pipe_name for neater printing(Ville Syrjälä)
- Renamed width_before_pipe to width_before_pipe_in_range,
to better reflect that now all the calculations are happening
inside DBuf range allowed by current pipe configuration mask
(Ville Syrjälä)
- Shortened FIXME comment message, regarding constant ORing with
DBUF_S1(Ville Syrjälä)
- Added .dbuf_mask named initializer to pipe assignment array
(Ville Syrjälä)
- Edited pipe assignment array to use only single DBuf slice
for gen11 single pipe configurations, until "pipe ratio"
thing is finally sorted out(Ville Syrjälä)
- Removed unused parameter crtc_state for now(Ville Syrjälä)
from icl/tgl_compute_dbuf_slices function
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200202230630.8975-7-stanislav.lisovskiy@intel.com
Start manipulating DBuf slices as a mask,
but not as a total number, as current approach
doesn't give us full control on all combinations
of slices, which we might need(like enabling S2
only can't enabled by setting enabled_slices=1).
Removed wrong code from intel_get_ddb_size as
it doesn't match to BSpec. For now still just
use DBuf slice until proper algorithm is implemented.
Other minor code refactoring to get prepared
for major DBuf assignment changes landed:
- As now enabled slices contain a mask
we still need some value which should
reflect how much DBuf slices are supported
by the platform, now device info contains
num_supported_dbuf_slices.
- Removed unneeded assertion as we are now
manipulating slices in a more proper way.
v2: Start using enabled_slices in dev_priv
v3: "enabled_slices" is now "enabled_dbuf_slices_mask",
as this now sits in dev_priv independently.
v4: - Fixed debug print formatting to hex(Matt Roper)
- Optimized dbuf slice updates to be used only
if slice union is different from current conf(Matt Roper)
- Fixed some functions to be static(Matt Roper)
- Created a parameterized version for DBUF_CTL to
simplify DBuf programming cycle(Matt Roper)
- Removed unrequred field from GEN10_FEATURES(Matt Roper)
v5: - Removed redundant programming dbuf slices helper(Ville Syrjälä)
- Started to use parameterized loop for hw readout to get slices
(Ville Syrjälä)
- Added back assertion checking amount of DBUF slices enabled
after DC states 5/6 transition, also added new assertion
as starting from ICL DMC seems to restore the last DBuf
power state set, rather than power up all dbuf slices
as assertion was previously expecting(Ville Syrjälä)
v6: - Now using enum for DBuf slices in this patch (Ville Syrjälä)
- Removed gen11_assert_dbuf_enabled and put gen9_assert_dbuf_enabled
back, as we really need to have a single unified assert here
however currently enabling always slice 1 is enforced by BSpec,
so we will have to OR enabled slices mask with 1 in order
to be consistent with BSpec, that way we can unify that
assertion and against the actual state from the driver, but
not some hardcoded value.(concluded with Ville)
- Remove parameterized DBUF_CTL version, to extract it to another
patch.(Ville Syrjälä)
v7:
- Removed unneeded hardcoded return value for older gens from
intel_enabled_dbuf_slices_mask - this now is handled in a
unified manner since device info anyway returns max dbuf slices
as 1 for older platforms(Matthew Roper)
- Now using INTEL_INFO(dev_priv)->num_supported_dbuf_slices instead
of intel_dbuf_max_slices function as it is trivial(Matthew Roper)
v8: - Fixed icl_dbuf_disable to disable all dbufs still(Ville Syrjälä)
v9: - Renamed _DBUF_CTL_S to DBUF_CTL_S(Ville Syrjälä)
- Now using power_domain mutex to protect from race condition, which
can occur because intel_dbuf_slices_update might be running in
parallel to gen9_dc_off_power_well_enable being called from
intel_dp_detect for instance, which causes assertion triggered by
race condition, as gen9_assert_dbuf_enabled might preempt this
when registers were already updated, while dev_priv was not.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200202230630.8975-6-stanislav.lisovskiy@intel.com
Now start using parameterized DBUF_CTL instead
of hardcoded, this would allow shorter access
functions when reading or storing entire state.
Tried to implement it in a MMIO_PIPE manner, however
DBUF_CTL1 address is higher than DBUF_CTL2, which
implies that we have to now subtract from base
rather than add.
v2: - Removed unneeded DBUF_CTL_DIST and DBUF_CTL_ADDR
macros. Started to use _PICK construct as suggested
by Matt Roper.
v3: - _DBUF_CTL_S* to DBUF_CTL_S*, changed X to "slice"
in macro(Ville Syrjälä)
- Introduced enum for enumerating DBUF slices(Ville Syrjälä)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200202230630.8975-5-stanislav.lisovskiy@intel.com
Current consensus that it is redundant as
we already have skl_ddb_values struct out there,
also this struct contains only single member
which makes it unnecessary.
v2: As dirty_pipes soon going to be nuked away
from skl_ddb_values, evacuating enabled_slices
to safer in dev_priv.
v3: Changed "enabled_slices" to be "enabled_dbuf_slices_num"
(Matt Roper)
v4: - Wrapped the line getting number of dbuf slices(Matt Roper)
- Removed indeed redundant skl_ddb_values declaration(Matt Roper)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200202230630.8975-2-stanislav.lisovskiy@intel.com
The linetime watermarks really have very little in common with the
plane watermarks. It looks to be cleaner to simply track them in
the crtc_state and program them from the normal modeset/fastset
paths.
The only dark cloud comes from the fact that the register is
still supposedly single buffered. So in theory it might still
need some form of two stage programming. Note that even though
HSW/BDWhave two stage programming we never computed any special
intermediate values for the linetime watermarks, and on SKL+
we don't even have the two stage stuff plugged in since everything
else is double buffered. So let's assume it's all fine and
continue doing what we've been doing.
Actually on HSW/BDW the value should not even change without
a full modeset since it doesn't account for pfit downscaling.
Thus only fastboot might be affected. But on SKL+ the pfit
scaling factor is take into consideration so the value may
change during any fastset.
As a bonus we'll plug this thing into the state
checker/dump now.
v2: Rebase due to bigjoiner prep
v2: Only compute ips linetime for IPS capable pipes.
Bspec says the register values is ignored for other
pipes, but in fact it can't even be written so the
state checker becomes unhappy if we don't compute
it as zero.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200120174728.21095-3-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
i915 features for v5.6:
- Separate hardware and uapi state (Maarten)
- Expose a number of sprite and plane formats (Ville)
- DDC symlink in HDMI connector sysfs directory (Andrzej Pietrasiewicz)
- Improve obj->mm.lock nesting lock annotation (Daniel)
(Includes lockdep changes)
- Selftest improvements across the board (Chris)
- ICL/TGL VDSC support on DSI (Jani, Vandita)
- TGL DSB fixes (Animesh, Lucas, Tvrtko)
- VBT parsing improvements and fixes (Lucas, Matt, José, Jani, Dan Carpenter)
- Fix LPSS vs. PMIC PWM backlight use on BYT/CHT (Hans)
(Includes ACPI+MFD changes)
- Display state, crtc, plane code refactoring (Ville)
- Set opregion chpd value to indicate the driver handles hotplug (Hans de Goede)
- DSI updates and fixes, TGL pipe D support, port mapping (José, Jani, Vandita)
- Make HDCP 2.2 support cover CFL (Juston Li)
- Fix CML PCI IDs and ULT (Shawn Lee)
- CMP-V PCH fix (Imre)
- TGL: Add another TGL PCH ID (James)
- EHL/JSL: Add new PCI IDs (James)
- Rename pipe update tracepoints (Ville)
- Fix FBC on GLK+ (Ville)
- GuC fixes and improvements (Daniele, Don Hiatt, Stuart Summers, Matthew Brost)
- Display debugfs improvements (Ville)
- Hotplug/irq fixes (Matt)
- PSR fixes and improvements (José)
- DRM_I915_GEM_MMAP_OFFSET ioctl (Abdiel)
- Static analysis fixes (Colin Ian King)
- Register sysctl path globally (Venkata Sandeep Dhanalakota)
- Introduce new macros for tracing (Venkata Sandeep Dhanalakota)
- Migrate gt towards intel_uncore_read/write (Andi)
- Add rps frequency translation helpers (Andi)
- Fix TGL transcoder clock off sequence (José)
- Fix TGL port A audio (Kai Vehmanen)
- TGL render decompression (DK)
- GEM/GT improvements and fixes across the board (Chris)
- Couple of backmerges (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Tue 24 Dec 2019 03:20:48 AM AEST
# gpg: using RSA key D398079D26ABEE6F
# gpg: Good signature from "Jani Nikula <jani.nikula@intel.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 1565 A65B 77B0 632E 1124 E59C D398 079D 26AB EE6F
# Conflicts:
# drivers/gpu/drm/i915/display/intel_fbc.c
# drivers/gpu/drm/i915/gt/intel_lrc.c
# drivers/gpu/drm/i915/i915_gem.c
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87lfr3rkry.fsf@intel.com
drm-misc-next for v5.6:
UAPI Changes:
- Add support for DMA-BUF HEAPS.
Cross-subsystem Changes:
- mipi dsi definition updates, pulled into drm-intel as well.
- Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim.
- Remove support for dma-buf kmap/kunmap.
- Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well.
Core Changes:
- Small cleanups to ttm.
- Fix SCDC definition.
- Assorted cleanups to core.
- Add todo to remove load/unload hooks, and use generic fbdev emulation.
- Assorted documentation updates.
- Use blocking ww lock in ttm fault handler.
- Remove drm_fb_helper_fbdev_setup/teardown.
- Warning fixes with W=1 for atomic.
- Use drm_debug_enabled() instead of drm_debug flag testing in various drivers.
- Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted)
- Various kconfig indentation fixes in core and drivers.
- Fix freeing transactions in dp-mst correctly.
- Sean Paul is steping down as core maintainer. :-(
- Add lockdep annotations for atomic locks vs dma-resv.
- Prevent use-after-free for a bad job in drm_scheduler.
- Fill out all block sizes in the P01x and P210 definitions.
- Avoid division by zero in drm/rect, and fix bounds.
- Add drm/rect selftests.
- Add aspect ratio and alternate clocks for HDMI 4k modes.
- Add todo for drm_framebuffer_funcs and fb_create cleanup.
- Drop DRM_AUTH for prime import/export ioctls.
- Clear DP-MST payload id tables downstream when initializating.
- Fix for DSC throughput definition.
- Add extra FEC definitions.
- Fix fake offset in drm_gem_object_funs.mmap.
- Stop using encoder->bridge in core directly
- Handle bridge chaining slightly better.
- Add backlight support to drm/panel, and use it in many panel drivers.
- Increase max number of y420 modes from 128 to 256, as preparation to add the new modes.
Driver Changes:
- Small fixes all over.
- Fix documentation in vkms.
- Fix mmap_sem vs dma_resv in nouveau.
- Small cleanup in komeda.
- Add page flip support in gma500 for psb/cdv.
- Add ddc symlink in the connector sysfs directory for many drivers.
- Add support for analogic an6345, and fix small bugs in it.
- Add atomic modesetting support to ast.
- Fix radeon fault handler VMA race.
- Switch udl to use generic shmem helpers.
- Unconditional vblank handling for mcde.
- Miscellaneous fixes to mcde.
- Tweak debug output from komeda using debugfs.
- Add gamma and color transform support to komeda for DOU-IPS.
- Add support for sony acx424AKP panel.
- Various small cleanups to gma500.
- Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation.
- Add support for Logic PD Type 28 panel.
- Use drm_panel_* wrapper functions in exynos/tegra/msm.
- Add devicetree bindings for generic DSI panels.
- Don't include drm_pci.h directly in many drivers.
- Add support for begin/end_cpu_access in udmabuf.
- Stop using drm_get_pci_dev in gma500 and mga200.
- Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access.
- Add devfreq thermal support to panfrost.
- Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager.
- meson: Add support for OSD1 plane AFBC commit.
- Stop displaying garbage when toggling ast primary plane on/off.
- More cleanups and fixes to UDL.
- Add D32 suport to komeda.
- Remove globle copy of drm_dev in gma500.
- Add support for Boe Himax8279d MIPI-DSI LCD panel.
- Add support for ingenic JZ4770 panel.
- Small null pointer deference fix in ingenic.
- Remove support for the special tfp420 driver, as there is a generic way to do it.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ba73535a-9334-5302-2e1f-5208bd7390bd@linux.intel.com
Currently we're blindly poking at the frame start delay bits
in PIPECONF when trying to sanitize the hardware state. Those
bits decided to move elsewhere on HSW, so on many platforms
we're not doing anything at all here. Also we're forgetting
about the PCH transcoder entirely.
Add all the bit definitions for the various homes these bits
have had throughout the years, and reset them all to zero.
However I'm not entirely sure this is a safe thing to do. If
not I guess we'd want full readout+statecheck for this stuff.
For now let's stick to the current logic and hope for the
best.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191024122138.25065-3-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Backmerge to get dfce90259d ("Backmerge i915 security patches from
commit 'ea0b163b13ff' into drm-next") and thus 100d46bd72 ("Merge
Intel Gen8/Gen9 graphics fixes from Jon Bloomfield.").
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
This backmerges the branch that ended up in Linus' tree. It removes
all the changes for the rc6 patches from Linus' tree in favour of
a patch that is based on a large refactor that occured.
Otherwise it all looks good.
Signed-off-by: Dave Airlie <airlied@redhat.com>
In some circumstances the RC6 context can get corrupted. We can detect
this and take the required action, that is disable RC6 and runtime PM.
The HW recovers from the corrupted state after a system suspend/resume
cycle, so detect the recovery and re-enable RC6 and runtime PM.
v2: rebase (Mika)
v3:
- Move intel_suspend_gt_powersave() to the end of the GEM suspend
sequence.
- Add commit message.
v4:
- Rebased on intel_uncore_forcewake_put(i915->uncore, ...) API
change.
v5: rebased on gem/gt split (Mika)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
In BXT/APL, device 2 MMIO reads from MIPI controller requires its PLL
to be turned ON. When MIPI PLL is turned off (MIPI Display is not
active or connected), and someone (host or GT engine) tries to read
MIPI registers, it causes hard hang. This is a hardware restriction
or limitation.
Driver by itself doesn't read MIPI registers when MIPI display is off.
But any userspace application can submit unprivileged batch buffer for
execution. In that batch buffer there can be mmio reads. And these
reads are allowed even for unprivileged applications. If these
register reads are for MIPI DSI controller and MIPI display is not
active during that time, then the MMIO read operation causes system
hard hang and only way to recover is hard reboot. A genuine
process/application won't submit batch buffer like this and doesn't
cause any issue. But on a compromised system, a malign userspace
process/app can generate such batch buffer and can trigger system
hard hang (denial of service attack).
The fix is to lower the internal MMIO timeout value to an optimum
value of 950us as recommended by hardware team. If the timeout is
beyond 1ms (which will hit for any value we choose if MMIO READ on a
DSI specific register is performed without PLL ON), it causes the
system hang. But if the timeout value is lower than it will be below
the threshold (even if timeout happens) and system will not get into
a hung state. This will avoid a system hang without losing any
programming or GT interrupts, taking the worst case of lowest CDCLK
frequency and early DC5 abort into account.
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
