Added a subtest in test_progs. The tracepoint is
sched/sched_switch. Multiple bpf programs are attached to
this tracepoint and the query interface is exercised.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Felipe writes:
usb: fixes for v4.15-rc4
We have a few fixes on dwc3:
- one fix which only happens with some implementations where we need to
wait longer for some commands to finish.
- Another fix for high-bandwidth isochronous endpoint programming making
sure that we send the correct DATA tokens in the correct sequence
- A couple PM fixes on dwc3-of-simple
The other synopsys controller driver (dwc2) got a fix for FIFO size
programming.
Other than these, we have a couple Kconfig fixes making sure that
dependencies are properly setup.
The purpose of torture_runnable is to allow rcutorture and locktorture
to be started and stopped via sysfs when they are built into the kernel
(as in not compiled as loadable modules). However, the 0444 permissions
for both instances of torture_runnable prevent this use case from ever
being put into practice. Given that there have been no complaints
about this deficiency, it is reasonable to conclude that no one actually
makes use of this sysfs capability. The perf_runnable module parameter
for rcuperf is in the same situation.
This commit therefore removes both torture_runnable instances as well
as perf_runnable.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Check for build-directory existence and write permissions are provided in
both 'kvm-test-1-run.sh' an 'kvm-build.sh'. Because the 'kvm-build.sh'
is dependent on 'kvm-test-1-run.sh' ('kvm-build.sh' uses variables that
defined from its caller.), these checks are unnecessarily duplicated.
This commit therefore removes the check in from the 'kvm-build.sh' script.
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Inclusions of 'functions.sh' from 'kvm-test-1-run.sh' and
'kvm-recheck*.sh' use its absolute path. Because the directory containing
'functions.sh' is already in PATH, the full path is unnecessary. This
commit therefore simplifies the inclusions to use the short relative path.
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Both the 'kvm.sh' and 'kvm-test-1-run.sh' scripts log messages by printing
the message to 'stdout' and then also printing it into the log file.
Generation of the message thus occurs twice, once for 'stdout' and once
for the log file. Moreover, many of the messages contain 'date' output,
which results in date being invoked twice (once for stdout print, once
for log file write). As a result, the date information in stdout and
log file can differ, which could cause confusion.
This commit therefore simplifies the logging procedure by using 'tee'.
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The kvm-recheck-(lock|rcu|rcuperf).sh scripts check whether the
user-specified results directory exists. If not, it prints out error
message that says the specified directory is unreadable. To make the
message more precise, this commit adds a readability check.
Fixes: 2193e1604e ("rcutorture: Abstract kvm-recheck.sh")
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The 'kvm.sh' rcutorture script requires that it be invoked from the top
of Linux-kernel source tree. It is just a subtle restriction, but users
using it for the first time could forget the restriction and be confused.
Moreover, it makes commands a little longer, which can be frustrating.
This commit therefore lets users invoke the script from any location.
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The '--qemu-args' option's help text is wrongly copied from '--qemu-cmd'
option and its argument type description message format is inconsistent
with other arguments. This commit fixes the usage and type messages to
be consistent with others.
Fixes: e9ce640001 ("rcutorture: Add --qemu-args argument to kvm.sh")
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The variable `alldone` is defined but not used within an awk script.
This commit therefore removes it.
Fixes:53954671033d ("rcutorture: Do better bin packing")
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The 'config2frag.sh' script is not used, so this commit removes it.
Fixes: c87b9c601a ("rcutorture: Add KVM-based test framework")
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The 'configinit.sh' script checks the format of optional argument for the
build directory, printing an error message if the format is not valid.
However, the error message uses the wrong variable, indicating an empty
string even though the user entered a non-empty (but erroneous) string.
This commit fixes the script to use the correct variable.
Fixes: c87b9c601a ("rcutorture: Add KVM-based test framework")
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
GCC 7 will take "r2" in clobber list as an error and it will get
following build errors for powerpc ptrace selftests even with -fno-pic
option:
ptrace-tm-vsx.c: In function ‘tm_vsx’:
ptrace-tm-vsx.c:42:2: error: PIC register clobbered by ‘r2’ in ‘asm’
asm __volatile__(
^~~
make[1]: *** [ptrace-tm-vsx] Error 1
ptrace-tm-spd-vsx.c: In function ‘tm_spd_vsx’:
ptrace-tm-spd-vsx.c:55:2: error: PIC register clobbered by ‘r2’ in ‘asm’
asm __volatile__(
^~~
make[1]: *** [ptrace-tm-spd-vsx] Error 1
ptrace-tm-spr.c: In function ‘tm_spr’:
ptrace-tm-spr.c:46:2: error: PIC register clobbered by ‘r2’ in ‘asm’
asm __volatile__(
^~~
Fix the build error by removing "r2" from the clobber list. None of
these asm blocks actually clobber r2.
Reported-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Tested-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 4675ff05de ("kmemcheck: rip it out") has removed the code but
for some reason SPDX header stayed in place. This looks like a rebase
mistake in the mmotm tree or the merge mistake. Let's drop those
leftovers as well.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull networking fixes from David Miller:
1) CAN fixes from Martin Kelly (cancel URBs properly in all the CAN usb
drivers).
2) Revert returning -EEXIST from __dev_alloc_name() as this propagates
to userspace and broke some apps. From Johannes Berg.
3) Fix conn memory leaks and crashes in TIPC, from Jon Malloc and Cong
Wang.
4) Gianfar MAC can't do EEE so don't advertise it by default, from
Claudiu Manoil.
5) Relax strict netlink attribute validation, but emit a warning. From
David Ahern.
6) Fix regression in checksum offload of thunderx driver, from Florian
Westphal.
7) Fix UAPI bpf issues on s390, from Hendrik Brueckner.
8) New card support in iwlwifi, from Ihab Zhaika.
9) BBR congestion control bug fixes from Neal Cardwell.
10) Fix port stats in nfp driver, from Pieter Jansen van Vuuren.
11) Fix leaks in qualcomm rmnet, from Subash Abhinov Kasiviswanathan.
12) Fix DMA API handling in sh_eth driver, from Thomas Petazzoni.
13) Fix spurious netpoll warnings in bnxt_en, from Calvin Owens.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (67 commits)
net: mvpp2: fix the RSS table entry offset
tcp: evaluate packet losses upon RTT change
tcp: fix off-by-one bug in RACK
tcp: always evaluate losses in RACK upon undo
tcp: correctly test congestion state in RACK
bnxt_en: Fix sources of spurious netpoll warnings
tcp_bbr: reset long-term bandwidth sampling on loss recovery undo
tcp_bbr: reset full pipe detection on loss recovery undo
tcp_bbr: record "full bw reached" decision in new full_bw_reached bit
sfc: pass valid pointers from efx_enqueue_unwind
gianfar: Disable EEE autoneg by default
tcp: invalidate rate samples during SACK reneging
can: peak/pcie_fd: fix potential bug in restarting tx queue
can: usb_8dev: cancel urb on -EPIPE and -EPROTO
can: kvaser_usb: cancel urb on -EPIPE and -EPROTO
can: esd_usb2: cancel urb on -EPIPE and -EPROTO
can: ems_usb: cancel urb on -EPIPE and -EPROTO
can: mcba_usb: cancel urb on -EPROTO
usbnet: fix alignment for frames with no ethernet header
tcp: use current time in tcp_rcv_space_adjust()
...
Create two targets to remove executable and documentation that would
have been previously installed with `make install` and `make
doc-install`.
Also create a "QUIET_UNINST" helper in tools/scripts/Makefile.include.
Do not attempt to remove directories /usr/local/sbin and
/usr/share/bash-completions/completions, even if they are empty, as
those specific directories probably already existed on the system before
we installed the program, and we do not wish to break other makefiles
that might assume their existence. Do remvoe /usr/local/share/man/man8
if empty however, as this directory does not seem to exist by default.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Several minor fixes and harmonisation items for Makefiles:
* Use the same mechanism for verbose/non-verbose output in two files
("$(Q)"), for all commands.
* Use calls to "QUIET_INSTALL" and equivalent in Makefile. In
particular, use "call(descend, ...)" instead of "make -C" to run
documentation targets.
* Add a "doc-clean" target, aligned on "doc" and "doc-install".
* Make "install" target in Makefile depend on "bpftool".
* Remove condition on DESTDIR to initialise prefix in doc Makefile.
* Remove modification of VPATH based on OUTPUT, it is unused.
* Formatting: harmonise spaces around equal signs.
* Make install path for man pages /usr/local/man instead of
/usr/local/share/man (respects the Makefile conventions, and the
latter is usually a symbolic link to the former anyway).
* Do not erase prefix if set by user in bpftool Makefile.
* Fix install target for bpftool: append DESTDIR to install path.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
When a client has a USB device attached over IP, the vhci_hcd driver is
locally leaking a socket pointer address via the
/sys/devices/platform/vhci_hcd/status file (world-readable) and in debug
output when "usbip --debug port" is run.
Fix it to not leak. The socket pointer address is not used at the moment
and it was made visible as a convenient way to find IP address from socket
pointer address by looking up /proc/net/{tcp,tcp6}.
As this opens a security hole, the fix replaces socket pointer address with
sockfd.
Reported-by: Secunia Research <vuln@secunia.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes following build error:
vhci_driver.c: In function 'refresh_imported_device_list':
vhci_driver.c:118:37: error: 'snprintf' output may be truncated before
the last format character [-Werror=format-truncation=]
snprintf(status, sizeof(status), "status.%d", i);
^~~~~~~~~~~
vhci_driver.c:118:4: note: 'snprintf' output between 9 and 18 bytes into
a destination of size 17
snprintf(status, sizeof(status), "status.%d", i);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Indeed musl doesn't define old SIGCLD signal name but only new one SIGCHLD.
SIGCHLD is the new POSIX name for that signal so it doesn't change
anything on other libcs.
This fixes this kind of build error:
usbipd.c: In function ‘set_signal’:
usbipd.c:459:12: error: 'SIGCLD' undeclared (first use in this function)
sigaction(SIGCLD, &act, NULL);
^~~~~~
usbipd.c:459:12: note: each undeclared identifier is reported only once
for each function it appears in
Makefile:407: recipe for target 'usbipd.o' failed
make[3]: *** [usbipd.o] Error 1
Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull perf fixes from Ingo Molnar:
"This includes perf namespace support kernel side fixes, plus an
accumulated set of perf tooling fixes - including UAPI header
synchronization that should make the perf build less noisy"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits)
tooling/headers: Synchronize updated s390 and x86 UAPI headers
tools headers: Syncronize mman.h ABI header
tools headers: Synchronize prctl.h ABI header
tools headers: Synchronize KVM arch ABI headers
tools headers: Synchronize drm/i915_drm.h
tools headers uapi: Synchronize drm/drm.h
tools headers: Synchronize perf_event.h header
tools headers: Synchronize kernel ABI headers wrt SPDX tags
tools/headers: Synchronize kernel x86 UAPI headers
perf intel-pt: Bring instruction decoder files into line with the kernel
perf test: Fix test 21 for s390x
perf bench numa: Fixup discontiguous/sparse numa nodes
perf top: Use signal interface for SIGWINCH handler
perf top: Fix window dimensions change handling
perf: Fix header.size for namespace events
perf top: Ignore kptr_restrict when not sampling the kernel
perf record: Ignore kptr_restrict when not sampling the kernel
perf report: Ignore kptr_restrict when not sampling the kernel
perf evlist: Add helper to check if attr.exclude_kernel is set in all evsels
perf test shell: Fix test case probe libc's inet_pton on s390x
...
The new ORC unwinder breaks the build of a 64-bit kernel on a 32-bit
host. Building the kernel on a i386 or x32 host fails with:
orc_dump.c: In function 'orc_dump':
orc_dump.c:105:26: error: passing argument 2 of 'elf_getshdrnum' from incompatible pointer type [-Werror=incompatible-pointer-types]
if (elf_getshdrnum(elf, &nr_sections)) {
^
In file included from /usr/local/include/gelf.h:32:0,
from elf.h:22,
from warn.h:26,
from orc_dump.c:20:
/usr/local/include/libelf.h:304:12: note: expected 'size_t * {aka unsigned int *}' but argument is of type 'long unsigned int *'
extern int elf_getshdrnum (Elf *__elf, size_t *__dst);
^~~~~~~~~~~~~~
orc_dump.c:190:17: error: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'Elf64_Sxword {aka long long int}' [-Werror=format=]
printf("%s+%lx:", name, rela.r_addend);
~~^ ~~~~~~~~~~~~~
%llx
Fix the build failure.
Another problem is that if the user specifies HOSTCC or HOSTLD
variables, they are ignored in the objtool makefile. Change the
Makefile to respect these variables.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sven Joachim <svenjoac@gmx.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 627fce1480 ("objtool: Add ORC unwind table generation")
Link: http://lkml.kernel.org/r/19f0e64d8e07e30a7b307cd010eb780c404fe08d.1512252895.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
'perf record' can switch its output data file. The new output should
only store the data after switching. However, in overwrite backward
mode, the new output still can have data from before switching. That
also brings extra overhead.
At the end of mmap_read(), the position of the processed ring buffer is
saved in md->prev. Next mmap_read should be end in md->prev if it is not
overwriten. That avoids processing duplicate data. However, md->prev is
discarded. So next the mmap_read() has to process whole valid ring
buffer, which probably includes old processed data.
Avoid calling backward_rb_find_range() when md->prev is still
available.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Kan Liang <kan.liang@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mengting Zhang <zhangmengting@huawei.com>
Link: http://lkml.kernel.org/r/20171204165107.95327-3-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are codes that print messages to the screen between assignment of
the use_browser variable and setup_browser().
But since the GUI browser is not initialized during that period, all
messages fail to show if the user passed the --gtk option to perf as GTK
is not initialized yet.
Reorder the code to assign use_browser variable right before
setup_browser() is called.
Signed-off-by: Seokho Song <0xdevssh@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20171204160244.6332-1-0xdevssh@gmail.com
Signed-off-by: Park Ju Hyung <qkrwngud825@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The powerpc cpuid information includes chip revision information.
Changes between chip revisions are usually minor bug fixes and usually
do not affect the operation of the performance monitoring hardware.
The original mapfile.csv matching requires enumerating every possible
cpuid string. When a new minor chip revision is produced a new entry
has to be added to the mapfile.csv and the code recompiled to allow perf
to have the implementation specific perf events for this new minor
revision. For users of various distibutions of Linux having to wait for
a new release of the kernel's perf tool to be built with these trivial
patches is inconvenient.
Using regular expressions rather than exactly string matching of the
entire cpuid string allows developers to write mapfile.csv files that do
not require patches and recompiles for each of these minor version
changes. If special cases need to be made for some particular versions,
they can be placed earlier in the mapfile.csv file before the more
general matches.
Signed-off-by: William Cohen <wcohen@redhat.com>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shriya <shriyak@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20171204145728.16792-1-wcohen@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On Fedora systems the perl and python CFLAGS/LDFLAGS include the
hardened specs from redhat-rpm-config package. We apply them only for
perl/python objects, which makes them not compatible with the rest of
the objects and the build fails with:
/usr/bin/ld: perf-in.o: relocation R_X86_64_32 against `.rodata.str1.1' can not be used when making a shared object; recompile with -f
+PIC
/usr/bin/ld: libperf.a(libperf-in.o): relocation R_X86_64_32S against `.text' can not be used when making a shared object; recompile w
+ith -fPIC
/usr/bin/ld: final link failed: Nonrepresentable section on output
collect2: error: ld returned 1 exit status
make[2]: *** [Makefile.perf:507: perf] Error 1
make[1]: *** [Makefile.perf:210: sub-make] Error 2
make: *** [Makefile:69: all] Error 2
Mainly it's caused by perl/python objects being compiled with:
-specs=/usr/lib/rpm/redhat/redhat-hardened-cc1
which prevent the final link impossible, because it will check
for 'proper' objects with following option:
-specs=/usr/lib/rpm/redhat/redhat-hardened-ld
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20171204082437.GC30564@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull char/misc fixes from Greg KH:
"Here are some small misc driver fixes for 4.15-rc3 to resolve reported
issues. Specifically these are:
- binder fix for a memory leak
- vpd driver fixes for a number of reported problems
- hyperv driver fix for memory accesses where it shouldn't be.
All of these have been in linux-next for a while. There's also one
more MAINTAINERS file update that came in today to get the Android
developer's emails correct, which is also in this pull request, that
was not in linux-next, but should not be an issue"
* tag 'char-misc-4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
MAINTAINERS: update Android driver maintainers.
firmware: vpd: Fix platform driver and device registration/unregistration
firmware: vpd: Tie firmware kobject to device lifetime
firmware: vpd: Destroy vpd sections in remove function
hv: kvp: Avoid reading past allocated blocks from KVP file
Drivers: hv: vmbus: Fix a rescind issue
ANDROID: binder: fix transaction leak.
Pull USB fixes from Greg KH:
"Here are a few minor USB fixes for 4.15-rc3.
The largest here is the Kconfig text and configuration changes for the
USB TypeC build options that you reported during the -rc1 merge
window. The others are all just small fixes for reported issues, as
well as some new device ids.
The most "interesting" of anything here is the usbip fixes as it seems
lots of people are starting to pay attention to that driver at the
moment. These fixes should resolve all of the reported problems as of
now.
Of course there are the usual xhci and gadget fixes as well, can't go
a pull request without those...
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits)
usb: xhci: fix panic in xhci_free_virt_devices_depth_first
xhci: Don't show incorrect WARN message about events for empty rings
usbip: fix usbip attach to find a port that matches the requested speed
usbip: Fix USB device hang due to wrong enabling of scatter-gather
uas: Always apply US_FL_NO_ATA_1X quirk to Seagate devices
usb: quirks: Add no-lpm quirk for KY-688 USB 3.1 Type-C Hub
usb: build drivers/usb/common/ when USB_SUPPORT is set
usb: hub: Cycle HUB power when initialization fails
USB: core: Add type-specific length check of BOS descriptors
usb: host: fix incorrect updating of offset
USB: ulpi: fix bus-node lookup
USB: usbfs: Filter flags passed in from user space
usb: add user selectable option for the whole USB Type-C Support
usb: f_fs: Force Reserved1=1 in OS_DESC_EXT_COMPAT
usb: gadget: core: Fix ->udc_set_speed() speed handling
usb: gadget: allow to enable legacy drivers without USB_ETH
usb: gadget: udc: renesas_usb3: fix number of the pipes
usb: gadget: don't dereference g until after it has been null checked
USB: serial: usb_debug: add new USB device id
usb: bdc: fix platform_no_drv_owner.cocci warnings
...
