Pull ARM SoC fixes from Olof Johansson:
"A few fixes that have trickled in through the merge window:
- Video fixes for OMAP due to panel-dpi driver removal
- Clock fixes for OMAP that broke no-idle quirks + nfsroot on DRA7
- Fixing arch version on ASpeed ast2500
- Two fixes for reset handling on ARM SCMI"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: aspeed: ast2500 is ARMv6K
reset: reset-scmi: add missing handle initialisation
firmware: arm_scmi: reset: fix reset_state assignment in scmi_domain_reset
bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle()
ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux
ARM: dts: am3517-evm: Fix missing video
ARM: dts: logicpd-torpedo-baseboard: Fix missing video
ARM: omap2plus_defconfig: Fix missing video
bus: ti-sysc: Fix handling of invalid clocks
bus: ti-sysc: Fix clock handling for no-idle quirks
Fixes for omap variants
Few fixes for ti-sysc interconnect target module driver for no-idle
quirks that caused nfsroot to fail on some dra7 boards.
And let's fixes to get LCD working again for logicpd board that got
broken a while back with removal of panel-dpi driver. We need to now
use generic CONFIG_DRM_PANEL_SIMPLE instead.
* tag 'fixes-5.4-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle()
ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux
ARM: dts: am3517-evm: Fix missing video
ARM: dts: logicpd-torpedo-baseboard: Fix missing video
ARM: omap2plus_defconfig: Fix missing video
bus: ti-sysc: Fix handling of invalid clocks
bus: ti-sysc: Fix clock handling for no-idle quirks
Link: https://lore.kernel.org/r/pull-1568819401-72461@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Pull ARM SoC late updates from Arnd Bergmann:
"This is some material that we picked up into our tree late or that had
complex inter-depondencies. The fact that there are these
interdependencies tends to meant that these are often actually the
most interesting new additions:
- The new Aspeed AST2600 baseboard management controller is added,
this is a Cortex-A7 based follow-up to the ARM11 based AST2500 and
had some dependencies on other device drivers.
- After many years, support for the MMP2 based OLPC XO-1.75 finally
makes it into the kernel.
- The Armada 3720 based Turris Mox open source router platform is a
late addition and it follows some preparatory work across multiple
branches.
- The OMAP2+ platform had some large-scale cleanup involving driver
changes and DT changes, here we finish it off, dropping a lot of
the now-unused platform data.
- The TI K3 platform that got added for 5.3 gains a lot more support
for individual bits on the SoC, this part just came late for the
merge window"
[ This pull request itself wasn't actually sent late at all by Arnd, but
I waited on the branches that it used to be pulled first, so it ends
up being merged much later than the other ARM SoC pull requests this
merge window - Linus ]
* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (57 commits)
ARM: dts: dir685: Drop spi-cpol from the display
ARM: dts: aspeed: Add AST2600 pinmux nodes
ARM: dts: aspeed: Add AST2600 and EVB
ARM: exynos: Enable support for ARM architected timers
ARM: samsung: Fix system restart on S3C6410
ARM: dts: mmp2: add OLPC XO 1.75 machine
ARM: dts: mmp2: rename the USB PHY node
ARM: dts: mmp2: specify reg-shift for the UARTs
ARM: dts: mmp2: add camera interfaces
ARM: dts: mmp2: fix the SPI nodes
ARM: dts: mmp2: trivial whitespace fix
arm64: dts: marvell: add DTS for Turris Mox
dt-bindings: marvell: document Turris Mox compatible
arm64: dts: marvell: armada-37xx: add SPI CS1 pinctrl
arm64: dts: ti: k3-j721e-main: Fix gic-its node unit-address
arm64: dts: ti: k3-am65-main: Fix gic-its node unit-address
arm64: dts: ti: k3-j721e-main: Add hwspinlock node
arm64: dts: ti: k3-am65-main: Add hwspinlock node
arm64: dts: k3-j721e: Add gpio-keys on common processor board
dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721E
...
Pull USB updates from Greg KH:
"Here is the big set of USB patches for 5.4-rc1.
Two major chunks of code are moving out of the tree and into the
staging directory, uwb and wusb (wireless USB support), because there
are no devices that actually use this protocol anymore, and what we
have today probably doesn't work at all given that the maintainers
left many many years ago. So move it to staging where it will be
removed in a few releases if no one screams.
Other than that, lots of little things. The usual gadget and xhci and
usb serial driver updates, along with a bunch of sysfs file cleanups
due to the driver core changes to support that. Nothing really major,
just constant forward progress.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (159 commits)
USB: usbcore: Fix slab-out-of-bounds bug during device reset
usb: cdns3: Remove redundant dev_err call in cdns3_probe()
USB: rio500: Fix lockdep violation
USB: rio500: simplify locking
usb: mtu3: register a USB Role Switch for dual role mode
usb: common: add USB GPIO based connection detection driver
usb: common: create Kconfig file
usb: roles: get usb-role-switch from parent
usb: roles: Add fwnode_usb_role_switch_get() function
device connection: Add fwnode_connection_find_match()
usb: roles: Introduce stubs for the exiting functions in role.h
dt-bindings: usb: mtu3: add properties about USB Role Switch
dt-bindings: usb: add binding for USB GPIO based connection detection driver
dt-bindings: connector: add optional properties for Type-B
dt-binding: usb: add usb-role-switch property
usbip: Implement SG support to vhci-hcd and stub driver
usb: roles: intel: Enable static DRD mode for role switch
xhci-ext-caps.c: Add property to disable Intel SW switch
usb: dwc3: remove generic PHY calibrate() calls
usb: core: phy: add support for PHY calibration
...
Pull ARM DT updates from Arnd Bergmann:
"This is another huge branch with close to 450 changessets related to
devicetree files, roughly half of this for 32-bit and 64-bit
respectively. There are lots of cleanups and additional hardware
support for platforms we already support based on SoCs from Renesas,
ST-Microelectronics, Intel/Altera, Rockchips, Allwinner, Broadcom and
other manufacturers.
A total of 6 new SoCs and 37 new boards gets added this time, one more
SoC will come in a follow-up branch. Most of the new boards are for
64-bit ARM SoCs, the others are typically for the 32-bit Cortex-A7.
Going more into details for SoC platforms with new hardware support:
- The Snapdragon 855 (SM8150) is Qualcomm's current high-end phone
platform, usually paired with an external 5G modem. So far we only
support the Qualcomm SM8150 MTP reference platform, but no actual
products.
- For the slightly older Qualcomm platforms, support for several
interesting products is getting added: Three laptops based on
Snapdragon 835/MSM8998 (Asus NovaGo, HP Envy X2 and Lenovo Miix
630), one laptop based on Snapdragon 850/sdm850 (Lenovo Yoga C630)
and several phones based on the older Snapdragon 410/MSM8916
(Samsung A3 and A5, Longcheer L8150 aka Android One 2nd gen "seed"
aka Wileyfox Swift).
- Mediatek MT7629 is a new wireless network router chip, similar to
the older MT7623. It gets added together with the reference board
implementation.
- Allwinner V3 is a repackaged version of the existing low-end V3s
chip, and is used in the tiny Lichee Pi Zero plus, also added here.
There is also a new TV set-top box based on Allwinner H6, the Tanix
TX6, and the eMMC variant of the Olimex A64-Olinuxino development
board.
- NXP i.MX8M Nano is a new member of the ever-expanding i.MX SoC
family, similar to the i.MX8M Mini. As usual, there is a large
number of new boards for i.MX SoCs: Einfochips i.MX8QXP AI_ML,
SolidRun Hummingboard Pulse baseboard and System-on-Module,
Boundary Devices i.MX8MQ Nitrogen8M, and TechNexion
PICO-PI-IMX8M-DEV for the 64-bit i.MX8 line. For 32-bit, we get the
Kontron i.MX6UL N6310 SoM with two baseboards, the PHYTEC
phyBOARD-Segin SoM with three baseboards, and the Zodiac Inflight
Innovations i.MX7 RMU2 board.
- In a different NXP product line, the Layerscape LS1046A "Freeway"
reference board gets added.
- Amlogic SM1 (S905X3) and G12B (S922X, A311D) are updated chips from
their set-top-box line and smart speaker with newer CPU and GPU
cores compared to their predecessors. Both are now also supported
by the Khadas VIM3 development board series, and the dts files for
that get reorganized a bit to better deal with all variants.
Another board based on SM1 that gets added is the SEI Robotics
SEI610.
- There are a handful of new x86 and Power9 server boards using
Aspeed BMC chips that are gaining support for running Linux on the
BMC through the OpenBMC project: Facebook
Minipack/Wedge100/Wedge40, Lenovo Hr855xg2, and Mihawk. Notably
these are still new machines using SoCs based on the ARM9 and ARM11
CPU cores, as support for the new Cortex-A7 based AST2600 is still
ramping up.
- There are three new end-user products using 32-bit Rockchips SoCs:
Mecer Xtreme Mini S6 is an Android "mini PC" box based on the
low-end RK3229 chip, while the two AOpen products Chromebox Mini
(Fievel) and Chromebase Mini (Tiger) run ChromeOS and are meant for
commercial settings(digital signage, PoS, ...).
- One more single-board computer based on the popular 64-bit RK3399
is added: the Leez RK3399 P710"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (467 commits)
arm64: dts: qcom: Add Lenovo Yoga C630
ARM: dts: aspeed-g5: Fixe gpio-ranges upper limit
ARM; dts: aspeed: mihawk: File should not be executable
ARM: dts: aspeed: swift: Change power supplies to version 2
ARM: dts: aspeed: vesnin: Add secondary SPI flash chip
ARM: dts: aspeed: vesnin: Add wdt2 with alt-boot option
ARM: dts: aspeed-g4: Add all flash chips
ARM: dts: exynos: Enable GPU/Mali T604 on Arndale board
ARM: dts: exynos: Enable GPU/Mali T604 on Chromebook Snow
ARM: dts: exynos: Add GPU/Mali T604 node to Exynos5250
ARM: dts: exynos: Fix min/max buck4 for GPU on Arndale board
ARM: dts: exynos: Mark LDO10 as always-on on Peach Pit/Pi Chromebooks
ARM: dts: exynos: Remove not accurate secondary ADC compatible
arm64: dts: rockchip: limit clock rate of MMC controllers for RK3328
arm64: dts: meson-sm1-sei610: add stdout-path property back
arm64: dts: meson-sm1-sei610: enable DVFS
arm64: dts: khadas-vim3: add support for the SM1 based VIM3L
dt-bindings: arm: amlogic: add Amlogic SM1 based Khadas VIM3L bindings
arm64: dts: khadas-vim3: move common nodes into meson-khadas-vim3.dtsi
arm64: dts: meson: g12a: add reset to tdm formatters
...
The D-Link DIR-685 had its clock polarity set as active
low using the special SPI "spi-cpol" property.
This is not correct: the datasheet clearly states:
"Fix SCL to GND level when not in use" which is
indicative that this line is active high.
After a recent fix making the GPIO-based SPI driver
force the clock line de-asserted at the beginning of
each SPI transaction this reared its ugly head: now
de-asserted was taken to mean the line should be
driven high, but it should be driven low.
Fix this up in the DTS file and the display works again.
Link: https://lore.kernel.org/r/20190915135444.11066-1-linus.walleij@linaro.org
Cc: Mark Brown <broonie@kernel.org>
Fixes: 2922d1cc16 ("spi: gpio: Add SPI_MASTER_GPIO_SS flag")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is a fairly complete description of an OLPC XO 1.75 laptop.
What's missing for now is the GPU, LCD controller, DCON, the panel and
audio.
The machine is booted with OpenFirmware and thus has a devicetree.
However, older versions are unable to create a valid FDT and don't
follow the Linux bindings. Having an device tree in the kernel tree
makes it easier to use mainline kernels on such machines, test changes
with CONFIG_ARM_APPENDED_DTB and give a good reference on what bindings
are used on the machine without an access to one.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
This device is not an OTG phy, it's a regular USB HS phy. Follow the
generic node name recommendation, and rename it to "usb-phy".
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
This makes the 8250_of driver happy. There are two more drivers in the
tree that bind to mrvl,mmp-uart compatibles: pxa and 8250_pxa and
neither of them requires the reg-shift property, assuming it's always 2.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
The SPI bus has a single address cell and not size cells.
Also, dtc thinks the SPI nodes are preferrably called "spi" and it is
right to think so.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
When the pinmux configuration was added, it was accidentally placed into
the omap3_pmx_wkup node when it should have been placed into the
omap3_pmx_core. This error was accidentally propagated to stable by
me when I blindly requested the pull after seeing I2C issues without
actually reviewing the content of the pinout. Since the bootloader
previously muxed these correctly in the past, was a hidden error.
This patch moves the i2c2_pins and i2c3_pins to the correct node
which should eliminate i2c bus errors and timeouts due to the fact
the bootloader uses the save device tree that no longer properly
assigns these pins.
Fixes: 5fe3c0fa0d ("ARM: dts: Add pinmuxing for i2c2 and i2c3
for LogicPD SOM-LV") #4.9+
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
A previous commit removed the panel-dpi driver, which made the
video on the AM3517-evm stop working because it relied on the dpi
driver for setting video timings. Now that the simple-panel driver
is available in omap2plus, this patch migrates the am3517-evm
to use a similar panel and remove the manual timing requirements.
Fixes: 8bf4b16211 ("drm/omap: Remove panel-dpi driver")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
A previous commit removed the panel-dpi driver, which made the
Torpedo video stop working because it relied on the dpi driver
for setting video timings. Now that the simple-panel driver is
available in omap2plus, this patch migrates the Torpedo dev kits
to use a similar panel and remove the manual timing requirements.
Fixes: 8bf4b16211 ("drm/omap: Remove panel-dpi driver")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Removal of the rk3288-fennec board which never made it to
any market.
* tag 'v5.4-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
dt-bindings: arm: rockchip: remove reference to fennec board
ARM: dts: rockchip: remove rk3288 fennec board support
Link: https://lore.kernel.org/r/1718334.9BoTfW0Ujv@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ASPEED device tree updates for 5.4, second round
- Alternate flash support for Vesnin
- Minor cleanups and fixes
* tag 'aspeed-5.4-devicetree-2' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
ARM: dts: aspeed-g5: Fixe gpio-ranges upper limit
ARM; dts: aspeed: mihawk: File should not be executable
ARM: dts: aspeed: swift: Change power supplies to version 2
ARM: dts: aspeed: vesnin: Add secondary SPI flash chip
ARM: dts: aspeed: vesnin: Add wdt2 with alt-boot option
ARM: dts: aspeed-g4: Add all flash chips
Link: https://lore.kernel.org/r/CACPK8Xdp4gVuetmiu2bRTTH6oHhRrC7FELHWKVB2ZGSbPbH7HQ@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
According to the AST2500/AST2520 specs, these SoCs support up to 228 GPIO
pins. However, 'gpio-ranges' value in 'aspeed-g5.dtsi' file is currently
setting the upper limit to 220 which isn't allowing access to all their
GPIOs. The correct upper limit value is 232 (actual number is 228 plus a
4-GPIO hole in GPIOAB). Without this patch, GPIOs AC5 and AC6 do not work
correctly on a AST2500 BMC running Linux Kernel v4.19
Fixes: 2039f90d13 ("ARM: dts: aspeed-g5: Add gpio controller to devicetree")
Signed-off-by: Oscar A Perez <linux@neuralgames.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Swift power supplies are version 2 of the IBM CFFPS.
Fixes: 8e8fd0cbd7 ("ARM: dts: aspeed: Add Swift BMC machine")
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Adds wdt2 section with 'alt-boot' option into dts for vesnin.
Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
The FMC supports five chip selects, so describe the five possible flash
chips.
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Samsung DTS ARM changes for v5.4, part 2
1. Fix Exynos542x Chromebooks boot with multi_v7 defconfig,
2. Add GPU (Mali) support to Exynos5250 boards,
3. Minor cleanup for Exynos3250 ADC.
* tag 'samsung-dt-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Enable GPU/Mali T604 on Arndale board
ARM: dts: exynos: Enable GPU/Mali T604 on Chromebook Snow
ARM: dts: exynos: Add GPU/Mali T604 node to Exynos5250
ARM: dts: exynos: Fix min/max buck4 for GPU on Arndale board
ARM: dts: exynos: Mark LDO10 as always-on on Peach Pit/Pi Chromebooks
ARM: dts: exynos: Remove not accurate secondary ADC compatible
Link: https://lore.kernel.org/r/20190904175002.10487-4-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested with kmscube and some glmark2* tests on arndale board.
Signed-off-by: Guillaume Gardet <guillaume.gardet@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested with kmscube and some glmark2* tests on Chromebook snow.
Frequency adapts with load.
Signed-off-by: Guillaume Gardet <guillaume.gardet@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Required to have GPU voltage scaling working properly.
Signed-off-by: Guillaume Gardet <guillaume.gardet@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
SoC glue layer changes for SGX on omap variants for v5.4
For a while we've had omap4 sgx glue layer defined in dts and probed
with ti-sysc driver. This allows idling the sgx module for PM, and
removes the need for custom platform glue layer code for any further
driver changes.
We first drop the unused legacy platform data for omap4 sgx. Then for
omap5, we need add the missing clkctrl clock data so we can configure
sgx. And we configure sgx for omap34xx, omap36xx and am3517.
For am335x, we still have a dependency for rstctrl reset driver changes,
so that will be added later on.
Note that this branch is based on earlier ti-sysc branch for omap36xx
glue layer quirk handling.
* tag 'omap-for-v5.4/ti-sysc-sgx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: ARM: dts: Configure interconnect target module for am3517sgx
ARM: dts: Configure interconnect target module for omap3 sgx
ARM: dts: Configure sgx for omap5
clk: ti: add clkctrl data omap5 sgx
ARM: OMAP2+: Drop legacy platform data for omap4 gpu
Link: https://lore.kernel.org/r/pull-1567016893-318461@atomide.com-4
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Drop legacy platform data omap variants for v5.4
We can now drop more platform data in favor of dts data for most
devices like cpsw, gpio, i2c, mmc, uart and watchdog.
In general we can do this by dropping legacy "ti,hwmods" custom dts
property, and the platform data assuming the related dts data is correct.
This is best done as single patch as otherwise we'd have to revert two
patches in case of any unexpected issues, and we're just removing data.
Fro cpsw, before we can do this, we need to configure the cpsw mdio clocks
properly in dts though in the first patch. For omap4 i2c, we've already
dropped the platform data earlier, but have been still allocting it
dynamically based on the dts data based on the "ti,hwmods" property, but
that is no longer needed. For d2d, we are missing the dts data, so we
first add it and then drop the platform data.
For dra7, we drop platform data and "ti,hwmods" for mcasp and mcspi.
We've already dropped platform data earlier for gpio, i2c, mmc, and
uart so we just need to drop "ti,hwmods" property for those.
Note that this branch is based on earlier ti-sysc-fixes branch.
* tag 'omap-for-v5.4/ti-sysc-drop-pdata-take2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Drop legacy custom hwmods property for dra7 gpio
ARM: dts: Drop legacy custom hwmods property for dra7 mmc
ARM: dts: Drop legacy custom hwmods property for dra7 i2c
ARM: dts: Drop legacy custom hwmods property for dra7 uart
ARM: OMAP2+: Drop legacy platform data for dra7 mcasp
ARM: OMAP2+: Drop legacy platform data for dra7 mcspi
ARM: OMAP2+: Drop legacy platform data for omap4 d2d
ARM: dts: Configure d2d dts data for omap4
ARM: OMAP2+: Drop legacy watchdog platform data for omap4
ARM: dts: Drop custom hwmod property for omap4 i2c
ARM: OMAP2+: Drop legacy platform data for cpsw on dra7
ARM: OMAP2+: Drop legacy platform data for cpsw on am3 and am4
ARM: dts: Add fck for cpsw mdio for omap variants
Link: https://lore.kernel.org/r/pull-1567016893-318461@atomide.com-3
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This pull request contains Broadcom ARM-based SoCs Device Tree updates
for 5.4, please pull the following:
- Stefan does a bunch of preparatory work for supporting the Raspberry
Pi 4in the next merge window correct register ranges (SPI, I2C,
UART), define memory, HDMI and MMC properties at the board level
* tag 'arm-soc/for-5.4/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm283x: Enable HDMI at board level
ARM: dts: bcm283x: Define memory at board level
ARM: dts: bcm283x: Define MMC interfaces at board level
ARM: bcm283x: Reduce register ranges for UART, SPI and I2C
Contains a patch to switch to more generic compatible for SPI NOR.
This helps SPI NOR to work on newer board variants.
* tag 'davinci-for-v5.4/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: dts: da850-evm: Use generic jedec, spi-nor for flash
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
More Ux500 device tree updates for the v5.4 kernel:
- Drop TV-OUT muxgroup from the HREF pin control
- Fix up BU21013 touchpad from Dmitry
- Split of AB8500 config in its own DTSI
- Drop the unused USB regulator config
- Add proper thermal zone for the CPU
* tag 'ux500-dts-v5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
ARM: dts: ux500: Update thermal zone
ARM: dts: ux500: Remove ab8500_ldo_usb regulator from device tree
ARM: dts: ux500: Move ab8500 nodes to ste-ab8500.dtsi
ARM: ux500: improve BU21013 touchpad bindings
ARM: dts: ux500: Drop TV-out muxgroup on HREFs
Link: https://lore.kernel.org/r/CACRpkdZ9Xvx+rg-hFVgG61_i2CdQSs+nZq5FXkkK2-3Ce9ooWg@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
mvebu dt for 5.4 (part 1)
- Disable the kirkwood RTC that doesn't work on the ts219 board
* tag 'mvebu-dt-5.4-1' of git://git.infradead.org/linux-mvebu:
ARM: dts: kirkwood: ts219: disable the SoC's RTC
Link: https://lore.kernel.org/r/878srdzjpj.fsf@FE-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
i.MX arm32 device tree changes for 5.4:
- New board support: ZII i.MX7 RMU2, Kontron i.MX6UL N6310, and
PHYTEC phyBOARD-Segin based on i.MX6ULL.
- A series from Andrey Smirnov to update vf610-zii boards on I2C
pinmux, switch watchdog, GPIO expander IRQ.
- Move GIC node into soc node for i.MX6 SoCs.
- Add OV5645 camera support for imx6qdl-wandboard board.
- Drop unneeded snvs_pwrkey node for imx7d-zii-rpu2 and imx7-colibri.
- Use simple-mfd instead of simple-bus for i.MX6 ANATOP.
- Move the native-mode property inside the display-timings node for
various i.MX25 and i.MX27 boards.
- Add EDMA devices for i.MX7ULP SoC.
- A series from Stefan Riedmueller to update imx6ul-phytec-segin board
on various devices.
- Use OF graph to describe the display for opos6uldev board.
- Misc random updates on i.MX7/6 boards.
* tag 'imx-dt-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (53 commits)
ARM: dts: vf610-zii-scu4-aib: Configure IRQ line for GPIO expander
ARM: dts: imx6ul-kontron-n6310: Add Kontron i.MX6UL N6310 SoM and boards
ARM: dts: vf610-zii-cfu1: Slow I2C0 down to 100 kHz
ARM: dts: pbab01: correct rtc vendor
ARM: vf610-zii-cfu1: Add node for switch watchdog
ARM: dts: imx6: drop gpmi-nand address and size cells
ARM: dts: imx6: replace simple-bus by simple-mfd for anatop
ARM: dts: imx6qdl-colibri: add phy to fec
ARM: dts: imx7-colibri: add recovery for I2C for iMX7
ARM: dts: imx7-colibri: Add sleep pinctrl to ethernet
ARM: dts: imx7-colibri: prepare module device tree for FlexCAN
ARM: dts: imx7-colibri: disable HS400
ARM: dts: imx7-colibri: make sure module supplies are always on
ARM: dts: imx7d: cl-som-imx7: add compatible for phy
ARM: dts: imx7d: cl-som-imx7: make ethernet work again
ARM: dts: imx6ul: Add csi node
ARM: dts: imx25: mbimxsd25: native-mode is part of display-timings
ARM: dts: apf27dev: native-mode is part of display-timings
ARM: dts: edb7211: native-mode is part of display-timings
ARM: dts: imx27-phytec-phycore-rdk: native-mode is part of display-timings
...
Link: https://lore.kernel.org/r/20190825153237.28829-5-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
dts changes for omap variants for v5.4
Remove regulator-boot-off properties that we never had in the mainline
kernel so they won't do anything. We add stdout-path for gta04, and
make am335x-boneblue use am335x-osd335x-common.dtsi file.
* tag 'omap-for-v5.4/dt-take2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am335x-boneblue: Use of am335x-osd335x-common.dtsi
ARM: dts: gta04: define chosen/stdout-path
ARM: dts: omap3-n950-n9: Remove regulator-boot-off property
ARM: dts: am335x-cm-t335: Remove regulator-boot-off property
Link: https://lore.kernel.org/r/pull-1566599057-142651@atomide.com-2
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Allwinner DT changes for 5.4
Our usual pile of patches for the next release, which include mostly:
- More fixes thanks to the DT validation using the YAML bindings
- IR receiver support on the H6
- SPDIF support on the H6
- I2C Support on the H6
- CSI support on the A20
- RTC support on the H6
- New Boards: Lichee Zero Plus, Tanix TX6, A64-Olinuxino-eMMC
* tag 'sunxi-dt-for-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (40 commits)
arm64: dts: allwinner: orange-pi-3: Enable WiFi
ARM: dts: sunxi: Add missing watchdog clocks
ARM: dts: sunxi: Add missing watchdog interrupts
arm64: dts: allwinner: h6: Add support for RTC and fix the clock tree
ARM: dts: sun7i: Add CSI0 controller
arm64: dts: allwinner: a64: Add A64 OlinuXino board (with eMMC)
dt-bindings: arm: sunxi: Add compatible for A64 OlinuXino with eMMC
ARM: dts: v3s: Change the timers compatible
ARM: dts: h3: Change the timers compatible
ARM: dts: a83t: Change the timers compatible
ARM: dts: a23/a33: Change the timers compatible
ARM: dts: sun6i: Add missing timers interrupts
ARM: dts: sun5i: Add missing timers interrupts
ARM: dts: sun4i: Add missing timers interrupts
dt-bindings: mfd: Convert Allwinner GPADC bindings to a schema
arm64: dts: allwinner: h6: Introduce Tanix TX6 board
dt-bindings: arm: sunxi: Add compatible for Tanix TX6 board
arm64: allwinner: h6: add I2C nodes
dt-bindings: i2c: mv64xxx: Add compatible for the H6 i2c node.
ARM: dts: sunxi: Add mdio bus sub-node to GMAC
...
Link: https://lore.kernel.org/r/d97e6252-9dd7-4cf5-a3cf-56f78b0ca455.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ARM: dts: Amlogic updates for v5.4
Highlights
- odroid-c1: use MAC address from efuse
- add VDD_EE regulator to several boards
* tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM: dts: meson8b: odroidc1: use the MAC address stored in the eFuse
ARM: dts: meson8b: mxq: add the VDDEE regulator
ARM: dts: meson8b: odroidc1: add the VDDEE regulator
ARM: dts: meson8b: ec100: add the VDDEE regulator
ARM: dts: meson8b: add the PWM_D output pin
ARM: dts: meson8b: add ethernet fifo sizes
Link: https://lore.kernel.org/r/7hzhk3bi96.fsf@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A lot more love for Veyron devices with cleanups in the display and wifi
areas and also a 100ms speedup as a delay isn't needed anymore.
New boards are Tiger and Fievel from the Veyron family and the Mecer Xtreme
Mini S6, which I think is the first consumer-grade rk3229-based device in
the kernel.
* tag 'v5.4-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: add device tree for Mecer Xtreme Mini S6
Revert "ARM: dts: rockchip: add startup delay to rk3288-veyron panel-regulators"
ARM: dts: rockchip: Add pin names for rk3288-veyron fievel
ARM: dts: rockchip: A few fixes for veyron-{fievel,tiger}
ARM: dts: rockchip: Cleanup style around assignment operator
ARM: dts: rockchip: add veyron-tiger board
ARM: dts: rockchip: add veyron-fievel board
dt-bindings: ARM: dts: rockchip: Add bindings for rk3288-veyron-{fievel,tiger}
ARM: dts: rockchip: consolidate veyron panel and backlight settings
ARM: dts: rockchip: move rk3288-veryon display settings into a separate file
ARM: dts: rockchip: Limit WiFi TX power on rk3288-veyron-jerry
ARM: dts: rockchip: Specify rk3288-veyron-minnie's display timings
ARM: dts: rockchip: Specify rk3288-veyron-chromebook's display timings
Link: https://lore.kernel.org/r/1611583.rKl1eQBRh8@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Samsung DTS ARM changes for v5.4
1. Add AHCI to Exynos5250,
2. Add camera and GPU power domains to Exynos5422,
3. Minor cleanup.
* tag 'samsung-dt-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Add CAM power domain to Exynos5422/5800
ARM: dts: exynos: Add G3D power domain to Exynos542x
ARM: dts: exynos: Move MSC power domain to the right (sorted) place
ARM: dts: exynos: Add port map to Exynos5250 AHCI node
ARM: dts: exynos: Use space after '=' in exynos4412-itop-scp-core
Link: https://lore.kernel.org/r/20190816163042.6604-2-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
