The etnaviv device is a virtual device backing the DRM device, which may
drive multiple hardware GPU core devices. As most of the dma-mapping handling
is done through the virtual device, we need to make sure that a proper DMA
setup is in place. The easiest way to get a reasonable configuration is
to let the virtual device share the DMA configuration with one of the GPU
devices, so call of_dma_configure() with the right parameters manually.
This assumes that all etnaviv driven GPU devices in the system share the
same DMA configuration. If we ever encounter a SoC where the GPUs are on
busses with different offsets or behind different IOMMUs that will require
much deeper changes to the driver, as we would need to implement etnaviv
specific versions of most of the DRM helper functions.
For now we should be fine with this solution.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Guido Günther <agx@sigxcpu.org>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
If the ioctl is not supported on a particular piece of HW/driver
combination, report ENOTSUP (aka EOPNOTSUPP) so that it can be easily
distinguished from both the lack of the ioctl and from a regular invalid
parameter.
v2: Across all the kms ioctls we had a mixture of reporting EINVAL,
ENODEV and a few ENOTSUPP (most where EINVAL) for a failed
drm_core_check_feature(). Update everybody to report ENOTSUPP.
v3: ENOTSUPP is an internal errno! It's value (524) does not correspond
to a POSIX errno, the one we want is ENOTSUP. However,
uapi/asm-generic/errno.h doesn't include ENOTSUP but man errno says
"ENOTSUP and EOPNOTSUPP have the same value on Linux,
but according to POSIX.1 these error values should be
distinct."
so use EOPNOTSUPP as its equivalent.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> #v2
Link: https://patchwork.freedesktop.org/patch/msgid/20180913192050.24812-1-chris@chris-wilson.co.uk
Treat them all as Raven rather than adding a new picasso
asic type. This simplifies a lot of code and also handles the
case of rv2 chips with the 0x15d8 pci id. It also fixes dmcu
fw handling for picasso.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DMCU firmware version can be read using the AMDGPU_INFO ioctl
or the amdgpu_firmware_info debugfs entry
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* Use consistent capitalization in the description of function arguments
* Define and consistently use the BO acronym for buffer objects
* Some minor wording improvements
Signed-off-by: Vijetha Malkai <vijetha.malkai@amd.com>
[ Michel Dänzer: Made commit log more specific ]
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The entries were only initialized once in amdgpu_sa_bo_new. If a fence
wasn't signalled yet in the first amdgpu_sa_bo_next_hole call, but then
got signalled before a later amdgpu_sa_bo_next_hole call, it could
destroy the fence but leave its pointer in the array, resulting in
use-after-free in amdgpu_sa_bo_new.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Raven2 has a HW issue that it is unable to use the vram which is out of
MC_VM_SYSTEM_APERTURE_HIGH_ADDR. So here is the workaround that increase system
aperture high address to get rid of the VM fault and hardware hang.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than checking the asic type, check whether the UVD
or VCE IP blocks exist. This way we don't have to update
the check with new asics that use VCN.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove some functions due to the design change.
All the mmhub power gating sequence is moved to
smu fw.Driver sends the message to enable mmhub
powergating.We can also skip the fw version check
since the old fw version is in a very early stage
and we don't use that fw for release.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The prior assumption was that we did not need to reset the CSB on
wedging when cancelling the outstanding requests as it would be cleaned
up in the subsequent reset prior to restarting the GPU. However, what
was not accounted for was that in preparing for the reset, we would try
to process the outstanding CSB entries. If the GPU happened to complete
a CS event just as we were performing the cancellation of requests, that
event would be kept in the CSB until the reset -- but our bookkeeping
was cleared, causing confusion when trying to complete the CS event.
v2: Use a sanitize on unwedge to avoid interfering with eio suspend
(where we intentionally disable GPU reset).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107925
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180914080017.30308-3-chris@chris-wilson.co.uk
If an asynchronous wait on a foriegn fence, we print a warning
indicating which fence was not signaled. As i915_sw_fences become more
common, include the debug hint (the symbol-name of the target) to help
identify the waiter. E.g.
[ 31.968144] Asynchronous wait on fence sw_sync:gem_eio:1 timed out (hint:submit_notify [i915])
We also want to downgrade from a warning to a notice (normal but
significant condition) as the timeout is imposed and controlled by the
caller (i.e. it is deliberate) and can be provoked by userspace.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180914124007.18790-1-chris@chris-wilson.co.uk
