I've broken this by removing the backoff handling from the
set_config2atomic helper in
commit 38b6441e4e
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Wed Mar 22 22:50:58 2017 +0100
drm/atomic-helper: Remove the backoff hack from set_config
Fixing this properly would mean we get to wire the acquire_ctx all the
way through vmwgfx fbdev code, and doing the same was tricky for the
shared fbdev layer. Probably much better to look into refactoring the
entire code to use the helpers, but since that's not a viable
long-term solution fix the issue by open-coding a vmwgfx version of
set_config, that does the legacy backoff dance internally.
Note: Just compile-tested. The idea is to take
drm_mode_set_config_internal(), remove the "is this a legacy driver"
check, and whack the drm_atomic_legacy_backoff trickery at the end.
Since drm_atomic_legacy_backoff is for atomic commits only we need to
open-code it.
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170406200256.26040-1-daniel.vetter@ffwll.ch
We're trying to access vop registers here, so need to make sure
the pm domain is on.
Normally it should be enabled by the bootloader, but there's no
guarantee of it. And if we wanna do unbind/bind, it would also
cause the device to hang.
And this patch also does these:
1/ move vop_initial to the end of vop_bind for eaiser error handling.
2/ correct the err_put_pm_runtime of vop_enable.
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1491481885-13775-8-git-send-email-jeffy.chen@rock-chips.com
At dot clocks > approx. 250 Mhz, some of these calcs will overflow and
cause miscalculation of latency watermarks, and for some overflows also
divide-by-zero driver crash ("divide error: 0000 [#1] PREEMPT SMP" in
"dce_v10_0_latency_watermark+0x12d/0x190").
This zero-divide happened, e.g., on AMD Tonga Pro under DCE-10,
on a Displayport panel when trying to set a video mode of 2560x1440
at 165 Hz vrefresh with a dot clock of 635.540 Mhz.
Refine calculations to avoid the overflows.
Tested for DCE-10 with R9 380 Tonga + ASUS ROG PG279 panel.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Avoid big roundoff errors in scanline/hactive durations for
high pixel clocks, especially for >= 500 Mhz, and thereby
program more accurate display fifo watermarks.
Implemented here for DCE 6,8,10,11.
Successfully tested on DCE 10 with AMD R9 380 Tonga.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The RV3xx settings were getting applied to all older asics
rather than just RV3xx.
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
BOs shared via dma-buf, either imported or exported, cannot sensibly be migrated to VRAM
without breaking the dma-buf sharing. Refuse userspace requests to migrate to VRAM,
ensure such BOs are not migrated during command submission, and refuse to pin them
to VRAM.
v2: Don't pin BOs in GTT. Instead, refuse to migrate BOs to VRAM.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christopher James Halse Rogers <christopher.halse.rogers@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Migration to VRAM will break the sharing, resulting in rendering on the exporting GPU never becoming
visible on the importing GPU.
v2: Don't pin BOs to GTT. Instead, refuse to migrate them out of GTT.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christopher James Halse Rogers <christopher.halse.rogers@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch add support for the Mediatek MT2701 DISP subsystem.
There is only one OVL engine in MT2701.
Signed-off-by: YT Shen <yt.shen@mediatek.com>
Acked-by: CK Hu <ck.hu@mediatek.com>
This patch update enable/disable flow of DSI module.
Original flow works on there is a bridge chip: DSI -> bridge -> panel.
In this case: DSI -> panel, the DSI sub driver flow should be updated.
We need to initialize DSI first so that we can send commands to panel.
Signed-off-by: shaoming chen <shaoming.chen@mediatek.com>
Signed-off-by: YT Shen <yt.shen@mediatek.com>
Acked-by: CK Hu <ck.hu@mediatek.com>
This patch will update dsi clock control method.
1. dsi non-continue clock mode will enhance antistatic effect for panel
2. EOT packet control will judge whether dsi send end of packet or not
by customize
Signed-off-by: shaoming chen <shaoming.chen@mediatek.com>
Signed-off-by: YT Shen <yt.shen@mediatek.com>
Acked-by: CK Hu <ck.hu@mediatek.com>
We need to acquire mutex before using the resources,
and need to release it after finished.
So we don't need to write registers in the blanking period.
Signed-off-by: YT Shen <yt.shen@mediatek.com>
Acked-by: CK Hu <ck.hu@mediatek.com>
There are some hardware settings changed, between MT8173 & MT2701:
DISP_OVL address offset changed, color format definition changed.
DISP_RDMA fifo size changed.
DISP_COLOR offset changed.
MIPI_TX pll setting changed.
And add prefix for mtk_ddp_main & mtk_ddp_ext & mutex_mod.
Signed-off-by: YT Shen <yt.shen@mediatek.com>
Acked-by: CK Hu <ck.hu@mediatek.com>
define helpers for converting from 'mtk_ddp_comp' to 'mtk_disp_ovl'
define helpers for converting from 'mtk_ddp_comp' to 'mtk_disp_rdma'
Signed-off-by: YT Shen <yt.shen@mediatek.com>
Acked-by: CK Hu <ck.hu@mediatek.com>
Only call synchronize_rcu_expedited after unlocking struct_mutex to
avoid deadlock because the workqueues depend on struct_mutex.
>From original patch by Andrea:
synchronize_rcu/synchronize_sched/synchronize_rcu_expedited() will
hang until its own workqueues are run. The i915 gem workqueues will
wait on the struct_mutex to be released. So we cannot wait for a
quiescent state using those rcu primitives while holding the
struct_mutex or it creates a circular lock dependency resulting in
kernel hangs (which is reproducible but goes undetected by lockdep).
kswapd0 D 0 700 2 0x00000000
Call Trace:
? __schedule+0x1a5/0x660
? schedule+0x36/0x80
? _synchronize_rcu_expedited.constprop.65+0x2ef/0x300
? wake_up_bit+0x20/0x20
? rcu_stall_kick_kthreads.part.54+0xc0/0xc0
? rcu_exp_wait_wake+0x530/0x530
? i915_gem_shrink+0x34b/0x4b0
? i915_gem_shrinker_scan+0x7c/0x90
? i915_gem_shrinker_scan+0x7c/0x90
? shrink_slab.part.61.constprop.72+0x1c1/0x3a0
? shrink_zone+0x154/0x160
? kswapd+0x40a/0x720
? kthread+0xf4/0x130
? try_to_free_pages+0x450/0x450
? kthread_create_on_node+0x40/0x40
? ret_from_fork+0x23/0x30
plasmashell D 0 4657 4614 0x00000000
Call Trace:
? __schedule+0x1a5/0x660
? schedule+0x36/0x80
? schedule_preempt_disabled+0xe/0x10
? __mutex_lock.isra.4+0x1c9/0x790
? i915_gem_close_object+0x26/0xc0
? i915_gem_close_object+0x26/0xc0
? drm_gem_object_release_handle+0x48/0x90
? drm_gem_handle_delete+0x50/0x80
? drm_ioctl+0x1fa/0x420
? drm_gem_handle_create+0x40/0x40
? pipe_write+0x391/0x410
? __vfs_write+0xc6/0x120
? do_vfs_ioctl+0x8b/0x5d0
? SyS_ioctl+0x3b/0x70
? entry_SYSCALL_64_fastpath+0x13/0x94
kworker/0:0 D 0 29186 2 0x00000000
Workqueue: events __i915_gem_free_work
Call Trace:
? __schedule+0x1a5/0x660
? schedule+0x36/0x80
? schedule_preempt_disabled+0xe/0x10
? __mutex_lock.isra.4+0x1c9/0x790
? del_timer_sync+0x44/0x50
? update_curr+0x57/0x110
? __i915_gem_free_objects+0x31/0x300
? __i915_gem_free_objects+0x31/0x300
? __i915_gem_free_work+0x2d/0x40
? process_one_work+0x13a/0x3b0
? worker_thread+0x4a/0x460
? kthread+0xf4/0x130
? process_one_work+0x3b0/0x3b0
? kthread_create_on_node+0x40/0x40
? ret_from_fork+0x23/0x30
Fixes: 3d3d18f086 ("drm/i915: Avoid rcu_barrier() from reclaim paths (shrinker)")
Reported-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
When we retire the last request on the ring, before we ever access that
ring again we know it will be completely idle and so we can advance the
ring->head fully to the end (i.e. ring->tail) and not just to the start
of the breadcrumb. This allows us to skip re-emitting the breadcrumb
after resetting the GPU if the ring was entirely idle. This prevents us
from overwriting a seqno wraparound by re-executing a stale breadcrumb,
i.e.
submit_request(1)
intel_engine_init_global_seqno(0)
i915_reset()
would then leave 1 in the HWS, but the next request to execute would
also be with seqno 1. The sanity checks upon submission detect this as a
timewarp and explode. By setting the ring as empty, upon reset the HWS
is left as 0, leaving it consistent with the timeline.
v2: Fix check for deleting last element of list. We know that this
request is always the first element of the ring, so only if next
points back to the start will this be the only request in flight.
v3: Remove opencoding of list_is_last()
v4: Move the block to its own function for some clarity.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100144
Testcase: igt/gem_exec_whisper/hang-*
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170406170028.26871-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The plat_data->input_bus_format and plat_data->input_bus_encoding
are unsigned long and are always >=0, but the value 0 was still
considered as RGB888 for input_bus_format and default color space
for input_bus_encoding in the reworked code.
This patch changes the if statement check for a non-zero value to
either use the default input bus_format and/or bus_encoding for a zero
value and the provided bus_format and/or bus_encoding for a
non zero value.
Thanks to Dan Carpenter for his bug report at [1].
Tested on Amlogic P230 (with CSC enabled for YUV444 to RGB) and Rockchip
RK3288 ACT8846 EVB Board (no CSC involved, direct RGB passthrough).
[1] http://lkml.kernel.org/r/20170406052120.GA26578@mwanda
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: def23aa7e9 ("drm: bridge: dw-hdmi: Switch to V4L bus format and encodings")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
[narmstrong@baylibre.com: reworded commit message and added Fixes tag]
Link: http://patchwork.freedesktop.org/patch/msgid/1491471244-24989-1-git-send-email-narmstrong@baylibre.com
This adds support for the Winstar Display Co. WF35LTIACD 3.5" QVGA TFT
LCD panel, which can be supported by the simple panel driver.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Sitronix ST7789v controller is used to drive 240x320 LCD panels through
various interfaces, including SPI and RGB/Parallel.
The current driver is configuring it for the latter. Support for tinyDRM
can always be added later.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
