kfree has taken the null pointer into account. hence it is safe
to remove the redundant null pointer check before kfree.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Print the enabled smc feature mask in amdgpu_pm_info for debugging.
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The DISPCLK value was previously requested to be 15% higher for all
ASICs that went through the dce110 bandwidth code path. As part of a
refactoring of dce_clocks and the dce110 set bandwidth codepath this
was removed for power saving considerations.
That change caused display corruption under certain hardware
configurations with Vega10.
[How]
The 15% DISPCLK increase is brought back but only on dce110 for now.
This is should be a temporary workaround until the root cause is sorted
out for why this occurs on Vega (or other ASICs, if reported).
Tested-by: Nick Sarnie <sarnex@gentoo.org>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Previously night light forced a full update by
applying a transfer function update regardless of if it was changed.
This logic was removed,
Now gamma surface updates are only applied when there is also a plane
info update, this does not work in cases such as using the night light
slider.
[HOW]
When moving the night light slider we will perform a full update if
the gamma has changed and there is a surface, even when the surface
has not changed. Also get stream updates in setgamma prior to
update planes and stream.
Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
During suspend under some hardware configurations can result in a
series of atomic commits with a NULL stream status - which
causes a NULL pointer dereference. This should be guarded.
[How]
Exit early from the function - if we can't access the stream then
there isn't anything that can be done here.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
There are two different variables used to calculate v_update and v_ready,
one for validation and the other for performance parameter calculation.
Before the variable for validation was used which caused underflow on
1080edp with vsr enabled
[HOW]
program v_update and v_ready with the variables for performance parameter
calculation
Signed-off-by: Su Sung Chung <su.chung@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Revert "drm/amd/display: Remove call to amdgpu_pm_compute_clocks"
This reverts commit dcd473770e86517543691bdb227103d6c781cd0a.
when display configuration changes, dc need to update the changes
to powerplay, also need to trigger a power state task.
amdgpu_pm_compute_clocks is the interface to set power state task
either dpm enabled or powerplay enabled
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Right now RESET_PCH_HANDSHAKE_ENABLE is enabled all the times inside
of intel_power_domains_init_hw() and if PCH is NOP it is unsed in
i915_gem_init_hw().
So making skl_pch_reset_handshake() handle both cases and calling
it for the missing gens in intel_power_domains_init_hw().
Ivybridge have a different register and bits but with the same
objective so moving it too.
v2(Rodrigo):
- handling IVYBRIDGE case inside intel_pch_reset_handshake()
v4(Rodrigo and Ville):
- moving the enable/disable decision to callers
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180918204714.27306-2-jose.souza@intel.com
The lcdif block is only powered on when display is active so plane
updates when not enabled are not valid. Writing to an unpowered IP block
is mostly ignored but can trigger bus errors on some chips.
Prevent this situation by switching to drm_atomic_helper_commit_tail_rpm
and having the drm core ensure atomic_plane_update is only called while
the crtc is active. This avoids having to keep track of "enabled" bits
inside the mxsfb driver.
This also requires handling the vblank event for disable from
mxsfb_pipe_disable.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Suggested-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/c19c0c00ed42e8e8f7965aa4821ac295abc5cd05.1537191359.git.leonard.crestez@nxp.com
All Tegra DRM devices are getting attached to an implicit IOMMU DMA
domain if CONFIG_ARM_DMA_USE_IOMMU=y. Since Tegra DRM driver manages IOMMU
by itself, the devices must be detached from the implicit domain using
arch-specific IOMMU-API. Note that this works only for arm32 and not for
arm64, which will remain broken if CONFIG_IOMMU_DMA is enabled.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Host1x is getting attached to an implicit IOMMU DMA domain if
CONFIG_ARM_DMA_USE_IOMMU=y. Since Host1x driver manages IOMMU by
itself, Host1x device must be detached from the implicit domain using
arch-specific IOMMU-API.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
All other assignments have a single space around the = sign, so remove
the spurious tab for consistency.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The SOR implemented in Tegra194 is subtly different from its predecessor
found in Tegra186. Most notably some registers have been moved around so
it is no longer compatible.
Signed-off-by: Thierry Reding <treding@nvidia.com>
