When a latent (unknown to 'badblocks') error is encountered, it will
trigger a machine check exception. On a system with machine check
recovery, this will only SIGBUS the process(es) which had the bad page
mapped (as opposed to a kernel panic on platforms without machine
check recovery features). In the former case, we want to trigger a full
rescan of that nvdimm bus. This will allow any additional, new errors
to be captured in the block devices' badblocks lists, and offending
operations on them can be trapped early, avoiding machine checks.
This is done by registering a callback function with the
x86_mce_decoder_chain and calling the new ars_rescan functionality with
the address in the mce notificatiion.
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
With the arrival of x86-machine-check support the nfit driver will add a
(conditionally-compiled) source file. Prepare for this by moving all
nfit source to drivers/acpi/nfit/. This is pure code movement, no
functional changes.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
While testing the new on-demand ARS patches we discovered that
differences between the nfit_test and normal nfit driver shutdown paths
can leak resources. Unify the shutdown paths to trigger via a devm_
callback when the acpi_desc->dev is unbound from its driver.
Reviewed-by: Lee, Chun-Yi <jlee@suse.com>
Reported-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Let the provider module be explicitly passed in rather than implicitly
assumed by the module that calls nvdimm_bus_register(). This is in
preparation for unifying the nfit and nfit_test driver teardown paths.
Reviewed-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Pass the nfit buffer as a parameter rather than hanging it off of
acpi_desc.
Reviewed-by: "Lee, Chun-Yi" <jlee@suse.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
New for ACPI 6.1, these fields are used in the common dimm
representation format defined by section 5.2.25.9 "NVDIMM representation
format".
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Test the virtual disk ranges that platform firmware like EDK2/OVMF might
emit.
Tested-by: "Lee, Chun-Yi" <jlee@suse.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
PROT_SAO is a powerpc-specific flag to mmap(), and we rely on arch
specific logic to allow it to be passed to mmap().
Add a small test to ensure mmap() accepts PROT_SAO. We don't have a good
way to test that it actually causes the mapping to be created with the
right flags, so for now we just touch the mapping so it's faulted in. In
future we might be able to do something better.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The __pmem address space was meant to annotate codepaths that touch
persistent memory and need to coordinate a call to wmb_pmem(). Now that
wmb_pmem() is gone, there is little need to keep this annotation.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Use "Delta" to refer to the difference between measurements, rather than
"Error", so scripts that look for "Error" aren't confused into thinking
there was a failure.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Test that an ISA 3.0 compliant machine performing an unaligned copy,
copy_first, paste or paste_last is sent a SIGBUS.
Signed-off-by: Chris Smart <chris@distroguy.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
These are useful little loops for smoke testing performance.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently it doesn't appear the resulting binary actually uses any
Altivec or VSX instructions the solution is to explicitly tell GCC to
use vector instructions and use vector types in the code.
Part of this this issue can be GCC version specific:
GCC 4.9.x is happy to use Altivec and VSX instructions if altivec.h is
includedi (and possibly if vector types are used), this also means that
4.9.x will use VSX instructions even if only -maltivec is passed. It is
also possible that Altivec instructions will be used even without
-maltivec or -mabi=altivec.
GCC 5.2.x complains about the lack of -maltivec parameter if altivec.h
is included and will not use VSX unless -mvsx is present on commandline.
GCC 5.3.0 has a regression that means __attribute__((__target__("no-vsx"))
fails to build. A fix is targeted for 5.4.
Furthermore LTO (Link Time Optimisation) doesn't play well with
__attribute__((__target__("no-vsx")), LTO can cause GCC to forget about
the attribute and compile with VSX instructions regardless. Be wary when
enabling -flfo for this test.
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When we inverted the behaviour of the flags we forgot to update the
usage message.
Fixes: 51c21e72eb ("selftests/powerpc: Make context_switch touch FP/altivec/vector by default")
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Excerpt from man 2 perf_event_open:
/proc/sys/kernel/perf_event_paranoid
The perf_event_paranoid file can be set to restrict access to the
performance counters.
2 allow only user-space measurements.
1 allow both kernel and user measurements (default).
0 allow access to CPU-specific data but not raw tracepoint samples.
-1 no restrictions.
require_paranoia_below() should return 0 if perf_event_paranoid is below
a specified level, the value from perf_event_paranoid is read into an
unsigned long so the incorrect value is returned when
perf_event_paranoid is set to -1.
Without this patch applied there is the same number of selftests/powerpc
which skip when /proc/sys/kernel/perf_event_paranoid is set to 1 or -1
but no skips when set to zero.
With this patch applied there are no skipped selftests/powerpc test when
/proc/sys/kernel/perf_event_paranoid is set to 0 or -1.
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Pull RCU changes from Paul E. McKenney:
- Documentation updates. Just some simple changes, no design-level
additions.
- Miscellaneous fixes.
- Torture-test updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add regression test scripts open_loop_test.sh, and bind_unbind_sample.sh.
Also add regression_test.txt that describes the regression test procedure.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
The default MEMLOCK limit is not big enough to accomodate all the
current pages of the test program process, so the test fails
at this step.
By removing the MCL_CURRENT flag, we allow the mlockall
call to succeed. The mmap is twice the size of the current limit,
so it will still fail as expected.
Signed-off-by: Yannick Brosseau <scientist@fb.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
When setting back the initial value to nr_hugepages, the
test was writing a length sizeof of the string and checking
that strlen was writen. Since those values are not the same,
use strlen in both place instead.
Also make the error messages more explicit to help in future
debugging.
Signed-off-by: Yannick Brosseau <scientist@fb.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Test for test_printf module fails always because the test program,
printf.sh, has no execution permission. This commit adds execution
permission to it.
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
DMA_CMA is incompatible with SWIOTLB used in enterprise distro
configurations. Switch to vmalloc() allocations for all resources.
Acked-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
A call to ioctl(..., RTC_IRQP_SET, ...) should never result in
ENOTTY. All new style RTC drivers implement it and all of the old style
drivers return EINVAL when they don't support periodic IRQs.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
A call to ioctl(..., RTC_IRQP_READ, ...) should never result in
ENOTTY. All new style RTC drivers implement it and all of the old style
drivers return EINVAL when they don't support periodic IRQs.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
For old style drivers, call a call to ioctl(..., RTC_ALM_SET, ...):
- char/ds1302.c will always return -EINVAL
- char/genrtc.c: will always return -EINVAL
- char/rtc.c will succeed regardless if IRQs are supported or not
- char/efirtc.c will always return -EINVAL
- input/misc/hp_sdc_rtc.c ... that ioctl code is a good lesson about
ifdefing code out and punting implementation ... and it will
always return -EINVAL
For new style rtc drivers, a call to ioctl(..., RTC_ALM_SET, ...) never
results in a call to __rtc_set_alarm, since struct rtc_wkalarm passed to
rtc_set_alarm has 'enabled' field set to 0. This means that
rtc->ops->set_alarm driver hook is never called in that ioctl. Since no
driver code interaction happens as a part of that call, using its
results to ascertain properties of the driver is not going to work. To
remedy this - use the result of RTC_AIE_ON to make the judgement.
This patch also changes ENOTTY to EINVAL as an error code value that
would tell us that IRQs are not supported. There are three reason for
this:
- As mentioned above old style driver never returns ENOTTY for this
ioctl
- In it's code __rtc_set_alarm() returns -EINVAL if rtc->ops->set_alarm
method is not provided by the driver, so one reason for change is to
be consistent with that code path.
- A call to ioctl(..., RTC_UIE_ON, ...) will result in a call to
rtc_update_irq_enable() and then __rtc_set_alarm(), which, if IRQs
are not supported by the driver, will result in a non-zero error
code. Returning ENOTTY in that case would:
a) Not be consistent with other codepaths of
rtc_update_irq_enable, for example the check of
rtc->uie_unsupported
b) Would break update IRQ emulation code since that codpath
expects EINVAL
c) Would break test's logic for feature support detection in
the case of RTC_UIE_ON ioctl
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Currently phys_to_pfn_t() is an exported symbol to allow nfit_test to
override it and indicate that nfit_test-pmem is not device-mapped. Now,
we want to enable nfit_test to operate without DMA_CMA and the pmem it
provides will no longer be physically contiguous, i.e. won't be capable
of supporting direct_access requests larger than a page. Make
pmem_direct_access() a weak symbol so that it can be replaced by the
tools/testing/nvdimm/ version, and move phys_to_pfn_t() to a static
inline now that it no longer needs to be overridden.
Acked-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Adds two tests. One is a simple test to ensure that the new registers
LMRR and LMSER are properly maintained. The other actually uses the
existing EBB test infrastructure to test that LMRR and LMSER behave as
documented.
Signed-off-by: Jack Miller <jack@codezen.org>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When histograms are not configured in the kernel, the ftracetest histogram
selftests should return "unsupported" and not "Failed". To detect this, the
test scripts have:
FEATURE=`grep hist events/sched/sched_process_fork/trigger`
if [ -z "$FEATURE" ]; then
echo "hist trigger is not supported"
exit_unsupported
fi
The problem is that '-e' is in effect and any error will cause the program
to terminate. The grep for 'hist' fails, because it is not compiled it (thus
unsupported), but because grep has an error code for failing to find the
string, it causes the program to terminate, and is marked as a failed test.
Namhyung Kim recommended to test for the "hist" file located in
events/sched/sched_process_fork/hist instead, as it is more inline with the
other checks. As the hist file is only created if the histogram feature is
enabled, that is a valid check.
Link: http://lkml.kernel.org/r/20160523151538.4ea9ce0c@gandalf.local.home
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 76929ab51f ("kselftests/ftrace: Add hist trigger testcases")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Fail building nfit_test.ko when the configuration is missing pfn device
support.
Reported-by: Megha Dey <megha.dey@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The execveat test try to exec the Makefile file and expect an EACCES
results. When running the test in the installed destination it would
fail with ENOENT since the file is not there.
Add Makefile to the TEST_FILES list so it's copied at install time.
Signed-off-by: Yannick Brosseau <scientist@fb.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This commit enables jitter by default. It may be manually disabled
by passing "--jitter 0" to kvm.sh.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Because recent testing shows that "-soundhw pcspkr" is no longer required
in the kernel boot arguments, this commit drops this qemu argument.
Reported-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The option "-soundhw pcspk" gives me a error on PPC as follow:
qemu-system-ppc64: ISA bus not available for pcspk
This means this option doesn't work on ppc by default. So simply make
this an x86-specific option via identify_qemu_args().
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The vmlinux image is available for all the architectures, and suitable
for running a KVM guest by QEMU, besides, we used to copy the vmlinux
to $resdir anyway. Therefore it makes sense to use it as the fallback
kernel image for rcutorture KVM tests.
This patch makes identify_boot_image() return vmlinux if
${TORTURE_BOOT_IMAGE} is not set on non-x86 architectures, also fixes
several places that hard-code "bzImage" as $KERNEL.
This also fixes a problem that PPC doesn't have a bzImage file as build
results.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Using dracut is another way to get an initramfs for KVM-based RCU
torture tests, which is more flexible than using the host's initramfs
image, because modules and binaries may be added or removed via dracut
command options. So add an example in the document, in case that there
are some situations where host's initramfs couldn't be used.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds a string of the form "Starves: 10" to the summary
line for error conditions found in the console output.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit avoids killing qemu if a trace dump is making progress
or if console log output is continuing and the console log timestamp
does not exceed the total plus grace period.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
One problem with seccomp was that ptrace could be used to change a
syscall after seccomp filtering had completed. This was a well documented
limitation, and it was recommended to block ptrace when defining a filter
to avoid this problem. This can be quite a limitation for containers or
other places where ptrace is desired even under seccomp filters.
This adds tests for both SECCOMP_RET_TRACE and PTRACE_SYSCALL manipulations.
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@kernel.org>
I've had this code for a while, but never submitted it upstream. Now
that Skylake hardware is out in the wild, folks can actually run this
for real. It tests the following:
1. The MPX hardware is enabled by the kernel and doing what it
is supposed to
2. The MPX management code is present and enabled in the kernel
3. MPX Signal handling
4. The MPX bounds table population code (on-demand population)
5. The MPX bounds table unmapping code (kernel-initiated freeing
when unused)
This has also caught bugs in the XSAVE code because MPX state is
saved/restored with XSAVE.
I'm submitting it now because it would have caught the recent issues
with the compat_siginfo code not being properly augmented when new
siginfo state is added.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160608172535.5B40B0EE@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This fixes the following compiler warnings when compiling the
reuseport_bpf testcase on a 32 bit platform:
reuseport_bpf.c: In function ‘attach_ebpf’:
reuseport_bpf.c:114:15: warning: cast from pointer to integer of ifferent size [-Wpointer-to-int-cast]
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
