Address compiler warning:
ip_defrag.c: In function 'send_udp_frags':
ip_defrag.c:206:16: warning: unused variable 'udphdr' [-Wunused-variable]
struct udphdr udphdr;
^~~~~~
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
use a TDC plugin, instead of building eBPF programs in the 'setup' stage.
'-B' argument can be used to build eBPF programs in $EBPFDIR directory,
in the 'pre-suite' stage. Binaries are then cleaned in 'post-suite' stage.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
rely on uAPI headers in the current kernel tree, rather than requiring the
correct version installed on the test system. While at it, group all
sections in a single binary and test the 'section' parameter.
Reported-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add ipv4 and ipv6 test cases with an invalid metrics option causing
ip_metrics_convert to fail. Tests clean up path during route add.
Also, add nodad to to ipv6 address add. When running ipv6_route_metrics
directly seeing an occasional failure on the "Using route with mtu metric"
test case.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add ipv4 and ipv6 test cases for metrics (mtu) when fib entries are
created. Can be used with kmemleak to see leaks with both fib entries
and dst_entry.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Minor conflict in net/core/rtnetlink.c, David Ahern's bug fix in 'net'
overlapped the renaming of a netlink attribute in net-next.
Signed-off-by: David S. Miller <davem@davemloft.net>
Shuah writes:
"kselftest fixes for 4.19-rc7
This fixes update for 4.19-rc7 consists one fix to rseq test to
prevent it from seg-faulting when compiled with -fpie."
* tag 'linux-kselftest-4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
rseq/selftests: fix parametrized test with -fpie
This patch adds a new test for the new PTRACE_SYSEMU ptrace request.
This test also relies on PTRACE_GETREGS and PTRACE_SETREGS requests to
run properly, since the trace instruction (gettid() syscall) is being
modified at run-time (by PTRACE_SETREGS) and re-executed three times.
PTRACE_GETREGS is being used to check that the registers are still
sane.
This test basically creates a child process that executes syscalls
and the parent process check if it is being traced appropriately. The
parent process guarantees that the SYSCALLs are being traced, with
PTRACE_SYSEMU, and ptrace stops the child application before a syscall is
executed. The way the tests validates it, is by guaranteeing that the
system calls arguments, as argv[0] (r3) which is the same register that
will have the syscall return value on powerpc, are not being corrupted on
PTRACE_SYSEMU with a return value, i.e, it continues to have the current
arguments instead, meaning that the registers where not clobbered.
This test is basically the same test for x86 located at
tools/testing/selftests/x86/ptrace_syscall.c, limited to test PTRACE_SYSEMU
request, and ported to PowerPC.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add some tests that demonstrate and test the balanced lookup/free
nature of socket lookup. Section names that start with "fail" represent
programs that are expected to fail verification; all others should
succeed.
Signed-off-by: Joe Stringer <joe@wand.net.nz>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
reference tracking: leak potential reference
reference tracking: leak potential reference on stack
reference tracking: leak potential reference on stack 2
reference tracking: zero potential reference
reference tracking: copy and zero potential references
reference tracking: release reference without check
reference tracking: release reference
reference tracking: release reference twice
reference tracking: release reference twice inside branch
reference tracking: alloc, check, free in one subbranch
reference tracking: alloc, check, free in both subbranches
reference tracking in call: free reference in subprog
reference tracking in call: free reference in subprog and outside
reference tracking in call: alloc & leak reference in subprog
reference tracking in call: alloc in subprog, release outside
reference tracking in call: sk_ptr leak into caller stack
reference tracking in call: sk_ptr spill into caller stack
reference tracking: allow LD_ABS
reference tracking: forbid LD_ABS while holding reference
reference tracking: allow LD_IND
reference tracking: forbid LD_IND while holding reference
reference tracking: check reference or tail call
reference tracking: release reference then tail call
reference tracking: leak possible reference over tail call
reference tracking: leak checked reference over tail call
reference tracking: mangle and release sock_or_null
reference tracking: mangle and release sock
reference tracking: access member
reference tracking: write to member
reference tracking: invalid 64-bit access of member
reference tracking: access after release
reference tracking: direct access for lookup
unpriv: spill/fill of different pointers stx - ctx and sock
unpriv: spill/fill of different pointers stx - leak sock
unpriv: spill/fill of different pointers stx - sock and ctx (read)
unpriv: spill/fill of different pointers stx - sock and ctx (write)
Signed-off-by: Joe Stringer <joe@wand.net.nz>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Don't hardcode the dummy program types to SOCKET_FILTER type, as this
prevents testing bpf_tail_call in conjunction with other program types.
Instead, use the program type specified in the test case.
Signed-off-by: Joe Stringer <joe@wand.net.nz>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch adds new BPF helper functions, bpf_sk_lookup_tcp() and
bpf_sk_lookup_udp() which allows BPF programs to find out if there is a
socket listening on this host, and returns a socket pointer which the
BPF program can then access to determine, for instance, whether to
forward or drop traffic. bpf_sk_lookup_xxx() may take a reference on the
socket, so when a BPF program makes use of this function, it must
subsequently pass the returned pointer into the newly added sk_release()
to return the reference.
By way of example, the following pseudocode would filter inbound
connections at XDP if there is no corresponding service listening for
the traffic:
struct bpf_sock_tuple tuple;
struct bpf_sock_ops *sk;
populate_tuple(ctx, &tuple); // Extract the 5tuple from the packet
sk = bpf_sk_lookup_tcp(ctx, &tuple, sizeof tuple, netns, 0);
if (!sk) {
// Couldn't find a socket listening for this traffic. Drop.
return TC_ACT_SHOT;
}
bpf_sk_release(sk, 0);
return TC_ACT_OK;
Signed-off-by: Joe Stringer <joe@wand.net.nz>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The array "reg_type_str" provides canonical formatting of register
types, however a couple of places would previously check whether a
register represented the context and write the name "context" directly.
An upcoming commit will add another pointer type to these statements, so
to provide more accurate error messages in the verifier, update these
error messages to use "reg_type_str" instead.
Signed-off-by: Joe Stringer <joe@wand.net.nz>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
An upcoming commit will add another two pointer types that need very
similar behaviour, so generalise this function now.
Signed-off-by: Joe Stringer <joe@wand.net.nz>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Pull v4.20 RCU changes from Paul E. McKenney:
- Documentation updates, including some good-eye catches from
Joel Fernandes.
- SRCU updates, most notably changes enabling call_srcu() to be
invoked very early in the boot sequence.
- Torture-test updates, including some preliminary work towards
making rcutorture better able to find problems that result in
insufficient grace-period forward progress.
- Consolidate the RCU-bh, RCU-preempt, and RCU-sched flavors into
a single flavor similar to RCU-sched in !PREEMPT kernels and
into a single flavor similar to RCU-preempt (but also waiting
on preempt-disabled sequences of code) in PREEMPT kernels. This
branch also includes a refactoring of rcu_{nmi,irq}_{enter,exit}()
from Byungchul Park.
- Now that there is only one RCU flavor in any given running kernel,
the many "rsp" pointers are no longer required, and this cleanup
series removes them.
- This branch carries out additional cleanups made possible by
the RCU flavor consolidation, including inlining how-trivial
functions, updating comments and definitions, and removing
now-unneeded rcutorture scenarios.
- Initial changes to RCU to better promote forward progress of
grace periods, including fixing a bug found by Marius Hillenbrand
and David Woodhouse, with the fix suggested by Peter Zijlstra.
- Now that there is only one flavor of RCU in any running kernel,
there is also only on rcu_data structure per CPU. This means
that the rcu_dynticks structure can be merged into the rcu_data
structure, a task taken on by this branch. This branch also
contains a -rt-related fix from Mike Galbraith.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
TLS test cases splice_from_pipe, send_and_splice &
recv_peek_multiple_records expect to receive a given nummber of bytes
and then compare them against the number of bytes which were sent.
Therefore, system call recv() must not return before receiving the
requested number of bytes, otherwise the subsequent memcmp() fails.
This patch passes MSG_WAITALL flag to recv() so that it does not return
prematurely before requested number of bytes are copied to receive
buffer.
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit adds a bpf kselftest, which demonstrates how percpu
and shared cgroup local storage can be used for efficient lookup-free
network accounting.
Cgroup local storage provides generic memory area with a very efficient
lookup free access. To avoid expensive atomic operations for each
packet, per-cpu cgroup local storage is used. Each packet is initially
charged to a per-cpu counter, and only if the counter reaches certain
value (32 in this case), the charge is moved into the global atomic
counter. This allows to amortize atomic operations, keeping reasonable
accuracy.
The test also implements a naive network traffic throttling, mostly to
demonstrate the possibility of bpf cgroup--based network bandwidth
control.
Expected output:
./test_netcnt
test_netcnt:PASS
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This test extends the cgroup storage test to use per-cpu flavor
of the cgroup storage as well.
The test initializes a per-cpu cgroup storage to some non-zero initial
value (1000), and then simple bumps a per-cpu counter each time
the shared counter is atomically incremented. Then it reads all
per-cpu areas from the userspace side, and checks that the sum
of values adds to the expected sum.
Expected output:
$ ./test_cgroup_storage
test_cgroup_storage:PASS
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This commits adds verifier tests covering per-cpu cgroup storage
functionality. There are 6 new tests, which are exactly the same
as for shared cgroup storage, but do use per-cpu cgroup storage
map.
Expected output:
$ ./test_verifier
#0/u add+sub+mul OK
#0/p add+sub+mul OK
...
#286/p invalid cgroup storage access 6 OK
#287/p valid per-cpu cgroup storage access OK
#288/p invalid per-cpu cgroup storage access 1 OK
#289/p invalid per-cpu cgroup storage access 2 OK
#290/p invalid per-cpu cgroup storage access 3 OK
#291/p invalid per-cpu cgroup storage access 4 OK
#292/p invalid per-cpu cgroup storage access 5 OK
#293/p invalid per-cpu cgroup storage access 6 OK
#294/p multiple registers share map_lookup_elem result OK
...
#662/p mov64 src == dst OK
#663/p mov64 src != dst OK
Summary: 914 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Instead of storing a pointer to the slot containing the canonical entry,
store the offset of the slot. Produces slightly more efficient code
(~300 bytes) and simplifies the implementation.
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Introduce xarray value entries and tagged pointers to replace radix
tree exceptional entries. This is a slight change in encoding to allow
the use of an extra bit (we can now store BITS_PER_LONG - 1 bits in a
value entry). It is also a change in emphasis; exceptional entries are
intimidating and different. As the comment explains, you can choose
to store values or pointers in the xarray and they are both first-class
citizens.
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Josef Bacik <jbacik@fb.com>
An upcoming change to the encoding of internal entries will set the bottom
two bits to 0b10. Unfortunately, m68k only aligns some data structures
to 2 bytes, so the IDR will interpret them as internal entries and things
will go badly wrong.
Change the radix tree so that it stops either when the node indicates
that it's the bottom of the tree (shift == 0) or when the entry is not an
internal entry. This means we cannot insert an arbitrary kernel pointer
as a multiorder entry, but the IDR does not permit multiorder entries.
Annoyingly, this means the IDR can no longer take advantage of the radix
tree's ability to store a single entry at offset 0 without allocating
memory. A pointer which is 2-byte aligned cannot be stored directly in
the root as it would be indistinguishable from a node, so we must allocate
a node in order to store a 2-byte pointer at index 0. The idr_replace()
function does not take a GFP flags argument, so cannot allocate memory.
If a user inserts a 4-byte aligned pointer at index 0 and then replaces
it with a 2-byte aligned pointer, we must be able to store it.
Arbitrary pointer values are still not permitted; pointers of the
form 2 + (i * 4) for values of i between 0 and 1023 are reserved for
the implementation. These are not valid kernel pointers as they would
point into the zero page.
This change does cause a runtime memory consumption regression for
the IDA. I will recover that later.
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Michael writes:
"powerpc fixes for 4.19 #3
A reasonably big batch of fixes due to me being away for a few weeks.
A fix for the TM emulation support on Power9, which could result in
corrupting the guest r11 when running under KVM.
Two fixes to the TM code which could lead to userspace GPR corruption
if we take an SLB miss at exactly the wrong time.
Our dynamic patching code had a bug that meant we could patch freed
__init text, which could lead to corrupting userspace memory.
csum_ipv6_magic() didn't work on little endian platforms since we
optimised it recently.
A fix for an endian bug when reading a device tree property telling
us how many storage keys the machine has available.
Fix a crash seen on some configurations of PowerVM when migrating the
partition from one machine to another.
A fix for a regression in the setup of our CPU to NUMA node mapping
in KVM guests.
A fix to our selftest Makefiles to make them work since a recent
change to the shared Makefile logic."
* tag 'powerpc-4.19-3' of https://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Fix Makefiles for headers_install change
powerpc/numa: Use associativity if VPHN hcall is successful
powerpc/tm: Avoid possible userspace r1 corruption on reclaim
powerpc/tm: Fix userspace r13 corruption
powerpc/pseries: Fix unitialized timer reset on migration
powerpc/pkeys: Fix reading of ibm, processor-storage-keys property
powerpc: fix csum_ipv6_magic() on little endian platforms
powerpc/powernv/ioda2: Reduce upper limit for DMA window size (again)
powerpc: Avoid code patching freed init sections
KVM: PPC: Book3S HV: Fix guest r11 corruption with POWER9 TM workarounds
This test adds an fdb entry with the sticky flag and sends traffic from
a different port with the same mac as a source address expecting the entry
to not change ports if the flag is operating correctly.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit b2d35fa5fc ("selftests: add headers_install to lib.mk")
introduced a requirement that Makefiles more than one level below the
selftests directory need to define top_srcdir, but it didn't update
any of the powerpc Makefiles.
This broke building all the powerpc selftests with eg:
make[1]: Entering directory '/src/linux/tools/testing/selftests/powerpc'
BUILD_TARGET=/src/linux/tools/testing/selftests/powerpc/alignment; mkdir -p $BUILD_TARGET; make OUTPUT=$BUILD_TARGET -k -C alignment all
make[2]: Entering directory '/src/linux/tools/testing/selftests/powerpc/alignment'
../../lib.mk:20: ../../../../scripts/subarch.include: No such file or directory
make[2]: *** No rule to make target '../../../../scripts/subarch.include'.
make[2]: Failed to remake makefile '../../../../scripts/subarch.include'.
Makefile:38: recipe for target 'alignment' failed
Fix it by setting top_srcdir in the affected Makefiles.
Fixes: b2d35fa5fc ("selftests: add headers_install to lib.mk")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use newly introduced libbpf_attach_type_by_name in test_socket_cookie
selftest.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-09-25
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Allow for RX stack hardening by implementing the kernel's flow
dissector in BPF. Idea was originally presented at netconf 2017 [0].
Quote from merge commit:
[...] Because of the rigorous checks of the BPF verifier, this
provides significant security guarantees. In particular, the BPF
flow dissector cannot get inside of an infinite loop, as with
CVE-2013-4348, because BPF programs are guaranteed to terminate.
It cannot read outside of packet bounds, because all memory accesses
are checked. Also, with BPF the administrator can decide which
protocols to support, reducing potential attack surface. Rarely
encountered protocols can be excluded from dissection and the
program can be updated without kernel recompile or reboot if a
bug is discovered. [...]
Also, a sample flow dissector has been implemented in BPF as part
of this work, from Petar and Willem.
[0] http://vger.kernel.org/netconf2017_files/rx_hardening_and_udp_gso.pdf
2) Add support for bpftool to list currently active attachment
points of BPF networking programs providing a quick overview
similar to bpftool's perf subcommand, from Yonghong.
3) Fix a verifier pruning instability bug where a union member
from the register state was not cleared properly leading to
branches not being pruned despite them being valid candidates,
from Alexei.
4) Various smaller fast-path optimizations in XDP's map redirect
code, from Jesper.
5) Enable to recognize BPF_MAP_TYPE_REUSEPORT_SOCKARRAY maps
in bpftool, from Roman.
6) Remove a duplicate check in libbpf that probes for function
storage, from Taeung.
7) Fix an issue in test_progs by avoid checking for errno since
on success its value should not be checked, from Mauricio.
8) Fix unused variable warning in bpf_getsockopt() helper when
CONFIG_INET is not configured, from Anders.
9) Fix a compilation failure in the BPF sample code's use of
bpf_flow_keys, from Prashant.
10) Minor cleanups in BPF code, from Yue and Zhong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Version bump conflict in batman-adv, take what's in net-next.
iavf conflict, adjustment of netdev_ops in net-next conflicting
with poll controller method removal in net.
Signed-off-by: David S. Miller <davem@davemloft.net>
Dave writes:
"Networking fixes:
1) Fix multiqueue handling of coalesce timer in stmmac, from Jose
Abreu.
2) Fix memory corruption in NFC, from Suren Baghdasaryan.
3) Don't write reserved bits in ravb driver, from Kazuya Mizuguchi.
4) SMC bug fixes from Karsten Graul, YueHaibing, and Ursula Braun.
5) Fix TX done race in mvpp2, from Antoine Tenart.
6) ipv6 metrics leak, from Wei Wang.
7) Adjust firmware version requirements in mlxsw, from Petr Machata.
8) Fix autonegotiation on resume in r8169, from Heiner Kallweit.
9) Fixed missing entries when dumping /proc/net/if_inet6, from Jeff
Barnhill.
10) Fix double free in devlink, from Dan Carpenter.
11) Fix ethtool regression from UFO feature removal, from Maciej
Żenczykowski.
12) Fix drivers that have a ndo_poll_controller() that captures the
cpu entirely on loaded hosts by trying to drain all rx and tx
queues, from Eric Dumazet.
13) Fix memory corruption with jumbo frames in aquantia driver, from
Friedemann Gerold."
* gitolite.kernel.org:/pub/scm/linux/kernel/git/davem/net: (79 commits)
net: mvneta: fix the remaining Rx descriptor unmapping issues
ip_tunnel: be careful when accessing the inner header
mpls: allow routes on ip6gre devices
net: aquantia: memory corruption on jumbo frames
tun: remove ndo_poll_controller
nfp: remove ndo_poll_controller
bnxt: remove ndo_poll_controller
bnx2x: remove ndo_poll_controller
mlx5: remove ndo_poll_controller
mlx4: remove ndo_poll_controller
i40evf: remove ndo_poll_controller
ice: remove ndo_poll_controller
igb: remove ndo_poll_controller
ixgb: remove ndo_poll_controller
fm10k: remove ndo_poll_controller
ixgbevf: remove ndo_poll_controller
ixgbe: remove ndo_poll_controller
bonding: use netpoll_poll_dev() helper
netpoll: make ndo_poll_controller() optional
rds: Fix build regression.
...
This patch adds ipv6 defragmentation tests to ip_defrag selftest,
to complement existing ipv4 tests.
Signed-off-by: Peter Oskolkov <posk@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ensure that sockets added to a sock{map|hash} that is not in the
ESTABLISHED state is rejected.
Fixes: 1aa12bdf1b ("bpf: sockmap, add sock close() hook to remove socks")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Paolo writes:
"It's mostly small bugfixes and cleanups, mostly around x86 nested
virtualization. One important change, not related to nested
virtualization, is that the ability for the guest kernel to trap
CPUID instructions (in Linux that's the ARCH_SET_CPUID arch_prctl) is
now masked by default. This is because the feature is detected
through an MSR; a very bad idea that Intel seems to like more and
more. Some applications choke if the other fields of that MSR are
not initialized as on real hardware, hence we have to disable the
whole MSR by default, as was the case before Linux 4.12."
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (23 commits)
KVM: nVMX: Fix bad cleanup on error of get/set nested state IOCTLs
kvm: selftests: Add platform_info_test
KVM: x86: Control guest reads of MSR_PLATFORM_INFO
KVM: x86: Turbo bits in MSR_PLATFORM_INFO
nVMX x86: Check VPID value on vmentry of L2 guests
nVMX x86: check posted-interrupt descriptor addresss on vmentry of L2
KVM: nVMX: Wake blocked vCPU in guest-mode if pending interrupt in virtual APICv
KVM: VMX: check nested state and CR4.VMXE against SMM
kvm: x86: make kvm_{load|put}_guest_fpu() static
x86/hyper-v: rename ipi_arg_{ex,non_ex} structures
KVM: VMX: use preemption timer to force immediate VMExit
KVM: VMX: modify preemption timer bit only when arming timer
KVM: VMX: immediately mark preemption timer expired only for zero value
KVM: SVM: Switch to bitmap_zalloc()
KVM/MMU: Fix comment in walk_shadow_page_lockless_end()
kvm: selftests: use -pthread instead of -lpthread
KVM: x86: don't reset root in kvm_mmu_setup()
kvm: mmu: Don't read PDPTEs when paging is not enabled
x86/kvm/lapic: always disable MMIO interface in x2APIC mode
KVM: s390: Make huge pages unavailable in ucontrol VMs
...
A so-called "MC-aware" mode has recently been enabled in mlxsw. In
MC-aware mode, BUM traffic is handled in a special way so that when a
switch is flooded with BUM, UC performance isn't unduly impacted.
Without enablement of this mode, a stream of BUM traffic can cause
sustained UC throughput drop in excess of 99 %.
Add a test for this behavior. Compare how much UC throughput degrades as
a stream of broadcast frames floods the switch. A minimal degradation is
tolerated to cover for glitches in traffic injection performance.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some selftests need to tweak MTU of an interface, and naturally should
at teardown restore the MTU back to the original value. Add two
functions to facilitate this MTU handling: mtu_set() to change MTU
value, and mtu_reset() to change it back to what it was before.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test guest access to MSR_PLATFORM_INFO when the capability is enabled
or disabled.
Signed-off-by: Drew Schmitt <dasch@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
I run into the following error
testing/selftests/kvm/dirty_log_test.c:285: undefined reference to `pthread_create'
testing/selftests/kvm/dirty_log_test.c:297: undefined reference to `pthread_join'
collect2: error: ld returned 1 exit status
my gcc version is gcc version 4.8.4
"-pthread" would work everywhere
Signed-off-by: Lei Yang <Lei.Yang@windriver.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are cases where the test is not expecting to have the transaction
aborted, but, the test process might have been rescheduled, either in the
OS level or by KVM (if it is running on a KVM guest machine). The process
reschedule will cause a treclaim/recheckpoint which will cause the
transaction to doom, aborting the transaction as soon as the process is
rescheduled back to the CPU. This might cause the test to fail, but this is
not a failure in essence.
If that is the case, TEXASR[FC] is indicated with either
TM_CAUSE_RESCHEDULE or TM_CAUSE_KVM_RESCHEDULE for KVM interruptions.
In this scenario, ignore these two failures and avoid the whole test to
return failure.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Gustavo Romero <gromero@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The cleanup function uses "$CMD 2 > /dev/null", which doesn't actually
send stderr to /dev/null, so when the netns doesn't exist, the error
message is shown. Use "2> /dev/null" instead, so that those messages
disappear, as was intended.
Fixes: d1f1b9cbf3 ("selftests: net: Introduce first PMTU test")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Two new tls tests added in parallel in both net and net-next.
Used Stephen Rothwell's linux-next resolution.
Signed-off-by: David S. Miller <davem@davemloft.net>
Dave writes:
"Various fixes, all over the place:
1) OOB data generation fix in bluetooth, from Matias Karhumaa.
2) BPF BTF boundary calculation fix, from Martin KaFai Lau.
3) Don't bug on excessive frags, to be compatible in situations mixing
older and newer kernels on each end. From Juergen Gross.
4) Scheduling in RCU fix in hv_netvsc, from Stephen Hemminger.
5) Zero keying information in TLS layer before freeing copies
of them, from Sabrina Dubroca.
6) Fix NULL deref in act_sample, from Davide Caratti.
7) Orphan SKB before GRO in veth to prevent crashes with XDP,
from Toshiaki Makita.
8) Fix use after free in ip6_xmit, from Eric Dumazet.
9) Fix VF mac address regression in bnxt_en, from Micahel Chan.
10) Fix MSG_PEEK behavior in TLS layer, from Daniel Borkmann.
11) Programming adjustments to r8169 which fix not being to enter deep
sleep states on some machines, from Kai-Heng Feng and Hans de
Goede.
12) Fix DST_NOCOUNT flag handling for ipv6 routes, from Peter
Oskolkov."
* gitolite.kernel.org:/pub/scm/linux/kernel/git/davem/net: (45 commits)
net/ipv6: do not copy dst flags on rt init
qmi_wwan: set DTR for modems in forced USB2 mode
clk: x86: Stop marking clocks as CLK_IS_CRITICAL
r8169: Get and enable optional ether_clk clock
clk: x86: add "ether_clk" alias for Bay Trail / Cherry Trail
r8169: enable ASPM on RTL8106E
r8169: Align ASPM/CLKREQ setting function with vendor driver
Revert "kcm: remove any offset before parsing messages"
kcm: remove any offset before parsing messages
net: ethernet: Fix a unused function warning.
net: dsa: mv88e6xxx: Fix ATU Miss Violation
tls: fix currently broken MSG_PEEK behavior
hv_netvsc: pair VF based on serial number
PCI: hv: support reporting serial number as slot information
bnxt_en: Fix VF mac address regression.
ipv6: fix possible use-after-free in ip6_xmit()
net: hp100: fix always-true check for link up state
ARM: dts: at91: add new compatibility string for macb on sama5d3
net: macb: disable scatter-gather for macb on sama5d3
net: mvpp2: let phylink manage the carrier state
...
A number of tls selftests rely upon recv() to return an exact number of
data bytes. When tls record crypto is done using an async accelerator,
it is possible that recv() returns lesser than expected number bytes.
This leads to failure of many test cases. To fix it, MSG_WAITALL has
been used in flags passed to recv() syscall.
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
