Reading the sysfs files pp_sclk_od and pp_mclk_od return the
percentage difference between the VBIOS-provided default
frequency and the current (possibly user-set) frequency in
the highest SCLK and MCLK DPM states, respectively.
Writing to these files provides an easy mechanism for
setting a higher-than-default maximum frequency. We
normally only allow values >= 0 to be written here.
However, with the addition of pp_od_clk_voltage, we now
allow users to set custom DPM tables. If they then set
the maximum DPM state to something less than the default,
later reads of pp_*_od should return a negative value.
The highest DPM state is now less than the VBIOS-provided
default, so the percentage is negative.
The math to calculate this was originally performed with
unsigned values, meaning reads that should return negative
values returned meaningless data. This patch corrects that
issue and normalizes how all of the calculations are done
across the various hwmgr types.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
I have a Thinkpad X220 Tablet in my hands that is losing vblank
interrupts whenever LP3 watermarks are used.
If I nudge the latency value written to the WM3 register just
by one in either direction the problem disappears. That to me
suggests that the punit will not enter the corrsponding
powersave mode (MPLL shutdown IIRC) unless the latency value
in the register matches exactly what we read from SSKPD. Ie.
it's not really a latency value but rather just a cookie
by which the punit can identify the desired power saving state.
On HSW/BDW this was changed such that we actually just write
the WM level number into those bits, which makes much more
sense given the observed behaviour.
We could try to handle this by disallowing LP3 watermarks
only when vblank interrupts are enabled but we'd first have
to prove that only vblank interrupts are affected, which
seems unlikely. Also we can't grab the wm mutex from the
vblank enable/disable hooks because those are called with
various spinlocks held. Thus we'd have to redesigne the
watermark locking. So to play it safe and keep the code
simple we simply disable LP3 watermarks on all SNB machines.
To do that we simply zero out the latency values for
watermark level 3, and we adjust the watermark computation
to check for that. The behaviour now matches that of the
g4x/vlv/skl wm code in the presence of a zeroed latency
value.
v2: s/USHRT_MAX/U32_MAX/ for consistency with the types (Chris)
Cc: stable@vger.kernel.org
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101269
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103713
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181114173440.6730-1-ville.syrjala@linux.intel.com
(cherry picked from commit 03981c6ebe)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
New features for 4.21:
amdgpu:
- Support for SDMA paging queue on vega
- Put compute EOP buffers into vram for better performance
- Share more code with amdkfd
- Support for scanout with DCC on gfx9
- Initial kerneldoc for DC
- Updated SMU firmware support for gfx8 chips
- Rework CSA handling for eventual support for preemption
- XGMI PSP support
- Clean up RLC handling
- Enable GPU reset by default on VI, SOC15 dGPUs
- Ring and IB test cleanups
amdkfd:
- Share more code with amdgpu
ttm:
- Move global init out of the drivers
scheduler:
- Track if schedulers are ready for work
- Timeout/fault handling changes to facilitate GPU recovery
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181114165113.3751-1-alexander.deucher@amd.com
drm-misc-next for v4.21, part 1:
UAPI Changes:
- Add syncobj timeline support to drm.
Cross-subsystem Changes:
- Remove shared fence staging in dma-buf's fence object, and allow
reserving more than 1 fence and add more paranoia when debugging.
- Constify infoframe functions in video/hdmi.
Core Changes:
- Add vkms todo, and a lot of assorted doc fixes.
- Drop transitional helpers and convert drivers to use drm_atomic_helper_shutdown().
- Move atomic state helper functions to drm_atomic_state_helper.[ch]
- Refactor drm selftests, and add new tests.
- DP MST atomic state cleanups.
- Drop EXPORT_SYMBOL from drm leases.
- Lease cleanups and fixes.
- Create render node for vgem.
Driver Changes:
- Fix build failure in imx without fbdev emulation.
- Add rotation quirk for GPD win2 panel.
- Add support for various CDTech panels, Banana Pi Panel, DLC1010GIG,
Olimex LCD-O-LinuXino, Samsung S6D16D0, Truly NT35597 WQXGA,
Himax HX8357D, simulated RTSM AEMv8.
- Add dw_hdmi support to rockchip driver.
- Fix YUV support in vc4.
- Fix resource id handling in virtio.
- Make rockchip use dw-mipi-dsi bridge driver, and add dual dsi support.
- Advertise that tinydrm only supports DRM_FORMAT_MOD_LINEAR.
- Convert many drivers to use atomic helpers, and drm_fbdev_generic_setup().
- Add Mali linear tiled formats, and enable them in the Mali-DP driver.
- Add support for H6 DE3 mixer 0, DW HDMI, HDMI PHY and TCON TOP.
- Assorted driver cleanups and fixes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/be7ebd91-edd9-8fa4-4286-1c57e3165113@linux.intel.com
If vesafb attaches to the AST device, it configures the framebuffer memory
for uncached access by default. When ast.ko later tries to attach itself to
the device, it wants to use write-combining on the framebuffer memory, but
vesefb's existing configuration for uncached access takes precedence. This
results in reduced performance.
Removing the framebuffer's configuration before loding the AST driver fixes
the problem. Other DRM drivers already contain equivalent code.
Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1112963
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: <stable@vger.kernel.org>
Tested-by: Y.C. Chen <yc_chen@aspeedtech.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Tested-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
I have a Thinkpad X220 Tablet in my hands that is losing vblank
interrupts whenever LP3 watermarks are used.
If I nudge the latency value written to the WM3 register just
by one in either direction the problem disappears. That to me
suggests that the punit will not enter the corrsponding
powersave mode (MPLL shutdown IIRC) unless the latency value
in the register matches exactly what we read from SSKPD. Ie.
it's not really a latency value but rather just a cookie
by which the punit can identify the desired power saving state.
On HSW/BDW this was changed such that we actually just write
the WM level number into those bits, which makes much more
sense given the observed behaviour.
We could try to handle this by disallowing LP3 watermarks
only when vblank interrupts are enabled but we'd first have
to prove that only vblank interrupts are affected, which
seems unlikely. Also we can't grab the wm mutex from the
vblank enable/disable hooks because those are called with
various spinlocks held. Thus we'd have to redesigne the
watermark locking. So to play it safe and keep the code
simple we simply disable LP3 watermarks on all SNB machines.
To do that we simply zero out the latency values for
watermark level 3, and we adjust the watermark computation
to check for that. The behaviour now matches that of the
g4x/vlv/skl wm code in the presence of a zeroed latency
value.
v2: s/USHRT_MAX/U32_MAX/ for consistency with the types (Chris)
Cc: stable@vger.kernel.org
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101269
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103713
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181114173440.6730-1-ville.syrjala@linux.intel.com
[Why]
Many panels support more than 8bpc but some modes are unavailable while
running at greater than 8bpc due to DP/HDMI bandwidth constraints.
Support for more than 8bpc was added recently in the driver but it
defaults to the maximum supported bpc - locking out these modes.
This should be a user configurable option such that the user can select
what bpc configuration they would like.
[How]
This patch adds support for getting and setting the amdgpu driver
specific "max bpc" property on the connector.
It also adds support for limiting the output bpc based on the property
value. The default limitation is the lowest value in the range, 8bpc.
This was the old value before the range was uncapped.
This patch should be updated/replaced later once common drm support
for max bpc lands.
Bugzilla: https://bugs.freedesktop.org/108542
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201585
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200645
Fixes: e03fd3f300 ("drm/amd/display: Do not limit color depth to 8bpc")
v2: rebase on upstream (Alex)
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Many panels support more than 8bpc but some modes are unavailable while
running at greater than 8bpc due to DP/HDMI bandwidth constraints.
Support for more than 8bpc was added recently in the driver but it
defaults to the maximum supported bpc - locking out these modes.
This should be a user configurable option such that the user can select
what bpc configuration they would like.
[How]
This patch introduces the "max bpc" amdgpu driver specific connector
property so the user can limit the maximum bpc. It ranges from 8 to 16.
This doesn't directly set the preferred bpc for the panel since it
follows Intel's existing driver conventions.
This proprety should be removed once common drm support for max bpc
lands.
v2: rebase on upstream (Alex)
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
vc4_plane_atomic_async_update() calls vc4_plane_atomic_check()
which in turn calls vc4_plane_setup_clipping_and_scaling(), and since
commit 58a6a36fe8 ("drm/vc4: Use
drm_atomic_helper_check_plane_state() to simplify the logic"), this
function accesses plane_state->state which will be NULL when called
from the async update path because we're passing the current plane
state, and plane_state->state has been assigned to NULL in
drm_atomic_helper_swap_state().
Pass the new state instead of the current one (the new state has
->state set to a non-NULL value).
Fixes: 58a6a36fe8 ("drm/vc4: Use drm_atomic_helper_check_plane_state() to simplify the logic")
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181115105852.9844-1-boris.brezillon@bootlin.com
While adding SiI9022A support to the iwg23s board, it came
up that when the HDMI transmitter is in pass through mode the
device is not compliant with the I2C specification anymore,
as it requires a far bigger tbuf, due to a delay the HDMI
transmitter is adding when relaying the STOP condition on the
monitor i2c side of things.
When not providing an appropriate delay after the STOP condition
the i2c bus would get stuck. Also, any other traffic on the bus
while talking to the monitor may cause the transaction to fail
or even cause issues with the i2c bus as well.
I2c-gates seemed to reach consent as a possible way to address
these issues, and as such this patch is implementing a solution
based on that. Since others are clearly relying on the current
implementation of the driver, this patch won't require any DT
changes.
Since we don't want any interference during the DDC Bus
Request/Grant procedure and while talking to the monitor, we
have to use the adapter locking primitives rather than the
i2c-mux locking primitives.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Peter Rosin <peda@axentia.se>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Yannick Fertré <yannick.fertre@st.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1541505156-8097-1-git-send-email-fabrizio.castro@bp.renesas.com
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/qxl/qxl_release.c: In function 'qxl_release_fence_buffer_objects':
drivers/gpu/drm/qxl/qxl_release.c:431:17: warning:
variable 'qbo' set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/qxl/qxl_release.c:430:24: warning:
variable 'driver' set but not used [-Wunused-but-set-variable]
'qbo' not used since commit f2c24b83ae ("drm/ttm: flip the switch, and convert
to dma_fence")
And 'driver' never used since introduction in
8002db6336 ("qxl: convert qxl driver to proper use for reservations")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1542029556-88107-1-git-send-email-yuehaibing@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a new field called fence_fd that will be used by userspace to send
in-fences to the kernel and receive out-fences created by the kernel.
This uapi enables virtio to take advantage of explicit synchronization of
dma-bufs.
There are two new flags:
* VIRTGPU_EXECBUF_FENCE_FD_IN to be used when passing an in-fence fd.
* VIRTGPU_EXECBUF_FENCE_FD_OUT to be used when requesting an out-fence fd
The execbuffer IOCTL is now read-write to allow the userspace to read the
out-fence.
On error -1 should be returned in the fence_fd field.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20181112165157.32765-3-robert.foss@collabora.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
A DMC bug on GEN9 big core machines fails to restore the driver's
request bits for the PW1 and MISC_IO power wells after a DC5/6
entry->exit sequence. As a consequence the driver's subsequent check for
the enabled status of these power wells will fail, as the check
considers the power wells being enabled only if both the status and
request bits are set. To work around this borrow the request bits from
BIOS's own request register in which DMC forces on the request bits when
exiting from DC5/6.
This fixes a problem reported by Ramalingam, where HDCP init failed,
since PW1 reported itself as being disabled, while in reality it was
enabled.
Reported-by: Ramalingam C <ramalingam.c@intel.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181109145822.15446-1-imre.deak@intel.com
