717f23122d2c76e0eae923a296df3777a1f2b873
212 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Greg Kroah-Hartman
|
4922049993 |
Merge 5.10.163 into android12-5.10-lts
Changes in 5.10.163
usb: musb: remove extra check in musb_gadget_vbus_draw
arm64: dts: qcom: ipq6018-cp01-c1: use BLSPI1 pins
arm64: dts: qcom: msm8996: fix GPU OPP table
ARM: dts: qcom: apq8064: fix coresight compatible
arm64: dts: qcom: sdm630: fix UART1 pin bias
arm64: dts: qcom: sdm845-cheza: fix AP suspend pin bias
arm64: dts: qcom: msm8916: Drop MSS fallback compatible
objtool, kcsan: Add volatile read/write instrumentation to whitelist
ARM: dts: stm32: Drop stm32mp15xc.dtsi from Avenger96
ARM: dts: stm32: Fix AV96 WLAN regulator gpio property
drivers: soc: ti: knav_qmss_queue: Mark knav_acc_firmwares as static
soc: qcom: llcc: make irq truly optional
soc: qcom: apr: make code more reuseable
soc: qcom: apr: Add check for idr_alloc and of_property_read_string_index
arm: dts: spear600: Fix clcd interrupt
soc: ti: knav_qmss_queue: Use pm_runtime_resume_and_get instead of pm_runtime_get_sync
soc: ti: knav_qmss_queue: Fix PM disable depth imbalance in knav_queue_probe
soc: ti: smartreflex: Fix PM disable depth imbalance in omap_sr_probe
perf: arm_dsu: Fix hotplug callback leak in dsu_pmu_init()
perf/smmuv3: Fix hotplug callback leak in arm_smmu_pmu_init()
arm64: dts: ti: k3-am65-main: Drop dma-coherent in crypto node
arm64: dts: ti: k3-j721e-main: Drop dma-coherent in crypto node
arm64: dts: mt2712e: Fix unit_address_vs_reg warning for oscillators
arm64: dts: mt2712e: Fix unit address for pinctrl node
arm64: dts: mt2712-evb: Fix vproc fixed regulators unit names
arm64: dts: mt2712-evb: Fix usb vbus regulators unit names
arm64: dts: mediatek: pumpkin-common: Fix devicetree warnings
arm64: dts: mediatek: mt6797: Fix 26M oscillator unit name
ARM: dts: dove: Fix assigned-addresses for every PCIe Root Port
ARM: dts: armada-370: Fix assigned-addresses for every PCIe Root Port
ARM: dts: armada-xp: Fix assigned-addresses for every PCIe Root Port
ARM: dts: armada-375: Fix assigned-addresses for every PCIe Root Port
ARM: dts: armada-38x: Fix assigned-addresses for every PCIe Root Port
ARM: dts: armada-39x: Fix assigned-addresses for every PCIe Root Port
ARM: dts: turris-omnia: Add ethernet aliases
ARM: dts: turris-omnia: Add switch port 6 node
arm64: dts: armada-3720-turris-mox: Add missing interrupt for RTC
pstore/ram: Fix error return code in ramoops_probe()
ARM: mmp: fix timer_read delay
pstore: Avoid kcore oops by vmap()ing with VM_IOREMAP
tpm/tpm_ftpm_tee: Fix error handling in ftpm_mod_init()
tpm/tpm_crb: Fix error message in __crb_relinquish_locality()
sched/fair: Cleanup task_util and capacity type
sched/uclamp: Fix relationship between uclamp and migration margin
cpuidle: dt: Return the correct numbers of parsed idle states
alpha: fix syscall entry in !AUDUT_SYSCALL case
PM: hibernate: Fix mistake in kerneldoc comment
fs: don't audit the capability check in simple_xattr_list()
cpufreq: qcom-hw: Fix memory leak in qcom_cpufreq_hw_read_lut()
selftests/ftrace: event_triggers: wait longer for test_event_enable
perf: Fix possible memleak in pmu_dev_alloc()
lib/debugobjects: fix stat count and optimize debug_objects_mem_init
platform/x86: huawei-wmi: fix return value calculation
timerqueue: Use rb_entry_safe() in timerqueue_getnext()
proc: fixup uptime selftest
lib/fonts: fix undefined behavior in bit shift for get_default_font
ocfs2: fix memory leak in ocfs2_stack_glue_init()
MIPS: vpe-mt: fix possible memory leak while module exiting
MIPS: vpe-cmp: fix possible memory leak while module exiting
selftests/efivarfs: Add checking of the test return value
PNP: fix name memory leak in pnp_alloc_dev()
perf/x86/intel/uncore: Fix reference count leak in hswep_has_limit_sbox()
perf/x86/intel/uncore: Fix reference count leak in snr_uncore_mmio_map()
perf/x86/intel/uncore: Fix reference count leak in __uncore_imc_init_box()
platform/chrome: cros_usbpd_notify: Fix error handling in cros_usbpd_notify_init()
irqchip: gic-pm: Use pm_runtime_resume_and_get() in gic_probe()
EDAC/i10nm: fix refcount leak in pci_get_dev_wrapper()
nfsd: don't call nfsd_file_put from client states seqfile display
genirq/irqdesc: Don't try to remove non-existing sysfs files
cpufreq: amd_freq_sensitivity: Add missing pci_dev_put()
libfs: add DEFINE_SIMPLE_ATTRIBUTE_SIGNED for signed value
lib/notifier-error-inject: fix error when writing -errno to debugfs file
docs: fault-injection: fix non-working usage of negative values
debugfs: fix error when writing negative value to atomic_t debugfs file
ocfs2: ocfs2_mount_volume does cleanup job before return error
ocfs2: rewrite error handling of ocfs2_fill_super
ocfs2: fix memory leak in ocfs2_mount_volume()
rapidio: fix possible name leaks when rio_add_device() fails
rapidio: rio: fix possible name leak in rio_register_mport()
clocksource/drivers/sh_cmt: Make sure channel clock supply is enabled
clocksource/drivers/sh_cmt: Access registers according to spec
futex: Move to kernel/futex/
futex: Resend potentially swallowed owner death notification
cpu/hotplug: Make target_store() a nop when target == state
clocksource/drivers/timer-ti-dm: Fix missing clk_disable_unprepare in dmtimer_systimer_init_clock()
ACPICA: Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage()
uprobes/x86: Allow to probe a NOP instruction with 0x66 prefix
x86/xen: Fix memory leak in xen_smp_intr_init{_pv}()
x86/xen: Fix memory leak in xen_init_lock_cpu()
xen/privcmd: Fix a possible warning in privcmd_ioctl_mmap_resource()
PM: runtime: Improve path in rpm_idle() when no callback
PM: runtime: Do not call __rpm_callback() from rpm_idle()
platform/x86: mxm-wmi: fix memleak in mxm_wmi_call_mx[ds|mx]()
platform/x86: intel_scu_ipc: fix possible name leak in __intel_scu_ipc_register()
MIPS: BCM63xx: Add check for NULL for clk in clk_enable
MIPS: OCTEON: warn only once if deprecated link status is being used
fs: sysv: Fix sysv_nblocks() returns wrong value
rapidio: fix possible UAF when kfifo_alloc() fails
eventfd: change int to __u64 in eventfd_signal() ifndef CONFIG_EVENTFD
relay: fix type mismatch when allocating memory in relay_create_buf()
hfs: Fix OOB Write in hfs_asc2mac
rapidio: devices: fix missing put_device in mport_cdev_open
wifi: ath9k: hif_usb: fix memory leak of urbs in ath9k_hif_usb_dealloc_tx_urbs()
wifi: ath9k: hif_usb: Fix use-after-free in ath9k_hif_usb_reg_in_cb()
wifi: rtl8xxxu: Fix reading the vendor of combo chips
drm/bridge: adv7533: remove dynamic lane switching from adv7533 bridge
libbpf: Fix use-after-free in btf_dump_name_dups
libbpf: Fix null-pointer dereference in find_prog_by_sec_insn()
pata_ipx4xx_cf: Fix unsigned comparison with less than zero
media: coda: jpeg: Add check for kmalloc
media: i2c: ad5820: Fix error path
venus: pm_helpers: Fix error check in vcodec_domains_get()
media: exynos4-is: Use v4l2_async_notifier_add_fwnode_remote_subdev
media: exynos4-is: don't rely on the v4l2_async_subdev internals
can: kvaser_usb: do not increase tx statistics when sending error message frames
can: kvaser_usb: kvaser_usb_leaf: Get capabilities from device
can: kvaser_usb: kvaser_usb_leaf: Rename {leaf,usbcan}_cmd_error_event to {leaf,usbcan}_cmd_can_error_event
can: kvaser_usb: kvaser_usb_leaf: Handle CMD_ERROR_EVENT
can: kvaser_usb_leaf: Set Warning state even without bus errors
can: kvaser_usb_leaf: Fix improved state not being reported
can: kvaser_usb_leaf: Fix wrong CAN state after stopping
can: kvaser_usb_leaf: Fix bogus restart events
can: kvaser_usb: Add struct kvaser_usb_busparams
can: kvaser_usb: Compare requested bittiming parameters with actual parameters in do_set_{,data}_bittiming
drm/rockchip: lvds: fix PM usage counter unbalance in poweron
clk: renesas: r9a06g032: Repair grave increment error
spi: Update reference to struct spi_controller
drm/panel/panel-sitronix-st7701: Remove panel on DSI attach failure
ima: Fix fall-through warnings for Clang
ima: Handle -ESTALE returned by ima_filter_rule_match()
drm/msm/hdmi: switch to drm_bridge_connector
drm/msm/hdmi: drop unused GPIO support
bpf: Fix slot type check in check_stack_write_var_off
media: vivid: fix compose size exceed boundary
media: platform: exynos4-is: fix return value check in fimc_md_probe()
bpf: propagate precision in ALU/ALU64 operations
bpf: Check the other end of slot_type for STACK_SPILL
bpf: propagate precision across all frames, not just the last one
clk: qcom: gcc-sm8250: Use retention mode for USB GDSCs
mtd: Fix device name leak when register device failed in add_mtd_device()
Input: joystick - fix Kconfig warning for JOYSTICK_ADC
wifi: rsi: Fix handling of 802.3 EAPOL frames sent via control port
media: camss: Clean up received buffers on failed start of streaming
net, proc: Provide PROC_FS=n fallback for proc_create_net_single_write()
rxrpc: Fix ack.bufferSize to be 0 when generating an ack
drm/radeon: Add the missed acpi_put_table() to fix memory leak
drm/mediatek: Modify dpi power on/off sequence.
ASoC: pxa: fix null-pointer dereference in filter()
regulator: core: fix unbalanced of node refcount in regulator_dev_lookup()
amdgpu/pm: prevent array underflow in vega20_odn_edit_dpm_table()
drm/fourcc: Add packed 10bit YUV 4:2:0 format
drm/fourcc: Fix vsub/hsub for Q410 and Q401
integrity: Fix memory leakage in keyring allocation error path
ima: Fix misuse of dereference of pointer in template_desc_init_fields()
wifi: ath10k: Fix return value in ath10k_pci_init()
mtd: lpddr2_nvm: Fix possible null-ptr-deref
Input: elants_i2c - properly handle the reset GPIO when power is off
media: vidtv: Fix use-after-free in vidtv_bridge_dvb_init()
media: solo6x10: fix possible memory leak in solo_sysfs_init()
media: platform: exynos4-is: Fix error handling in fimc_md_init()
media: videobuf-dma-contig: use dma_mmap_coherent
inet: add READ_ONCE(sk->sk_bound_dev_if) in inet_csk_bind_conflict()
bpf: Move skb->len == 0 checks into __bpf_redirect
HID: hid-sensor-custom: set fixed size for custom attributes
ALSA: pcm: fix undefined behavior in bit shift for SNDRV_PCM_RATE_KNOT
ALSA: seq: fix undefined behavior in bit shift for SNDRV_SEQ_FILTER_USE_EVENT
regulator: core: use kfree_const() to free space conditionally
clk: rockchip: Fix memory leak in rockchip_clk_register_pll()
drm/amdgpu: fix pci device refcount leak
bonding: fix link recovery in mode 2 when updelay is nonzero
mtd: maps: pxa2xx-flash: fix memory leak in probe
drbd: fix an invalid memory access caused by incorrect use of list iterator
ASoC: qcom: Add checks for devm_kcalloc
media: vimc: Fix wrong function called when vimc_init() fails
media: imon: fix a race condition in send_packet()
clk: imx: replace osc_hdmi with dummy
pinctrl: pinconf-generic: add missing of_node_put()
media: dvb-core: Fix ignored return value in dvb_register_frontend()
media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()
media: s5p-mfc: Add variant data for MFC v7 hardware for Exynos 3250 SoC
drm/tegra: Add missing clk_disable_unprepare() in tegra_dc_probe()
ASoC: dt-bindings: wcd9335: fix reset line polarity in example
ASoC: mediatek: mtk-btcvsd: Add checks for write and read of mtk_btcvsd_snd
NFSv4.2: Clear FATTR4_WORD2_SECURITY_LABEL when done decoding
NFSv4.2: Fix a memory stomp in decode_attr_security_label
NFSv4.2: Fix initialisation of struct nfs4_label
NFSv4: Fix a deadlock between nfs4_open_recover_helper() and delegreturn
NFS: Fix an Oops in nfs_d_automount()
ALSA: asihpi: fix missing pci_disable_device()
wifi: iwlwifi: mvm: fix double free on tx path.
ASoC: mediatek: mt8173: Fix debugfs registration for components
ASoC: mediatek: mt8173: Enable IRQ when pdata is ready
drm/amd/pm/smu11: BACO is supported when it's in BACO state
drm/radeon: Fix PCI device refcount leak in radeon_atrm_get_bios()
drm/amdgpu: Fix PCI device refcount leak in amdgpu_atrm_get_bios()
ASoC: pcm512x: Fix PM disable depth imbalance in pcm512x_probe
netfilter: conntrack: set icmpv6 redirects as RELATED
bpf, sockmap: Fix repeated calls to sock_put() when msg has more_data
bpf, sockmap: Fix data loss caused by using apply_bytes on ingress redirect
bonding: uninitialized variable in bond_miimon_inspect()
spi: spidev: mask SPI_CS_HIGH in SPI_IOC_RD_MODE
wifi: mac80211: fix memory leak in ieee80211_if_add()
wifi: cfg80211: Fix not unregister reg_pdev when load_builtin_regdb_keys() fails
wifi: mt76: fix coverity overrun-call in mt76_get_txpower()
regulator: core: fix module refcount leak in set_supply()
clk: qcom: clk-krait: fix wrong div2 functions
hsr: Add a rcu-read lock to hsr_forward_skb().
net: hsr: generate supervision frame without HSR/PRP tag
hsr: Disable netpoll.
hsr: Synchronize sending frames to have always incremented outgoing seq nr.
hsr: Synchronize sequence number updates.
configfs: fix possible memory leak in configfs_create_dir()
regulator: core: fix resource leak in regulator_register()
hwmon: (jc42) Convert register access and caching to regmap/regcache
hwmon: (jc42) Restore the min/max/critical temperatures on resume
bpf, sockmap: fix race in sock_map_free()
ALSA: pcm: Set missing stop_operating flag at undoing trigger start
media: saa7164: fix missing pci_disable_device()
ALSA: mts64: fix possible null-ptr-defer in snd_mts64_interrupt
xprtrdma: Fix regbuf data not freed in rpcrdma_req_create()
SUNRPC: Fix missing release socket in rpc_sockname()
NFSv4.x: Fail client initialisation if state manager thread can't run
mmc: alcor: fix return value check of mmc_add_host()
mmc: moxart: fix return value check of mmc_add_host()
mmc: mxcmmc: fix return value check of mmc_add_host()
mmc: pxamci: fix return value check of mmc_add_host()
mmc: rtsx_usb_sdmmc: fix return value check of mmc_add_host()
mmc: toshsd: fix return value check of mmc_add_host()
mmc: vub300: fix return value check of mmc_add_host()
mmc: wmt-sdmmc: fix return value check of mmc_add_host()
mmc: atmel-mci: fix return value check of mmc_add_host()
mmc: omap_hsmmc: fix return value check of mmc_add_host()
mmc: meson-gx: fix return value check of mmc_add_host()
mmc: via-sdmmc: fix return value check of mmc_add_host()
mmc: wbsd: fix return value check of mmc_add_host()
mmc: mmci: fix return value check of mmc_add_host()
media: c8sectpfe: Add of_node_put() when breaking out of loop
media: coda: Add check for dcoda_iram_alloc
media: coda: Add check for kmalloc
clk: samsung: Fix memory leak in _samsung_clk_register_pll()
spi: spi-gpio: Don't set MOSI as an input if not 3WIRE mode
wifi: rtl8xxxu: Add __packed to struct rtl8723bu_c2h
wifi: rtl8xxxu: Fix the channel width reporting
wifi: brcmfmac: Fix error return code in brcmf_sdio_download_firmware()
blktrace: Fix output non-blktrace event when blk_classic option enabled
clk: socfpga: clk-pll: Remove unused variable 'rc'
clk: socfpga: use clk_hw_register for a5/c5
clk: socfpga: Fix memory leak in socfpga_gate_init()
net: vmw_vsock: vmci: Check memcpy_from_msg()
net: defxx: Fix missing err handling in dfx_init()
net: stmmac: selftests: fix potential memleak in stmmac_test_arpoffload()
drivers: net: qlcnic: Fix potential memory leak in qlcnic_sriov_init()
of: overlay: fix null pointer dereferencing in find_dup_cset_node_entry() and find_dup_cset_prop()
ethernet: s2io: don't call dev_kfree_skb() under spin_lock_irqsave()
net: farsync: Fix kmemleak when rmmods farsync
net/tunnel: wait until all sk_user_data reader finish before releasing the sock
net: apple: mace: don't call dev_kfree_skb() under spin_lock_irqsave()
net: apple: bmac: don't call dev_kfree_skb() under spin_lock_irqsave()
net: emaclite: don't call dev_kfree_skb() under spin_lock_irqsave()
net: ethernet: dnet: don't call dev_kfree_skb() under spin_lock_irqsave()
hamradio: don't call dev_kfree_skb() under spin_lock_irqsave()
net: amd: lance: don't call dev_kfree_skb() under spin_lock_irqsave()
net: amd-xgbe: Fix logic around active and passive cables
net: amd-xgbe: Check only the minimum speed for active/passive cables
can: tcan4x5x: Remove invalid write in clear_interrupts
net: lan9303: Fix read error execution path
ntb_netdev: Use dev_kfree_skb_any() in interrupt context
sctp: sysctl: make extra pointers netns aware
Bluetooth: btusb: don't call kfree_skb() under spin_lock_irqsave()
Bluetooth: hci_qca: don't call kfree_skb() under spin_lock_irqsave()
Bluetooth: hci_ll: don't call kfree_skb() under spin_lock_irqsave()
Bluetooth: hci_h5: don't call kfree_skb() under spin_lock_irqsave()
Bluetooth: hci_bcsp: don't call kfree_skb() under spin_lock_irqsave()
Bluetooth: hci_core: don't call kfree_skb() under spin_lock_irqsave()
Bluetooth: RFCOMM: don't call kfree_skb() under spin_lock_irqsave()
stmmac: fix potential division by 0
apparmor: fix a memleak in multi_transaction_new()
apparmor: fix lockdep warning when removing a namespace
apparmor: Fix abi check to include v8 abi
crypto: sun8i-ss - use dma_addr instead u32
crypto: nitrox - avoid double free on error path in nitrox_sriov_init()
scsi: core: Fix a race between scsi_done() and scsi_timeout()
apparmor: Use pointer to struct aa_label for lbs_cred
PCI: dwc: Fix n_fts[] array overrun
RDMA/core: Fix order of nldev_exit call
PCI: pci-epf-test: Register notifier if only core_init_notifier is enabled
f2fs: Fix the race condition of resize flag between resizefs
crypto: rockchip - do not do custom power management
crypto: rockchip - do not store mode globally
crypto: rockchip - add fallback for cipher
crypto: rockchip - add fallback for ahash
crypto: rockchip - better handle cipher key
crypto: rockchip - remove non-aligned handling
crypto: rockchip - delete unneeded variable initialization
crypto: rockchip - rework by using crypto_engine
apparmor: Fix memleak in alloc_ns()
f2fs: fix normal discard process
RDMA/siw: Fix immediate work request flush to completion queue
RDMA/nldev: Return "-EAGAIN" if the cm_id isn't from expected port
RDMA/siw: Set defined status for work completion with undefined status
scsi: scsi_debug: Fix a warning in resp_write_scat()
crypto: ccree - Remove debugfs when platform_driver_register failed
crypto: cryptd - Use request context instead of stack for sub-request
crypto: hisilicon/qm - add missing pci_dev_put() in q_num_set()
RDMA/hns: Repacing 'dseg_len' by macros in fill_ext_sge_inl_data()
RDMA/hns: Fix ext_sge num error when post send
PCI: Check for alloc failure in pci_request_irq()
RDMA/hfi: Decrease PCI device reference count in error path
crypto: ccree - Make cc_debugfs_global_fini() available for module init function
RDMA/hns: fix memory leak in hns_roce_alloc_mr()
RDMA/rxe: Fix NULL-ptr-deref in rxe_qp_do_cleanup() when socket create failed
scsi: hpsa: Fix possible memory leak in hpsa_init_one()
crypto: tcrypt - Fix multibuffer skcipher speed test mem leak
padata: Always leave BHs disabled when running ->parallel()
padata: Fix list iterator in padata_do_serial()
scsi: mpt3sas: Fix possible resource leaks in mpt3sas_transport_port_add()
scsi: hpsa: Fix error handling in hpsa_add_sas_host()
scsi: hpsa: Fix possible memory leak in hpsa_add_sas_device()
scsi: scsi_debug: Fix a warning in resp_verify()
scsi: scsi_debug: Fix a warning in resp_report_zones()
scsi: fcoe: Fix possible name leak when device_register() fails
scsi: scsi_debug: Fix possible name leak in sdebug_add_host_helper()
scsi: ipr: Fix WARNING in ipr_init()
scsi: fcoe: Fix transport not deattached when fcoe_if_init() fails
scsi: snic: Fix possible UAF in snic_tgt_create()
RDMA/nldev: Add checks for nla_nest_start() in fill_stat_counter_qps()
f2fs: avoid victim selection from previous victim section
RDMA/nldev: Fix failure to send large messages
crypto: amlogic - Remove kcalloc without check
crypto: omap-sham - Use pm_runtime_resume_and_get() in omap_sham_probe()
riscv/mm: add arch hook arch_clear_hugepage_flags
RDMA/hfi1: Fix error return code in parse_platform_config()
RDMA/srp: Fix error return code in srp_parse_options()
orangefs: Fix sysfs not cleanup when dev init failed
RDMA/hns: Fix PBL page MTR find
RDMA/hns: Fix page size cap from firmware
crypto: img-hash - Fix variable dereferenced before check 'hdev->req'
hwrng: amd - Fix PCI device refcount leak
hwrng: geode - Fix PCI device refcount leak
IB/IPoIB: Fix queue count inconsistency for PKEY child interfaces
drivers: dio: fix possible memory leak in dio_init()
serial: tegra: Read DMA status before terminating
class: fix possible memory leak in __class_register()
vfio: platform: Do not pass return buffer to ACPI _RST method
uio: uio_dmem_genirq: Fix missing unlock in irq configuration
uio: uio_dmem_genirq: Fix deadlock between irq config and handling
usb: fotg210-udc: Fix ages old endianness issues
staging: vme_user: Fix possible UAF in tsi148_dma_list_add
usb: typec: Check for ops->exit instead of ops->enter in altmode_exit
usb: typec: tcpci: fix of node refcount leak in tcpci_register_port()
usb: typec: tipd: Fix spurious fwnode_handle_put in error path
serial: amba-pl011: avoid SBSA UART accessing DMACR register
serial: pl011: Do not clear RX FIFO & RX interrupt in unthrottle.
serial: pch: Fix PCI device refcount leak in pch_request_dma()
tty: serial: clean up stop-tx part in altera_uart_tx_chars()
tty: serial: altera_uart_{r,t}x_chars() need only uart_port
serial: altera_uart: fix locking in polling mode
serial: sunsab: Fix error handling in sunsab_init()
test_firmware: fix memory leak in test_firmware_init()
misc: ocxl: fix possible name leak in ocxl_file_register_afu()
ocxl: fix pci device refcount leak when calling get_function_0()
misc: tifm: fix possible memory leak in tifm_7xx1_switch_media()
misc: sgi-gru: fix use-after-free error in gru_set_context_option, gru_fault and gru_handle_user_call_os
firmware: raspberrypi: fix possible memory leak in rpi_firmware_probe()
cxl: fix possible null-ptr-deref in cxl_guest_init_afu|adapter()
cxl: fix possible null-ptr-deref in cxl_pci_init_afu|adapter()
iio: temperature: ltc2983: make bulk write buffer DMA-safe
genirq: Add IRQF_NO_AUTOEN for request_irq/nmi()
iio:imu:adis: Use IRQF_NO_AUTOEN instead of irq request then disable
iio: adis: handle devices that cannot unmask the drdy pin
iio: adis: stylistic changes
iio:imu:adis: Move exports into IIO_ADISLIB namespace
iio: adis: add '__adis_enable_irq()' implementation
counter: stm32-lptimer-cnt: fix the check on arr and cmp registers update
usb: roles: fix of node refcount leak in usb_role_switch_is_parent()
usb: gadget: f_hid: optional SETUP/SET_REPORT mode
usb: gadget: f_hid: fix f_hidg lifetime vs cdev
usb: gadget: f_hid: fix refcount leak on error path
drivers: mcb: fix resource leak in mcb_probe()
mcb: mcb-parse: fix error handing in chameleon_parse_gdd()
chardev: fix error handling in cdev_device_add()
i2c: pxa-pci: fix missing pci_disable_device() on error in ce4100_i2c_probe
staging: rtl8192u: Fix use after free in ieee80211_rx()
staging: rtl8192e: Fix potential use-after-free in rtllib_rx_Monitor()
vme: Fix error not catched in fake_init()
gpiolib: Get rid of redundant 'else'
gpiolib: cdev: fix NULL-pointer dereferences
i2c: mux: reg: check return value after calling platform_get_resource()
i2c: ismt: Fix an out-of-bounds bug in ismt_access()
usb: storage: Add check for kcalloc
tracing/hist: Fix issue of losting command info in error_log
samples: vfio-mdev: Fix missing pci_disable_device() in mdpy_fb_probe()
thermal/drivers/imx8mm_thermal: Validate temperature range
fbdev: ssd1307fb: Drop optional dependency
fbdev: pm2fb: fix missing pci_disable_device()
fbdev: via: Fix error in via_core_init()
fbdev: vermilion: decrease reference count in error path
fbdev: uvesafb: Fixes an error handling path in uvesafb_probe()
HSI: omap_ssi_core: fix unbalanced pm_runtime_disable()
HSI: omap_ssi_core: fix possible memory leak in ssi_probe()
power: supply: fix residue sysfs file in error handle route of __power_supply_register()
perf trace: Return error if a system call doesn't exist
perf trace: Use macro RAW_SYSCALL_ARGS_NUM to replace number
perf trace: Handle failure when trace point folder is missed
perf symbol: correction while adjusting symbol
HSI: omap_ssi_core: Fix error handling in ssi_init()
power: supply: fix null pointer dereferencing in power_supply_get_battery_info
RDMA/siw: Fix pointer cast warning
iommu/sun50i: Fix reset release
iommu/sun50i: Consider all fault sources for reset
iommu/sun50i: Fix R/W permission check
iommu/sun50i: Fix flush size
phy: usb: s2 WoL wakeup_count not incremented for USB->Eth devices
include/uapi/linux/swab: Fix potentially missing __always_inline
pwm: tegra: Improve required rate calculation
dmaengine: idxd: Fix crc_val field for completion record
rtc: rtc-cmos: Do not check ACPI_FADT_LOW_POWER_S0
rtc: cmos: Fix event handler registration ordering issue
rtc: cmos: Fix wake alarm breakage
rtc: cmos: fix build on non-ACPI platforms
rtc: cmos: Call cmos_wake_setup() from cmos_do_probe()
rtc: cmos: Call rtc_wake_setup() from cmos_do_probe()
rtc: cmos: Eliminate forward declarations of some functions
rtc: cmos: Rename ACPI-related functions
rtc: cmos: Disable ACPI RTC event on removal
rtc: snvs: Allow a time difference on clock register read
rtc: pcf85063: Fix reading alarm
iommu/amd: Fix pci device refcount leak in ppr_notifier()
iommu/fsl_pamu: Fix resource leak in fsl_pamu_probe()
macintosh: fix possible memory leak in macio_add_one_device()
macintosh/macio-adb: check the return value of ioremap()
powerpc/52xx: Fix a resource leak in an error handling path
cxl: Fix refcount leak in cxl_calc_capp_routing
powerpc/xmon: Enable breakpoints on 8xx
powerpc/xmon: Fix -Wswitch-unreachable warning in bpt_cmds
powerpc/xive: add missing iounmap() in error path in xive_spapr_populate_irq_data()
kbuild: remove unneeded mkdir for external modules_install
kbuild: unify modules(_install) for in-tree and external modules
kbuild: refactor single builds of *.ko
powerpc/perf: callchain validate kernel stack pointer bounds
powerpc/83xx/mpc832x_rdb: call platform_device_put() in error case in of_fsl_spi_probe()
powerpc/hv-gpci: Fix hv_gpci event list
selftests/powerpc: Fix resource leaks
iommu/sun50i: Remove IOMMU_DOMAIN_IDENTITY
pwm: sifive: Call pwm_sifive_update_clock() while mutex is held
remoteproc: sysmon: fix memory leak in qcom_add_sysmon_subdev()
remoteproc: qcom_q6v5_pas: disable wakeup on probe fail or remove
remoteproc: qcom_q6v5_pas: detach power domains on remove
remoteproc: qcom_q6v5_pas: Fix missing of_node_put() in adsp_alloc_memory_region()
powerpc/eeh: Drop redundant spinlock initialization
powerpc/pseries/eeh: use correct API for error log size
netfilter: flowtable: really fix NAT IPv6 offload
rtc: st-lpc: Add missing clk_disable_unprepare in st_rtc_probe()
rtc: pic32: Move devm_rtc_allocate_device earlier in pic32_rtc_probe()
rtc: pcf85063: fix pcf85063_clkout_control
NFSD: Remove spurious cb_setup_err tracepoint
nfsd: under NFSv4.1, fix double svc_xprt_put on rpc_create failure
net: macsec: fix net device access prior to holding a lock
mISDN: hfcsusb: don't call dev_kfree_skb/kfree_skb() under spin_lock_irqsave()
mISDN: hfcpci: don't call dev_kfree_skb/kfree_skb() under spin_lock_irqsave()
mISDN: hfcmulti: don't call dev_kfree_skb/kfree_skb() under spin_lock_irqsave()
nfc: pn533: Clear nfc_target before being used
r6040: Fix kmemleak in probe and remove
net: switch to storing KCOV handle directly in sk_buff
net: add inline function skb_csum_is_sctp
net: igc: use skb_csum_is_sctp instead of protocol check
net: add a helper to avoid issues with HW TX timestamping and SO_TXTIME
igc: Enhance Qbv scheduling by using first flag bit
igc: Use strict cycles for Qbv scheduling
igc: Add checking for basetime less than zero
igc: recalculate Qbv end_time by considering cycle time
igc: Lift TAPRIO schedule restriction
igc: Set Qbv start_time and end_time to end_time if not being configured in GCL
rtc: mxc_v2: Add missing clk_disable_unprepare()
selftests: devlink: fix the fd redirect in dummy_reporter_test
openvswitch: Fix flow lookup to use unmasked key
skbuff: Account for tail adjustment during pull operations
mailbox: zynq-ipi: fix error handling while device_register() fails
net_sched: reject TCF_EM_SIMPLE case for complex ematch module
rxrpc: Fix missing unlock in rxrpc_do_sendmsg()
myri10ge: Fix an error handling path in myri10ge_probe()
net: stream: purge sk_error_queue in sk_stream_kill_queues()
rcu: Fix __this_cpu_read() lockdep warning in rcu_force_quiescent_state()
arm64: make is_ttbrX_addr() noinstr-safe
video: hyperv_fb: Avoid taking busy spinlock on panic path
x86/hyperv: Remove unregister syscore call from Hyper-V cleanup
binfmt_misc: fix shift-out-of-bounds in check_special_flags
fs: jfs: fix shift-out-of-bounds in dbAllocAG
udf: Avoid double brelse() in udf_rename()
fs: jfs: fix shift-out-of-bounds in dbDiscardAG
ACPICA: Fix error code path in acpi_ds_call_control_method()
nilfs2: fix shift-out-of-bounds/overflow in nilfs_sb2_bad_offset()
nilfs2: fix shift-out-of-bounds due to too large exponent of block size
acct: fix potential integer overflow in encode_comp_t()
hfs: fix OOB Read in __hfs_brec_find
drm/etnaviv: add missing quirks for GC300
brcmfmac: return error when getting invalid max_flowrings from dongle
wifi: ath9k: verify the expected usb_endpoints are present
wifi: ar5523: Fix use-after-free on ar5523_cmd() timed out
ASoC: codecs: rt298: Add quirk for KBL-R RVP platform
ipmi: fix memleak when unload ipmi driver
drm/amd/display: prevent memory leak
qed (gcc13): use u16 for fid to be big enough
bpf: make sure skb->len != 0 when redirecting to a tunneling device
net: ethernet: ti: Fix return type of netcp_ndo_start_xmit()
hamradio: baycom_epp: Fix return type of baycom_send_packet()
wifi: brcmfmac: Fix potential shift-out-of-bounds in brcmf_fw_alloc_request()
igb: Do not free q_vector unless new one was allocated
drm/amdgpu: Fix type of second parameter in trans_msg() callback
drm/amdgpu: Fix type of second parameter in odn_edit_dpm_table() callback
s390/ctcm: Fix return type of ctc{mp,}m_tx()
s390/netiucv: Fix return type of netiucv_tx()
s390/lcs: Fix return type of lcs_start_xmit()
drm/msm: Use drm_mode_copy()
drm/rockchip: Use drm_mode_copy()
drm/sti: Use drm_mode_copy()
drivers/md/md-bitmap: check the return value of md_bitmap_get_counter()
md/raid1: stop mdx_raid1 thread when raid1 array run failed
drm/amd/display: fix array index out of bound error in bios parser
net: add atomic_long_t to net_device_stats fields
mrp: introduce active flags to prevent UAF when applicant uninit
ppp: associate skb with a device at tx
bpf: Prevent decl_tag from being referenced in func_proto arg
ethtool: avoiding integer overflow in ethtool_phys_id()
media: dvb-frontends: fix leak of memory fw
media: dvbdev: adopts refcnt to avoid UAF
media: dvb-usb: fix memory leak in dvb_usb_adapter_init()
blk-mq: fix possible memleak when register 'hctx' failed
libbpf: Avoid enum forward-declarations in public API in C++ mode
regulator: core: fix use_count leakage when handling boot-on
mmc: f-sdh30: Add quirks for broken timeout clock capability
mmc: renesas_sdhi: better reset from HS400 mode
media: si470x: Fix use-after-free in si470x_int_in_callback()
clk: st: Fix memory leak in st_of_quadfs_setup()
hugetlbfs: fix null-ptr-deref in hugetlbfs_parse_param()
drm/fsl-dcu: Fix return type of fsl_dcu_drm_connector_mode_valid()
drm/sti: Fix return type of sti_{dvo,hda,hdmi}_connector_mode_valid()
orangefs: Fix kmemleak in orangefs_prepare_debugfs_help_string()
orangefs: Fix kmemleak in orangefs_{kernel,client}_debug_init()
hwmon: (jc42) Fix missing unlock on error in jc42_write()
ALSA/ASoC: hda: move/rename snd_hdac_ext_stop_streams to hdac_stream.c
ALSA: hda: add snd_hdac_stop_streams() helper
ASoC: Intel: Skylake: Fix driver hang during shutdown
ASoC: mediatek: mt8173-rt5650-rt5514: fix refcount leak in mt8173_rt5650_rt5514_dev_probe()
ASoC: audio-graph-card: fix refcount leak of cpu_ep in __graph_for_each_link()
ASoC: rockchip: pdm: Add missing clk_disable_unprepare() in rockchip_pdm_runtime_resume()
ASoC: wm8994: Fix potential deadlock
ASoC: rockchip: spdif: Add missing clk_disable_unprepare() in rk_spdif_runtime_resume()
ASoC: rt5670: Remove unbalanced pm_runtime_put()
LoadPin: Ignore the "contents" argument of the LSM hooks
pstore: Switch pmsg_lock to an rt_mutex to avoid priority inversion
perf debug: Set debug_peo_args and redirect_to_stderr variable to correct values in perf_quiet_option()
afs: Fix lost servers_outstanding count
pstore: Make sure CONFIG_PSTORE_PMSG selects CONFIG_RT_MUTEXES
ima: Simplify ima_lsm_copy_rule
ALSA: usb-audio: add the quirk for KT0206 device
ALSA: hda/realtek: Add quirk for Lenovo TianYi510Pro-14IOB
ALSA: hda/hdmi: Add HP Device 0x8711 to force connect list
usb: dwc3: Fix race between dwc3_set_mode and __dwc3_set_mode
usb: dwc3: core: defer probe on ulpi_read_id timeout
HID: wacom: Ensure bootloader PID is usable in hidraw mode
HID: mcp2221: don't connect hidraw
reiserfs: Add missing calls to reiserfs_security_free()
iio: adc: ad_sigma_delta: do not use internal iio_dev lock
iio: adc128s052: add proper .data members in adc128_of_match table
regulator: core: fix deadlock on regulator enable
gcov: add support for checksum field
ovl: fix use inode directly in rcu-walk mode
media: dvbdev: fix build warning due to comments
media: dvbdev: fix refcnt bug
pwm: tegra: Fix 32 bit build
usb: dwc3: qcom: Fix memory leak in dwc3_qcom_interconnect_init
cifs: fix oops during encryption
nvme-pci: fix doorbell buffer value endianness
nvme-pci: fix mempool alloc size
nvme-pci: fix page size checks
ata: ahci: Fix PCS quirk application for suspend
nvme: fix the NVME_CMD_EFFECTS_CSE_MASK definition
nvmet: don't defer passthrough commands with trivial effects to the workqueue
objtool: Fix SEGFAULT
powerpc/rtas: avoid device tree lookups in rtas_os_term()
powerpc/rtas: avoid scheduling in rtas_os_term()
HID: multitouch: fix Asus ExpertBook P2 P2451FA trackpoint
HID: plantronics: Additional PIDs for double volume key presses quirk
pstore/zone: Use GFP_ATOMIC to allocate zone buffer
hfsplus: fix bug causing custom uid and gid being unable to be assigned with mount
binfmt: Fix error return code in load_elf_fdpic_binary()
ovl: Use ovl mounter's fsuid and fsgid in ovl_link()
ALSA: line6: correct midi status byte when receiving data from podxt
ALSA: line6: fix stack overflow in line6_midi_transmit
pnode: terminate at peers of source
md: fix a crash in mempool_free
mm, compaction: fix fast_isolate_around() to stay within boundaries
f2fs: should put a page when checking the summary info
mmc: vub300: fix warning - do not call blocking ops when !TASK_RUNNING
tpm: acpi: Call acpi_put_table() to fix memory leak
tpm: tpm_crb: Add the missed acpi_put_table() to fix memory leak
tpm: tpm_tis: Add the missed acpi_put_table() to fix memory leak
SUNRPC: Don't leak netobj memory when gss_read_proxy_verf() fails
kcsan: Instrument memcpy/memset/memmove with newer Clang
ASoC: Intel/SOF: use set_stream() instead of set_tdm_slots() for HDAudio
ASoC/SoundWire: dai: expand 'stream' concept beyond SoundWire
net/mlx5e: Fix nullptr in mlx5e_tc_add_fdb_flow()
wifi: rtlwifi: remove always-true condition pointed out by GCC 12
wifi: rtlwifi: 8192de: correct checking of IQK reload
torture: Exclude "NOHZ tick-stop error" from fatal errors
rcu: Prevent lockdep-RCU splats on lock acquisition/release
net/af_packet: add VLAN support for AF_PACKET SOCK_RAW GSO
net/af_packet: make sure to pull mac header
media: stv0288: use explicitly signed char
soc: qcom: Select REMAP_MMIO for LLCC driver
kest.pl: Fix grub2 menu handling for rebooting
ktest.pl minconfig: Unset configs instead of just removing them
jbd2: use the correct print format
arm64: dts: qcom: sdm845-db845c: correct SPI2 pins drive strength
mmc: sdhci-sprd: Disable CLK_AUTO when the clock is less than 400K
btrfs: fix resolving backrefs for inline extent followed by prealloc
ARM: ux500: do not directly dereference __iomem
arm64: dts: qcom: sdm850-lenovo-yoga-c630: correct I2C12 pins drive strength
selftests: Use optional USERCFLAGS and USERLDFLAGS
PM/devfreq: governor: Add a private governor_data for governor
cpufreq: Init completion before kobject_init_and_add()
ALSA: patch_realtek: Fix Dell Inspiron Plus 16
ALSA: hda/realtek: Apply dual codec fixup for Dell Latitude laptops
dm cache: Fix ABBA deadlock between shrink_slab and dm_cache_metadata_abort
dm thin: Fix ABBA deadlock between shrink_slab and dm_pool_abort_metadata
dm thin: Use last transaction's pmd->root when commit failed
dm thin: resume even if in FAIL mode
dm thin: Fix UAF in run_timer_softirq()
dm integrity: Fix UAF in dm_integrity_dtr()
dm clone: Fix UAF in clone_dtr()
dm cache: Fix UAF in destroy()
dm cache: set needs_check flag after aborting metadata
tracing/hist: Fix out-of-bound write on 'action_data.var_ref_idx'
perf/core: Call LSM hook after copying perf_event_attr
KVM: nVMX: Inject #GP, not #UD, if "generic" VMXON CR0/CR4 check fails
x86/microcode/intel: Do not retry microcode reloading on the APs
ftrace/x86: Add back ftrace_expected for ftrace bug reports
x86/kprobes: Fix kprobes instruction boudary check with CONFIG_RETHUNK
tracing/hist: Fix wrong return value in parse_action_params()
tracing: Fix infinite loop in tracing_read_pipe on overflowed print_trace_line
staging: media: tegra-video: fix chan->mipi value on error
ARM: 9256/1: NWFPE: avoid compiler-generated __aeabi_uldivmod
media: dvb-core: Fix double free in dvb_register_device()
media: dvb-core: Fix UAF due to refcount races at releasing
cifs: fix confusing debug message
cifs: fix missing display of three mount options
rtc: ds1347: fix value written to century register
md/bitmap: Fix bitmap chunk size overflow issues
efi: Add iMac Pro 2017 to uefi skip cert quirk
wifi: wilc1000: sdio: fix module autoloading
ASoC: jz4740-i2s: Handle independent FIFO flush bits
ipmi: fix long wait in unload when IPMI disconnect
mtd: spi-nor: Check for zero erase size in spi_nor_find_best_erase_type()
ima: Fix a potential NULL pointer access in ima_restore_measurement_list
ipmi: fix use after free in _ipmi_destroy_user()
PCI: Fix pci_device_is_present() for VFs by checking PF
PCI/sysfs: Fix double free in error path
crypto: n2 - add missing hash statesize
driver core: Fix bus_type.match() error handling in __driver_attach()
iommu/amd: Fix ivrs_acpihid cmdline parsing code
remoteproc: core: Do pm_relax when in RPROC_OFFLINE state
parisc: led: Fix potential null-ptr-deref in start_task()
device_cgroup: Roll back to original exceptions after copy failure
drm/connector: send hotplug uevent on connector cleanup
drm/vmwgfx: Validate the box size for the snooped cursor
drm/i915/dsi: fix VBT send packet port selection for dual link DSI
drm/ingenic: Fix missing platform_driver_unregister() call in ingenic_drm_init()
ext4: silence the warning when evicting inode with dioread_nolock
ext4: add inode table check in __ext4_get_inode_loc to aovid possible infinite loop
ext4: fix use-after-free in ext4_orphan_cleanup
ext4: fix undefined behavior in bit shift for ext4_check_flag_values
ext4: add EXT4_IGET_BAD flag to prevent unexpected bad inode
ext4: add helper to check quota inums
ext4: fix bug_on in __es_tree_search caused by bad quota inode
ext4: fix reserved cluster accounting in __es_remove_extent()
ext4: check and assert if marking an no_delete evicting inode dirty
ext4: fix bug_on in __es_tree_search caused by bad boot loader inode
ext4: init quota for 'old.inode' in 'ext4_rename'
ext4: fix delayed allocation bug in ext4_clu_mapped for bigalloc + inline
ext4: fix corruption when online resizing a 1K bigalloc fs
ext4: fix error code return to user-space in ext4_get_branch()
ext4: avoid BUG_ON when creating xattrs
ext4: fix inode leak in ext4_xattr_inode_create() on an error path
ext4: initialize quota before expanding inode in setproject ioctl
ext4: avoid unaccounted block allocation when expanding inode
ext4: allocate extended attribute value in vmalloc area
drm/amdgpu: handle polaris10/11 overlap asics (v2)
drm/amdgpu: make display pinning more flexible (v2)
ARM: renumber bits related to _TIF_WORK_MASK
perf/x86/intel/uncore: Generalize I/O stacks to PMON mapping procedure
perf/x86/intel/uncore: Clear attr_update properly
btrfs: replace strncpy() with strscpy()
x86/mce: Get rid of msr_ops
x86/MCE/AMD: Clear DFR errors found in THR handler
media: s5p-mfc: Fix to handle reference queue during finishing
media: s5p-mfc: Clear workbit to handle error condition
media: s5p-mfc: Fix in register read and write for H264
perf probe: Use dwarf_attr_integrate as generic DWARF attr accessor
perf probe: Fix to get the DW_AT_decl_file and DW_AT_call_file as unsinged data
x86/kprobes: Convert to insn_decode()
x86/kprobes: Fix optprobe optimization check with CONFIG_RETHUNK
staging: media: tegra-video: fix device_node use after free
ravb: Fix "failed to switch device to config mode" message during unbind
riscv/stacktrace: Fix stack output without ra on the stack top
riscv: stacktrace: Fixup ftrace_graph_ret_addr retp argument
ext4: goto right label 'failed_mount3a'
ext4: correct inconsistent error msg in nojournal mode
mm/highmem: Lift memcpy_[to|from]_page to core
ext4: use memcpy_to_page() in pagecache_write()
fs: ext4: initialize fsdata in pagecache_write()
ext4: move functions in super.c
ext4: simplify ext4 error translation
ext4: fix various seppling typos
ext4: fix leaking uninitialized memory in fast-commit journal
ext4: use kmemdup() to replace kmalloc + memcpy
mbcache: don't reclaim used entries
mbcache: add functions to delete entry if unused
ext4: remove EA inode entry from mbcache on inode eviction
ext4: unindent codeblock in ext4_xattr_block_set()
ext4: fix race when reusing xattr blocks
mbcache: automatically delete entries from cache on freeing
ext4: fix deadlock due to mbcache entry corruption
SUNRPC: ensure the matching upcall is in-flight upon downcall
bpf: pull before calling skb_postpull_rcsum()
drm/panfrost: Fix GEM handle creation ref-counting
vmxnet3: correctly report csum_level for encapsulated packet
veth: Fix race with AF_XDP exposing old or uninitialized descriptors
nfsd: shut down the NFSv4 state objects before the filecache
net: hns3: add interrupts re-initialization while doing VF FLR
net: sched: fix memory leak in tcindex_set_parms
qlcnic: prevent ->dcb use-after-free on qlcnic_dcb_enable() failure
nfc: Fix potential resource leaks
vhost/vsock: Fix error handling in vhost_vsock_init()
vringh: fix range used in iotlb_translate()
vhost: fix range used in translate_desc()
net/mlx5: Add forgotten cleanup calls into mlx5_init_once() error path
net/mlx5: Avoid recovery in probe flows
net/mlx5e: IPoIB, Don't allow CQE compression to be turned on by default
net/mlx5e: Fix hw mtu initializing at XDP SQ allocation
net: amd-xgbe: add missed tasklet_kill
net: phy: xgmiitorgmii: Fix refcount leak in xgmiitorgmii_probe
RDMA/mlx5: Fix validation of max_rd_atomic caps for DC
drm/meson: Reduce the FIFO lines held when AFBC is not used
filelock: new helper: vfs_inode_has_locks
ceph: switch to vfs_inode_has_locks() to fix file lock bug
gpio: sifive: Fix refcount leak in sifive_gpio_probe
net: sched: atm: dont intepret cls results when asked to drop
net: sched: cbq: dont intepret cls results when asked to drop
netfilter: ipset: fix hash:net,port,net hang with /0 subnet
netfilter: ipset: Rework long task execution when adding/deleting entries
perf tools: Fix resources leak in perf_data__open_dir()
drivers/net/bonding/bond_3ad: return when there's no aggregator
usb: rndis_host: Secure rndis_query check against int overflow
drm/i915: unpin on error in intel_vgpu_shadow_mm_pin()
caif: fix memory leak in cfctrl_linkup_request()
udf: Fix extension of the last extent in the file
ASoC: Intel: bytcr_rt5640: Add quirk for the Advantech MICA-071 tablet
nvme: fix multipath crash caused by flush request when blktrace is enabled
x86/bugs: Flush IBP in ib_prctl_set()
nfsd: fix handling of readdir in v4root vs. mount upcall timeout
fbdev: matroxfb: G200eW: Increase max memory from 1 MB to 16 MB
riscv: uaccess: fix type of 0 variable on error in get_user()
drm/i915/gvt: fix gvt debugfs destroy
drm/i915/gvt: fix vgpu debugfs clean in remove
ext4: don't allow journal inode to have encrypt flag
selftests: set the BUILD variable to absolute path
hfs/hfsplus: use WARN_ON for sanity check
hfs/hfsplus: avoid WARN_ON() for sanity check, use proper error handling
mbcache: Avoid nesting of cache->c_list_lock under bit locks
efi: random: combine bootloader provided RNG seed with RNG protocol output
io_uring: Fix unsigned 'res' comparison with zero in io_fixup_rw_res()
parisc: Align parisc MADV_XXX constants with all other architectures
ext4: disable fast-commit of encrypted dir operations
ext4: don't set up encryption key during jbd2 transaction
fsl_lpuart: Don't enable interrupts too early
serial: fixup backport of "serial: Deassert Transmit Enable on probe in driver-specific way"
mptcp: mark ops structures as ro_after_init
mptcp: remove MPTCP 'ifdef' in TCP SYN cookies
mptcp: dedicated request sock for subflow in v6
mptcp: use proper req destructor for IPv6
net: sched: disallow noqueue for qdisc classes
net/ulp: prevent ULP without clone op from entering the LISTEN status
ALSA: pcm: Move rwsem lock inside snd_ctl_elem_read to prevent UAF
ALSA: hda/hdmi: Add a HP device 0x8715 to force connect list
ALSA: hda - Enable headset mic on another Dell laptop with ALC3254
Linux 5.10.163
Change-Id: I9026971760be8484f1e1fa607f9f91243cc87785
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
||
|
Barry Song
|
50aaa6b174 |
genirq: Add IRQF_NO_AUTOEN for request_irq/nmi()
[ Upstream commit cbe16f35bee6880becca6f20d2ebf6b457148552 ] Many drivers don't want interrupts enabled automatically via request_irq(). So they are handling this issue by either way of the below two: (1) irq_set_status_flags(irq, IRQ_NOAUTOEN); request_irq(dev, irq...); (2) request_irq(dev, irq...); disable_irq(irq); The code in the second way is silly and unsafe. In the small time gap between request_irq() and disable_irq(), interrupts can still come. The code in the first way is safe though it's subobtimal. Add a new IRQF_NO_AUTOEN flag which can be handed in by drivers to request_irq() and request_nmi(). It prevents the automatic enabling of the requested interrupt/nmi in the same safe way as #1 above. With that the various usage sites of #1 and #2 above can be simplified and corrected. Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: dmitry.torokhov@gmail.com Link: https://lore.kernel.org/r/20210302224916.13980-2-song.bao.hua@hisilicon.com Stable-dep-of: 99c05e4283a1 ("iio: adis: add '__adis_enable_irq()' implementation") Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
|
John Dias
|
8d19443b0b |
ANDROID: sched: avoid migrating when softint on tgt cpu should be short
The scheduling change to avoid putting RT threads on cores that are handling softint's was catching cases where there was no reason to believe the softint would take a long time, resulting in unnecessary migration overhead. This patch reduces the migration to cases where the core has a softint that is actually likely to take a long time, as opposed to the RCU, SCHED, and TIMER softints that are rather quick. Bug: 31752786 Bug: 168521633 Change-Id: Ib4e179f1e15c736b2fdba31070494e357e9fbbe2 Signed-off-by: John Dias <joaodias@google.com> [elavila: Amend commit text for AOSP, port to mainline] Signed-off-by: J. Avila <elavila@google.com> |
||
|
Joe Perches
|
33def8498f |
treewide: Convert macro and uses of __section(foo) to __section("foo")
Use a more generic form for __section that requires quotes to avoid
complications with clang and gcc differences.
Remove the quote operator # from compiler_attributes.h __section macro.
Convert all unquoted __section(foo) uses to quoted __section("foo").
Also convert __attribute__((section("foo"))) uses to __section("foo")
even if the __attribute__ has multiple list entry forms.
Conversion done using the script at:
https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Romain Perier
|
12cc923f1c |
tasklet: Introduce new initialization API
Nowadays, modern kernel subsystems that use callbacks pass the data
structure associated with a given callback as argument to the callback.
The tasklet subsystem remains one which passes an arbitrary unsigned
long to the callback function. This has several problems:
- This keeps an extra field for storing the argument in each tasklet
data structure, it bloats the tasklet_struct structure with a redundant
.data field
- No type checking can be performed on this argument. Instead of
using container_of() like other callback subsystems, it forces callbacks
to do explicit type cast of the unsigned long argument into the required
object type.
- Buffer overflows can overwrite the .func and the .data field, so
an attacker can easily overwrite the function and its first argument
to whatever it wants.
Add a new tasklet initialization API, via DECLARE_TASKLET() and
tasklet_setup(), which will replace the existing ones.
This work is greatly inspired by the timer_struct conversion series,
see commit
|
||
|
Kees Cook
|
b13fecb1c3 |
treewide: Replace DECLARE_TASKLET() with DECLARE_TASKLET_OLD()
This converts all the existing DECLARE_TASKLET() (and ...DISABLED) macros with DECLARE_TASKLET_OLD() in preparation for refactoring the tasklet callback type. All existing DECLARE_TASKLET() users had a "0" data argument, it has been removed here as well. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Kees Cook <keescook@chromium.org> |
||
|
Thomas Gleixner
|
f0178fc01f |
x86/entry: Unbreak __irqentry_text_start/end magic
The entry rework moved interrupt entry code from the irqentry to the noinstr section which made the irqentry section empty. This breaks boundary checks which rely on the __irqentry_text_start/end markers to find out whether a function in a stack trace is interrupt/exception entry code. This affects the function graph tracer and filter_irq_stacks(). As the IDT entry points are all sequentialy emitted this is rather simple to unbreak by injecting __irqentry_text_start/end as global labels. To make this work correctly: - Remove the IRQENTRY_TEXT section from the x86 linker script - Define __irqentry so it breaks the build if it's used - Adjust the entry mirroring in PTI - Remove the redundant kprobes and unwinder bound checks Reported-by: Qian Cai <cai@lca.pw> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
||
|
Thomas Gleixner
|
acd26bcf36 |
genirq: Provide interrupt injection mechanism
Error injection mechanisms need a half ways safe way to inject interrupts as invoking generic_handle_irq() or the actual device interrupt handler directly from e.g. a debugfs write is not guaranteed to be safe. On x86 generic_handle_irq() is unsafe due to the hardware trainwreck which is the base of x86 interrupt delivery and affinity management. Move the irq debugfs injection code into a separate function which can be used by error injection code as well. The implementation prevents at least that state is corrupted, but it cannot close a very tiny race window on x86 which might result in a stale and not serviced device interrupt under very unlikely circumstances. This is explicitly for debugging and testing and not for production use or abuse in random driver code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lkml.kernel.org/r/20200306130623.990928309@linutronix.de |
||
|
Linus Torvalds
|
043cf46825 |
Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Ingo Molnar:
"The main changes in the timer code in this cycle were:
- Clockevent updates:
- timer-of framework cleanups. (Geert Uytterhoeven)
- Use timer-of for the renesas-ostm and the device name to prevent
name collision in case of multiple timers. (Geert Uytterhoeven)
- Check if there is an error after calling of_clk_get in asm9260
(Chuhong Yuan)
- ABI fix: Zero out high order bits of nanoseconds on compat
syscalls. This got broken a year ago, with apparently no side
effects so far.
Since the kernel would use random data otherwise I don't think we'd
have other options but to fix the bug, even if there was a side
effect to applications (Dmitry Safonov)
- Optimize ns_to_timespec64() on 32-bit systems: move away from
div_s64_rem() which can be slow, to div_u64_rem() which is faster
(Arnd Bergmann)
- Annotate KCSAN-reported false positive data races in
hrtimer_is_queued() users by moving timer->state handling over to
the READ_ONCE()/WRITE_ONCE() APIs. This documents these accesses
(Eric Dumazet)
- Misc cleanups and small fixes"
[ I undid the "ABI fix" and updated the comments instead. The reason
there were apparently no side effects is that the fix was a no-op.
The updated comment is to say _why_ it was a no-op. - Linus ]
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Zero the upper 32-bits in __kernel_timespec on 32-bit
time: Rename tsk->real_start_time to ->start_boottime
hrtimer: Remove the comment about not used HRTIMER_SOFTIRQ
time: Fix spelling mistake in comment
time: Optimize ns_to_timespec64()
hrtimer: Annotate lockless access to timer->state
clocksource/drivers/asm9260: Add a check for of_clk_get
clocksource/drivers/renesas-ostm: Use unique device name instead of ostm
clocksource/drivers/renesas-ostm: Convert to timer_of
clocksource/drivers/timer-of: Use unique device name instead of timer
clocksource/drivers/timer-of: Convert last full_name to %pOF
|
||
|
Jonathan Corbet
|
5ca470a0c3 |
docs: Add request_irq() documentation
While checking the results of the :c:func: removal, I noticed that there was no documentation for request_irq(), and request_threaded_irq() was not mentioned at all. Add a kerneldoc comment for request_irq() and add request_threaded_irq() to the list of functions. Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jonathan Corbet <corbet@lwn.net> |
||
|
Sebastian Andrzej Siewior
|
3bbc53f4ae |
hrtimer: Remove the comment about not used HRTIMER_SOFTIRQ
The softirq `HRTIMER_SOFTIRQ' was not used since commit |
||
|
Linus Torvalds
|
77dcfe2b9e |
Merge tag 'pm-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These include a rework of the main suspend-to-idle code flow (related
to the handling of spurious wakeups), a switch over of several users
of cpufreq notifiers to QoS-based limits, a new devfreq driver for
Tegra20, a new cpuidle driver and governor for virtualized guests, an
extension of the wakeup sources framework to expose wakeup sources as
device objects in sysfs, and more.
Specifics:
- Rework the main suspend-to-idle control flow to avoid repeating
"noirq" device resume and suspend operations in case of spurious
wakeups from the ACPI EC and decouple the ACPI EC wakeups support
from the LPS0 _DSM support (Rafael Wysocki).
- Extend the wakeup sources framework to expose wakeup sources as
device objects in sysfs (Tri Vo, Stephen Boyd).
- Expose system suspend statistics in sysfs (Kalesh Singh).
- Introduce a new haltpoll cpuidle driver and a new matching governor
for virtualized guests wanting to do guest-side polling in the idle
loop (Marcelo Tosatti, Joao Martins, Wanpeng Li, Stephen Rothwell).
- Fix the menu and teo cpuidle governors to allow the scheduler tick
to be stopped if PM QoS is used to limit the CPU idle state exit
latency in some cases (Rafael Wysocki).
- Increase the resolution of the play_idle() argument to microseconds
for more fine-grained injection of CPU idle cycles (Daniel
Lezcano).
- Switch over some users of cpuidle notifiers to the new QoS-based
frequency limits and drop the CPUFREQ_ADJUST and CPUFREQ_NOTIFY
policy notifier events (Viresh Kumar).
- Add new cpufreq driver based on nvmem for sun50i (Yangtao Li).
- Add support for MT8183 and MT8516 to the mediatek cpufreq driver
(Andrew-sh.Cheng, Fabien Parent).
- Add i.MX8MN support to the imx-cpufreq-dt cpufreq driver (Anson
Huang).
- Add qcs404 to cpufreq-dt-platdev blacklist (Jorge Ramirez-Ortiz).
- Update the qcom cpufreq driver (among other things, to make it
easier to extend and to use kryo cpufreq for other nvmem-based
SoCs) and add qcs404 support to it (Niklas Cassel, Douglas
RAILLARD, Sibi Sankar, Sricharan R).
- Fix assorted issues and make assorted minor improvements in the
cpufreq code (Colin Ian King, Douglas RAILLARD, Florian Fainelli,
Gustavo Silva, Hariprasad Kelam).
- Add new devfreq driver for NVidia Tegra20 (Dmitry Osipenko, Arnd
Bergmann).
- Add new Exynos PPMU events to devfreq events and extend that
mechanism (Lukasz Luba).
- Fix and clean up the exynos-bus devfreq driver (Kamil Konieczny).
- Improve devfreq documentation and governor code, fix spelling typos
in devfreq (Ezequiel Garcia, Krzysztof Kozlowski, Leonard Crestez,
MyungJoo Ham, Gaël PORTAY).
- Add regulators enable and disable to the OPP (operating performance
points) framework (Kamil Konieczny).
- Update the OPP framework to support multiple opp-suspend properties
(Anson Huang).
- Fix assorted issues and make assorted minor improvements in the OPP
code (Niklas Cassel, Viresh Kumar, Yue Hu).
- Clean up the generic power domains (genpd) framework (Ulf Hansson).
- Clean up assorted pieces of power management code and documentation
(Akinobu Mita, Amit Kucheria, Chuhong Yuan).
- Update the pm-graph tool to version 5.5 including multiple fixes
and improvements (Todd Brandt).
- Update the cpupower utility (Benjamin Weis, Geert Uytterhoeven,
Sébastien Szymanski)"
* tag 'pm-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (126 commits)
cpuidle-haltpoll: Enable kvm guest polling when dedicated physical CPUs are available
cpuidle-haltpoll: do not set an owner to allow modunload
cpuidle-haltpoll: return -ENODEV on modinit failure
cpuidle-haltpoll: set haltpoll as preferred governor
cpuidle: allow governor switch on cpuidle_register_driver()
PM: runtime: Documentation: add runtime_status ABI document
pm-graph: make setVal unbuffered again for python2 and python3
powercap: idle_inject: Use higher resolution for idle injection
cpuidle: play_idle: Increase the resolution to usec
cpuidle-haltpoll: vcpu hotplug support
cpufreq: Add qcs404 to cpufreq-dt-platdev blacklist
cpufreq: qcom: Add support for qcs404 on nvmem driver
cpufreq: qcom: Refactor the driver to make it easier to extend
cpufreq: qcom: Re-organise kryo cpufreq to use it for other nvmem based qcom socs
dt-bindings: opp: Add qcom-opp bindings with properties needed for CPR
dt-bindings: opp: qcom-nvmem: Support pstates provided by a power domain
Documentation: cpufreq: Update policy notifier documentation
cpufreq: Remove CPUFREQ_ADJUST and CPUFREQ_NOTIFY policy notifier events
PM / Domains: Verify PM domain type in dev_pm_genpd_set_performance_state()
PM / Domains: Simplify genpd_lookup_dev()
...
|
||
|
Thomas Gleixner
|
b6a32bbd87 |
genirq: Force interrupt threading on RT
Switch force_irqthreads from a boot time modifiable variable to a compile time constant when CONFIG_PREEMPT_RT is enabled. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190816160923.12855-1-bigeasy@linutronix.de |
||
|
Rafael J. Wysocki
|
3a79bc63d9 |
PCI: irq: Introduce rearm_wake_irq()
Introduce a new function, rearm_wake_irq(), allowing a wakeup IRQ to be armed for systen wakeup detection again without running any action handlers associated with it after it has been armed for wakeup detection and triggered. That is useful for IRQs, like ACPI SCI, that may deliver wakeup as well as non-wakeup interrupts when armed for systen wakeup detection. In those cases, it may be possible to determine whether or not the delivered interrupt is a systen wakeup one without running the entire action handler (or handlers, if the IRQ is shared) for the IRQ, and if the interrupt turns out to be a non-wakeup one, the IRQ can be rearmed with the help of the new function. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> |
||
|
Mauro Carvalho Chehab
|
151f4e2bdc |
docs: power: convert docs to ReST and rename to *.rst
Convert the PM documents to ReST, in order to allow them to build with Sphinx. The conversion is actually: - add blank lines and indentation in order to identify paragraphs; - fix tables markups; - add some lists markups; - mark literal blocks; - adjust title markups. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu> |
||
|
Thomas Gleixner
|
d7dcf26ff0 |
softirq: Remove tasklet_hrtimer
There are no more users of this interface. Remove it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Link: https://lkml.kernel.org/r/20190301224821.29843-4-bigeasy@linutronix.de |
||
|
Thomas Gleixner
|
a324ca9cad |
Merge tag 'irqchip-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip updates from Marc Zyngier - Core pseudo-NMI handling code - Allow the default irq domain to be retrieved - A new interrupt controller for the Loongson LS1X platform - Affinity support for the SiFive PLIC - Better support for the iMX irqsteer driver - NUMA aware memory allocations for GICv3 - A handful of other fixes (i8259, GICv3, PLIC) |
||
|
Ming Lei
|
c66d4bd110 |
genirq/affinity: Add new callback for (re)calculating interrupt sets
The interrupt affinity spreading mechanism supports to spread out affinities for one or more interrupt sets. A interrupt set contains one or more interrupts. Each set is mapped to a specific functionality of a device, e.g. general I/O queues and read I/O queus of multiqueue block devices. The number of interrupts per set is defined by the driver. It depends on the total number of available interrupts for the device, which is determined by the PCI capabilites and the availability of underlying CPU resources, and the number of queues which the device provides and the driver wants to instantiate. The driver passes initial configuration for the interrupt allocation via a pointer to struct irq_affinity. Right now the allocation mechanism is complex as it requires to have a loop in the driver to determine the maximum number of interrupts which are provided by the PCI capabilities and the underlying CPU resources. This loop would have to be replicated in every driver which wants to utilize this mechanism. That's unwanted code duplication and error prone. In order to move this into generic facilities it is required to have a mechanism, which allows the recalculation of the interrupt sets and their size, in the core code. As the core code does not have any knowledge about the underlying device, a driver specific callback is required in struct irq_affinity, which can be invoked by the core code. The callback gets the number of available interupts as an argument, so the driver can calculate the corresponding number and size of interrupt sets. At the moment the struct irq_affinity pointer which is handed in from the driver and passed through to several core functions is marked 'const', but for the callback to be able to modify the data in the struct it's required to remove the 'const' qualifier. Add the optional callback to struct irq_affinity, which allows drivers to recalculate the number and size of interrupt sets and remove the 'const' qualifier. For simple invocations, which do not supply a callback, a default callback is installed, which just sets nr_sets to 1 and transfers the number of spreadable vectors to the set_size array at index 0. This is for now guarded by a check for nr_sets != 0 to keep the NVME driver working until it is converted to the callback mechanism. To make sure that the driver configuration is correct under all circumstances the callback is invoked even when there are no interrupts for queues left, i.e. the pre/post requirements already exhaust the numner of available interrupts. At the PCI layer irq_create_affinity_masks() has to be invoked even for the case where the legacy interrupt is used. That ensures that the callback is invoked and the device driver can adjust to that situation. [ tglx: Fixed the simple case (no sets required). Moved the sanity check for nr_sets after the invocation of the callback so it catches broken drivers. Fixed the kernel doc comments for struct irq_affinity and de-'This patch'-ed the changelog ] Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Bjorn Helgaas <helgaas@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Cc: Sagi Grimberg <sagi@grimberg.me> Cc: linux-nvme@lists.infradead.org Cc: linux-pci@vger.kernel.org Cc: Keith Busch <keith.busch@intel.com> Cc: Sumit Saxena <sumit.saxena@broadcom.com> Cc: Kashyap Desai <kashyap.desai@broadcom.com> Cc: Shivasharan Srikanteshwara <shivasharan.srikanteshwara@broadcom.com> Link: https://lkml.kernel.org/r/20190216172228.512444498@linutronix.de |
||
|
Ming Lei
|
9cfef55bb5 |
genirq/affinity: Store interrupt sets size in struct irq_affinity
The interrupt affinity spreading mechanism supports to spread out affinities for one or more interrupt sets. A interrupt set contains one or more interrupts. Each set is mapped to a specific functionality of a device, e.g. general I/O queues and read I/O queus of multiqueue block devices. The number of interrupts per set is defined by the driver. It depends on the total number of available interrupts for the device, which is determined by the PCI capabilites and the availability of underlying CPU resources, and the number of queues which the device provides and the driver wants to instantiate. The driver passes initial configuration for the interrupt allocation via a pointer to struct irq_affinity. Right now the allocation mechanism is complex as it requires to have a loop in the driver to determine the maximum number of interrupts which are provided by the PCI capabilities and the underlying CPU resources. This loop would have to be replicated in every driver which wants to utilize this mechanism. That's unwanted code duplication and error prone. In order to move this into generic facilities it is required to have a mechanism, which allows the recalculation of the interrupt sets and their size, in the core code. As the core code does not have any knowledge about the underlying device, a driver specific callback will be added to struct affinity_desc, which will be invoked by the core code. The callback will get the number of available interupts as an argument, so the driver can calculate the corresponding number and size of interrupt sets. To support this, two modifications for the handling of struct irq_affinity are required: 1) The (optional) interrupt sets size information is contained in a separate array of integers and struct irq_affinity contains a pointer to it. This is cumbersome and as the maximum number of interrupt sets is small, there is no reason to have separate storage. Moving the size array into struct affinity_desc avoids indirections and makes the code simpler. 2) At the moment the struct irq_affinity pointer which is handed in from the driver and passed through to several core functions is marked 'const'. With the upcoming callback to recalculate the number and size of interrupt sets, it's necessary to remove the 'const' qualifier. Otherwise the callback would not be able to update the data. Implement #1 and store the interrupt sets size in 'struct irq_affinity'. No functional change. [ tglx: Fixed the memcpy() size so it won't copy beyond the size of the source. Fixed the kernel doc comments for struct irq_affinity and de-'This patch'-ed the changelog ] Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Bjorn Helgaas <helgaas@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Cc: Sagi Grimberg <sagi@grimberg.me> Cc: linux-nvme@lists.infradead.org Cc: linux-pci@vger.kernel.org Cc: Keith Busch <keith.busch@intel.com> Cc: Sumit Saxena <sumit.saxena@broadcom.com> Cc: Kashyap Desai <kashyap.desai@broadcom.com> Cc: Shivasharan Srikanteshwara <shivasharan.srikanteshwara@broadcom.com> Link: https://lkml.kernel.org/r/20190216172228.423723127@linutronix.de |
||
|
Thomas Gleixner
|
0145c30e89 |
genirq/affinity: Code consolidation
All information and calculations in the interrupt affinity spreading code is strictly unsigned int. Though the code uses int all over the place. Convert it over to unsigned int. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Bjorn Helgaas <helgaas@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Cc: Sagi Grimberg <sagi@grimberg.me> Cc: linux-nvme@lists.infradead.org Cc: linux-pci@vger.kernel.org Cc: Keith Busch <keith.busch@intel.com> Cc: Sumit Saxena <sumit.saxena@broadcom.com> Cc: Kashyap Desai <kashyap.desai@broadcom.com> Cc: Shivasharan Srikanteshwara <shivasharan.srikanteshwara@broadcom.com> Link: https://lkml.kernel.org/r/20190216172228.336424556@linutronix.de |
||
|
Julien Thierry
|
4b078c3f1a |
genirq: Provide NMI management for percpu_devid interrupts
Add support for percpu_devid interrupts treated as NMIs. Percpu_devid NMIs need to be setup/torn down on each CPU they target. The same restrictions as for global NMIs still apply for percpu_devid NMIs. Signed-off-by: Julien Thierry <julien.thierry@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> |
||
|
Julien Thierry
|
b525903c25 |
genirq: Provide basic NMI management for interrupt lines
Add functionality to allocate interrupt lines that will deliver IRQs as Non-Maskable Interrupts. These allocations are only successful if the irqchip provides the necessary support and allows NMI delivery for the interrupt line. Interrupt lines allocated for NMI delivery must be enabled/disabled through enable_nmi/disable_nmi_nosync to keep their state consistent. To treat a PERCPU IRQ as NMI, the interrupt must not be shared nor threaded, the irqchip directly managing the IRQ must be the root irqchip and the irqchip cannot be behind a slow bus. Signed-off-by: Julien Thierry <julien.thierry@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> |
||
|
Jonathan Corbet
|
70921ae25f |
genirq: Fix the kerneldoc comment for struct irq_affinity_desc
A recent commit added a new field but did not update the kerneldoc comment,
leading to this build warning:
./include/linux/interrupt.h:268: warning: Function parameter or member 'is_managed' not described in 'irq_affinity_desc'
Add the missing information, making the docs build 0.001% quieter.
Fixes:
|
||
|
Dou Liyang
|
c410abbbac |
genirq/affinity: Add is_managed to struct irq_affinity_desc
Devices which use managed interrupts usually have two classes of interrupts: - Interrupts for multiple device queues - Interrupts for general device management Currently both classes are treated the same way, i.e. as managed interrupts. The general interrupts get the default affinity mask assigned while the device queue interrupts are spread out over the possible CPUs. Treating the general interrupts as managed is both a limitation and under certain circumstances a bug. Assume the following situation: default_irq_affinity = 4..7 So if CPUs 4-7 are offlined, then the core code will shut down the device management interrupts because the last CPU in their affinity mask went offline. It's also a limitation because it's desired to allow manual placement of the general device interrupts for various reasons. If they are marked managed then the interrupt affinity setting from both user and kernel space is disabled. That limitation was reported by Kashyap and Sumit. Expand struct irq_affinity_desc with a new bit 'is_managed' which is set for truly managed interrupts (queue interrupts) and cleared for the general device interrupts. [ tglx: Simplify code and massage changelog ] Reported-by: Kashyap Desai <kashyap.desai@broadcom.com> Reported-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Dou Liyang <douliyangs@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-pci@vger.kernel.org Cc: shivasharan.srikanteshwara@broadcom.com Cc: ming.lei@redhat.com Cc: hch@lst.de Cc: bhelgaas@google.com Cc: douliyang1@huawei.com Link: https://lkml.kernel.org/r/20181204155122.6327-3-douliyangs@gmail.com |
||
|
Dou Liyang
|
bec04037e4 |
genirq/core: Introduce struct irq_affinity_desc
The interrupt affinity management uses straight cpumask pointers to convey the automatically assigned affinity masks for managed interrupts. The core interrupt descriptor allocation also decides based on the pointer being non NULL whether an interrupt is managed or not. Devices which use managed interrupts usually have two classes of interrupts: - Interrupts for multiple device queues - Interrupts for general device management Currently both classes are treated the same way, i.e. as managed interrupts. The general interrupts get the default affinity mask assigned while the device queue interrupts are spread out over the possible CPUs. Treating the general interrupts as managed is both a limitation and under certain circumstances a bug. Assume the following situation: default_irq_affinity = 4..7 So if CPUs 4-7 are offlined, then the core code will shut down the device management interrupts because the last CPU in their affinity mask went offline. It's also a limitation because it's desired to allow manual placement of the general device interrupts for various reasons. If they are marked managed then the interrupt affinity setting from both user and kernel space is disabled. To remedy that situation it's required to convey more information than the cpumasks through various interfaces related to interrupt descriptor allocation. Instead of adding yet another argument, create a new data structure 'irq_affinity_desc' which for now just contains the cpumask. This struct can be expanded to convey auxilliary information in the next step. No functional change, just preparatory work. [ tglx: Simplified logic and clarified changelog ] Suggested-by: Thomas Gleixner <tglx@linutronix.de> Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Dou Liyang <douliyangs@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-pci@vger.kernel.org Cc: kashyap.desai@broadcom.com Cc: shivasharan.srikanteshwara@broadcom.com Cc: sumit.saxena@broadcom.com Cc: ming.lei@redhat.com Cc: hch@lst.de Cc: douliyang1@huawei.com Link: https://lkml.kernel.org/r/20181204155122.6327-2-douliyangs@gmail.com |
||
|
Jens Axboe
|
6da4b3ab9a |
genirq/affinity: Add support for allocating interrupt sets
A driver may have a need to allocate multiple sets of MSI/MSI-X interrupts, and have them appropriately affinitized. Add support for defining a number of sets in the irq_affinity structure, of varying sizes, and get each set affinitized correctly across the machine. [ tglx: Minor changelog tweaks ] Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Cc: linux-block@vger.kernel.org Link: https://lkml.kernel.org/r/20181102145951.31979-5-ming.lei@redhat.com |
||
|
Geert Uytterhoeven
|
b8d62f33b7 |
genirq: Fix grammar s/an /a /
Fix a grammar mistake in <linux/interrupt.h>. [ mingo: While at it also fix another similar error in another comment as well. ] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Jiri Kosina <trivial@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20181008111726.26286-1-geert%2Brenesas@glider.be Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Frederic Weisbecker
|
48bda43eab |
softirq/s390: Move default mutators of overwritten softirq mask to s390
s390 is now the last architecture that entirely overwrites local_softirq_pending() and uses the according default definitions of set_softirq_pending() and or_softirq_pending(). Just move these to s390 to debloat the generic code complexity. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David S. Miller <davem@davemloft.net> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: James E.J. Bottomley <jejb@parisc-linux.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Rich Felker <dalias@libc.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/1525786706-22846-12-git-send-email-frederic@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Frederic Weisbecker
|
0fd7d86285 |
softirq/core: Consolidate default local_softirq_pending() implementations
Consolidate and optimize default softirq mask API implementations. Per-CPU operations are expected to be faster and a few architectures already rely on them to implement local_softirq_pending() and related accessors/mutators. Those will be migrated to the new generic code. Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David S. Miller <davem@davemloft.net> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: James E.J. Bottomley <jejb@parisc-linux.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Rich Felker <dalias@libc.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/1525786706-22846-6-git-send-email-frederic@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Randy Dunlap
|
562c45d635 |
headers: Drop two #included headers from <linux/interrupt.h>
It seems that <linux/interrupt.h> does not need <linux/linkage.h> nor <linux/preempt.h>. 8 kernels builds are successful without these 2 headers (allmodconfig, allyesconfig, allnoconfig, and tinyconfig on both i386 and x86_64). <linux/interrupt.h> is #included 3875 times in 4.16-rc1, so this reduces #include processing of these 2 files by a total of 7750 times. Since I only tested x86 builds, this needs to be tested on other $ARCHes as well. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Link: http://lkml.kernel.org/r/b24b9ec8-4970-65f5-759a-911d4ba2fcf0@infradead.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Levin, Alexander (Sasha Levin)
|
4675ff05de |
kmemcheck: rip it out
Fix up makefiles, remove references, and git rm kmemcheck. Link: http://lkml.kernel.org/r/20171007030159.22241-4-alexander.levin@verizon.com Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Vegard Nossum <vegardno@ifi.uio.no> Cc: Pekka Enberg <penberg@kernel.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexander Potapenko <glider@google.com> Cc: Tim Hansen <devtimhansen@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Greg Kroah-Hartman
|
b24413180f |
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Masami Hiramatsu
|
229a718605 |
irq: Make the irqentry text section unconditional
Generate irqentry and softirqentry text sections without any Kconfig dependencies. This will add extra sections, but there should be no performace impact. Suggested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Chris Zankel <chris@zankel.net> Cc: David S . Miller <davem@davemloft.net> Cc: Francis Deslauriers <francis.deslauriers@efficios.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: linux-arch@vger.kernel.org Cc: linux-cris-kernel@axis.com Cc: mathieu.desnoyers@efficios.com Link: http://lkml.kernel.org/r/150172789110.27216.3955739126693102122.stgit@devbox Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Linus Torvalds
|
7cb328c30a |
Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner: - A few fixes mopping up the fallout of the big irq overhaul - Move the interrupt resource management logic out of the spin locked, irq disabled region to avoid unnecessary restrictions of the resource callbacks - Preparation for reworking the per cpu irq request function. * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqdomain: Allow ACPI device nodes to be used as irqdomain identifiers genirq/debugfs: Remove redundant NULL pointer check genirq: Allow to pass the IRQF_TIMER flag with percpu irq request genirq/timings: Move free timings out of spinlocked region genirq: Move irq resource handling out of spinlocked region genirq: Add mutex to irq desc to serialize request/free_irq() genirq: Move bus locking into __setup_irq() genirq: Force inlining of __irq_startup_managed to prevent build failure genirq/debugfs: Fix build for !CONFIG_IRQ_DOMAIN |
||
|
Linus Torvalds
|
f263fbb8d6 |
Merge tag 'pci-v4.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
- add sysfs max_link_speed/width, current_link_speed/width (Wong Vee
Khee)
- make host bridge IRQ mapping much more generic (Matthew Minter,
Lorenzo Pieralisi)
- convert most drivers to pci_scan_root_bus_bridge() (Lorenzo
Pieralisi)
- mutex sriov_configure() (Jakub Kicinski)
- mutex pci_error_handlers callbacks (Christoph Hellwig)
- split ->reset_notify() into ->reset_prepare()/reset_done()
(Christoph Hellwig)
- support multiple PCIe portdrv interrupts for MSI as well as MSI-X
(Gabriele Paoloni)
- allocate MSI/MSI-X vector for Downstream Port Containment (Gabriele
Paoloni)
- fix MSI IRQ affinity pre/post/min_vecs issue (Michael Hernandez)
- test INTx masking during enumeration, not at run-time (Piotr Gregor)
- avoid using device_may_wakeup() for runtime PM (Rafael J. Wysocki)
- restore the status of PCI devices across hibernation (Chen Yu)
- keep parent resources that start at 0x0 (Ard Biesheuvel)
- enable ECRC only if device supports it (Bjorn Helgaas)
- restore PRI and PASID state after Function-Level Reset (CQ Tang)
- skip DPC event if device is not present (Keith Busch)
- check domain when matching SMBIOS info (Sujith Pandel)
- mark Intel XXV710 NIC INTx masking as broken (Alex Williamson)
- avoid AMD SB7xx EHCI USB wakeup defect (Kai-Heng Feng)
- work around long-standing Macbook Pro poweroff issue (Bjorn Helgaas)
- add Switchtec "running" status flag (Logan Gunthorpe)
- fix dra7xx incorrect RW1C IRQ register usage (Arvind Yadav)
- modify xilinx-nwl IRQ chip for legacy interrupts (Bharat Kumar
Gogada)
- move VMD SRCU cleanup after bus, child device removal (Jon Derrick)
- add Faraday clock handling (Linus Walleij)
- configure Rockchip MPS and reorganize (Shawn Lin)
- limit Qualcomm TLP size to 2K (hardware issue) (Srinivas Kandagatla)
- support Tegra MSI 64-bit addressing (Thierry Reding)
- use Rockchip normal (not privileged) register bank (Shawn Lin)
- add HiSilicon Kirin SoC PCIe controller driver (Xiaowei Song)
- add Sigma Designs Tango SMP8759 PCIe controller driver (Marc
Gonzalez)
- add MediaTek PCIe host controller support (Ryder Lee)
- add Qualcomm IPQ4019 support (John Crispin)
- add HyperV vPCI protocol v1.2 support (Jork Loeser)
- add i.MX6 regulator support (Quentin Schulz)
* tag 'pci-v4.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (113 commits)
PCI: tango: Add Sigma Designs Tango SMP8759 PCIe host bridge support
PCI: Add DT binding for Sigma Designs Tango PCIe controller
PCI: rockchip: Use normal register bank for config accessors
dt-bindings: PCI: Add documentation for MediaTek PCIe
PCI: Remove __pci_dev_reset() and pci_dev_reset()
PCI: Split ->reset_notify() method into ->reset_prepare() and ->reset_done()
PCI: xilinx: Make of_device_ids const
PCI: xilinx-nwl: Modify IRQ chip for legacy interrupts
PCI: vmd: Move SRCU cleanup after bus, child device removal
PCI: vmd: Correct comment: VMD domains start at 0x10000, not 0x1000
PCI: versatile: Add local struct device pointers
PCI: tegra: Do not allocate MSI target memory
PCI: tegra: Support MSI 64-bit addressing
PCI: rockchip: Use local struct device pointer consistently
PCI: rockchip: Check for clk_prepare_enable() errors during resume
MAINTAINERS: Remove Wenrui Li as Rockchip PCIe driver maintainer
PCI: rockchip: Configure RC's MPS setting
PCI: rockchip: Reconfigure configuration space header type
PCI: rockchip: Split out rockchip_pcie_cfg_configuration_accesses()
PCI: rockchip: Move configuration accesses into rockchip_pcie_cfg_atu()
...
|
||
|
Daniel Lezcano
|
c80081b920 |
genirq: Allow to pass the IRQF_TIMER flag with percpu irq request
The irq timings infrastructure tracks when interrupts occur in order to statistically predict te next interrupt event. There is no point to track timer interrupts and try to predict them because the next expiration time is already known. This can be avoided via the IRQF_TIMER flag which is passed by timer drivers in request_irq(). It marks the interrupt as timer based which alloes to ignore these interrupts in the timings code. Per CPU interrupts which are requested via request_percpu_+irq() have no flag argument, so marking per cpu timer interrupts is not possible and they get tracked pointlessly. Add __request_percpu_irq() as a variant of request_percpu_irq() with a flags argument and make request_percpu_irq() an inline wrapper passing flags = 0. The flag parameter is restricted to IRQF_TIMER as all other IRQF_ flags make no sense for per cpu interrupts. The next step is to convert all existing users of request_percpu_irq() and then remove the wrapper and the underscores. [ tglx: Massaged changelog ] Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: peterz@infradead.org Cc: nicolas.pitre@linaro.org Cc: vincent.guittot@linaro.org Cc: rafael@kernel.org Link: http://lkml.kernel.org/r/1499344144-3964-1-git-send-email-daniel.lezcano@linaro.org |
||
|
Daniel Lezcano
|
e1c9214955 |
genirq/timings: Add infrastructure for estimating the next interrupt arrival time
An interrupt behaves with a burst of activity with periodic interval of time followed by one or two peaks of longer interval. As the time intervals are periodic, statistically speaking they follow a normal distribution and each interrupts can be tracked individually. Add a mechanism to compute the statistics on all interrupts, except the timers which are deterministic from a prediction point of view, as their expiry time is known. The goal is to extract the periodicity for each interrupt, with the last timestamp and sum them, so the next event can be predicted to a certain extent. Taking the earliest prediction gives the expected wakeup on the system (assuming a timer won't expire before). Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Hannes Reinecke <hare@suse.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: "Rafael J . Wysocki" <rafael@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Link: http://lkml.kernel.org/r/1498227072-5980-2-git-send-email-daniel.lezcano@linaro.org |
||
|
Daniel Lezcano
|
b2d3d61adb |
genirq/timings: Add infrastructure to track the interrupt timings
The interrupt framework gives a lot of information about each interrupt. It does not keep track of when those interrupts occur though, which is a prerequisite for estimating the next interrupt arrival for power management purposes. Add a mechanism to record the timestamp for each interrupt occurrences in a per-CPU circular buffer to help with the prediction of the next occurrence using a statistical model. Each CPU can store up to IRQ_TIMINGS_SIZE events <irq, timestamp>, the current value of IRQ_TIMINGS_SIZE is 32. Each event is encoded into a single u64, where the high 48 bits are used for the timestamp and the low 16 bits are for the irq number. A static key is introduced so when the irq prediction is switched off at runtime, the overhead is near to zero. It results in most of the code in internals.h for inline reasons and a very few in the new file timings.c. The latter will contain more in the next patch which will provide the statistical model for the next event prediction. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Hannes Reinecke <hare@suse.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: "Rafael J . Wysocki" <rafael@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Link: http://lkml.kernel.org/r/1498227072-5980-1-git-send-email-daniel.lezcano@linaro.org |
||
|
Michael Hernandez
|
6f9a22bc57 |
PCI/MSI: Ignore affinity if pre/post vector count is more than min_vecs
min_vecs is the minimum amount of vectors needed to operate in MSI-X mode
which may just include the vectors that don't need affinity.
Disabling affinity settings causes the qla2xxx driver scsi_add_host() to fail
when blk_mq is enabled as the blk_mq_pci_map_queues() expects affinity masks
on each vector.
Fixes:
|
||
|
Christoph Hellwig
|
25ce4be724 |
genirq: Return the IRQ name from free_irq()
This allows callers to get back at them instead of having to store it in another variable. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> |
||
|
Christoph Hellwig
|
67c93c218d |
genirq/affinity: Handle pre/post vectors in irq_create_affinity_masks()
Only calculate the affinity for the main I/O vectors, and skip the pre or post vectors specified by struct irq_affinity. Also remove the irq_affinity cpumask argument that has never been used. If we ever need it in the future we can pass it through struct irq_affinity. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Cc: linux-pci@vger.kernel.org Link: http://lkml.kernel.org/r/1478654107-7384-4-git-send-email-hch@lst.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
||
|
Christoph Hellwig
|
212bd84622 |
genirq/affinity: Handle pre/post vectors in irq_calc_affinity_vectors()
Only calculate the affinity for the main I/O vectors, and skip the pre or post vectors specified by struct irq_affinity. Also remove the irq_affinity cpumask argument that has never been used. If we ever need it in the future we can pass it through struct irq_affinity. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Cc: linux-pci@vger.kernel.org Link: http://lkml.kernel.org/r/1478654107-7384-3-git-send-email-hch@lst.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
||
|
Christoph Hellwig
|
20e407e195 |
genirq/affinity: Introduce struct irq_affinity
Some drivers (various network and RDMA adapter for example) have a MSI-X vector layout where most of the vectors are used for I/O queues and should have CPU affinity assigned to them, but some (usually 1 but sometimes more) at the beginning or end are used for low-performance admin or configuration work and should not have any explicit affinity assigned to them. Add a new irq_affinity structure, which will be passed through a variant of pci_irq_alloc_vectors that allows to specify these requirements (and is extensible to any future quirks in that area) so that the core IRQ affinity algorithm can take this quirks into account. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Cc: linux-pci@vger.kernel.org Link: http://lkml.kernel.org/r/1478654107-7384-2-git-send-email-hch@lst.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
||
|
Thomas Gleixner
|
44082fd670 |
genirq/affinity: Remove old irq spread infrastructure
No more users. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Christoph Hellwig <hch@lst.de> Cc: axboe@fb.com Cc: keith.busch@intel.com Cc: agordeev@redhat.com Cc: linux-block@vger.kernel.org Link: http://lkml.kernel.org/r/1473862739-15032-5-git-send-email-hch@lst.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
||
|
Thomas Gleixner
|
34c3d9819f |
genirq/affinity: Provide smarter irq spreading infrastructure
The current irq spreading infrastructure is just looking at a cpumask and tries to spread the interrupts over the mask. Thats suboptimal as it does not take numa nodes into account. Change the logic so the interrupts are spread across numa nodes and inside the nodes. If there are more cpus than vectors per node, then we set the affinity to several cpus. If HT siblings are available we take that into account and try to set all siblings to a single vector. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Christoph Hellwig <hch@lst.de> Cc: axboe@fb.com Cc: keith.busch@intel.com Cc: agordeev@redhat.com Cc: linux-block@vger.kernel.org Link: http://lkml.kernel.org/r/1473862739-15032-3-git-send-email-hch@lst.de |
||
|
Christoph Hellwig
|
5e385a6ef3 |
genirq: Add a helper to spread an affinity mask for MSI/MSI-X vectors
This is lifted from the blk-mq code and adopted to use the affinity mask concept just introduced in the irq handling code. It tries to keep the algorithm the same as the one current used by blk-mq, but improvements like assining vectors on a per-node basis instead of just per sibling are possible with this simple move and refactoring. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: linux-block@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: linux-nvme@lists.infradead.org Cc: axboe@fb.com Cc: agordeev@redhat.com Link: http://lkml.kernel.org/r/1467621574-8277-7-git-send-email-hch@lst.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
||
|
Alexander Potapenko
|
be7635e728 |
arch, ftrace: for KASAN put hard/soft IRQ entries into separate sections
KASAN needs to know whether the allocation happens in an IRQ handler. This lets us strip everything below the IRQ entry point to reduce the number of unique stack traces needed to be stored. Move the definition of __irq_entry to <linux/interrupt.h> so that the users don't need to pull in <linux/ftrace.h>. Also introduce the __softirq_entry macro which is similar to __irq_entry, but puts the corresponding functions to the .softirqentry.text section. Signed-off-by: Alexander Potapenko <glider@google.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Chen Fan
|
e237a55184 |
x86/ACPI/PCI: Recognize that Interrupt Line 255 means "not connected"
Per the x86-specific footnote to PCI spec r3.0, sec 6.2.4, the value 255 in
the Interrupt Line register means "unknown" or "no connection."
Previously, when we couldn't derive an IRQ from the _PRT, we fell back to
using the value from Interrupt Line as an IRQ. It's questionable whether
we should do that at all, but the spec clearly suggests we shouldn't do it
for the value 255 on x86.
Calling request_irq() with IRQ 255 may succeed, but the driver won't
receive any interrupts. Or, if IRQ 255 is shared with another device, it
may succeed, and the driver's ISR will be called at random times when the
*other* device interrupts. Or it may fail if another device is using IRQ
255 with incompatible flags. What we *want* is for request_irq() to fail
predictably so the driver can fall back to polling.
On x86, assume 255 in the Interrupt Line means the INTx line is not
connected. In that case, set dev->irq to IRQ_NOTCONNECTED so request_irq()
will fail gracefully with -ENOTCONN.
We found this problem on a system where Secure Boot firmware assigned
Interrupt Line 255 to an i801_smbus device and another device was already
using MSI-X IRQ 255. This was in v3.10, where i801_probe() fails if
request_irq() fails:
i801_smbus 0000:00:1f.3: enabling device (0140 -> 0143)
i801_smbus 0000:00:1f.3: can't derive routing for PCI INT C
i801_smbus 0000:00:1f.3: PCI INT C: no GSI
genirq: Flags mismatch irq 255. 00000080 (i801_smbus) vs. 00000000 (megasa)
CPU: 0 PID: 2487 Comm: kworker/0:1 Not tainted 3.10.0-229.el7.x86_64 #1
Hardware name: FUJITSU PRIMEQUEST 2800E2/D3736, BIOS PRIMEQUEST 2000 Serie5
Call Trace:
dump_stack+0x19/0x1b
__setup_irq+0x54a/0x570
request_threaded_irq+0xcc/0x170
i801_probe+0x32f/0x508 [i2c_i801]
local_pci_probe+0x45/0xa0
i801_smbus 0000:00:1f.3: Failed to allocate irq 255: -16
i801_smbus: probe of 0000:00:1f.3 failed with error -16
After
|
||
|
Linus Torvalds
|
048ccca8c1 |
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma updates from Doug Ledford:
"Initial roundup of 4.5 merge window patches
- Remove usage of ib_query_device and instead store attributes in
ib_device struct
- Move iopoll out of block and into lib, rename to irqpoll, and use
in several places in the rdma stack as our new completion queue
polling library mechanism. Update the other block drivers that
already used iopoll to use the new mechanism too.
- Replace the per-entry GID table locks with a single GID table lock
- IPoIB multicast cleanup
- Cleanups to the IB MR facility
- Add support for 64bit extended IB counters
- Fix for netlink oops while parsing RDMA nl messages
- RoCEv2 support for the core IB code
- mlx4 RoCEv2 support
- mlx5 RoCEv2 support
- Cross Channel support for mlx5
- Timestamp support for mlx5
- Atomic support for mlx5
- Raw QP support for mlx5
- MAINTAINERS update for mlx4/mlx5
- Misc ocrdma, qib, nes, usNIC, cxgb3, cxgb4, mlx4, mlx5 updates
- Add support for remote invalidate to the iSER driver (pushed
through the RDMA tree due to dependencies, acknowledged by nab)
- Update to NFSoRDMA (pushed through the RDMA tree due to
dependencies, acknowledged by Bruce)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (169 commits)
IB/mlx5: Unify CQ create flags check
IB/mlx5: Expose Raw Packet QP to user space consumers
{IB, net}/mlx5: Move the modify QP operation table to mlx5_ib
IB/mlx5: Support setting Ethernet priority for Raw Packet QPs
IB/mlx5: Add Raw Packet QP query functionality
IB/mlx5: Add create and destroy functionality for Raw Packet QP
IB/mlx5: Refactor mlx5_ib_qp to accommodate other QP types
IB/mlx5: Allocate a Transport Domain for each ucontext
net/mlx5_core: Warn on unsupported events of QP/RQ/SQ
net/mlx5_core: Add RQ and SQ event handling
net/mlx5_core: Export transport objects
IB/mlx5: Expose CQE version to user-space
IB/mlx5: Add CQE version 1 support to user QPs and SRQs
IB/mlx5: Fix data validation in mlx5_ib_alloc_ucontext
IB/sa: Fix netlink local service GFP crash
IB/srpt: Remove redundant wc array
IB/qib: Improve ipoib UD performance
IB/mlx4: Advertise RoCE v2 support
IB/mlx4: Create and use another QP1 for RoCEv2
IB/mlx4: Enable send of RoCE QP1 packets with IP/UDP headers
...
|
||
|
Christoph Hellwig
|
511cbce2ff |
irq_poll: make blk-iopoll available outside the block layer
The new name is irq_poll as iopoll is already taken. Better suggestions welcome. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> |