"Biquad1 Mode" and "Biquad2 Mode" ctls in max98095 codec driver are
enum, while the current driver accesses wrongly via
value.integer.value[]. They have to be via value.enumerated.item[]
instead.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
"EQ1 Mode" and "EQ2 Mode" ctls in max98088 codec driver are enum,
while the current driver accesses wrongly via value.integer.value[].
They have to be via value.enumerated.item[] instead.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
"Sidetone Status" and "ANC Status" ctls in ab8500 codec driver are
enum, while the current driver accesses wrongly via
value.integer.value[]. They have to be via value.enumerated.item[]
instead.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
"DAC1 High Pass Filter Mode" & co in da732x codec driver are enum,
while the current driver accesses wrongly via value.integer.value[].
They have to be via value.enumerated.item[] instead.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
"PCM channel mixer" ctl in cs42l51 codec driver is enum, while the
current driver accesses wrongly via value.integer.value[]. They have
to be via value.enumerated.item[] instead.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
The cs4271 has three power domains: vd, vl and va.
Enable them all, as long as the codec is in use.
While at it, factored out the reset code into its own function.
Signed-off-by: Pascal Huerst <pascal.huerst@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Headphone needs enough delay time before unmuting for avoiding pop sound.
We extend the delay time to make sure headphone doesn't pop.
Signed-off-by: John Lin <john.lin@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
When playing audio through headphone, headphone makes pop noise if system
resumes from S3 to S0. We modify the sequence of writing register for
avoiding pop sound.
Signed-off-by: John Lin <john.lin@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Smatch complains that we might reach the end of this loop without
finding what we're looking for leading to a buffer overflow.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The IRQ function should not be enabled before irq handler is registered.
In fact, it is done in rt298_probe. So remove it from rt298_i2c_probe.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
There are some registers needed for enabling rt298 IRQ missed on
current driver.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The debug logging of FLL calculations was confusing. Values were
printed in hex without indicating this by a leading 0x, and
despite these normally being required in decimal. Also where the
register value isn't the actual value (it s a power-of-two or
0 means 1, 1 means 2, ...) it was unclear whether the actual or
register value was shown.
This patch changes the log print so that all mathematical values
are shown in decimal, all register values are shown in hex with a
0x prefix, and where the register value isn't the actual integer
value the decimal integer value is shown in () after the hex
register value.
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
value variable can contain error values and is compared with zero.
Its type must be signed.
The problem has been detected using coccinelle script
scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
In the conversion to regmap, I assumed that the devm_() variant could be
used in the soc probe function.
As a mater of fact with the current code the regmap is freed twice
because of the devm_() call:
(mutex_lock) from [<c01f6624>] (debugfs_remove_recursive+0x50/0x1d0)
(debugfs_remove_recursive) from [<c02bf800>] (regmap_debugfs_exit+0x1c/0xd4)
(regmap_debugfs_exit) from [<c02ba1f8>] (regmap_exit+0x28/0xc8)
(regmap_exit) from [<c02aa258>] (release_nodes+0x18c/0x204)
(release_nodes) from [<c02a278c>] (device_release+0x18/0x90)
(device_release) from [<c0239030>] (kobject_release+0x90/0x1bc)
(kobject_release) from [<c0395c94>] (wm9713_soc_remove+0x1c/0x24)
(wm9713_soc_remove) from [<c0384884>] (soc_remove_component+0x50/0x7c)
(soc_remove_component) from [<c0386c28>] (soc_remove_dai_links+0x118/0x228)
(soc_remove_dai_links) from [<c038721c>] (snd_soc_register_card+0x4e4/0xdd4)
(snd_soc_register_card) from [<c0393c54>] (devm_snd_soc_register_card+0x34/0x70)
Fix this by replacing the devm_regmap initialization code with the non
devm_() variant.
Fixes: 700dadfefc ASoC: wm9713: convert to regmap
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The codec registers are reset during S3. So need to reconfigure
all pins and DP1.2 feature again after resume from S3. Also
reprogram the required registers if the S3 was triggered during
playback.
In suspended state ELD notify callback is not processed, So add
ELD check for all pins as well.
Also turn the codec power domain OFF which is kept ON during
controller resequencing and codec reenumeration.
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Powering off codec immediately after sending D3 verb may not set
the node to D3 state. So wait for a confirmation response before
shutting down codec.
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
wm_coeff_{read|write}_control were using the control length rather than
the length parameter passed to them. This is not causing any issues as
the two values are currently always the same, but this needs fixed to
allow future improvements.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
In the case where the firmware does not tell us the access flags for the
control, we let ALSA select a default (READWRITE). But really we should
be applying the volatile flag in this case, as we will read the control
from the DSP if it is on in this case. This patch explicitly sets the
access flags in all cases.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a very small window between then wm_adsp_compr_free gets call
and when the DSP is actually powered down. If we get an IRQ from the DSP
in this window then the wm_adsp_compr pointer will be NULL. This patch
adds a check for this into the IRQ handler to avoid any issues when this
happens.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The register are reset during the D3 to D0 transition. So
reconfigure them.
Also as all DAIs are now supported, remove the dai id check in prepare.
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The codec power is turned OFF in the first explicit call to
pm_runtime_suspend to keep the i915 refcount balanced. During regular
operation, the power is turned ON/OFF in runtime PM handlers.
Signed-off-by: Ramesh Babu <ramesh.babu@intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
In dai startup, driver was checking for ELD and would fail if no
monitor is connected. This causes userland like PA, CRAS to be
unhappy as they scan the device list at bootup.
So move the ELD check to hw_params and fail if valid ELD is not
found.
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 4a3478debf ("ASoC: hdac_hdmi: Add jack reporting")
leads to the following Smatch complaint:
sound/soc/codecs/hdac_hdmi.c:971 hdac_hdmi_present_sense()
warn: variable dereferenced before check 'edev' (see line 967)
As explained by Subhransu S. Prusty:
"This NULL check is not required, can be removed.
edev object is expected to be present when the present_sense is
called. This is called from places where this edev object is
already available."
So remove the evdev NULL check.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
For DP audio support, infoframe needs to be different. Based on
get_conn_type result we pack either HDMI or DP infoframe.
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Last patch added infrastructure to render over all the ports,
PCM<->cvt<- pin mapping and user selection of controls. But we
still have restriction of playback on the default port alone, so
remove that.
This patch removes the hardcoding of cvt<->pin map from the dai.
Cvt and pin for a dai are now derived from the already stored pcm
list of device opened. We query connection list of a pin from
codec to validate the cvt<->pin map.
If connection list returns zero, then monitor is not connected so
fail playback.
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Jack is created based on pcm devices enumerated, so we will
create Jack as "HDMI/DP, pcm=x Jack". This style is expected by
current usermode like PulseAudio and CRAS.
This patch exports an API which can be used to register Jack
based on PCM. This API also establishes the map between PCM and
cvt. Further cvt to pin mapping is established with the help of
usermode selection based on the board topology.
During device probe as the PCMs may not be registered, initial
pin sense don't report jack events. So, first time jack reporting
is done during user selection of mux control.
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
In skylake, HDMI codec enumerates 3 pins and 3 cvts. Stream can
be routed from any cvt to any pin based on the connection list
queried from the pin.
This patch removes the static modelling of widget/route and
creates it dynamically based on the codec widgets enumerated.
Mux widgets are added to represent the map between a cvt and pin.
Ideally the mux widgets should be created based on the connection
list queried from the pin widget. But due to HW behavior, if an
external display is not connected on a port, querying the
connection list returns zero. So create mux widgets to map all
the cvt to all pins. At runtime, playback support on a pin can be
verified based on the connection list query.
Few function in driver have additional arguments now to support
this.
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
After enabling all pins/cvts, Skylake HDMI codec enumerates 3
converters. Three independent streams can be supported with 3
cvts. This patch removes the static dai creation and creates dais
based on the number of cvts queried.
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Skylake supports 3 pin and 3 converter widgets. But by default
only one converter and pin widget are enabled. In skylake
platform the DP port is on a different port which is not enabled
by default. To enable playback on DP port, enable all pin and
converter widget by sending a vendor VERB for a vendor widget to
set required bits.
As we are enabling the DP support enable the DP1.2 feature as well.
Enabling DP1.2 and all widget changes are copied from patch_hdmi.c.
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Uses the drm ELD core framework to apply rate and channel
Also compute the format to be set based on ELD.
Even though the channel constraint is based on ELD, infoframe
is set with stereo only. Multichannel support will be added
later.
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch uses i915 component framework to register for hotplug
notification.
In the hotplug notification, driver reads pin sense and ELD by
sending PIN_SENSE and ELD verbs over HDA bus. Once it identifies
valid pin sense and valid ELD, store the ELD into the
corresponding pin map buffer.
Also read the monitor present sense during resume and ignore the
ELD notify from graphics during PM as is done in legacy hda,
commit 8ae743e82f ("ALSA: hda - Skip ELD notification during
system suspend")
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
When the FLL is in pseudo-fractional mode there is an additional
limit on fref based on the fratio, to prevent aliasing around the
Nyquist frequency. If fref exceeds this limit the refclk divider
must be increased and the calculation tried again until a suitable
combination of fref and fratio is found or we have to fall back to
integer mode.
This patch also adds some debug log prints around this code.
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
