Replace the 1ms msleep in wm_adsp2_ena with a usleep_range, as per
normal guidance on delay functions. Also tighten up the delay a little
as 1ms was quite generous.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The audio component framework code has not yet landed in the i915 driver
so drop the use of the API for the time being.
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Jeeja KP <jeeja.kp@intel.com>
The Chromebook Pixel 2015 uses this codec with the ACPI ID RT5677CE, but
does not use the standard DT property names so add a new function to
parse the codec properties from these ACPI properties.
Also, the GPIOs are only available by index, so we need to register a
mapping to allow machine drivers to access the GPIOs by name.
Signed-off-by: John Keeping <john@metanate.com>
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
With codec read sometimes the pin_sense shows invalid monitor present
and eld_valid. Currently driver polls for few times to get the valid
ELD data.
To avoid the latency, Instead of reading ELD from codec, read it
directly from the display driver using audio component framework.
Removed the direct codec helper functions.
Signed-off-by: Sandeep Tayal <sandeepx.tayal@intel.com>
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Trival fix, some dev_err and deb_dbg messages are missing a \n, so
add it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the DSP loading is split into two widgets, the preloader that
is a snd_soc_dapm_dai_link widget which starts a thread to download
the firmware, and the DSP itself which is a snd_soc_dapm_out_drv and
synchronises the thread back in to the DAPM sequence. This allows the
firmware download to be overlapped with the rest of the path bring up.
The use of a snd_soc_dapm_dai_link widget requires the preloader to be part
of the audio path in DAPM, really a supply widget is a better fit for the
preloader. The preloader is something that needs to be done for the DSP to
function, not a part of the audio path itself.
This change makes the DSP preloader widget a supply widget, which as well
as probably being a better fit will also make it much simpler to power up
the preloader widget to trigger firmware download to the core independently
of the audio path coming up.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently SYSCLK is attached to every compressed DAI as this follows the
pattern of attaching clocks to the chips inputs and outputs, however, it is
really the DSP that requires the clock here. As firmware download can be a
significant part of the path startup time for these devices occasionally it
would be desirable to download the firmware in advance of the path being
brought up.
To help facilitate this early firmware loading this patch attaches the
SYSCLK to the DSP preloader widget. This also saves us adding a new route
to SYSCLK every time a new compressed DAI is created.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of the work to download firmware before the audio path is brought
up the DSP will be put into a low power state between downloading firmware
to the core and starting it running. This will mean that the firmware ALSA
controls are not accessible in the hardware during this period of time.
To prepare for this change we gate access to the hardware in the ALSA
control handlers on the DSP being running rather than simply booted and
move the synchronisation of the control caches out of the preloader delayed
work and into the main DAPM thread after the DSP will have been brought out
of its low power state.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the wm_adsp driver has a flag that indicates the DSP is
"running", this flag is used to gate access to the hardware. However this
flag is actually set in the firmware download thread after the firmware has
been downloaded, but this is before the core is actually started running,
so really it currently indicates that the core has been booted and is
perhaps running.
This patch clearly separates out the concepts of booted (firmware is
downloaded) and running (code is executing on the DSP) within the wm_adsp
driver.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
After moving tpa6130a2 power management to DAPM, if chip can be physically
powered off (either reset_gpio is defined, or regulator indeed removes
power), then volume change no longer works unless chip is on due to
a running stream.
Fix that by entering regcache cache_only mode while chip is off.
Move regcache calls to tpa6130a2_power() to get them at driver init time
as well.
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
DP MST provides the capability to send multiple video and audio streams
through a single port. This requires the API's between i915 and audio
drivers to distinguish between multiple audio capable displays that can be
connected to a port. Currently only the port identity is shared in the
APIs. This patch adds support for MST with an additional parameter
'int pipe'. The existing parameter 'port' does not change it's meaning.
pipe =
MST : display pipe that the stream originates from
Non-MST : -1
Affected APIs:
struct i915_audio_component_ops
- int (*sync_audio_rate)(struct device *, int port, int rate);
+ int (*sync_audio_rate)(struct device *, int port, int pipe,
+ int rate);
- int (*get_eld)(struct device *, int port, bool *enabled,
- unsigned char *buf, int max_bytes);
+ int (*get_eld)(struct device *, int port, int pipe,
+ bool *enabled, unsigned char *buf, int max_bytes);
struct i915_audio_component_audio_ops
- void (*pin_eld_notify)(void *audio_ptr, int port);
+ void (*pin_eld_notify)(void *audio_ptr, int port, int pipe);
This patch makes dummy changes in the audio drivers (thanks Libin) for
build to succeed. The audio side drivers will send the right 'pipe' values
for MST in patches that will follow.
v2:
Renamed the new API parameter from 'dev_id' to 'pipe'. (Jim, Ville)
Included Asoc driver API compatibility changes from Jeeja.
Added WARN_ON() for invalid pipe in get_saved_encoder(). (Takashi)
Added comment for av_enc_map[] definition. (Takashi)
v3:
Fixed logic error introduced while renaming 'dev_id' as 'pipe' (Ville)
Renamed get_saved_encoder() to get_saved_enc() to reduce line length
v4:
Rebased.
Parameter check for pipe < -1 values in get_saved_enc() (Ville)
Switched to for_each_pipe() in get_saved_enc() (Ville)
Renamed 'pipe' to 'dev_id' in audio side code (Takashi)
v5:
Included a comment for the dev_id arg. (Libin)
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1474488168-2343-1-git-send-email-dhinakaran.pandiyan@intel.com
A cleanup removed a couple of members from struct snd_soc_codec_driver
after changing codec drivers to no longer use them, but one codec
was missed in the process, giving a build error:
sound/soc/codecs/cq93vc.c:134:2: error: unknown field 'controls' specified in initializer
.controls = cq93vc_snd_controls,
This moves the members from the cq93vc codec driver to its component driver
just like the other codecs already had.
Fixes: 8073aefa60 ("ASoC: remove codec duplicated callback function")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/codecs/rt5663.c:3203:3-8: No need to set .owner here. The core will do it.
Remove .owner field if calls are used which set it automatically
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Acked-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Fixes the following sparse warnings:
sound/soc/codecs/rt5663.c:1367:14: warning: duplicate const
sound/soc/codecs/rt5663.c:1577:5: warning:
symbol 'rt5663_button_detect' was not declared. Should it be static?
sound/soc/codecs/rt5663.c:2857:24: warning:
symbol 'rt5663_aif_dai_ops' was not declared. Should it be static?
sound/soc/codecs/rt5663.c:2866:27: warning:
symbol 'rt5663_dai' was not declared. Should it be static?
sound/soc/codecs/rt5663.c:3193:6: warning:
symbol 'rt5663_i2c_shutdown' was not declared. Should it be static?
sound/soc/codecs/rt5663.c:3200:19: warning:
symbol 'rt5663_i2c_driver' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The newly added rt5663 codec driver introduces a couple of warnings
when built with -Wmaybe-uninitialized:
codecs/rt5663.c: In function 'rt5663_set_tdm_slot':
codecs/rt5663.c:2680:2: error: 'reg' may be used uninitialized in this function [-Werror=maybe-uninitialized]
codecs/rt5663.c: In function 'rt5663_set_dai_pll':
codecs/rt5663.c:2556:12: error: 'shift' may be used uninitialized in this function [-Werror=maybe-uninitialized]
codecs/rt5663.c:2596:2: error: 'mask' may be used uninitialized in this function [-Werror=maybe-uninitialized]
We can avoid those warnings by always returning an error
from the switch() statements instead of falling through
with an uninitialized variable when we hit an unexpected
case.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: df7c52168e ("ASoC: add rt5663 codec driver")
Signed-off-by: Mark Brown <broonie@kernel.org>
For best performance changing the synchroniser state whilst the FLL is
running should be avoided. As this has been done fairly regularly in
practice rather than hard preventing this, simply improve the FLL enable
sequence and give a warning if the user changes the synchroniser state.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: Fixes for v4.8
A clutch of fixes for v4.8. These are mainly driver specific, the most
notable ones being those for OMAP which fix a series of issues that
broke boot on some platforms there when deferred probe kicked in.
There's also one core fix for an issue when unbinding a card which for
some reason had managed to not manifest until recently.
In preparation for future improvements allow a base to be passed to
arizona_is_enabled_fll, this will allow it to be used to check the state
of the synchroniser path as well.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
According to the datasheets of Realtek ALC5658 (Rev. 0.9)
and ALC5659 (Rev. 0.13), the "IRQ Control 4" register is
located at MX-00BAh while the "IRQ control 5" register is
at MX-00BBh.
There is no "IRQ Control 6" register in the datasheets but
it is supposed to be behind the "IRQ Control 5" register.
So this patch corrects these addresses.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The workqueue "dac33_wq" queues a single work item &dac33->work and
hence doesn't require ordering. Also, it is not being used on a memory
reclaim path. Hence, it has been converted to use system_wq.
System workqueues have been able to handle high level of concurrency
for a long time now and hence it's not required to have a singlethreaded
workqueue just to gain concurrency. Unlike a dedicated per-cpu workqueue
created with create_singlethread_workqueue(), system_wq allows multiple
work items to overlap executions even on the same CPU; however, a
per-cpu workqueue doesn't have any CPU locality or global ordering
guarantee unless the target CPU is explicitly specified and thus the
increase of local concurrency shouldn't make any difference.
The work item has been flushed in dac33_soc_remove to ensure that
there are no pending tasks while disconnecting the driver.
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the driver code assumes that MCLK will be present during
the procedure, or if it has control of MCLK then it can make sure
it's enabled. Some platforms however do not provide MCLK to the
driver in this way, and will not leave MCLK enabled when Codec is
in STANDBY state.
This patch adds support for the HP detect procedure when running
from the device's internal oscillator, to ensure all platforms
can make use of this feature correctly.
Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
In the FLL parameter calculation, the FVCO should choose the maximum one.
The patch is to fix the bug about the wrong FVCO chosen.
Signed-off-by: John Hsu <KCHSU0@nuvoton.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Da7219 does not trigger interrupt to report jack status
when system boots from warm reset because its power
remains on during warm reset.
Doing software reset at probe to handle this.
Signed-off-by: Hsin-Yu Chao <hychao@chromium.org>
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
These structures are only used to copy into other structures, so declare
them as const.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct gpio_chip i@p = { ... };
@ok@
identifier r.i;
expression e;
position p;
@@
e = i@p;
@bad@
position p != {r.p,ok.p};
identifier r.i;
struct gpio_chip e;
@@
e@i@p
@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
struct gpio_chip i = { ... };
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
Check for snd_pcm_ops structures that are only stored in the ops field of a
snd_soc_platform_driver structure or passed as the third argument to
snd_pcm_set_ops. The corresponding field or parameter is declared const,
so snd_pcm_ops structures that have this property can be declared as const
also.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct snd_pcm_ops i@p = { ... };
@ok1@
identifier r.i;
struct snd_soc_platform_driver e;
position p;
@@
e.ops = &i@p;
@ok2@
identifier r.i;
expression e1, e2;
position p;
@@
snd_pcm_set_ops(e1, e2, &i@p)
@bad@
position p != {r.p,ok1.p,ok2.p};
identifier r.i;
struct snd_pcm_ops e;
@@
e@i@p
@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
struct snd_pcm_ops i = { ... };
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
The volume have a step of 0.375dB, but TLV uses the units 0.01dB. It should
be changed to a step of 0.75dB to match the units of TLV.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Theta/lambda is used to give the fractional portion of the FLL
frequency multiplication. When the synchroniser is active the
reference path lambda value is hard coded in the hardware to
65536. This patch corrects the handling of theta such that it
is scaled to match this denominator, when the synchroniser is
active.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
When enabling an FLL use pm_runtime_get_sync() instead of
pm_runtime_get() to ensure that all the register settings
have been written out and the codec is powered-up before
we write the enable bit.
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Since it's possible to have an IRQ without enabling JD3, the
GPIO1 pin then would remain its default GPIO function which
is set as an input direction (seeing from rt5659). Meanwhile,
CPU would also listen this connection via its own GPIO input:
[input] [input]
CPU GPIO <--------> RT5659 GPIO1
The result for the IRQ on the CPU side will be unexpectable.
So this patch enables the IRQ output for GPIO1 pin any way
as long as there's an IRQ assigned from platform data or DT:
[input] [IRQ output]
CPU GPIO <--------< RT5659 GPIO1
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Check for snd_soc_codec_driver structures that are only passed to
snd_soc_register_codec or memcpy (2nd arg), for which the corresponding
parameters are declared const. Declare as const snd_soc_codec_driver
structures that have these properties.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct snd_soc_codec_driver i@p = { ... };
@ok@
identifier r.i;
expression e1,e2,e3;
position p;
@@
(
snd_soc_register_codec(e1,&i@p,e2,e3)
|
memcpy(e1,&i@p,e2)
)
@bad@
position p != {r.p,ok.p};
identifier r.i;
@@
i@p
@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
struct snd_soc_codec_driver i = { ... };
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
These controls mute/unmute the LINEOUT and headphone outputs of SGTL5000
using its CHIP_ANA_CTRL register.
Signed-off-by: Richard Leitner <dev@g0hl1n.net>
Signed-off-by: Mark Brown <broonie@kernel.org>
Thank Stephen Rothwell for the message.
The patch is to fix the following compile error.
sound/soc/codecs/nau8810.c:441:3: error: initialization from incompatible
pointer type [-Werror=incompatible-pointer-types]
SND_SOC_DAPM_SWITCH("Digital Loopback", SND_SOC_NOPM, 0, 0,
&nau8810_loopback),
^
sound/soc/codecs/nau8810.c:441:3: note: (near initialization for
'nau8810_dapm_widgets[11].kcontrol_news')
Signed-off-by: John Hsu <KCHSU0@nuvoton.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver is for codec NAU88C10 of Nuvoton Technology Corporation.
Signed-off-by: John Hsu <KCHSU0@nuvoton.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The field "owner" is set by the core.
Thus delete an unneeded initialisation.
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding missing definitions and flags to select internal
clock source as system clock, needed for jack detection.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The two clock domains are enabled based on each input and output of the
chip being connected to its respective clock domain. The ASRC however
can bridge the two domains and as such can function as an input/output
to either domain. The hardware also requires that both clocks are
enabled before the ASRC is. Ensure these constraints by linking the
ASRCs to both SYSCLK and ASYNCCLK.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Anything that sets ret in wm2000_anc_transition will have immediately
returned anyway as such we will always return an uninitialised ret at the
bottom of the function. Simply replace the return with a return 0;
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently MCLK remains enabled during bias STANDBY state, and this
is not necessary. This patch updates the code to handle enabling
and disabling of MCLK, if provided, when moving between STANDBY
and PREPARE states, therefore saving power when no active streams
present.
Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Functionality has been removed in latest silicon variants. This
patch removes the feature from the driver to align.
Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
