Michael reported that he could not stat following event:
$ perf stat -e unc_p_freq_ge_1200mhz_cycles -a -- ls
event syntax error: '..e_1200mhz_cycles'
\___ value too big for format, maximum is 255
Run 'perf list' for a list of valid events
The event is unwrapped into:
uncore_pcu/event=0xb,filter_band0=1200/
where filter_band0 format says it's one byte only:
# cat uncore_pcu/format/filter_band0
config1:0-7
while JSON files specifies bigger number:
"Filter": "filter_band0=1200",
all the filter_band* formats show 1 byte width:
# cat uncore_pcu/format/filter_band1
config1:8-15
# cat uncore_pcu/format/filter_band2
config1:16-23
# cat uncore_pcu/format/filter_band3
config1:24-31
The reason of the issue is that filter_band* values are supposed to be
in 100Mhz units.. it's stated in the JSON help for the events, like:
filter_band3=XXX, with XXX in 100Mhz units
This patch divides the filter_band* values by 100, plus there's couple
of changes that actually change the number completely, like:
- "Filter": "edge=1,filter_band2=4000",
+ "Filter": "edge=1,filter_band2=30",
Reported-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20181010080339.GB15790@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo, a man of few words, writes:
"perf fixes:
misc perf tooling fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf record: Use unmapped IP for inline callchain cursors
perf python: Use -Wno-redundant-decls to build with PYTHON=python3
perf report: Don't try to map ip to invalid map
perf script python: Fix export-to-sqlite.py sample columns
perf script python: Fix export-to-postgresql.py occasional failure
When test_flow_dissector.sh runs it complains that it can't find script
with_addr.sh:
./test_flow_dissector.sh: line 81: ./with_addr.sh: No such file or
directory
Rework so that with_addr.sh gets installed, add it to
TEST_PROGS_EXTENDED variable.
Fixes: 50b3ed57de ("selftests/bpf: test bpf flow dissection")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
When test_lwt_seg6local.sh was added commit c99a84eac0
("selftests/bpf: test for seg6local End.BPF action") config fragment
wasn't added, and without CONFIG_LWTUNNEL enabled we see this:
Error: CONFIG_LWTUNNEL is not enabled in this kernel.
selftests: test_lwt_seg6local [FAILED]
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Adding EXTRA_LDFLAGS allowing user to specify extra flags
for LD_FLAGS variable. Also adding LDFLAGS to build command
line.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This is a self-standing test and as such should be itself executable.
Fixes: b5638d46c9 ("selftests: mlxsw: Add a test for UC behavior under MC flood")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Immediately after mlxsw module is probed and lldpad started, added APP
entries are briefly in "unknown" state before becoming "pending". That's
the state that lldpad_app_wait_set() typically sees, and since there are
no pending entries at that time, it bails out. However the entries have
not been pushed to the kernel yet at that point, and thus the test case
fails.
Fix by waiting for both unknown and pending entries to disappear before
proceeding.
Fixes: d159261f36 ("selftests: mlxsw: Add test for trust-DSCP")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use __u32 instead u32 in libbpf.c and also use
uapi perf_event.h instead of tools/perf/perf-sys.h.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This XDP selftest also contain a small TC-bpf component. It provoke
the generic-XDP bug fixed in previous commit.
The selftest itself shows how to do VLAN manipulation from XDP and TC.
The test demonstrate how XDP ingress can remove a VLAN tag, and how TC
egress can add back a VLAN tag.
This use-case originates from a production need by ISP (kviknet.dk),
who gets DSL-lines terminated as VLAN Q-in-Q tagged packets, and want
to avoid having an net_device for every end-customer on the box doing
the L2 to L3 termination.
The test-setup is done via a veth-pair and creating two network
namespaces (ns1 and ns2). The 'ns1' simulate the ISP network that are
loading the BPF-progs stripping and adding VLAN IDs. The 'ns2'
simulate the DSL-customer that are using VLAN tagged packets.
Running the script with --interactive, will simply not call the
cleanup function. This gives the effect of creating a testlab, that
the users can inspect and play with. The --verbose option will simply
request that the shell will print input lines as they are read, this
include comments, which in effect make the comments visible docs.
Reported-by: Yoel Caspersen <yoel@kviknet.dk>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The helper bpf_skb_vlan_push is needed by next patch, and the helper
bpf_skb_vlan_pop is added for completeness, regarding VLAN helpers.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently fixup map are named like fixup_map1, fixup_map2, and so on.
As suggested by Alexei let's change change map names such that we can
identify map type by looking at the name.
This patch is basically a find and replace change:
fixup_map1 -> fixup_map_hash_8b
fixup_map2 -> fixup_map_hash_48b
fixup_map3 -> fixup_map_hash_16b
fixup_map4 -> fixup_map_array_48b
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Since map lookup error can be ENOENT or EOPNOTSUPP, let's print
strerror() as error message in normal and JSON output.
This patch adds helper function print_entry_error() to print
entry from lookup error occurs
Example: Following example dumps a map which does not support lookup.
Output before:
root# bpftool map -jp dump id 40
[
"key": ["0x0a","0x00","0x00","0x00"
],
"value": {
"error": "can\'t lookup element"
},
"key": ["0x0b","0x00","0x00","0x00"
],
"value": {
"error": "can\'t lookup element"
}
]
root# bpftool map dump id 40
can't lookup element with key:
0a 00 00 00
can't lookup element with key:
0b 00 00 00
Found 0 elements
Output after changes:
root# bpftool map dump -jp id 45
[
"key": ["0x0a","0x00","0x00","0x00"
],
"value": {
"error": "Operation not supported"
},
"key": ["0x0b","0x00","0x00","0x00"
],
"value": {
"error": "Operation not supported"
}
]
root# bpftool map dump id 45
key:
0a 00 00 00
value:
Operation not supported
key:
0b 00 00 00
value:
Operation not supported
Found 0 elements
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add sleep between attach and "usbip port" check to make sure status is
updated. Running attach and query back shows incorrect status.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit ac0e2cd555.
Michael reported an issue with oversized terms values assignment
and I noticed there was actually a misunderstanding of the max
value check in the past.
The above commit's changelog says:
If bit 21 is set, there is parsing issues as below.
$ perf stat -a -e uncore_qpi_0/event=0x200002,umask=0x8/
event syntax error: '..pi_0/event=0x200002,umask=0x8/'
\___ value too big for format, maximum is 511
But there's no issue there, because the event value is distributed
along the value defined by the format. Even if the format defines
separated bit, the value is treated as a continual number, which
should follow the format definition.
In above case it's 9-bit value with last bit separated:
$ cat uncore_qpi_0/format/event
config:0-7,21
Hence the value 0x200002 is correctly reported as format violation,
because it exceeds 9 bits. It should have been 0x102 instead, which
sets the 9th bit - the bit 21 of the format.
$ perf stat -vv -a -e uncore_qpi_0/event=0x102,umask=0x8/
Using CPUID GenuineIntel-6-2D
...
------------------------------------------------------------
perf_event_attr:
type 10
size 112
config 0x200802
sample_type IDENTIFIER
...
Reported-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: ac0e2cd555 ("perf tools: Fix PMU term format max value calculation")
Link: http://lkml.kernel.org/r/20181003072046.29276-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
bootgraph & sleepgraph:
- funnel all prints through the pprint function
- remove superfluous print calls, arrange them in single blocks
- flush stdout on every print, enables log capture on hang
sleepgraph:
- in -summary, if all tests have the same host+kernel+mode, add to title
- update verbose device detail print to include machine suspend/resume
- match tKernSus and tKernRes to pm_prepare/restore_console
- fully support multiple suspend/resumes in a single timeline
- enable various disk modes (disk-suspend, disk-test_resume, etc)
- add warnings when -display (xset) fails
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
general:
- add battery charge data before and after test
- remove special s0i3 handling
- remove melding of dmesg & ftrace data in old kernels, use one only
- updates to various kprobes in trace (ksys_sync, etc)
- enable pm_debug_messages during the test
- instrument more subsystems with dev functions (phy0)
error handling:
- return codes for tool show the status of the test run
- 0: success, 1: general error (no timeline), 2: fail (suspend aborted)
- monitor output of /sys/power/state, mark as failure if exception occurs
- add signal handler when using -result to catch tool exceptions
display control
- add -x commands for testing xset with mode settings and status
- allow display setting to on, off, suspend, standby
- add display mode change info to the log, along with a warning on fail
s2idle (freeze)
- remove fixed 10-phase dependency, allow any phase order & any count
- multiple phase occurences show as phase_nameN e.g. suspend_noirq3
- if multiple freezes occur, print multiple time values in header
summary:
- add new columns to summary output: issues, worst suspend/resume devices
- worst device: includes summation of all phases of suspend or resume
- issues: includes WARNING/ERROR/BUG from dmesg log, and other issues
- s2idle: multiple freezes show as FREEZExN in the issues column
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2018-10-08
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) sk_lookup_[tcp|udp] and sk_release helpers from Joe Stringer which allow
BPF programs to perform lookups for sockets in a network namespace. This would
allow programs to determine early on in processing whether the stack is
expecting to receive the packet, and perform some action (eg drop,
forward somewhere) based on this information.
2) per-cpu cgroup local storage from Roman Gushchin.
Per-cpu cgroup local storage is very similar to simple cgroup storage
except all the data is per-cpu. The main goal of per-cpu variant is to
implement super fast counters (e.g. packet counters), which don't require
neither lookups, neither atomic operations in a fast path.
The example of these hybrid counters is in selftests/bpf/netcnt_prog.c
3) allow HW offload of programs with BPF-to-BPF function calls from Quentin Monnet
4) support more than 64-byte key/value in HW offloaded BPF maps from Jakub Kicinski
5) rename of libbpf interfaces from Andrey Ignatov.
libbpf is maturing as a library and should follow good practices in
library design and implementation to play well with other libraries.
This patch set brings consistent naming convention to global symbols.
6) relicense libbpf as LGPL-2.1 OR BSD-2-Clause from Alexei Starovoitov
to let Apache2 projects use libbpf
7) various AF_XDP fixes from Björn and Magnus
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
- Fix building the python bindings with python3, which fixes some
problems with building with clang on Clear Linux (Eduardo Habkost)
- Fix coverity warnings, fixing up some error paths and plugging
some temporary small buffer leaks (Sanskriti Sharma)
- Adopt a wrapper for strerror_r() for the same reasons as recently
for libbpf (Steven Rostedt)
- S390 does not support watchpoints in perf test 22', check if
that test is supported by the arch. (Thomas Richter)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This merges in the "ppc-kvm" topic branch of the powerpc tree to get a
series of commits that touch both general arch/powerpc code and KVM
code. These commits will be merged both via the KVM tree and the
powerpc tree.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Currently we use two bits in the vcpu pending_exceptions bitmap to
indicate that an external interrupt is pending for the guest, one
for "one-shot" interrupts that are cleared when delivered, and one
for interrupts that persist until cleared by an explicit action of
the OS (e.g. an acknowledge to an interrupt controller). The
BOOK3S_IRQPRIO_EXTERNAL bit is used for one-shot interrupt requests
and BOOK3S_IRQPRIO_EXTERNAL_LEVEL is used for persisting interrupts.
In practice BOOK3S_IRQPRIO_EXTERNAL never gets used, because our
Book3S platforms generally, and pseries in particular, expect
external interrupt requests to persist until they are acknowledged
at the interrupt controller. That combined with the confusion
introduced by having two bits for what is essentially the same thing
makes it attractive to simplify things by only using one bit. This
patch does that.
With this patch there is only BOOK3S_IRQPRIO_EXTERNAL, and by default
it has the semantics of a persisting interrupt. In order to avoid
breaking the ABI, we introduce a new "external_oneshot" flag which
preserves the behaviour of the KVM_INTERRUPT ioctl with the
KVM_INTERRUPT_SET argument.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit d1f1b9cbf3 ("selftests: net: Introduce first PMTU test") and
follow-ups introduced some PMTU tests, but they all rely on tunneling,
and, particularly, on VTI.
These new tests use simple routing to exercise the generation and
update of PMTU exceptions in IPv4 and IPv6.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mtu_parse helper introduced in commit f2c929feec ("selftests:
pmtu: Factor out MTU parsing helper") can only handle "mtu 1234", but
not "mtu lock 1234". Extend it, so that we can do IPv4 tests with PMTU
smaller than net.ipv4.route.min_pmtu
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce and use a function that checks PMTU values against
expected values and logs error messages, to remove some clutter.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While working on having PowerTop use libtracevent as a shared object
library, Tzvetomir hit "str_error_r not defined". This was added by commit
c3cec9e68f ("tools lib traceevent: Use str_error_r()") because
strerror_r() has two definitions, where one is GNU specific, and the other
is XSI complient. The strerror_r() is in a wrapper str_error_r() to keep the
code from having to worry about which compiler is being used.
The problem is that str_error_r() is external to libtraceevent, and not part
of the library. If it is used as a shared object then the tools using it
will need to define that function. I do not want that function defined in
libtraceevent itself, as it is out of scope for that library.
As there's only a single instance of this call, and its in the traceevent
library's own tep_strerror() function, we can copy what was done in perf,
and create yet another external file that undefs _GNU_SOURCE to use the more
portable version of the function. We don't need to worry about the errors
that strerror_r() returns. If the buffer isn't big enough, we simply
truncate it.
Reported-by: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: linux trace devel <linux-trace-devel@vger.kernel.org>
Link: http://lkml.kernel.org/r/20181005121816.484e654f@gandalf.local.home
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For each system in a given pevent, read_event_files() reads in a
temporary 'sys' string. Be sure to free this string before moving onto
to the next system and/or leaving read_event_files().
Fixes the following coverity complaints:
Error: RESOURCE_LEAK (CWE-772):
tools/perf/util/trace-event-read.c:343: overwrite_var: Overwriting
"sys" in "sys = read_string()" leaks the storage that "sys" points to.
tools/perf/util/trace-event-read.c:353: leaked_storage: Variable "sys"
going out of scope leaks the storage it points to.
Signed-off-by: Sanskriti Sharma <sansharm@redhat.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Link: http://lkml.kernel.org/r/1538490554-8161-6-git-send-email-sansharm@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The temporary 'buf' buffer allocated in read_event_file() may be freed
twice. Move the free() call to the common function exit point.
Fixes the following coverity complaints:
Error: USE_AFTER_FREE (CWE-825):
tools/perf/util/trace-event-read.c:309: double_free: Calling "free"
frees pointer "buf" which has already been freed.
Signed-off-by: Sanskriti Sharma <sansharm@redhat.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Link: http://lkml.kernel.org/r/1538490554-8161-5-git-send-email-sansharm@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
parse_ftrace_printk() tokenizes and parses a line, calling strdup() each
iteration. Add code to free this temporary format string duplicate.
Fixes the following coverity complaints:
Error: RESOURCE_LEAK (CWE-772):
tools/perf/util/trace-event-parse.c:158: overwrite_var: Overwriting
"printk" in "printk = strdup(fmt + 1)" leaks the storage that "printk"
points to.
tools/perf/util/trace-event-parse.c:162: leaked_storage: Variable
"printk" going out of scope leaks the storage it points to.
Signed-off-by: Sanskriti Sharma <sansharm@redhat.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Link: http://lkml.kernel.org/r/1538490554-8161-4-git-send-email-sansharm@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
S390 does not support the perf_event_open system call for
attribute type PERF_TYPE_BREAKPOINT. This results in test
failure for test 22:
[root@s8360046 perf]# ./perf test 22
22: Watchpoint :
22.1: Read Only Watchpoint : FAILED!
22.2: Write Only Watchpoint : FAILED!
22.3: Read / Write Watchpoint : FAILED!
22.4: Modify Watchpoint : FAILED!
[root@s8360046 perf]#
Add s390 support to avoid these tests being executed on
s390 platform:
[root@s8360046 perf]# ./perf test 22
[root@s8360046 perf]# ./perf test -v 22
22: Watchpoint : Disabled
[root@s8360046 perf]#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180928105335.67179-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we reduce the difference of tools/include/linux/bitops.h to the
original kernel file, include/linux/bitops.h, trying to remove the need
to define BITS_PER_LONG, to avoid clashes with asm/bitsperlong.h.
And the things removed from tools/include/linux/bitops.h are really in
linux/bits.h, so that we can have a copy and then
tools/perf/check_headers.sh will tell us when new stuff gets added to
linux/bits.h so that we can check if it is useful and if any adjustment
needs to be done to the tools/{include,arch}/ copies.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-y1sqyydvfzo0bjjoj4zsl562@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
cpupower crashes on VMWare guests. The guests have the AMD PStateDef MSR
(0xC0010064 + state number) set to zero. As a result fid and did are zero
and the crash occurs because of a divide by zero (cof = fid/did). This
can be prevented by checking the enable bit in the PStateDef MSR before
calculating cof. By doing this the value of pstate[i] remains zero and
the value can be tested before displaying the active Pstates.
Check the enable bit in the PstateDef register for all supported families
and only print out enabled Pstates.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Stafford Horne <shorne@gmail.com>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
To pick up the changes introduced in:
6fbbde9a19 ("KVM: x86: Control guest reads of MSR_PLATFORM_INFO")
That is not yet used in tools such as 'perf trace'.
The type of the change in this file, a simple integer parameter to the
KVM_CHECK_EXTENSION ioctl should be easier to implement tho, adding to
the libbeauty TODO list.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Drew Schmitt <dasch@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-67h1bio5bihi1q6dy7hgwwx8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To get the changes in:
d176620277 ("x86/kvm/lapic: always disable MMIO interface in x2APIC mode")
That at this time will not generate changes in tools such as 'perf trace',
that still needs more work in tools/perf/examples/bpf/augmented_syscalls.c
to need such id -> string tables.
This silences the following perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h'
diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-yadntj2ok6zpzjwi656onuh0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
libbpf is maturing as a library and gaining features that no other bpf libraries support
(BPF Type Format, bpf to bpf calls, etc)
Many Apache2 licensed projects (like bcc, bpftrace, gobpf, cilium, etc)
would like to use libbpf, but cannot do this yet, since Apache Foundation explicitly
states that LGPL is incompatible with Apache2.
Hence let's relicense libbpf as dual license LGPL-2.1 or BSD-2-Clause,
since BSD-2 is compatible with Apache2.
Dual LGPL or Apache2 is invalid combination.
Fix license mistake in Makefile as well.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: David Beckett <david.beckett@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Joe Stringer <joe@ovn.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
I wrote:
"Char/Misc fixes for 4.19-rc7
Here are 8 small fixes for some char/misc driver issues
Included here are:
- fpga driver fixes
- thunderbolt bugfixes
- firmware core revert/fix
- hv core fix
- hv tool fix
All of these have been in linux-next with no reported issues."
* tag 'char-misc-4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
thunderbolt: Initialize after IOMMUs
thunderbolt: Do not handle ICM events after domain is stopped
firmware: Always initialize the fw_priv list object
docs: fpga: document fpga manager flags
fpga: bridge: fix obvious function documentation error
tools: hv: fcopy: set 'error' in case an unknown operation was requested
fpga: do not access region struct after fpga_region_unregister
Drivers: hv: vmbus: Use get/put_cpu() in vmbus_connect()
