Identically to how we look up ttm base objects witout reference, provide
the same functionality to vmw user buffer objects which derive from them.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Adapt the validation code so that vmw_validation_add[res|bo] can be called
under an rcu read lock (non-sleeping) and with rcu-only protected resource-
or buffer object pointers.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Export ttm_bo_get_unless_zero() to be used when looking up buffer
objects that are removed from the lookup structure in the destructor.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
We've opted to use the maximum link rate and lane count for eDP panels,
because typically the maximum supported configuration reported by the
panel has matched the native resolution requirements of the panel, and
optimizing the link has lead to problems.
With eDP 1.4 rate select method and DSC features, this is decreasingly
the case. There's a need to optimize the link parameters. Moreover,
already eDP 1.3 states fast link with fewer lanes is preferred over the
wide and slow. (Wide and slow should still be more reliable for longer
cable lengths.)
Additionally, there have been reports of panels failing on arbitrary
link configurations, although arguably all configurations they claim to
support should work.
Optimize eDP 1.4+ link config fast and narrow.
Side note: The implementation has a near duplicate of the link config
function, with just the two inner for loops turned inside out. Perhaps
there'd be a way to make this, say, more table driven to reduce the
duplication, but seems like that would lead to duplication in the table
generation. We'll also have to see how the link config optimization for
DSC turns out.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: "Lee, Shawn C" <shawn.c.lee@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105267
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180905095321.13843-1-jani.nikula@intel.com
Comment claims link needs to be retrained because the connected sink raised
a long pulse to indicate link loss. If the sink did so,
intel_dp_hotplug() would have handled link retraining. Looking at the
logs in Bugzilla referenced in commit '3cf71bc9904d ("drm/i915: Re-apply
Perform link quality check, unconditionally during long pulse"")', the
issue is that the sink does not trigger an interrupt. What we want is
->detect() from user space to check link status and retrain. Ville's
review for the original patch also indicates the same root cause. So,
rewrite the comment.
v2: Patch split and rewrote comment.
Cc: Lyude Paul <lyude@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jan-Marek Glogowski <glogow@fbihome.de>
References: 3cf71bc990 ("drm/i915: Re-apply "Perform link quality check, unconditionally during long pulse"")
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180927205735.16651-1-dhinakaran.pandiyan@intel.com
Driver Changes:
- Bugzilla 107600: Fix stuttering video playback on MythTV on old hardware (Chris)
- Avoid black screen when using CSC coefficient matrix (Raviraj)
- Hammer PDs on Baytrail to make sure they reload (Chris)
- Capture some objects if unable to capture all, on error (Chris)
- Add W/A for 16 GB DIMMs on SKL+ (Mahesh)
- Only enable IPC for symmetric memory configurations on KBL+ (Mahesh)
- Assume pipe A to have maximum stride limits (Ville)
- Always update update OA contexts via context image (Tvrtko)
- Icelake enabling patches (Madhav, Dhinakaran)
- Add Icelake DMC firmware (Anusha)
- Fixes for CI found corner cases (Chris)
- Limit the backpressure for request allocation (Chris)
- Park GPU on module load so usage starts from known state (Chris)
- Flush tasklet when checking for idle (Chris)
- Use coherent write into the context image on BSW+ (Chris)
- Fix possible integer overflow for framebuffers that get aligned past 4GiB (Ville)
- Downgrade fence timeout from warn to notice and add debug hint (Chris)
- Fixes to multi function encoder code (Ville)
- Fix sprite plane check logic (Dan, Ville)
- PAGE_SIZE vs. I915_GTT_PAGE_SIZE fixes (Ville)
- Decode memory bandwidth and parameters for BXT and SKL+ (Mahesh)
- Overwrite BIOS set IPC value from KMS (Mahesh)
- Multiple pipe handling code cleanups/restructurings/optimizations (Ville)
- Spare low 4G address for non-48bit objects (Chris)
- Free context_setparam of struct_mutex (Chris)
- Delay updating ring register state on resume (Chris)
- Avoid unnecessarily copying overlay IOCTL parameters (Chris)
- Update GuC power domain states even without submission (Michal)
- Restore GuC preempt-context across S3/S4 (Chris)
- Add kernel selftest for rapid context switching (Chris)
- Keep runtime power management ref for live selftests (Chris)
- GEM code cleanups (Matt)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180927095933.GA11458@jlahtine-desk.ger.corp.intel.com
[Why]
EDID emulation didn't work properly for linux, as we stop programming
if nothing is connected physically.
[How]
We get a flag from DRM when we want to do edid emulation. We check if
this flag is true and nothing is connected physically, if so we only
program the front end using VIRTUAL_SIGNAL.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There have been a few reports of Vega10 display remaining blank
after S3 resume. The regression is caused by workaround for mode
change on Vega10 - skip set_bandwidth if stream count is 0.
As a result we skipped dispclk reset on suspend, thus on resume
we may skip the clock update assuming it hasn't been changed.
On some systems it causes display blank or 'out of range'.
[How]
Revert "drm/amd/display: Fix Vega10 black screen after mode change"
Verified that it hadn't cause mode change regression.
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The vce cancel_delayed_work_sync never be called.
driver call the function in error path.
This caused the A+A suspend hang when runtime pm enebled.
As we will visit the smu in the idle queue. this will cause
smu hang because the dgpu has been suspend, and the dgpu also
will be waked up. As the smu has been hang, so the dgpu resume
will failed.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This reverts commit 0c08754b59.
commit 0c08754b59
("drm/panel: Add device_link from panel device to DRM device")
creates a circular dependency under these circumstances:
1. The panel depends on dsi-host because it is MIPI-DSI child
device.
2. dsi-host depends on the drm parent device (connector->dev->dev)
this should be allowed.
3. drm parent dev (connector->dev->dev) depends on the panel
after this patch.
This makes the dependency circular and while it appears it
does not affect any in-tree drivers (they do not seem to have
dsi hosts depending on the same parent device) this does not
seem right.
As noted in a response from Andrzej Hajda, the intent is
likely to make the panel dependent on the DRM device
(connector->dev) not its parent. But we have no way of
doing that since the DRM device doesn't contain any
struct device on its own (arguably it should).
Revert this until a proper approach is figured out.
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180927124130.9102-1-linus.walleij@linaro.org
having a delayed work item per job is redundant as we only need one
per scheduler to track the time out the currently executing job.
v2: the first element of the ring mirror list is the currently
executing job so we don't need a additional variable for it
v3: squash in fixes for v3d and etnaviv
Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clang generates warnings when one enumerated type is implicitly
converted to another.
drivers/gpu/drm/amd/amdgpu/../powerplay/hwmgr/ppatomfwctrl.c:532:57:
warning: implicit conversion from enumeration type 'enum
atom_smu11_syspll0_clock_id' to different enumeration type 'BIOS_CLKID'
(aka 'enum atom_smu9_syspll0_clock_id') [-Wenum-conversion]
if (!pp_atomfwctrl_get_clk_information_by_clkid(hwmgr,
SMU11_SYSPLL0_SOCCLK_ID, &frequency))
In this case, that is expected behavior. To make that clear to Clang
without explicitly casting these values, change id's type to uint8_t
in pp_atomfwctrl_get_clk_information_by_clkid so no conversion happens.
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Firmware have the workaround to replace the atomic Ops with read-modify-write on CP side.
User should not expect atomic Ops on system memory works normally if system didn't not
support it.
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-By: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Typically when we look up objects under the rcu lock, we take a reference
to make sure the returned object pointer is valid.
Now provide a function to look up an object and instead of taking a
reference to it, keep the rcu lock held when returning the object pointer.
This means that the object pointer is valid as long as the rcu lock is
held, but the object may be doomed (its refcount may be zero). Any
persistent usage of the object pointer outside of the rcu lock requires
a reference to be taken using kref_get_unless_zero().
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Instead of generating user-space object handles based on a, possibly
processed, hash of the kernel address of the object, use idr to generate
and lookup those handles. This might improve somewhat on security since
we loose all connections to the object's kernel address. Also idr is
designed to do just this.
As a todo-item, since user-space handles are now generated in sequence,
we can probably use a much simpler hash function to hash them.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
We were checking that the resource destructor matched that of the
intended object type, to make sure the looked up resource was of the
right type.
But we already have an object type check in place which makes sure the
resource is of the right type.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
This field was previously used to prevent a lookup of a resource before its
constructor had run to its end. This was mainly intended for an interface
that is now removed that allowed looking up a resource by its device id.
Currently all affected resources are added to the lookup mechanism (its
TTM prime object is initialized) late in the constructor where it's OK to
look up the resource.
This means we can change the device resource_lock to an ordinary spinlock
instead of an rwlock and remove a locking sequence during lookup.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Replace instances of WARN_ON[_ONCE](!mutex_is_held()) with
lockdep_assert_held(). This makes sure the checking process actually
holds the mutex and also removes the checks from release builds
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
With the new allocator this leads to less consumed memory for each
user-space command submission
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
A common trait of these objects are that they are allocated during the
command validation phase and freed after command submission. Furthermore
they are accessed by a single thread only. So provide a simple unprotected
stack-like allocator from which these objects can be allocated. Their
memory is freed with the validation context when the command submission
is done.
Note that the mm subsystem maintains a per-cpu cache of single pages to
make single page allocation and freeing efficient.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Strip the old KMS helpers and use the new validation interface also in
the modesetting code.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com> #v1
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Strip the old execbuf validation functionality and use the new API instead.
Also use the new API for a now removed execbuf function that was called
from the kms code.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Allow selecting interruptible or uninterruptible waits to match
expectations of callers.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Isolate the functionality needed for reservation, validation and fencing
of vmwgfx buffer objects and resources and publish an API for this.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com> #v1
No other driver is using this functionality so move it out of TTM and
into the vmwgfx driver. Update includes and remove exports.
Also annotate to remove false static analyzer lock balance warnings.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
If the request is currently on the HW (in port 0), then we do not need
to kick the submission tasklet to evaluate whether we should be
preempting itself in order to execute it again.
In the case that was annoying me:
execlists_schedule: rq(18:211173).prio=0 -> 2
need_preempt: last(18:211174).prio=0, queue.prio=2
We are bumping the priority of the first of a pair of requests running
in the current context. Then when evaluating preempt, we would see that
that our priority request is higher than the last executing request in
ELSP0 and so trigger preemption, not realising that our intended request
was already executing.
v2: As we assume state of the execlists->port[] that is only valid while
we hold the timeline lock we have to repeat some earlier tests that on
the validity of the node.
v3: Wrap guc submission under the timeline.lock as is now the way of all
things.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180925083205.2229-2-chris@chris-wilson.co.uk
This panel is marketed as Banana Pi 7" LCD display. On the back is
a sticker denoting the model name S070WV20-CT16.
This is a 7" 800x480 panel connected through a 24-bit RGB interface.
However the panel only does 262k colors.
Depending on the variant, the PCB attached to the panel module either
supports DSI, or DSI + 24-bit RGB. DSI is converted to 24-bit RGB via
an onboard ICN6211 MIPI DSI - RGB bridge chip, then fed to the panel
itself.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180907041948.19913-5-wens@csie.org
So far we have only been calling
drm_connector_init_panel_orientation_property(), which checks for
panel orientation quirks in the drm_panel_orientation_quirks.c file,
for DSI panels as so far only devices with DSI panels have had panels
which are not mounted up right.
The new GPD win2 device uses a portrait screen in a landscape case,
so now we've a device with an eDP panel which needs the panel-orientation
property to let the fbcon code and userspace know that the image needs to
be fixed-up.
This commit makes intel_edp_init_connector() call
drm_connector_init_panel_orientation_property() so that the property
gets added.
Reported-and-tested-by: russianneuromancer@ya.ru
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180909133457.10636-2-hdegoede@redhat.com
The variable is declared in an #ifdef section, but the user is
now unconditional, which leads to a build failure:
drivers/gpu/drm/imx/imx-drm-core.c: In function 'imx_drm_bind':
drivers/gpu/drm/imx/imx-drm-core.c:264:6: error: 'legacyfb_depth' undeclared (first use in this function); did you mean 'lockdep_depth'?
Remove the remaining #ifdef as well.
Fixes: f53705fd98 ("drm/imx: Use drm_fbdev_generic_setup()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180926193846.2490574-1-arnd@arndb.de
