Before:
We use drm_match_cea_mode() to get the vic for any mode we
want to set, most of the time vic will be different for the new mode.
DC uses memcmp to check if timing changed, in this case DC will
say timing changed and we endup doing a full modeset.
Current:
Now we check if !RMX_OFF and old_refresh == new_refresh if so
we copy the vic from old timing. In a case where we are currently on
a lower timing and want to change to higher mode, stream->dst will be
different and cause us to do a full modeset, which is what we want.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Path property is used for userspace to know what MST connector goes to what actual DRM DisplayPort connector, the tiling property is for tiling configurations. Not sure what else there is to figure out.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The change fixed huge delay in SST daisy chain and S3 soft hang
observed in 4.19 kernel rebase.
Regression point in drm:
drm/fb-helper: Eliminate the .best_encoder() usage
The aux sequence is altered due to the failure in
drm_connector_for_each_possible_encoder(). The failure is
caused by missing attached encoder in the process of adding
MST connector.
drm_dp_send_enum_path_resources() aux transaction is pushed after
mode probe, which causes conflict to drm_dp_mst_i2c_xfer(),
leading to the transaction timeout.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently there are several instances of pointer fs_params being
dereferenced before fs_params is being null checked. Fix this by
only dereferencing fs_params after the null check.
Detected by CoverityScan, CID#1475565 ("Dereference before null check")
Fixes: e1e8a020c6 ("drm/amd/display: Add support for Freesync 2 HDR and Content to Display Mapping")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Based SDMA fw version to enable has_page_queue support. Have to move
sdma_v4_0_init_microcode from sw_init to early_init, to load firmware
and init fw_version before set_ring/buffer/vm_pte_funcs use it.
v2: don't enable on vega12, 20 until confirmed
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Due to the register name and setting change of HDP
memory light sleep on Vega20,change accordingly in
the driver.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Because increase SDMA_DOORBELL_RANGE to add new SDMA doorbell for paging queue will
break SRIOV, instead we can reserve and map two doorbell pages for amdgpu, paging
queues doorbell index use same index as SDMA gfx queues index but on second page.
For Vega20, after we change doorbell layout to increase SDMA doorbell for 8 SDMA RLC
queues later, we could use new doorbell index for paging queue.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is to improve system limit by:
1. replacing userptrlimit with a total memory limit that
conunts TTM memory usage and userptr usage.
2. counting acc size for all BOs.
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This change prepares for adding SG BOs that will be used for mapping
doorbells into GPUVM address space.
This type of BO would be mistaken for an invalid userptr BO. Improve
that check to test that it's actually a userptr BO so that SG BOs that
are still in the CPU domain can be validated and mapped correctly.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The adev parameter in amdgpu_sync_fence and amdgpu_sync_resv is only
needed for updating sync->last_vm_update. This breaks if different
adevs are passed to calls for the same sync object.
Always pass NULL for calls from KFD because sync objects used for
KFD don't belong to any particular device, and KFD doesn't need the
sync->last_vm_update fence.
This fixes kernel log warnings on multi-GPU systems after recent
changes in amdgpu_amdkfd_gpuvm_restore_process_bos.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PD or PT might have to be moved during validation and this move has to be
completed before updating it. If page table updates are done using SDMA
then this serializing is done by SDMA command submission.
And if PD/PT updates are done by CPU, then explicit waiting for PD/PT
updates are done in amdgpu VM amdgpu_vm_wait_pd function.
Sync to PD BO moving fence to handle corner case where none of the PTs
are updated but PD is evicted.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reading the sysfs files pp_sclk_od and pp_mclk_od return the
percentage difference between the VBIOS-provided default
frequency and the current (possibly user-set) frequency in
the highest SCLK and MCLK DPM states, respectively.
Writing to these files provides an easy mechanism for
setting a higher-than-default maximum frequency. We
normally only allow values >= 0 to be written here.
However, with the addition of pp_od_clk_voltage, we now
allow users to set custom DPM tables. If they then set
the maximum DPM state to something less than the default,
later reads of pp_*_od should return a negative value.
The highest DPM state is now less than the VBIOS-provided
default, so the percentage is negative.
The math to calculate this was originally performed with
unsigned values, meaning reads that should return negative
values returned meaningless data. This patch corrects that
issue and normalizes how all of the calculations are done
across the various hwmgr types.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With GFXOFF enabled, this patch will cause PCO amdgpu_test failed,
but GFXOFF is necessary for PCO, so revert the patch.
This reverts commit b83761bb0b.
v2: add a comment for future reference (Alex)
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jack Gui <Jack.Gui@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Running kfdtest on an AMD Carizzo flooded the kernel log
with thousands of these "was not implemented" messages,
making it impossible to see other messages there.
Ratelimit the messages to prevent user-space from flooding
the kernel log.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Many panels support more than 8bpc but some modes are unavailable while
running at greater than 8bpc due to DP/HDMI bandwidth constraints.
Support for more than 8bpc was added recently in the driver but it
defaults to the maximum supported bpc - locking out these modes.
This should be a user configurable option such that the user can select
what bpc configuration they would like.
[How]
This patch adds support for getting and setting the amdgpu driver
specific "max bpc" property on the connector.
It also adds support for limiting the output bpc based on the property
value. The default limitation is the lowest value in the range, 8bpc.
This was the old value before the range was uncapped.
This patch should be updated/replaced later once common drm support
for max bpc lands.
Bugzilla: https://bugs.freedesktop.org/108542
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201585
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200645
Fixes: e03fd3f300 ("drm/amd/display: Do not limit color depth to 8bpc")
v2: rebase on upstream (Alex)
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Many panels support more than 8bpc but some modes are unavailable while
running at greater than 8bpc due to DP/HDMI bandwidth constraints.
Support for more than 8bpc was added recently in the driver but it
defaults to the maximum supported bpc - locking out these modes.
This should be a user configurable option such that the user can select
what bpc configuration they would like.
[How]
This patch introduces the "max bpc" amdgpu driver specific connector
property so the user can limit the maximum bpc. It ranges from 8 to 16.
This doesn't directly set the preferred bpc for the panel since it
follows Intel's existing driver conventions.
This proprety should be removed once common drm support for max bpc
lands.
v2: rebase on upstream (Alex)
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/amd/amdgpu/psp_v10_0.c: In function 'psp_v10_0_ring_stop':
drivers/gpu/drm/amd/amdgpu/psp_v10_0.c:230:19: warning:
variable 'ring' set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/amd/amdgpu/psp_v3_1.c: In function 'psp_v3_1_ring_stop':
drivers/gpu/drm/amd/amdgpu/psp_v3_1.c:359:19: warning:
variable ‘ring’ set but not used [-Wunused-but-set-variable]
It not used since commit
4ef7245331 ("drm/amdgpu: added api for stopping psp ring (v2)")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aligned the amd_sriov_msg_pf2vf_info_header and amd_sriov_msg_pf2vf_info_header's
definition with libgv.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Frank.Min <Frank.Min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
dc_link_set_backlight_level can be called from a context
where the stream is unknown. In this case, we can still
find which controller is driving this particular backlight
[How]
Compare links for equality instead of streams
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A number of registers need to be updated for all active
pipes wherever any pipe causes a change in watermarks.
This change separates programming of these registers into
a separate function call that is called for all active pipes
during a bw update.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We observed an issue where a display would not accept programming of
the ignore_MSA_timing_param bit if the stream was blanked.
[How]
move enable_stream_features from enable_link_dp to
core_link_enable_stream, after unblank_stream
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For some complicated blending transition cases, the head
pipe of the second stream may end up being a higher pipe
index than the free pipe. In those cases dc_add_plane_to_context
will incorrectly set the tail_pipe to the free pipe, which
will cause the top_pipe and bottom_pipe to be the same
[How]
Move the call to resource_get_tail_pipe_for_stream() to be
before call to acquire_free_pipe_for_stream().
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DPCD Extended Receiver Capability Field
[Why]
1.dpcd extended receiver capability sometimes read fail,
and corrupted data leads to sink caps is not correct.
2.sometimes sink reply ack with fewer data
[How]
check the return value of core_link_read_dpcd,
try to read again when failure happens
Signed-off-by: Xiaodong Yan <Xiaodong.Yan@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Change the math to work in viewport rotation when calculating
viewport and viewport adjustment. This simplifies the math
for viewport calculation and makes viewport adjustment easier to
understand.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Underflow is asserted due to some timing condition which does not
actually result in visible underflow (i.e. it occurs while blanked).
[how]
Force clear underflow occured bit whenver we unblank.
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
The condition to check for two pixels per containter has become rather
long and is used in number of places.
[how]
Move the check to a helper function.
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
phy_pix_clk is one of the variable used to check if one PLL can be shared
with displays having common mode set configuration. As of now
phy_pix_clock varialbe is calculated in function dc_validate_stream().
dc_validate_stream() function is called after clocks are assigned for the
new display. Due to this during hotplug, when PLL sharing conditions are
checked for new display phy_pix_clk variable will be 0 and for displays
that are already enabled phy_pix_clk will have some value. Hence PLL will
not be shared and if the display hardware doesn't have any more PLL to
assign, mode set will fail due to resource unavailability.
[how]
Instead of only calculating the phy_pix_clk variable after the PLL is
assigned for new display, this patch calculates phy_pix_clk also during
the before assigning the PLL for new display.
Signed-off-by: Yogesh Mohan Marimuthu <yogesh.mohanmarimuthu@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DMCU firmware is not required - the system is expected to run
fine without it. Therefore, wherever dmcu functions could be
called, dmcu initialization shoudl be checked
[How]
Use the helpful hook dmcu_funcs->is_dmcu_initialized
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
