After the kernel 4.4, the DRM disable flow was changed, if DPI was
disableed before CRTC, it will cause warning message as following:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1339 at ../../linux/linux-4.4.24-mtk/drivers/gpu/drm/drm_irq.c:1326 drm_wait_one_vblank+0x188/0x18c()
vblank wait timed out on crtc 0
Modules linked in: bridge mt8521p_ir_shim(O) i2c_eeprom(O) mtk_m4(O) fuse_ctrl(O) virtual_block(O) caamkeys(PO) chk(PO) amperctl(O) ledctl(O) apple_auth(PO) micctl(O) sensors(PO) lla(O) sdd(PO) ice40_fpga(O) psmon(O) event_queue(PO) utils(O) blackbox(O)
CPU: 0 PID: 1339 Comm: kworker/0:1 Tainted: P W O 4.4.24 #1
Hardware name: Mediatek Cortex-A7 (Device Tree)
Workqueue: events drm_mode_rmfb_work_fn
[<c001a710>] (unwind_backtrace) from [<c00151e4>] (show_stack+0x20/0x24)
[<c00151e4>] (show_stack) from [<c027961c>] (dump_stack+0x98/0xac)
[<c027961c>] (dump_stack) from [<c002ac54>] (warn_slowpath_common+0x94/0xc4)
[<c002ac54>] (warn_slowpath_common) from [<c002acc4>] (warn_slowpath_fmt+0x40/0x48)
[<c002acc4>] (warn_slowpath_fmt) from [<c03307ac>] (drm_wait_one_vblank+0x188/0x18c)
[<c03307ac>] (drm_wait_one_vblank) from [<c03307d8>] (drm_crtc_wait_one_vblank+0x28/0x2c)
[<c03307d8>] (drm_crtc_wait_one_vblank) from [<c034f48c>] (mtk_drm_crtc_disable+0x78/0x240)
[<c034f48c>] (mtk_drm_crtc_disable) from [<c03240d4>] (drm_atomic_helper_commit_modeset_disables+0x128/0x3b8)
[<c03240d4>] (drm_atomic_helper_commit_modeset_disables) from [<c0350a7c>] (mtk_atomic_complete+0x74/0xb4)
[<c0350a7c>] (mtk_atomic_complete) from [<c0350b24>] (mtk_atomic_commit+0x68/0x98)
[<c0350b24>] (mtk_atomic_commit) from [<c034ab48>] (drm_atomic_commit+0x54/0x74)
[<c034ab48>] (drm_atomic_commit) from [<c0325c4c>] (drm_atomic_helper_set_config+0x7c/0xa0)
[<c0325c4c>] (drm_atomic_helper_set_config) from [<c0338594>] (drm_mode_set_config_internal+0x68/0xe4)
[<c0338594>] (drm_mode_set_config_internal) from [<c033967c>] (drm_framebuffer_remove+0xe4/0x120)
[<c033967c>] (drm_framebuffer_remove) from [<c0339700>] (drm_mode_rmfb_work_fn+0x48/0x58)
[<c0339700>] (drm_mode_rmfb_work_fn) from [<c0043a38>] (process_one_work+0x154/0x50c)
[<c0043a38>] (process_one_work) from [<c0044074>] (worker_thread+0x284/0x568)
[<c0044074>] (worker_thread) from [<c0049dc4>] (kthread+0xec/0x104)
[<c0049dc4>] (kthread) from [<c0010678>] (ret_from_fork+0x14/0x3c)
---[ end trace 12ae5358e992abd5 ]---
so, we add refcount for DPI power on/off to protect the flow.
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
AFBC buffers include additional metadata which increases the required
allocation size. Implement the appropriate size validation and sanity
checking for AFBC buffers.
Added malidp specific function for framebuffer creation. This checks
if the framebuffer has AFBC modifiers and if so, it verifies the
necessary constraints on the size, alignment, offsets and pitch.
Changes from v2:
- Replaced DRM_ERROR() with DRM_DEBUG_KMS() in
malidp_verify_afbc_framebuffer_caps() and malidp_verify_afbc_framebuffer_size()
Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com>
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Add support for compressed framebuffers that are described using
the framebuffer's modifier field. Mali DP uses the rotation memory for
the decompressor of the format, so we need to check for space when
the modifiers are present.
Signed-off-by: Ayan Kumar Halder <ayan.halder@arm.com>
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
[re-worded commit, rebased, cleaned up duplicated checks for
RGB888 and BGR888 and removed additional parameter for
rotmem_required function hook]
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Mali-DP650 supports warming up the SMMU translations, by sending
requsts to the SMMU before a buffer is read.
There are two modes supported:
- PARTIAL: could be enabled when the buffer is composed of 4K or 64K
pages, the display hardware will send a configurable number of
requests before the actual reading.
- FULL: could be enabled when the buffer is composed of 1M or 2M
pages, the display hardware will send requests before reading for
all pages composing the buffer.
This patch adds a mechanism for detecting the page size and set the
MMU prefetch mode if possible.
Changes since v1:
- For imported buffers use the already populated
drm_gem_cma_object.sgt instead of calling
driver.gem_prime_get_sg_table, which works just for buffers
allocated through the gem_cma API.
Signed-off-by: Jamie Fox <jamie.fox@arm.com>
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
[rebased and re-ordered functions]
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Checks the pixel blending mode and plane alpha value when
do the plane_check. Mali DP supports blending the current plane
with the background either based on the pixel alpha blending
mode or by using the layer's alpha value, but not both at the
same time. If both case, plane_check will return failed.
Sets the HW when doing plane_update accordingly. If plane alpha
is the 0xffff, set the pixel blending bits accordingly. If not
we'd set ALPHA bit as zero and layer alpha value.
Changes since v1:
- Introduces to use it in the malidp driver, which depends on
the plane alpha patch
Changes since v2:
- Refines the comments of drm/mali-dp patchset
Changes since v3:
- Adds hardware limitation check
Changes since v4:
- Updates on drm/malidp, hardware limitation check only when
the format has alpha pixel.
- Rebases on drm-misc-next.
Signed-off-by: Lowry Li <lowry.li@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Smart layer enable rectangles is set to 1 when the driver is probed,
however when doing pm_suspend the value is lost and it's not set again
making the SMART_LAYER unusable, fix that by initializing the number
of rectangles everytime we do a plane update.
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
When we want to writeback to memory in NV12 format we need to program
the RGB2YUV coefficients. Currently, we don't program the coefficients
and NV12 doesn't work at all.
This patchset fixes that by programming a sane default(bt709, limited
range) as rgb2yuv coefficients.
In the long run, probably we need to think of a way for userspace to
be able to program that, but for now I think this is better than not
working at all or not advertising NV12 as a supported format for
memwrite.
Changes since v1:
- Write the rgb2yuv coefficients only once, since we don't change
them at all, just write them the first time NV12 is programmed,
suggested by Brian Starkey, here [1]
[1] https://lists.freedesktop.org/archives/dri-devel/2018-August/186819.html
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Currently, if userspace calls drm_wait_vblank before the crtc is
activated the crtc vblank_enable hook is called, which in case of
malidp driver triggers some warninngs. This happens because on
device init we don't inform the drm core about the vblank state
by calling drm_crtc_vblank_on/off/reset which together with
drm_vblank_get have some magic that prevents calling drm_vblank_enable
when crtc is off.
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
fd_install() moves the reference given to it into the file descriptor table
of the current process. If the current process is multithreaded, then
immediately after fd_install(), another thread can close() the file
descriptor and cause the file's resources to be cleaned up.
Since the reference to "lessee" is held by the file, we must not access
"lessee" after the fd_install() call.
As far as I can tell, to reach this codepath, the caller must have an open
file descriptor to a DRI device in master mode. I'm not sure what the
requirements for that are.
Signed-off-by: Jann Horn <jannh@google.com>
Fixes: 62884cd386 ("drm: Add four ioctls for managing drm mode object leases [v7]")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001153117.216923-1-jannh@google.com
omap_connector_destroy() does:
kfree(omap_connector);
omapdss_device_put(omap_connector->output);
omapdss_device_put(omap_connector->display);
Fix this by moving the kfree after the omapdss_device_puts.
This bug was introduced in 949ea2ef3f
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
This patch unifies the naming of DRM functions for reference counting
of struct drm_gem_object. The resulting code is more aligned with the
rest of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
This patch unifies the naming of DRM functions for reference counting
of struct drm_gem_object. The resulting code is more aligned with the
rest of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
drm_format_info table has a field 'is_yuv' to denote if the format
is yuv or not. The driver is expected to use this instead of
having a function for the same purpose.
Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Errata i878 says that MPU should not be used to access RAM and DMM at
the same time. As it's not possible to prevent MPU accessing RAM, we
need to access DMM via a proxy.
This patch changes DMM driver to access DMM registers via sDMA. Instead
of doing a normal readl/writel call to read/write a register, we use
sDMA to copy 4 bytes from/to the DMM registers.
This patch provides only a partial workaround for i878, as not only DMM
register reads/writes are affected, but also accesses to the DMM mapped
buffers (framebuffers, usually).
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
The interrupts should be enabled after the driver initialization to avoid
early interrupts while the driver is not yet ready to handle them.
On removal the interrupts must be disabled before other resources are
released, freed up.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
A DMM timeout "timed out waiting for done" has been observed on DRA7
devices. The timeout happens rarely, and only when the system is under
heavy load.
Debugging showed that the timeout can be made to happen much more
frequently by optimizing the DMM driver, so that there's almost no code
between writing the last DMM descriptors to RAM, and writing to DMM
register which starts the DMM transaction.
The current theory is that a wmb() does not properly ensure that the
data written to RAM is observable by all the components in the system.
This DMM timeout has caused interesting (and rare) bugs as the error
handling was not functioning properly (the error handling has been fixed
in previous commits):
* If a DMM timeout happened when a GEM buffer was being pinned for
display on the screen, a timeout error would be shown, but the driver
would continue programming DSS HW with broken buffer, leading to
SYNCLOST floods and possible crashes.
* If a DMM timeout happened when other user (say, video decoder) was
pinning a GEM buffer, a timeout would be shown but if the user
handled the error properly, no other issues followed.
* If a DMM timeout happened when a GEM buffer was being released, the
driver does not even notice the error, leading to crashes or hang
later.
This patch adds wmb() and readl() calls after the last bit is written to
RAM, which should ensure that the execution proceeds only after the data
is actually in RAM, and thus observable by DMM.
The read-back should not be needed. Further study is required to understand
if DMM is somehow special case and read-back is ok, or if DRA7's memory
barriers do not work correctly.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/omapdrm/dss/dispc.c: In function 'dispc_ovl_setup_common':
drivers/gpu/drm/omapdrm/dss/dispc.c:2627:19: warning:
variable 'frame_height' set but not used [-Wunused-but-set-variable]
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
tcm-sita.h is unused since commit 0d6fa53fd8 ("drm/omap: Use bitmaps for TILER placement")
Let's remove it.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
convert drm_atomic_helper_suspend/resume() to use
drm_mode_config_helper_suspend/resume().
saved_state in tilcdc_drm_private will not be used
anymore, so it can be removed.
Signed-off-by: Ajit Negi <ajitn.linux@gmail.com>
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Tested-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
The mixer hardware supports variable plane alpha. Currently planes are
opaque, make this configurable.
Tested on Odroid-U3 with Exynos 4412 CPU, kernel next-20180913
using modetest.
Signed-off-by: Christoph Manszewski <c.manszewski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The mixer hardware supports both premultiplied alpha and
non-premultiplied alpha. Currently premultiplied alpha is default, make
this configurable.
Tested on Odroid-U3 with Exynos 4412 CPU, kernel next-20180913
using modetest.
Signed-off-by: Christoph Manszewski <c.manszewski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Make use of helper functions in exynos_drm_plane_reset in order to set
all default values. Currently alpha isn't set during reset.
Signed-off-by: Christoph Manszewski <c.manszewski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Instead of allocating a fake IOMMU domain for all Exynos DRM components,
simply reuse the default IOMMU domain of the already selected DMA device.
This allows some design changes in IOMMU framework without breaking IOMMU
support in Exynos DRM.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Add support for 16x16 tiled formats: NV12/NV21, YUYV and YUV420.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixed line over 80 characters warning
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Introduce xarray value entries and tagged pointers to replace radix
tree exceptional entries. This is a slight change in encoding to allow
the use of an extra bit (we can now store BITS_PER_LONG - 1 bits in a
value entry). It is also a change in emphasis; exceptional entries are
intimidating and different. As the comment explains, you can choose
to store values or pointers in the xarray and they are both first-class
citizens.
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Make the process of looking up a user resource and adding it to the
validation list reference-free unless when it's actually added to the
validation list where a single reference is taken.
This saves two locked atomic operations per command stream buffer object
handle lookup, unless there is a lookup cache hit.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
The typical pattern of these lookups are
-Lookup
-Put on validate list if not already there.
-Unreference
And since we are the exclusive user of the context during lookup time,
we can be sure that the resource will stay alive during the sequence.
So avoid taking a reference during lookup, and also avoid unreferencing
when done. There are two users outside of command buffer validation and
those are refcounted explicitly.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
The typical pattern of these lookups are
-Lookup
-Put on validate list if not already there.
-Unreference
And since we are the exclusive user of the context during lookup time,
we can be sure that the resource will stay alive during the sequence.
So avoid taking a reference during lookup, and also avoid unreferencing
when done.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Make the process of looking up a buffer object and adding it to the
validation list reference-free unless when it's actually added to the
validation list where a single reference is taken.
This saves two locked atomic operations per command stream buffer object
handle lookup.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Identically to how we look up ttm base objects witout reference, provide
the same functionality to vmw user buffer objects which derive from them.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Adapt the validation code so that vmw_validation_add[res|bo] can be called
under an rcu read lock (non-sleeping) and with rcu-only protected resource-
or buffer object pointers.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Export ttm_bo_get_unless_zero() to be used when looking up buffer
objects that are removed from the lookup structure in the destructor.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Driver Changes:
- Bugzilla 107600: Fix stuttering video playback on MythTV on old hardware (Chris)
- Avoid black screen when using CSC coefficient matrix (Raviraj)
- Hammer PDs on Baytrail to make sure they reload (Chris)
- Capture some objects if unable to capture all, on error (Chris)
- Add W/A for 16 GB DIMMs on SKL+ (Mahesh)
- Only enable IPC for symmetric memory configurations on KBL+ (Mahesh)
- Assume pipe A to have maximum stride limits (Ville)
- Always update update OA contexts via context image (Tvrtko)
- Icelake enabling patches (Madhav, Dhinakaran)
- Add Icelake DMC firmware (Anusha)
- Fixes for CI found corner cases (Chris)
- Limit the backpressure for request allocation (Chris)
- Park GPU on module load so usage starts from known state (Chris)
- Flush tasklet when checking for idle (Chris)
- Use coherent write into the context image on BSW+ (Chris)
- Fix possible integer overflow for framebuffers that get aligned past 4GiB (Ville)
- Downgrade fence timeout from warn to notice and add debug hint (Chris)
- Fixes to multi function encoder code (Ville)
- Fix sprite plane check logic (Dan, Ville)
- PAGE_SIZE vs. I915_GTT_PAGE_SIZE fixes (Ville)
- Decode memory bandwidth and parameters for BXT and SKL+ (Mahesh)
- Overwrite BIOS set IPC value from KMS (Mahesh)
- Multiple pipe handling code cleanups/restructurings/optimizations (Ville)
- Spare low 4G address for non-48bit objects (Chris)
- Free context_setparam of struct_mutex (Chris)
- Delay updating ring register state on resume (Chris)
- Avoid unnecessarily copying overlay IOCTL parameters (Chris)
- Update GuC power domain states even without submission (Michal)
- Restore GuC preempt-context across S3/S4 (Chris)
- Add kernel selftest for rapid context switching (Chris)
- Keep runtime power management ref for live selftests (Chris)
- GEM code cleanups (Matt)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180927095933.GA11458@jlahtine-desk.ger.corp.intel.com
[Why]
EDID emulation didn't work properly for linux, as we stop programming
if nothing is connected physically.
[How]
We get a flag from DRM when we want to do edid emulation. We check if
this flag is true and nothing is connected physically, if so we only
program the front end using VIRTUAL_SIGNAL.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There have been a few reports of Vega10 display remaining blank
after S3 resume. The regression is caused by workaround for mode
change on Vega10 - skip set_bandwidth if stream count is 0.
As a result we skipped dispclk reset on suspend, thus on resume
we may skip the clock update assuming it hasn't been changed.
On some systems it causes display blank or 'out of range'.
[How]
Revert "drm/amd/display: Fix Vega10 black screen after mode change"
Verified that it hadn't cause mode change regression.
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The vce cancel_delayed_work_sync never be called.
driver call the function in error path.
This caused the A+A suspend hang when runtime pm enebled.
As we will visit the smu in the idle queue. this will cause
smu hang because the dgpu has been suspend, and the dgpu also
will be waked up. As the smu has been hang, so the dgpu resume
will failed.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This reverts commit 0c08754b59.
commit 0c08754b59
("drm/panel: Add device_link from panel device to DRM device")
creates a circular dependency under these circumstances:
1. The panel depends on dsi-host because it is MIPI-DSI child
device.
2. dsi-host depends on the drm parent device (connector->dev->dev)
this should be allowed.
3. drm parent dev (connector->dev->dev) depends on the panel
after this patch.
This makes the dependency circular and while it appears it
does not affect any in-tree drivers (they do not seem to have
dsi hosts depending on the same parent device) this does not
seem right.
As noted in a response from Andrzej Hajda, the intent is
likely to make the panel dependent on the DRM device
(connector->dev) not its parent. But we have no way of
doing that since the DRM device doesn't contain any
struct device on its own (arguably it should).
Revert this until a proper approach is figured out.
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180927124130.9102-1-linus.walleij@linaro.org
having a delayed work item per job is redundant as we only need one
per scheduler to track the time out the currently executing job.
v2: the first element of the ring mirror list is the currently
executing job so we don't need a additional variable for it
v3: squash in fixes for v3d and etnaviv
Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clang generates warnings when one enumerated type is implicitly
converted to another.
drivers/gpu/drm/amd/amdgpu/../powerplay/hwmgr/ppatomfwctrl.c:532:57:
warning: implicit conversion from enumeration type 'enum
atom_smu11_syspll0_clock_id' to different enumeration type 'BIOS_CLKID'
(aka 'enum atom_smu9_syspll0_clock_id') [-Wenum-conversion]
if (!pp_atomfwctrl_get_clk_information_by_clkid(hwmgr,
SMU11_SYSPLL0_SOCCLK_ID, &frequency))
In this case, that is expected behavior. To make that clear to Clang
without explicitly casting these values, change id's type to uint8_t
in pp_atomfwctrl_get_clk_information_by_clkid so no conversion happens.
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
