This allows udev to trigger rules when a parent device is registered
or unregistered from mdev.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Currently, the last stage boot loaders such as U-Boot can accept only
uImage which is an unnecessary additional step in automating boot
process.
Add an image header that boot loader understands and boot Linux from
flat Image directly.
This header is based on ARM64 boot image header and provides an
opportunity to combine both ARM64 & RISC-V image headers in future.
Also make sure that PE/COFF header can co-exist in the same image so
that EFI stub can be supported for RISC-V in future. EFI specification
needs PE/COFF image header in the beginning of the kernel image in order
to load it as an EFI application. In order to support EFI stub, code0
should be replaced with "MZ" magic string and res4(at offset 0x3c)
should point to the rest of the PE/COFF header (which will be added
during EFI support).
Tested on both QEMU and HiFive Unleashed using OpenSBI + U-Boot + Linux.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Karsten Merker <merker@debian.org>
Tested-by: Karsten Merker <merker@debian.org> (QEMU+OpenSBI+U-Boot)
Tested-by: Kevin Hilman <khilman@baylibre.com> (OpenSBI + U-Boot + Linux)
[paul.walmsley@sifive.com: fixed whitespace in boot-image-header.txt;
converted structure comment to kernel-doc format and added some detail]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Fix timeout recover function to return a meaningful return value.
When an interrupt was not sent by the FW, return IO error instead of
'true'.
Fixes: c7981bea48 ("net/mlx5e: Fix return status of TX reporter timeout recover")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
CQE checksum full mode in new HW, provides a full checksum of rx frame.
Covering bytes starting from eth protocol up to last byte in the received
frame (frame_size - ETH_HLEN), as expected by the stack.
Fixing up skb->csum by the driver is not required in such case. This fix
is to avoid wrong checksum calculation in drivers which already support
the new hardware with the new checksum mode.
Fixes: 85327a9c41 ("net/mlx5: Update the list of the PCI supported devices")
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
GRE entropy calculation is a single bit per card, and not per port.
Force disable GRE entropy calculation upon the first GRE encap rule,
and release the force at the last GRE encap rule removal. This is done
per port.
Fixes: 97417f6182 ("net/mlx5e: Fix GRE key by controlling port tunnel entropy calculation")
Signed-off-by: Eli Britstein <elibr@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Encap mode is related to switchdev mode only. Move the init of
the encap mode to eswitch_offloads. Before this change, we reported
that eswitch supports encap, even tough the device was in non
SRIOV mode.
Fixes: 7768d1971d ('net/mlx5: E-Switch, Add control for encapsulation')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
When current task is interrupted in-between stack frame allocation
and backchain write instructions new stack frame backchain pointer
is left uninitialized. That invalid backchain value is passed into
outside_of_stack for sanity check. Make sure int overflow does not happen
by subtracting stack_frame size from the stack "end" rather than adding
it to "random" backchain value.
Fixes: 41b0474c1b1c ("s390/unwind: introduce stack unwind API")
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The function ap_query_configuration is declared static and marked
EXPORT_SYMBOL, which is at best an odd combination. Because the
function is not used outside of the drivers/s390/crypto/ap_bus.c
file it is defined in, this commit removes the EXPORT_SYMBOL() marking.
Link: http://lkml.kernel.org/r/20190709122507.11158-1-efremov@linux.com
Fixes: f1b0a4343c ("s390/zcrypt: Integrate ap_asm.h into include/asm/ap.h.")
Fixes: 050349b5b7 ("s390/zcrypt: externalize AP config info query")
Signed-off-by: Denis Efremov <efremov@linux.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Provide an attribute to query the usage of mio instructions.
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Move enablement of mio addressing control from detect_machine_facilities
to pci_base_init. detect_machine_facilities runs so early that the
static branches have not been toggled yet, thus mio addressing control
was always off. In pci_base_init we have to use the SMP aware
ctl_set_bit though.
Fixes: 833b441ec0 ("s390: enable processes for mio instructions")
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Use the correct bit for detection of the machine capability associated
with the has_secure attribute. It is expected that the underlying
platform (including hypervisors) unsets the bit when they don't provide
secure ipl for their guests.
Fixes: c9896acc78 ("s390/ipl: Provide has_secure sysfs attribute")
Cc: stable@vger.kernel.org # 5.2
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
vfio_ap_free_aqic_resources is called in two places:
- during registration to have a "known state"
- during interrupt disable
We must not clear q->matrix_mdev in the registration phase as this will
mess up the reference counting and can lead to some warning and other
bugs.
Fixes: ec89b55e3b ("s390: ap: implement PAPQ AQIC interception in kernel")
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Add the extended counter set definitions for s390 machine types
8561 and 8262. They are identical with machine types 3906 and
3907.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The storage server issues three different types of out-of-space messages
whenever the Extent Pool or Extent Repository space runs short. When a
configured warning watermark is reached, the physical space is
completeley exhausted, or the capacity constraints have been relieved, a
message is received.
A log entry for the sysadmin to react to is generated in any case. In
case the physical space is completely exhausted, sense data that reads
"no space left on device" is received. In this case, currently running
I/O will be blocked until space has either been released or added to the
extent pool, and a relieve message was received via an attention
interrupt.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
ESE (Extent Space Efficient) volumes are thin-provisioned and therefore
space is only occupied with real data. In order to make previously used
space available for re-allocation again, discard support is enabled for
ESE volumes allowing the DASD driver to release said space.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
There is now an ALIGN_DOWN macro available. Let's rather use kernel
provided macros that do the things we want.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
ECKD, FBA, and the DIAG discipline use slightly different block layer
settings. In preparation of even more diverse queue settings, make
dasd_setup_queue() a discipline function.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Userspace tools might have the need to release space for Extent Space
Efficient (ESE) volumes when working with such a device.
Provide the necessarry interface for such a task by implementing a new
ioctl BIODASDRAS. The ioctl uses the format_data_t data structure for
data input:
typedef struct format_data_t {
unsigned int start_unit; /* from track */
unsigned int stop_unit; /* to track */
unsigned int blksize; /* sectorsize */
unsigned int intensity;
} format_data_t;
If the intensity is set to 0x40, start_unit and stop_unit are ignored
and space for the entire volume is released. Otherwise, if intensity is
set to 0, the respective range is released (if possible).
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
There is dasd_sleep_on() and dasd_sleep_on_interruptible() to start CCW
requests uninterruptible and interruptible. However, there is only
dasd_sleep_on_queue() to start requests from CCW queues uninterruptible.
Add dasd_sleep_on_queue_interruptible() to provide a way to start
requests from CCW queues interruptible. _dasd_sleep_on_queue() already
provides this functionality.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The definition for the bit that removes the write permission for record
zero when formatting was missing. Add it to complete the list.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
A dynamic formatting is issued whenever a write request returns with
either a No Record Found error (Command Mode), Incorrect Length error
(Transport Mode), or File Protected error (Transport Mode). All three
cases mean that the tracks in question haven't been initialized in a
desired format yet.
The part of the volume that was tried to be written on is then formatted
and the original request is re-queued.
As the formatting will happen during normal I/O operations, it is quite
likely that there won't be any memory available to build the respective
request. Another two pages of memory are allocated per volume
specifically for the dynamic formatting.
The dasd_eckd_build_format() function is extended to make sure that the
original startdev is reused. Also, all formatting and format check
functions use the new memory pool exclusively now to reduce complexity.
Read operations will always return zero data when unformatted areas are
read.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
In order to work with Extent Space Efficient (ESE) volumes, certain
viable information about those volumes and the corresponding extent
pool (such as extent size, configured space, allocated space, etc.) can
be provided.
Use the CCW commands Volume Storage Query and Logical Configuration
Query to receive detailed information about ESE volumes and the extent
pool respectively. These information are made accessible via internal
functions for subsequent users, and via sysfs attributes for userpsace
usage.
The new sysfs attributes reside in separate directories called capacity
and extent_pool.
attributes:
ese:
0/1 depending on whether the volume is an ESE volume
Capacity related attributes:
space_allocated:
Space currently allocated by the volume (in cyl)
space_configured:
Remaining space in the extent pool (in cyl)
logical_capacity:
The entire addressable space for this volume (in cyl)
Extent Pool related attributes:
pool_id:
ID of the extent pool the volume in question resides in
pool_oos:
Extent pool is out-of-space
extent_size:
Size of a single extent in this pool
cap_at_warnlevel
Extent pool capacity at warn level
warn_threshold:
Threshold at which percentage of remaining extent pool space a
warning message is issued
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
There are orders and sub-orders. Put them in different sections for a
better overview.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The disk layout and volume information of a DASD reside in the first two
tracks of cylinder 0. When a DASD is set online, currently the first
three tracks are read and analysed to confirm an expected layout.
For CDL (Compatible Disk Layout) only count area data of the first track
is evaluated and checked against expected key and data lengths. For LDL
(Linux Disk Layout) the first and third track is evaluated. However,
an LDL formatted volume is expected to be in the same format across all
tracks. Checking the third track therefore doesn't have any more value
than checking any other track at random.
Now, an Extent Space Efficient (ESE) DASD is initialised by only
formatting the first two tracks, as those tracks always contain all
information necessarry.
Checking the third track on an ESE volume will therefore most likely
fail with a record not found error, as the third track will be empty.
This in turn leads to the device being recognised with a volume size of
0. Attempts to write volume information on the first two tracks then
fail with "no space left on device" errors.
Initialising the first three tracks for an ESE volume is not a viable
solution, because the third track is already a regular track and could
contain user data. With that there is potential for data corruption.
Instead, always only analyse the first two tracks, as it is sufficiant
for both CDL and LDL, and allow ESE volumes to be recognised as well.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Commit 4d284cac76 ("[S390] Avoid excessive inlining.") removed
bytes_per_record() which was the only user of the defines ECKD_C0 and
ECKD_F*, and round_up_multiple(). Let's get rid of those.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
There are structs that have never been used. There are also two function
prototypes which were forgotton in commit f9f8d02fae ("[S390] dasd:
revert LCU optimization").
Clean up and keep the header file tidy.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Pull ACPI fix from Rafael Wysocki:
"Revert a recent ACPICA commit causing systems to hang at boot time"
* tag 'acpi-5.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPICA: Update table load object initialization"
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where
we are expecting to fall through.
This patch fixes the following warnings:
drivers/infiniband/sw/siw/siw_qp_rx.c: In function ‘siw_rdmap_complete’:
drivers/infiniband/sw/siw/siw_qp_rx.c:1214:18: warning: this statement may fall through [-Wimplicit-fallthrough=]
wqe->rqe.flags |= SIW_WQE_SOLICITED;
~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~
drivers/infiniband/sw/siw/siw_qp_rx.c:1215:2: note: here
case RDMAP_SEND:
^~~~
drivers/infiniband/sw/siw/siw_qp_tx.c: In function ‘siw_qp_sq_process’:
drivers/infiniband/sw/siw/siw_qp_tx.c:1044:4: warning: this statement may fall through [-Wimplicit-fallthrough=]
siw_wqe_put_mem(wqe, tx_type);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/infiniband/sw/siw/siw_qp_tx.c:1045:3: note: here
case SIW_OP_INVAL_STAG:
^~~~
drivers/infiniband/sw/siw/siw_qp_tx.c:1128:4: warning: this statement may fall through [-Wimplicit-fallthrough=]
siw_wqe_put_mem(wqe, tx_type);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/infiniband/sw/siw/siw_qp_tx.c:1129:3: note: here
case SIW_OP_INVAL_STAG:
^~~~
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Pull networking updates from David Miller:
"Some highlights from this development cycle:
1) Big refactoring of ipv6 route and neigh handling to support
nexthop objects configurable as units from userspace. From David
Ahern.
2) Convert explored_states in BPF verifier into a hash table,
significantly decreased state held for programs with bpf2bpf
calls, from Alexei Starovoitov.
3) Implement bpf_send_signal() helper, from Yonghong Song.
4) Various classifier enhancements to mvpp2 driver, from Maxime
Chevallier.
5) Add aRFS support to hns3 driver, from Jian Shen.
6) Fix use after free in inet frags by allocating fqdirs dynamically
and reworking how rhashtable dismantle occurs, from Eric Dumazet.
7) Add act_ctinfo packet classifier action, from Kevin
Darbyshire-Bryant.
8) Add TFO key backup infrastructure, from Jason Baron.
9) Remove several old and unused ISDN drivers, from Arnd Bergmann.
10) Add devlink notifications for flash update status to mlxsw driver,
from Jiri Pirko.
11) Lots of kTLS offload infrastructure fixes, from Jakub Kicinski.
12) Add support for mv88e6250 DSA chips, from Rasmus Villemoes.
13) Various enhancements to ipv6 flow label handling, from Eric
Dumazet and Willem de Bruijn.
14) Support TLS offload in nfp driver, from Jakub Kicinski, Dirk van
der Merwe, and others.
15) Various improvements to axienet driver including converting it to
phylink, from Robert Hancock.
16) Add PTP support to sja1105 DSA driver, from Vladimir Oltean.
17) Add mqprio qdisc offload support to dpaa2-eth, from Ioana
Radulescu.
18) Add devlink health reporting to mlx5, from Moshe Shemesh.
19) Convert stmmac over to phylink, from Jose Abreu.
20) Add PTP PHC (Physical Hardware Clock) support to mlxsw, from
Shalom Toledo.
21) Add nftables SYNPROXY support, from Fernando Fernandez Mancera.
22) Convert tcp_fastopen over to use SipHash, from Ard Biesheuvel.
23) Track spill/fill of constants in BPF verifier, from Alexei
Starovoitov.
24) Support bounded loops in BPF, from Alexei Starovoitov.
25) Various page_pool API fixes and improvements, from Jesper Dangaard
Brouer.
26) Just like ipv4, support ref-countless ipv6 route handling. From
Wei Wang.
27) Support VLAN offloading in aquantia driver, from Igor Russkikh.
28) Add AF_XDP zero-copy support to mlx5, from Maxim Mikityanskiy.
29) Add flower GRE encap/decap support to nfp driver, from Pieter
Jansen van Vuuren.
30) Protect against stack overflow when using act_mirred, from John
Hurley.
31) Allow devmap map lookups from eBPF, from Toke Høiland-Jørgensen.
32) Use page_pool API in netsec driver, Ilias Apalodimas.
33) Add Google gve network driver, from Catherine Sullivan.
34) More indirect call avoidance, from Paolo Abeni.
35) Add kTLS TX HW offload support to mlx5, from Tariq Toukan.
36) Add XDP_REDIRECT support to bnxt_en, from Andy Gospodarek.
37) Add MPLS manipulation actions to TC, from John Hurley.
38) Add sending a packet to connection tracking from TC actions, and
then allow flower classifier matching on conntrack state. From
Paul Blakey.
39) Netfilter hw offload support, from Pablo Neira Ayuso"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2080 commits)
net/mlx5e: Return in default case statement in tx_post_resync_params
mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync().
net: dsa: add support for BRIDGE_MROUTER attribute
pkt_sched: Include const.h
net: netsec: remove static declaration for netsec_set_tx_de()
net: netsec: remove superfluous if statement
netfilter: nf_tables: add hardware offload support
net: flow_offload: rename tc_cls_flower_offload to flow_cls_offload
net: flow_offload: add flow_block_cb_is_busy() and use it
net: sched: remove tcf block API
drivers: net: use flow block API
net: sched: use flow block API
net: flow_offload: add flow_block_cb_{priv, incref, decref}()
net: flow_offload: add list handling functions
net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free()
net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_*
net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND
net: flow_offload: add flow_block_cb_setup_simple()
net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC
net: hisilicon: Add an rx_desc to adapt HI13X1_GMAC
...
Pull clone3 system call from Christian Brauner:
"This adds the clone3 syscall which is an extensible successor to clone
after we snagged the last flag with CLONE_PIDFD during the 5.2 merge
window for clone(). It cleanly supports all of the flags from clone()
and thus all legacy workloads.
There are few user visible differences between clone3 and clone.
First, CLONE_DETACHED will cause EINVAL with clone3 so we can reuse
this flag. Second, the CSIGNAL flag is deprecated and will cause
EINVAL to be reported. It is superseeded by a dedicated "exit_signal"
argument in struct clone_args thus freeing up even more flags. And
third, clone3 gives CLONE_PIDFD a dedicated return argument in struct
clone_args instead of abusing CLONE_PARENT_SETTID's parent_tidptr
argument.
The clone3 uapi is designed to be easy to handle on 32- and 64 bit:
/* uapi */
struct clone_args {
__aligned_u64 flags;
__aligned_u64 pidfd;
__aligned_u64 child_tid;
__aligned_u64 parent_tid;
__aligned_u64 exit_signal;
__aligned_u64 stack;
__aligned_u64 stack_size;
__aligned_u64 tls;
};
and a separate kernel struct is used that uses proper kernel typing:
/* kernel internal */
struct kernel_clone_args {
u64 flags;
int __user *pidfd;
int __user *child_tid;
int __user *parent_tid;
int exit_signal;
unsigned long stack;
unsigned long stack_size;
unsigned long tls;
};
The system call comes with a size argument which enables the kernel to
detect what version of clone_args userspace is passing in. clone3
validates that any additional bytes a given kernel does not know about
are set to zero and that the size never exceeds a page.
A nice feature is that this patchset allowed us to cleanup and
simplify various core kernel codepaths in kernel/fork.c by making the
internal _do_fork() function take struct kernel_clone_args even for
legacy clone().
This patch also unblocks the time namespace patchset which wants to
introduce a new CLONE_TIMENS flag.
Note, that clone3 has only been wired up for x86{_32,64}, arm{64}, and
xtensa. These were the architectures that did not require special
massaging.
Other architectures treat fork-like system calls individually and
after some back and forth neither Arnd nor I felt confident that we
dared to add clone3 unconditionally to all architectures. We agreed to
leave this up to individual architecture maintainers. This is why
there's an additional patch that introduces __ARCH_WANT_SYS_CLONE3
which any architecture can set once it has implemented support for
clone3. The patch also adds a cond_syscall(clone3) for architectures
such as nios2 or h8300 that generate their syscall table by simply
including asm-generic/unistd.h. The hope is to get rid of
__ARCH_WANT_SYS_CLONE3 and cond_syscall() rather soon"
* tag 'clone3-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
arch: handle arches who do not yet define clone3
arch: wire-up clone3() syscall
fork: add clone3
The variable buffer_index is being initialized however this is never
read and later it is being reassigned to a new value. The initialization
is redundant and hence can be removed.
Addresses-Coverity: ("Unused Value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Many NVIDIA GPUs can be configured as either a single-function video device
or a multi-function device with video at function 0 and an HDA audio
controller at function 1. The HDA controller can be enabled or disabled by
a bit in the function 0 config space.
Some BIOSes leave the HDA disabled, which means the HDMI connector from the
NVIDIA GPU may not work. Sometimes the BIOS enables the HDA if an HDMI
cable is connected at boot time, but that doesn't handle hotplug cases.
Enable the HDA controller on device enumeration and resume and re-read the
header type, which tells us whether the GPU is a multi-function device.
This quirk is limited to NVIDIA PCI devices with the VGA Controller device
class. This is expected to correspond to product configurations where the
NVIDIA GPU has connectors attached. Other products where the device class
is 3D Controller are expected to correspond to configurations where the
NVIDIA GPU is dedicated (dGPU) and has no connectors. See original post
(URL below) for more details.
This commit takes inspiration from an earlier patch by Daniel Drake.
Link: https://lore.kernel.org/r/20190708051744.24039-1-drake@endlessm.com v2
Link: https://lore.kernel.org/r/20190613063514.15317-1-drake@endlessm.com v1
Link: https://devtalk.nvidia.com/default/topic/1024022
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75985
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Daniel Drake <drake@endlessm.com>
[bhelgaas: commit log, log message, return early if already enabled]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Aaron Plattner <aplattner@nvidia.com>
Cc: Peter Wu <peter@lekensteyn.nl>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Maik Freudenberg <hhfeuer@gmx.de>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David Teigland <teigland@redhat.com>
If the DLM lowcomms stack is shut down before any DLM
traffic can be generated, flush_workqueue() and
destroy_workqueue() can be called on empty send and/or recv
workqueues.
Insert guard conditionals to only call flush_workqueue()
and destroy_workqueue() on workqueues that are not NULL.
Signed-off-by: David Windsor <dwindsor@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Previously, if mbox_request_channel_byname was used with a name
which did not exist in the "mbox-names" property of a mailbox
client, the mailbox corresponding to the last entry in the
"mbox-names" list would be incorrectly selected.
With this patch, -EINVAL is returned if the named mailbox is
not found.
Signed-off-by: Morten Borup Petersen <morten_bp@live.dk>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
In commit 4a7b06c157a2 ("powerpc/eeh: Handle hugepages in ioremap
space") support for using hugepages in the vmalloc and ioremap areas was
enabled for radix. Unfortunately this broke EEH MMIO error checking.
Detection works by inserting a hook which checks the results of the
ioreadXX() set of functions. When a read returns a 0xFFs response we
need to check for an error which we do by mapping the (virtual) MMIO
address back to a physical address, then mapping physical address to a
PCI device via an interval tree.
When translating virt -> phys we currently assume the ioremap space is
only populated by PAGE_SIZE mappings. If a hugepage mapping is found we
emit a WARN_ON(), but otherwise handles the check as though a normal
page was found. In pathalogical cases such as copying a buffer
containing a lot of 0xFFs from BAR memory this can result in the system
not booting because it's too busy printing WARN_ON()s.
There's no real reason to assume huge pages can't be present and we're
prefectly capable of handling them, so do that.
Fixes: 4a7b06c157a2 ("powerpc/eeh: Handle hugepages in ioremap space")
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190710150517.27114-1-oohall@gmail.com
The commit below introduced a few compilation warnings.
In file included from ./include/rdma/ib_verbs.h:64,
from ./include/linux/mlx5/device.h:37,
from ./include/linux/mlx5/driver.h:51,
from drivers/net/ethernet/mellanox/mlx5/core/uar.c:36:
./include/linux/dim.h:378:1: warning: 'rdma_dim_prof' defined but not
used [-Wunused-const-variable=]
rdma_dim_prof[RDMA_DIM_PARAMS_NUM_PROFILES] = {
^~~~~~~~~~~~~
In file included from ./include/rdma/ib_verbs.h:64,
from ./include/linux/mlx5/device.h:37,
from ./include/linux/mlx5/driver.h:51,
from
drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c:37:
./include/linux/dim.h:378:1: warning: 'rdma_dim_prof' defined but not
used [-Wunused-const-variable=]
rdma_dim_prof[RDMA_DIM_PARAMS_NUM_PROFILES] = {
^~~~~~~~~~~~~
Since only ib_cq_rdma_dim_work() in drivers/infiniband/core/cq.c uses it,
just move the definition over there.
Fixes: f4915455dc ("linux/dim: Implement RDMA adaptive moderation (DIM)")
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/infiniband/sw/siw/siw_cm.c: In function siw_cm_llp_state_change:
drivers/infiniband/sw/siw/siw_cm.c:1278:17: warning: variable s set but not used [-Wunused-but-set-variable]
Fixes: 6c52fdc244 ("rdma/siw: connection management")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
If LIBCRC32C and DMA_VIRT_OPS are not enabled:
drivers/infiniband/sw/siw/siw_main.o: In function `siw_newlink':
siw_main.c:(.text+0x35c): undefined reference to `dma_virt_ops'
drivers/infiniband/sw/siw/siw_qp_rx.o: In function `siw_csum_update':
siw_qp_rx.c:(.text+0x16): undefined reference to `crc32c'
Fix the first issue by adding a select of DMA_VIRT_OPS. Fix the second
issue by replacing the unneeded dependency on CRYPTO_CRC32 by a dependency
on LIBCRC32C.
Reported-by: noreply@ellerman.id.au (first issue)
Fixes: c0cf5bdde4 ("rdma/siw: addition to kernel build environment")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
sym_is_choice(sym) has already been checked by previous if-block:
if (sym_is_choice(sym) || (sym->flags & SYMBOL_NO_WRITE))
continue;
Hence, the following code is redundant, and the comment is misleading:
if (!sym_is_choice(sym))
continue;
/* fall through */
It always takes 'continue', never falls though.
Clean up the dead code.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
arch/mips/Makefile passes prefixes that start with '-' to cc-cross-prefix
when $(tool-archpref) evaluates to the empty string.
They are filtered-out before the $(shell ...) invocation. Otherwise,
'command -v' would be confused.
$ command -v -linux-gcc
bash: command: -l: invalid option
command: usage: command [-pVv] command [arg ...]
Since commit 913ab9780f ("kbuild: use more portable 'command -v' for
cc-cross-prefix"), cc-cross-prefix throws away the stderr output, so
the console is not polluted in any way.
This is not a big deal in practice, but I see a slightly better taste
in adding '--' to teach it that '-linux-gcc' is an argument instead of
a command option.
This will cause extra forking of subshell, but it will not be noticeable
performance regression.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
ifa is protected by rcu or rtnl, add the missing locking. In this case we
have to use rtnl since siw_listen_address() is sleeping.
Fixes: 6c52fdc244 ("rdma/siw: connection management")
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Pull NVMe fixes from Christoph:
"Lof of fixes all over the place, and two very minor features that
were in the nvme tree by the end of the merge window, but hadn't made
it out to Jens yet."
* 'nvme-5.3' of git://git.infradead.org/nvme:
nvme: fix regression upon hot device removal and insertion
nvme-fc: fix module unloads while lports still pending
nvme-tcp: don't use sendpage for SLAB pages
nvme-tcp: set the STABLE_WRITES flag when data digests are enabled
nvmet: print a hint while rejecting NSID 0 or 0xffffffff
nvme-multipath: do not select namespaces which are about to be removed
nvme-multipath: also check for a disabled path if there is a single sibling
nvme-multipath: factor out a nvme_path_is_disabled helper
nvme: set physical block size and optimal I/O size
nvme: add I/O characteristics fields
nvmet: export I/O characteristics attributes in Identify
nvme-trace: add delete completion and submission queue to admin cmds tracer
nvme-trace: fix spelling mistake "spcecific" -> "specific"
nvme-pci: limit max_hw_sectors based on the DMA max mapping size
nvme-pci: check for NULL return from pci_alloc_p2pmem()
nvme-pci: don't create a read hctx mapping without read queues
nvme-pci: don't fall back to a 32-bit DMA mask
nvme-pci: make nvme_dev_pm_ops static
nvme-fcloop: resolve warnings on RCU usage and sleep warnings
nvme-fcloop: fix inconsistent lock state warnings
