If the server sends a CB_GETATTR or a CB_RECALL while the filesystem is
being unmounted, then we can Oops when releasing the inode in
nfs4_callback_getattr() and nfs4_callback_recall().
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
On systems with IMA-appraisal enabled with a policy requiring file
signatures, the "good" signature values are stored on the filesystem as
extended attributes (security.ima). Signature verification failure
would normally be limited to just a particular file (eg. executable),
but during boot signature verification failure could result in a system
hang.
Defining and requiring a new public_key_signature field requires all
callers of asymmetric signature verification to be updated to reflect
the change. This patch updates the integrity asymmetric_verify()
caller.
Fixes: 82f94f2447 ("KEYS: Provide software public key query function [ver #2]")
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Cc: David Howells <dhowells@redhat.com>
Acked-by: Denis Kenzior <denkenz@gmail.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Notice that in this particular case, I replaced the code comments with
a proper "fall through" annotation, which is what GCC is expecting
to find.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Notice that in this particular case, I replaced the code comments with
a proper "fall through" annotation, which is what GCC is expecting
to find.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Replace the whole switch statement with a for loop. This makes the
code clearer and easy to read.
This also addresses the following Coverity warnings:
Addresses-Coverity-ID: 115090 ("Missing break in switch")
Addresses-Coverity-ID: 115091 ("Missing break in switch")
Addresses-Coverity-ID: 114700 ("Missing break in switch")
Suggested-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
[daniel.thompson@linaro.org: Tiny grammar change in description]
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
gcc 8.1.0 warns with:
kernel/debug/kdb/kdb_support.c: In function ‘kallsyms_symbol_next’:
kernel/debug/kdb/kdb_support.c:239:4: warning: ‘strncpy’ specified bound depends on the length of the source argument [-Wstringop-overflow=]
strncpy(prefix_name, name, strlen(name)+1);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
kernel/debug/kdb/kdb_support.c:239:31: note: length computed here
Use strscpy() with the destination buffer size, and use ellipses when
displaying truncated symbols.
v2: Use strscpy()
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Jonathan Toppins <jtoppins@redhat.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: kgdb-bugreport@lists.sourceforge.net
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Since commit ad67b74d24 ("printk: hash addresses printed with %p"),
all pointers printed with %p are printed with hashed addresses
instead of real addresses in order to avoid leaking addresses in
dmesg and syslog. But this applies to kdb too, with is unfortunate:
Entering kdb (current=0x(ptrval), pid 329) due to Keyboard Entry
kdb> ps
15 sleeping system daemon (state M) processes suppressed,
use 'ps A' to see all.
Task Addr Pid Parent [*] cpu State Thread Command
0x(ptrval) 329 328 1 0 R 0x(ptrval) *sh
0x(ptrval) 1 0 0 0 S 0x(ptrval) init
0x(ptrval) 3 2 0 0 D 0x(ptrval) rcu_gp
0x(ptrval) 4 2 0 0 D 0x(ptrval) rcu_par_gp
0x(ptrval) 5 2 0 0 D 0x(ptrval) kworker/0:0
0x(ptrval) 6 2 0 0 D 0x(ptrval) kworker/0:0H
0x(ptrval) 7 2 0 0 D 0x(ptrval) kworker/u2:0
0x(ptrval) 8 2 0 0 D 0x(ptrval) mm_percpu_wq
0x(ptrval) 10 2 0 0 D 0x(ptrval) rcu_preempt
The whole purpose of kdb is to debug, and for debugging real addresses
need to be known. In addition, data displayed by kdb doesn't go into
dmesg.
This patch replaces all %p by %px in kdb in order to display real
addresses.
Fixes: ad67b74d24 ("printk: hash addresses printed with %p")
Cc: <stable@vger.kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
On a powerpc 8xx, 'btc' fails as follows:
Entering kdb (current=0x(ptrval), pid 282) due to Keyboard Entry
kdb> btc
btc: cpu status: Currently on cpu 0
Available cpus: 0
kdb_getarea: Bad address 0x0
when booting the kernel with 'debug_boot_weak_hash', it fails as well
Entering kdb (current=0xba99ad80, pid 284) due to Keyboard Entry
kdb> btc
btc: cpu status: Currently on cpu 0
Available cpus: 0
kdb_getarea: Bad address 0xba99ad80
On other platforms, Oopses have been observed too, see
https://github.com/linuxppc/linux/issues/139
This is due to btc calling 'btt' with %p pointer as an argument.
This patch replaces %p by %px to get the real pointer value as
expected by 'btt'
Fixes: ad67b74d24 ("printk: hash addresses printed with %p")
Cc: <stable@vger.kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
selinux_sctp_bind_connect() must verify if the address buffer has
sufficient length before accessing the 'sa_family' field. See
__sctp_connect() for a similar check.
The length of the whole address ('len') is already checked in the
callees.
Reported-by: Qian Cai <cai@gmx.us>
Fixes: d452930fd3 ("selinux: Add SCTP support")
Cc: <stable@vger.kernel.org> # 4.17+
Cc: Richard Haines <richard_c_haines@btinternet.com>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Tested-by: Qian Cai <cai@gmx.us>
Signed-off-by: Paul Moore <paul@paul-moore.com>
VBT appears to have two (or possibly three) ways to indicate the panel
rotation. The first is in the MIPI config block, but that apparenly
usually (maybe always?) indicates 0 degrees despite the actual panel
orientation. The second way to indicate this is in the general features
block, which can just indicate whether 180 degress rotation is used.
The third might be a separate rotation data block, but that is not
at all documented so who knows what it may contain.
Let's try the first two. We first try the DSI specicic VBT
information, and it it doesn't look trustworthy (ie. indicates
0 degrees) we fall back to the 180 degree thing. Just to avoid too
many changes in one go we shall also keep the hardware readout path
for now.
If this works for more than just my VLV FFRD the question becomes
how many of the panel orientation quirks are now redundant?
v2: Move the code into intel_dsi.c (Jani)
Cc: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181022142015.4026-1-ville.syrjala@linux.intel.com
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reduce the clutter in the sprite update functions by writing
both TILEOFF and LINOFF registers unconditionally. We already
did this for primary planes so might as well do it for the
sprites too.
There is no harm in writing both registers. Which one gets
used depends on the tilimg mode selected in the plane control
registers.
It might even make sense to clear the register that won't
get used. That could make register dumps a little easier to
parse. But I'm not sure it's worth the extra hassle.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181108150955.23948-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc
The bug limits the IH ring wptr address to 40bit. When the system memory
is bigger than 1TB, the bus address is more than 40bit, this causes the
interrupt cannot be handled and cleared correctly.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds support for the Primary Plane scaling.
On the Amlogic GX SoCs, the primary plane is used as On-Screen-Display
layer on top of video, and it's needed to keep the OSD layer to a lower
size as the physical display size to :
- lower the memory bandwidth
- lower the OSD rendering
- lower the memory usage
This use-case is used when setting the display mode to 3840x2160 and the
OSD layer is rendered using the GPU. In this case, the GXBB & GXL cannot
work on more than 2000x2000 buffer, thus needing the OSD layer to be kept
at 1920x1080 and upscaled to 3840x2160 in hardware.
The primary plane atomic check still allow 1:1 scaling, allowing native
3840x2160 if needed by user-space applications.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[narmstrong: fixed apply from malformed patch]
Link: https://patchwork.freedesktop.org/patch/msgid/1541497202-20570-4-git-send-email-narmstrong@baylibre.com
The Amlogic Meson GX SoCs support an Overlay plane behind the primary
plane for video rendering.
This Overlay plane support various YUV layouts :
- YUYV
- NV12 / NV21
- YUV444 / 422 / 420 / 411 / 410
The scaler supports a wide range of scaling ratios, but for simplicity,
plane atomic check limits the scaling from x5 to /5 in vertical and
horizontal scaling.
The z-order is fixed and always behind the primary plane and cannot be changed.
The scaling parameter algorithm was taken from the Amlogic vendor kernel
code and rewritten to match the atomic universal plane requirements.
The video rendering using this overlay plane support has been tested using
the new Kodi DRM-KMS Prime rendering path along the in-review V4L2 Mem2Mem
Hardware Video Decoder up to 3840x2160 NV12 frames on various display modes.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Maxime Jourdan <mjourdan@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1541497202-20570-2-git-send-email-narmstrong@baylibre.com
drm-next is forwarded to v4.20-rc1, and we need this to make
a patch series apply.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes:
arch/riscv/kernel/module.c: In function 'apply_r_riscv_32_rela':
./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=]
arch/riscv/kernel/module.c:23:27: note: format string is defined here
arch/riscv/kernel/module.c: In function 'apply_r_riscv_pcrel_hi20_rela':
./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=]
arch/riscv/kernel/module.c:104:23: note: format string is defined here
arch/riscv/kernel/module.c: In function 'apply_r_riscv_hi20_rela':
./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=]
arch/riscv/kernel/module.c:146:23: note: format string is defined here
arch/riscv/kernel/module.c: In function 'apply_r_riscv_got_hi20_rela':
./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=]
arch/riscv/kernel/module.c:190:60: note: format string is defined here
arch/riscv/kernel/module.c: In function 'apply_r_riscv_call_plt_rela':
./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=]
arch/riscv/kernel/module.c:214:24: note: format string is defined here
arch/riscv/kernel/module.c: In function 'apply_r_riscv_call_rela':
./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=]
arch/riscv/kernel/module.c:236:23: note: format string is defined here
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Fixes the following build error from tinyconfig:
riscv64-unknown-linux-gnu-ld: kernel/sched/fair.o: in function `.L8':
fair.c:(.text+0x70): undefined reference to `__lshrti3'
riscv64-unknown-linux-gnu-ld: kernel/time/clocksource.o: in function `.L0 ':
clocksource.c:(.text+0x334): undefined reference to `__lshrti3'
Fixes: 7f47c73b35 ("RISC-V: Build tishift only on 64-bit")
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Building kernel 4.20 for Fedora as RPM fails, because riscv is missing
vdso_install target in arch/riscv/Makefile.
Signed-off-by: David Abdurachmanov <david.abdurachmanov@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The printk timestamps are very useful information to visually see
where kernel is spending time during boot. It also helps us see
the timing of hotplug events at runtime.
This patch enables printk timestamps in RISC-V defconfig so that
we have it enabled by default (similar to other architectures
such as x86_64, arm64, etc).
Signed-off-by: Anup Patel <anup@brainfault.org>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Commit 07d02a67b7 causes a use-after free in the RPCSEC_GSS credential
destroy code, because the call to get_rpccred() in gss_destroying_context()
will now always fail to increment the refcount.
While we could just replace the get_rpccred() with a refcount_set(), that
would have the unfortunate consequence of resurrecting a credential in
the credential cache for which we are in the process of destroying the
RPCSEC_GSS context. Rather than do this, we choose to make a copy that
is never added to the cache and use that to destroy the context.
Fixes: 07d02a67b7 ("SUNRPC: Simplify lookup code")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If we exit the NFSv4 state manager due to a umount, then we can end up
leaving the NFS4CLNT_MANAGER_RUNNING flag set. If another mount causes
the nfs4_client to be rereferenced before it is destroyed, then we end
up never being able to recover state.
Fixes: 47c2199b6e ("NFSv4.1: Ensure state manager thread dies on last ...")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org # v4.15+
This patch refactors smu8_send_msg_to_smc_with_parameter() to include
smu8_send_msg_to_smc_async() so that all the messages sent to SMU can be
profiled and appropriately reported if they fail.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
med_power_with_dipm still causes freezes after updating the firmware to
the latest version (DXT04L5Q).
Set model_rev to NULL and blacklist the device.
Cc: stable@vger.kernel.org
Signed-off-by: Diego Viola <diego.viola@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We need to copy the io priority, too; otherwise the clone will run
with a different priority than the original one.
Fixes: 43b62ce3ff ("block: move bio io prio to a new field")
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixed up subject, and ordered stores.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When copying to the latency type, we should be passing LATENCY_TYPE_LEN,
not DOMAIN_LEN (this isn't a problem in practice because we only pass
"total" or "I/O"). Fix it by changing all of the strlcpy() calls to use
sizeof().
Fixes: 6c3b7af1c9 ("kyber: add tracepoints")
Reported-by: Jordan Glover <Golden_Miller83@protonmail.ch>
Tested-by: Jordan Glover <Golden_Miller83@protonmail.ch>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In my haste to remove irq_port[] I accidentally changed the
way we deal with hpd pins that are shared by multiple encoders
(DP and HDMI for pre-DDI platforms). Previously we would only
handle such pins via ->hpd_pulse(), but now we queue up the
hotplug work for the HDMI encoder directly. Worse yet, we now
count each hpd twice and this increment the hpd storm count
twice as fast. This can lead to spurious storms being detected.
Go back to the old way of doing things, ie. delegate to
->hpd_pulse() for any pin which has an encoder with that hook
implemented. I don't really like the idea of adding irq_port[]
back so let's loop through the encoders first to check if we
have an encoder with ->hpd_pulse() for the pin, and then go
through all the pins and decided on the correct course of action
based on the earlier findings.
I have occasionally toyed with the idea of unifying the pre-DDI
HDMI and DP encoders into a single encoder as well. Besides the
hotplug processing it would have the other benefit of preventing
userspace from trying to enable both encoders at the same time.
That is simply illegal as they share the same clock/data pins.
We have some testcases that will attempt that and thus fail on
many older machines. But for now let's stick to fixing just the
hotplug code.
Cc: stable@vger.kernel.org # 4.19+
Cc: Lyude Paul <lyude@redhat.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Fixes: b6ca3eee18 ("drm/i915: Nuke dev_priv->irq_port[]")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181108200424.28371-1-ville.syrjala@linux.intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
(cherry picked from commit 5a3aeca97a)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
