drm-misc-next for 5.1:
UAPI Changes:
- Addition of the Allwinner tiled format modifier
Cross-subsystem Changes:
Core Changes:
- dma-buf documentation improvements
- Removal of now unused fbdev helpers
- Addition of new drm fbdev helpers
- Improvements to tinydrm
- Addition of new drm_fourcc helpers
- Impromevents to i2c-over-aux to handle I2C_M_STOP
Driver Changes:
- Add support for the TI DS90C185 LVDS bridge
- Improvements to the thc63lvdm83d bridge
- Improvements to sun4i YUV and scaler support
- Fix to the powerdown sequence of panel-innolux
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190123110317.h4tovujaydo2bfz2@flea
- Unwind failure on pinning the gen7 PPGTT (Chris)
- Fastset updates to make sure DRRS and PSR are properly enabled (Hans)
- Header include clean-up (Brajeswar, Jani)
- Improvements and clean-up on debugfs (Chris, Jani)
- Avoid division by zero on CNL clocks setup (Xiao)
- Restrict PSMI context load w/a to Haswell GT1 (Chris)
- Remove HW semaphores for gen7 inter-engine sync (Chris)
- Pull the render flush into breadcrumb emission (Chris)
- i915_params copy and free helpers and other reorgs and docs (Jani)
- Remove has_pooled_eu static initializer (Tvrtko)
- Updates on kerneldoc (Chris)
- Remove redundant trailing request flush (Chris)
- ringbuffer irq seqno fixes and clean-up (Chris)
- splitting off runtime device info and other clean-up around (Jani)
- Selftests improvements (Chris, Daniele)
- Flush RING_IMR changes before changing the global GT IMR on gen6 and HSW (Chris)
- Some improvements and fixes around GPU reset and GPU hang report (Chris)
- Remove partial attempt to swizzle on pread/pwrite (Chris)
- Return immediately if trylock fails for direct-reclaim (Chris)
- Downgrade scare message for unknown HuC firmware (Jani)
- ACPI / PMIC for MIPI / DSI (Hans)
- Reduce i915_request_alloc retirement to local context (Chris)
- Init per-engine WAs for all engines (Daniele)
- drop DPF code for gen8+ (Daniele)
- Guard error capture against unpinned vma (Chris)
- Use mutex_lock_killable from inside the shrinker (Chris)
- Removing pooling from struct_mutex from vmap shrinker (Chris)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Fri 11 Jan 2019 09:58:18 AEST
# gpg: using RSA key FA625F640EEB13CA
# gpg: Good signature from "Rodrigo Vivi <rodrigo.vivi@intel.com>"
# gpg: aka "Rodrigo Vivi <rodrigo.vivi@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6D20 7068 EEDD 6509 1C2C E2A3 FA62 5F64 0EEB 13CA
# Conflicts:
# drivers/gpu/drm/i915/intel_dp.c
# drivers/gpu/drm/i915/intel_drv.h
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114183820.GA2855@intel.com
With new platforms not having LVDS support, only call intel_lvds_init()
on platforms that might actually have LVDS. Move the comment about eDP
init to the PCH block where it's relevant.
This puts intel_lvds_init() more in line with the rest of the outputs,
and makes it slightly easier for the uninitiated to figure out which
platforms actually have what.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190122082307.4003-2-jani.nikula@intel.com
With new platforms not having CRT support and most conditions in
intel_crt_present() being specific to DDI, split out the CRT
initialization to platform specific blocks in the if ladder. Add new
Pineview block for this.
This puts intel_crt_init() more in line with the rest of the outputs,
and makes it slightly easier for the uninitiated to figure out which
platforms actually have what.
v2: keep gen >= 9 check in intel_ddi_crt_present() (Ville)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190122082307.4003-1-jani.nikula@intel.com
We currently program userspace-provided gamma and degamma LUT's into our
hardware without really checking to see whether they satisfy our
hardware's rules. We should try to catch tables that are invalid for
our hardware early and reject the atomic transaction.
All of our platforms that accept a degamma LUT expect that the entries
in the LUT are always flat or increasing, never decreasing. Also, our
GLK and ICL platforms only accept degamma tables with r=g=b entries; so
we should also add the relevant checks for that in anticipation of
degamma support landing for those platforms.
v2:
- Use new API (single check function with bitmask of tests to apply)
- Call helper for our gamma table as well (with no additional tests
specified) so that the table size will be validated.
v3:
- Don't call on the gamma table since the LUT size is already tested at
property blob upload and we don't have any additional hardware
constraints for that LUT.
v4:
- Apply equal color channel check on gen10 as well; the bspec has some
strange tagging for CNL platforms, but this appears to apply there as
well. (Ville)
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Swati Sharma <swati2.sharma@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181218175158.5739-1-matthew.d.roper@intel.com
Some hardware may place additional restrictions on the gamma/degamma
curves described by our LUT properties. E.g., that a gamma curve never
decreases or that the red/green/blue channels of a LUT's entries must be
equal. Let's add a helper function that drivers can use to test that a
userspace-provided LUT is valid and doesn't violate hardware
requirements.
v2:
- Combine into a single helper that just takes a bitmask of the tests
to apply. (Brian Starkey)
- Add additional check (always performed) that LUT property blob size
is always a multiple of the LUT entry size. (stolen from ARM driver)
v3:
- Drop the LUT size check again since
drm_atomic_replace_property_blob_from_id() already covers this for
us. (Alexandru Gheorghe)
v4:
- Use an enum to describe possible test values rather than #define's;
this is cleaner to provide kerneldoc for. (Daniel Vetter)
- s/DRM_COLOR_LUT_INCREASING/DRM_COLOR_LUT_NON_DECREASING/. (Ville)
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Swati Sharma <swati2.sharma@intel.com>
Cc: Brian Starkey <Brian.Starkey@arm.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Reviewed-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181217224415.12848-1-matthew.d.roper@intel.com
When reading GEN11_GT_INTR_DWx closely after enabling the interrupts
in gen11_irq_postinstall, the returned value is garbage. This can
cause other parts of the setup code (e.g. gen11_reset_one_iir) to
think that there are interrupts to be cleared when there are none.
The garbage value is only seen on the first read done after the enable,
so this looks like a posting issue. Adding a posting read after enabling
the interrupts does indeed fix the problem.
Note that the posting read has been purposely added outside of
gen11_master_intr_enable since the issue has only been observed when the
full interrupt setup is performed.
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190123023227.8117-1-daniele.ceraolospurio@intel.com
On a NOP double buffer update where current buffer address is the same
as the next buffer address, the SDW_UPDATE bit clears too late. As we
are now using this bit to determine when it is safe to signal flip
completion to userspace this will delay completion of atomic commits
where one plane doesn't change the buffer by a whole frame period.
Fix this by remembering the last buffer address and just skip the
double buffer update if it would not change the buffer address.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
[p.zabel@pengutronix.de: initialize last_bufaddr in ipu_pre_configure]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
GVT-g will shadow the privilege batch buffer and the indirect context
during command scan, move the release process into
intel_vgpu_destroy_workload() to ensure the resources are recycled
properly.
Fixes: 0cce2823ed ("drm/i915/gvt/kvmgt:Refine error handling for prepare_execlist_workload")
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
The old debugfs fields was not following a naming partern and it was
a bit confusing.
So it went from:
~$ sudo more /sys/kernel/debug/dri/0/i915_edp_psr_status
Sink_Support: yes
PSR mode: PSR1
Enabled: yes
Busy frontbuffer bits: 0x000
Main link in standby mode: no
HW Enabled & Active bit: yes
Source PSR status: 0x24050006 [SRDONACK]
To:
~$ sudo more /sys/kernel/debug/dri/0/i915_edp_psr_status
Sink support: yes [0x03]
PSR mode: PSR1 enabled
Source PSR ctl: enabled [0x81f00e26]
Source PSR status: IDLE [0x04010006]
Busy frontbuffer bits: 0x00000000
The 'Main link in standby mode' was removed as it is not useful but
if needed by someone the information is still in the register value
of 'Source PSR ctl' inside of the brackets, PSR mode and Enabled was
squashed into PSR mode, some renames and reorders and we have this
cleaner version. This will also make easy to parse debugfs for IGT
tests.
v2: Printing sink PSR version with only 2 hex digits as it is a byte
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Suggested-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190117205548.28378-2-jose.souza@intel.com
Move mipi_dsi_dcs_set_display_off() from innolux_panel_disable()
to innolux_panel_unprepare(), so they are consistent with
innolux_panel_enable() and innolux_panel_prepare().
This also fixes some mode check and irq timeout issue in MTK dsi code.
Since some dsi code (e.g. mtk_dsi) have following call trace:
1. drm_panel_disable(), which calls innolux_panel_disable()
2. switch to cmd mode
3. drm_panel_unprepare(), which calls innolux_panel_unprepare()
However, mtk_dsi needs to be in cmd mode to be able to send commands
(e.g. mipi_dsi_dcs_set_display_off() and mipi_dsi_dcs_enter_sleep_mode()),
so we need these functions to be called after the switch to cmd mode happens,
i.e. in innolux_panel_unprepare.
Signed-off-by: Hsin-Yi, Wang <hsinyi@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190109065922.231753-1-hsinyi@chromium.org
Before adding yet another copy of struct live_test and its handler,
refactor the existing code into a common framework for live selftests.
For many live selftests, we want to know if the GPU hung or otherwise
misbehaved during the execution of the test (beyond any infraction in
the behaviour under test), live_test provides this by comparing the
GPU state before and after, alerting if it unexpectedly changed (e.g.
the reset counter changed). It also ensures that the GPU is idle before
and after the test, so that residual code running on the GPU is flushed
before testing.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190121222117.23305-5-chris@chris-wilson.co.uk
Some tests (e.g. igt_vma_pin1) presume that we have a completely clean
GGTT so that it can probe boundaries without fear that something is
already allocated there. However, the mock device is starting to get
complicated and following similar rules to the live device, i.e. we
can't guarantee that i915->ggtt remains clean, so create a temporary
address_space equivalent to the mock ggtt for the purpose.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190121222117.23305-7-chris@chris-wilson.co.uk
Although TMDS clock is required for HDMI to properly function,
nobody called clk_prepare_enable(). This fixes reference counting
issues and makes sure clock is running when it needs to be running.
Due to TDMS clock being parent clock for DDC clock, TDMS clock
was turned on/off for each EDID probe, causing spurious failures
for certain HDMI/DVI screens.
Fixes: 9c5681011a ("drm/sun4i: Add HDMI support")
Signed-off-by: Priit Laes <priit.laes@paf.com>
[Maxime: Moved the TMDS clock enable earlier]
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190122073232.7240-1-plaes@plaes.org
There are 3 problems with the dsi code's pipe_bpp handling for 6 bpc
pixel-formats which this commit addresses:
1) It assumes that the pipe_bpp is the same as the bpp going over the dsi
lanes. This assumption is not valid for MIPI_DSI_FMT_RGB666, where pipe_bpp
should be 18 so that we do proper dithering but we actually send 24 bpp
over the dsi lanes (MIPI_DSI_FMT_RGB666_PACKED sends 18 bpp).
This assumption is enforced by an assert in *_dsi_get_pclk(). This assert
triggers on the initial hw-state readback on BYT/CHT devices which use
MIPI_DSI_FMT_RGB666, such as the Prowise PT301 tablet. PIPECONF is set to
6BPC / 18 bpp by the GOP, while mipi_dsi_pixel_format_to_bpp() returns 24.
This commits switches the calculations in *_dsi_get_pclk() to use the bpp
from mipi_dsi_pixel_format_to_bpp(intel_dsi->pixel_format) which
returns the bpp going over the mipi lanes and drops the assert.
2) On BXT bxt_dsi_get_pipe_config() wrongly overrides the pipe_bpp which
i9xx_get_pipe_config() reads from PIPECONF with the return value from
mipi_dsi_pixel_format_to_bpp(). This avoids the assert from 1. but is wrong
since the pipe is actually running at the value configured in PIPECONF.
This commit drops the override of pipe_bpp from bxt_dsi_get_pipe_config().
3) The dsi encoder's compute_config() never assigns a value to pipe_bpp,
unlike most other encoders. Falling back on compute_baseline_pipe_bpp()
which always picks 24. 24 is only correct for MIPI_DSI_FMT_RGB88 for the
others we should use 18 bpp so that we correctly do 6bpc color dithering.
This commit adds code to intel_dsi_compute_config() to properly set
pipe_bpp based on intel_dsi->pixel_format.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181201113148.23184-1-hdegoede@redhat.com
