Build error is encountered when inlcuding <asm/rtas.h> if no explicit or
implicit include of cpumask.h exists in the including file.
In file included from arch/powerpc/platforms/pseries/hotplug-pci.c:3:0:
./arch/powerpc/include/asm/rtas.h:360:34: error: unknown type name 'cpumask_var_t'
extern int rtas_online_cpus_mask(cpumask_var_t cpus);
^
./arch/powerpc/include/asm/rtas.h:361:35: error: unknown type name 'cpumask_var_t'
extern int rtas_offline_cpus_mask(cpumask_var_t cpus);
Fixes: 120496ac2d ("powerpc: Bring all threads online prior to migration/hibernation")
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This changes the KVM code that emulates the decrementer function to do
the conversion of decrementer values to time intervals in nanoseconds
by calling the tb_to_ns() function exported by the powerpc timer code,
in preference to open-coded arithmetic using values from the
decrementer_clockevent struct. Similarly, the HV-KVM code that did
the same conversion using arithmetic on tb_ticks_per_sec also now
uses tb_to_ns().
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch exports the maximum possible amount of memory
configured on the system via /proc/powerpc/lparcfg.
Signed-off-by: Aravinda Prasad <aravinda@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The 8xx TLB miss routines are patched when (de)activating
perf counters.
This patch uses the new patch_site functionality in order
to get a better code readability and avoid a label mess when
dumping the code with 'objdump -d'
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The 8xx TLB miss routines are patched at startup at several places.
This patch uses the new patch_site functionality in order
to get a better code readability and avoid a label mess when
dumping the code with 'objdump -d'
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds a helper to get the address of a patch_site.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Call it "patch site" addr]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This reverts commit 4f94b2c746.
That commit was buggy, as it used rlwinm instead of rlwimi.
Instead of fixing that bug, we revert the previous commit in order to
reduce the dependency between L1 entries and L2 entries
Fixes: 4f94b2c746 ("powerpc/8xx: Use L1 entry APG to handle _PAGE_ACCESSED for CONFIG_SWAP")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Pull KVM updates from Radim Krčmář:
"ARM:
- Improved guest IPA space support (32 to 52 bits)
- RAS event delivery for 32bit
- PMU fixes
- Guest entry hardening
- Various cleanups
- Port of dirty_log_test selftest
PPC:
- Nested HV KVM support for radix guests on POWER9. The performance
is much better than with PR KVM. Migration and arbitrary level of
nesting is supported.
- Disable nested HV-KVM on early POWER9 chips that need a particular
hardware bug workaround
- One VM per core mode to prevent potential data leaks
- PCI pass-through optimization
- merge ppc-kvm topic branch and kvm-ppc-fixes to get a better base
s390:
- Initial version of AP crypto virtualization via vfio-mdev
- Improvement for vfio-ap
- Set the host program identifier
- Optimize page table locking
x86:
- Enable nested virtualization by default
- Implement Hyper-V IPI hypercalls
- Improve #PF and #DB handling
- Allow guests to use Enlightened VMCS
- Add migration selftests for VMCS and Enlightened VMCS
- Allow coalesced PIO accesses
- Add an option to perform nested VMCS host state consistency check
through hardware
- Automatic tuning of lapic_timer_advance_ns
- Many fixes, minor improvements, and cleanups"
* tag 'kvm-4.20-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (204 commits)
KVM/nVMX: Do not validate that posted_intr_desc_addr is page aligned
Revert "kvm: x86: optimize dr6 restore"
KVM: PPC: Optimize clearing TCEs for sparse tables
x86/kvm/nVMX: tweak shadow fields
selftests/kvm: add missing executables to .gitignore
KVM: arm64: Safety check PSTATE when entering guest and handle IL
KVM: PPC: Book3S HV: Don't use streamlined entry path on early POWER9 chips
arm/arm64: KVM: Enable 32 bits kvm vcpu events support
arm/arm64: KVM: Rename function kvm_arch_dev_ioctl_check_extension()
KVM: arm64: Fix caching of host MDCR_EL2 value
KVM: VMX: enable nested virtualization by default
KVM/x86: Use 32bit xor to clear registers in svm.c
kvm: x86: Introduce KVM_CAP_EXCEPTION_PAYLOAD
kvm: vmx: Defer setting of DR6 until #DB delivery
kvm: x86: Defer setting of CR2 until #PF delivery
kvm: x86: Add payload operands to kvm_multiple_exception
kvm: x86: Add exception payload fields to kvm_vcpu_events
kvm: x86: Add has_payload and payload to kvm_queued_exception
KVM: Documentation: Fix omission in struct kvm_vcpu_events
KVM: selftests: add Enlightened VMCS test
...
Pull timekeeping updates from Thomas Gleixner:
"The timers and timekeeping departement provides:
- Another large y2038 update with further preparations for providing
the y2038 safe timespecs closer to the syscalls.
- An overhaul of the SHCMT clocksource driver
- SPDX license identifier updates
- Small cleanups and fixes all over the place"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits)
tick/sched : Remove redundant cpu_online() check
clocksource/drivers/dw_apb: Add reset control
clocksource: Remove obsolete CLOCKSOURCE_OF_DECLARE
clocksource/drivers: Unify the names to timer-* format
clocksource/drivers/sh_cmt: Add R-Car gen3 support
dt-bindings: timer: renesas: cmt: document R-Car gen3 support
clocksource/drivers/sh_cmt: Properly line-wrap sh_cmt_of_table[] initializer
clocksource/drivers/sh_cmt: Fix clocksource width for 32-bit machines
clocksource/drivers/sh_cmt: Fixup for 64-bit machines
clocksource/drivers/sh_tmu: Convert to SPDX identifiers
clocksource/drivers/sh_mtu2: Convert to SPDX identifiers
clocksource/drivers/sh_cmt: Convert to SPDX identifiers
clocksource/drivers/renesas-ostm: Convert to SPDX identifiers
clocksource: Convert to using %pOFn instead of device_node.name
tick/broadcast: Remove redundant check
RISC-V: Request newstat syscalls
y2038: signal: Change rt_sigtimedwait to use __kernel_timespec
y2038: socket: Change recvmmsg to use __kernel_timespec
y2038: sched: Change sched_rr_get_interval to use __kernel_timespec
y2038: utimes: Rework #ifdef guards for compat syscalls
...
Pull PCI updates from Bjorn Helgaas:
- Fix ASPM link_state teardown on removal (Lukas Wunner)
- Fix misleading _OSC ASPM message (Sinan Kaya)
- Make _OSC optional for PCI (Sinan Kaya)
- Don't initialize ASPM link state when ACPI_FADT_NO_ASPM is set
(Patrick Talbert)
- Remove x86 and arm64 node-local allocation for host bridge structures
(Punit Agrawal)
- Pay attention to device-specific _PXM node values (Jonathan Cameron)
- Support new Immediate Readiness bit (Felipe Balbi)
- Differentiate between pciehp surprise and safe removal (Lukas Wunner)
- Remove unnecessary pciehp includes (Lukas Wunner)
- Drop pciehp hotplug_slot_ops wrappers (Lukas Wunner)
- Tolerate PCIe Slot Presence Detect being hardwired to zero to
workaround broken hardware, e.g., the Wilocity switch/wireless device
(Lukas Wunner)
- Unify pciehp controller & slot structs (Lukas Wunner)
- Constify hotplug_slot_ops (Lukas Wunner)
- Drop hotplug_slot_info (Lukas Wunner)
- Embed hotplug_slot struct into users instead of allocating it
separately (Lukas Wunner)
- Initialize PCIe port service drivers directly instead of relying on
initcall ordering (Keith Busch)
- Restore PCI config state after a slot reset (Keith Busch)
- Save/restore DPC config state along with other PCI config state
(Keith Busch)
- Reference count devices during AER handling to avoid race issue with
concurrent hot removal (Keith Busch)
- If an Upstream Port reports ERR_FATAL, don't try to read the Port's
config space because it is probably unreachable (Keith Busch)
- During error handling, use slot-specific reset instead of secondary
bus reset to avoid link up/down issues on hotplug ports (Keith Busch)
- Restore previous AER/DPC handling that does not remove and
re-enumerate devices on ERR_FATAL (Keith Busch)
- Notify all drivers that may be affected by error recovery resets
(Keith Busch)
- Always generate error recovery uevents, even if a driver doesn't have
error callbacks (Keith Busch)
- Make PCIe link active reporting detection generic (Keith Busch)
- Support D3cold in PCIe hierarchies during system sleep and runtime,
including hotplug and Thunderbolt ports (Mika Westerberg)
- Handle hpmemsize/hpiosize kernel parameters uniformly, whether slots
are empty or occupied (Jon Derrick)
- Remove duplicated include from pci/pcie/err.c and unused variable
from cpqphp (YueHaibing)
- Remove driver pci_cleanup_aer_uncorrect_error_status() calls (Oza
Pawandeep)
- Uninline PCI bus accessors for better ftracing (Keith Busch)
- Remove unused AER Root Port .error_resume method (Keith Busch)
- Use kfifo in AER instead of a local version (Keith Busch)
- Use threaded IRQ in AER bottom half (Keith Busch)
- Use managed resources in AER core (Keith Busch)
- Reuse pcie_port_find_device() for AER injection (Keith Busch)
- Abstract AER interrupt handling to disconnect error injection (Keith
Busch)
- Refactor AER injection callbacks to simplify future improvments
(Keith Busch)
- Remove unused Netronome NFP32xx Device IDs (Jakub Kicinski)
- Use bitmap_zalloc() for dma_alias_mask (Andy Shevchenko)
- Add switch fall-through annotations (Gustavo A. R. Silva)
- Remove unused Switchtec quirk variable (Joshua Abraham)
- Fix pci.c kernel-doc warning (Randy Dunlap)
- Remove trivial PCI wrappers for DMA APIs (Christoph Hellwig)
- Add Intel GPU device IDs to spurious interrupt quirk (Bin Meng)
- Run Switchtec DMA aliasing quirk only on NTB endpoints to avoid
useless dmesg errors (Logan Gunthorpe)
- Update Switchtec NTB documentation (Wesley Yung)
- Remove redundant "default n" from Kconfig (Bartlomiej Zolnierkiewicz)
- Avoid panic when drivers enable MSI/MSI-X twice (Tonghao Zhang)
- Add PCI support for peer-to-peer DMA (Logan Gunthorpe)
- Add sysfs group for PCI peer-to-peer memory statistics (Logan
Gunthorpe)
- Add PCI peer-to-peer DMA scatterlist mapping interface (Logan
Gunthorpe)
- Add PCI configfs/sysfs helpers for use by peer-to-peer users (Logan
Gunthorpe)
- Add PCI peer-to-peer DMA driver writer's documentation (Logan
Gunthorpe)
- Add block layer flag to indicate driver support for PCI peer-to-peer
DMA (Logan Gunthorpe)
- Map Infiniband scatterlists for peer-to-peer DMA if they contain P2P
memory (Logan Gunthorpe)
- Register nvme-pci CMB buffer as PCI peer-to-peer memory (Logan
Gunthorpe)
- Add nvme-pci support for PCI peer-to-peer memory in requests (Logan
Gunthorpe)
- Use PCI peer-to-peer memory in nvme (Stephen Bates, Steve Wise,
Christoph Hellwig, Logan Gunthorpe)
- Cache VF config space size to optimize enumeration of many VFs
(KarimAllah Ahmed)
- Remove unnecessary <linux/pci-ats.h> include (Bjorn Helgaas)
- Fix VMD AERSID quirk Device ID matching (Jon Derrick)
- Fix Cadence PHY handling during probe (Alan Douglas)
- Signal Cadence Endpoint interrupts via AXI region 0 instead of last
region (Alan Douglas)
- Write Cadence Endpoint MSI interrupts with 32 bits of data (Alan
Douglas)
- Remove redundant controller tests for "device_type == pci" (Rob
Herring)
- Document R-Car E3 (R8A77990) bindings (Tho Vu)
- Add device tree support for R-Car r8a7744 (Biju Das)
- Drop unused mvebu PCIe capability code (Thomas Petazzoni)
- Add shared PCI bridge emulation code (Thomas Petazzoni)
- Convert mvebu to use shared PCI bridge emulation (Thomas Petazzoni)
- Add aardvark Root Port emulation (Thomas Petazzoni)
- Support 100MHz/200MHz refclocks for i.MX6 (Lucas Stach)
- Add initial power management for i.MX7 (Leonard Crestez)
- Add PME_Turn_Off support for i.MX7 (Leonard Crestez)
- Fix qcom runtime power management error handling (Bjorn Andersson)
- Update TI dra7xx unaligned access errata workaround for host mode as
well as endpoint mode (Vignesh R)
- Fix kirin section mismatch warning (Nathan Chancellor)
- Remove iproc PAXC slot check to allow VF support (Jitendra Bhivare)
- Quirk Keystone K2G to limit MRRS to 256 (Kishon Vijay Abraham I)
- Update Keystone to use MRRS quirk for host bridge instead of open
coding (Kishon Vijay Abraham I)
- Refactor Keystone link establishment (Kishon Vijay Abraham I)
- Simplify and speed up Keystone link training (Kishon Vijay Abraham I)
- Remove unused Keystone host_init argument (Kishon Vijay Abraham I)
- Merge Keystone driver files into one (Kishon Vijay Abraham I)
- Remove redundant Keystone platform_set_drvdata() (Kishon Vijay
Abraham I)
- Rename Keystone functions for uniformity (Kishon Vijay Abraham I)
- Add Keystone device control module DT binding (Kishon Vijay Abraham
I)
- Use SYSCON API to get Keystone control module device IDs (Kishon
Vijay Abraham I)
- Clean up Keystone PHY handling (Kishon Vijay Abraham I)
- Use runtime PM APIs to enable Keystone clock (Kishon Vijay Abraham I)
- Clean up Keystone config space access checks (Kishon Vijay Abraham I)
- Get Keystone outbound window count from DT (Kishon Vijay Abraham I)
- Clean up Keystone outbound window configuration (Kishon Vijay Abraham
I)
- Clean up Keystone DBI setup (Kishon Vijay Abraham I)
- Clean up Keystone ks_pcie_link_up() (Kishon Vijay Abraham I)
- Fix Keystone IRQ status checking (Kishon Vijay Abraham I)
- Add debug messages for all Keystone errors (Kishon Vijay Abraham I)
- Clean up Keystone includes and macros (Kishon Vijay Abraham I)
- Fix Mediatek unchecked return value from devm_pci_remap_iospace()
(Gustavo A. R. Silva)
- Fix Mediatek endpoint/port matching logic (Honghui Zhang)
- Change Mediatek Root Port Class Code to PCI_CLASS_BRIDGE_PCI (Honghui
Zhang)
- Remove redundant Mediatek PM domain check (Honghui Zhang)
- Convert Mediatek to pci_host_probe() (Honghui Zhang)
- Fix Mediatek MSI enablement (Honghui Zhang)
- Add Mediatek system PM support for MT2712 and MT7622 (Honghui Zhang)
- Add Mediatek loadable module support (Honghui Zhang)
- Detach VMD resources after stopping root bus to prevent orphan
resources (Jon Derrick)
- Convert pcitest build process to that used by other tools (iio, perf,
etc) (Gustavo Pimentel)
* tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits)
PCI/AER: Refactor error injection fallbacks
PCI/AER: Abstract AER interrupt handling
PCI/AER: Reuse existing pcie_port_find_device() interface
PCI/AER: Use managed resource allocations
PCI: pcie: Remove redundant 'default n' from Kconfig
PCI: aardvark: Implement emulated root PCI bridge config space
PCI: mvebu: Convert to PCI emulated bridge config space
PCI: mvebu: Drop unused PCI express capability code
PCI: Introduce PCI bridge emulated config space common logic
PCI: vmd: Detach resources after stopping root bus
nvmet: Optionally use PCI P2P memory
nvmet: Introduce helper functions to allocate and free request SGLs
nvme-pci: Add support for P2P memory in requests
nvme-pci: Use PCI p2pmem subsystem to manage the CMB
IB/core: Ensure we map P2P memory correctly in rdma_rw_ctx_[init|destroy]()
block: Add PCI P2P flag for request queue
PCI/P2PDMA: Add P2P DMA driver writer's documentation
docs-rst: Add a new directory for PCI documentation
PCI/P2PDMA: Introduce configfs/sysfs enable attribute helpers
PCI/P2PDMA: Add PCI p2pmem DMA mappings to adjust the bus offset
...
Pull security subsystem updates from James Morris:
"In this patchset, there are a couple of minor updates, as well as some
reworking of the LSM initialization code from Kees Cook (these prepare
the way for ordered stackable LSMs, but are a valuable cleanup on
their own)"
* 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
LSM: Don't ignore initialization failures
LSM: Provide init debugging infrastructure
LSM: Record LSM name in struct lsm_info
LSM: Convert security_initcall() into DEFINE_LSM()
vmlinux.lds.h: Move LSM_TABLE into INIT_DATA
LSM: Convert from initcall to struct lsm_info
LSM: Remove initcall tracing
LSM: Rename .security_initcall section to .lsm_info
vmlinux.lds.h: Avoid copy/paste of security_init section
LSM: Correctly announce start of LSM initialization
security: fix LSM description location
keys: Fix the use of the C++ keyword "private" in uapi/linux/keyctl.h
seccomp: remove unnecessary unlikely()
security: tomoyo: Fix obsolete function
security/capabilities: remove check for -EINVAL
Pull siginfo updates from Eric Biederman:
"I have been slowly sorting out siginfo and this is the culmination of
that work.
The primary result is in several ways the signal infrastructure has
been made less error prone. The code has been updated so that manually
specifying SEND_SIG_FORCED is never necessary. The conversion to the
new siginfo sending functions is now complete, which makes it
difficult to send a signal without filling in the proper siginfo
fields.
At the tail end of the patchset comes the optimization of decreasing
the size of struct siginfo in the kernel from 128 bytes to about 48
bytes on 64bit. The fundamental observation that enables this is by
definition none of the known ways to use struct siginfo uses the extra
bytes.
This comes at the cost of a small user space observable difference.
For the rare case of siginfo being injected into the kernel only what
can be copied into kernel_siginfo is delivered to the destination, the
rest of the bytes are set to 0. For cases where the signal and the
si_code are known this is safe, because we know those bytes are not
used. For cases where the signal and si_code combination is unknown
the bits that won't fit into struct kernel_siginfo are tested to
verify they are zero, and the send fails if they are not.
I made an extensive search through userspace code and I could not find
anything that would break because of the above change. If it turns out
I did break something it will take just the revert of a single change
to restore kernel_siginfo to the same size as userspace siginfo.
Testing did reveal dependencies on preferring the signo passed to
sigqueueinfo over si->signo, so bit the bullet and added the
complexity necessary to handle that case.
Testing also revealed bad things can happen if a negative signal
number is passed into the system calls. Something no sane application
will do but something a malicious program or a fuzzer might do. So I
have fixed the code that performs the bounds checks to ensure negative
signal numbers are handled"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (80 commits)
signal: Guard against negative signal numbers in copy_siginfo_from_user32
signal: Guard against negative signal numbers in copy_siginfo_from_user
signal: In sigqueueinfo prefer sig not si_signo
signal: Use a smaller struct siginfo in the kernel
signal: Distinguish between kernel_siginfo and siginfo
signal: Introduce copy_siginfo_from_user and use it's return value
signal: Remove the need for __ARCH_SI_PREABLE_SIZE and SI_PAD_SIZE
signal: Fail sigqueueinfo if si_signo != sig
signal/sparc: Move EMT_TAGOVF into the generic siginfo.h
signal/unicore32: Use force_sig_fault where appropriate
signal/unicore32: Generate siginfo in ucs32_notify_die
signal/unicore32: Use send_sig_fault where appropriate
signal/arc: Use force_sig_fault where appropriate
signal/arc: Push siginfo generation into unhandled_exception
signal/ia64: Use force_sig_fault where appropriate
signal/ia64: Use the force_sig(SIGSEGV,...) in ia64_rt_sigreturn
signal/ia64: Use the generic force_sigsegv in setup_frame
signal/arm/kvm: Use send_sig_mceerr
signal/arm: Use send_sig_fault where appropriate
signal/arm: Use force_sig_fault where appropriate
...
The MPC885 has SEC engine version 1.2 with the following details:
- Number of Crypto channels: 1
- Exec Units: DEU, MDEU and AESU
- Available descriptors: 00010, 00100, 00110, 01000, 11000, 11010
It is also supposed to have descriptor 00000, but it doesn't work
properly so we keep it out for the moment.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <oss@buserror.net>
mpic_get_primary_version() is not defined when not using MPIC.
The compile error log like:
arch/powerpc/sysdev/built-in.o: In function `fsl_of_msi_probe':
fsl_msi.c:(.text+0x150c): undefined reference to `fsl_mpic_primary_get_version'
Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Reported-by: Radu Rendec <radu.rendec@gmail.com>
Fixes: 807d38b73b ("powerpc/mpic: Add get_version API both for internal and external use")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Recently in commit 7241d26e81 ("powerpc/64: properly initialise
the stackprotector canary on SMP.") we fixed a crash with stack
protector on SMP by initialising the stack canary in
cpu_idle_thread_init().
But this can also causes crashes, when a CPU comes back online after
being offline:
Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: pnv_smp_cpu_kill_self+0x2a0/0x2b0
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.19.0-rc3-gcc-7.3.1-00168-g4ffe713b7587 #94
Call Trace:
dump_stack+0xb0/0xf4 (unreliable)
panic+0x144/0x328
__stack_chk_fail+0x2c/0x30
pnv_smp_cpu_kill_self+0x2a0/0x2b0
cpu_die+0x48/0x70
arch_cpu_idle_dead+0x20/0x40
do_idle+0x274/0x390
cpu_startup_entry+0x38/0x50
start_secondary+0x5e4/0x600
start_secondary_prolog+0x10/0x14
Looking at the stack we see that the canary value in the stack frame
doesn't match the canary in the task/paca. That is because we have
reinitialised the task/paca value, but then the CPU coming online has
returned into a function using the old canary value. That causes the
comparison to fail.
Instead we can call boot_init_stack_canary() from start_secondary()
which never returns. This is essentially what the generic code does in
cpu_startup_entry() under #ifdef X86, we should make that non-x86
specific in a future patch.
Fixes: 7241d26e81 ("powerpc/64: properly initialise the stackprotector canary on SMP.")
Reported-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr>
According to the T2080RDB schematics, for the CS4315 PHY, the XFI 1 lane is
connected to SFP 2 and the XFI 2 lane is connected to SFP 1. Change the
device tree to reflect the correct PHY order and port association.
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: Scott Wood <oss@buserror.net>
The powernv platform maintains 2 TCE tables for VFIO - a hardware TCE
table and a table with userspace addresses. These tables are radix trees,
we allocate indirect levels when they are written to. Since
the memory allocation is problematic in real mode, we have 2 accessors
to the entries:
- for virtual mode: it allocates the memory and it is always expected
to return non-NULL;
- fr real mode: it does not allocate and can return NULL.
Also, DMA windows can span to up to 55 bits of the address space and since
we never have this much RAM, such windows are sparse. However currently
the SPAPR TCE IOMMU driver walks through all TCEs to unpin DMA memory.
Since we maintain a userspace addresses table for VFIO which is a mirror
of the hardware table, we can use it to know which parts of the DMA
window have not been mapped and skip these so does this patch.
The bare metal systems do not have this problem as they use a bypass mode
of a PHB which maps RAM directly.
This helps a lot with sparse DMA windows, reducing the shutdown time from
about 3 minutes per 1 billion TCEs to a few seconds for 32GB sparse guest.
Just skipping the last level seems to be good enough.
As non-allocating accessor is used now in virtual mode as well, rename it
from IOMMU_TABLE_USERSPACE_ENTRY_RM (real mode) to _RO (read only).
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
commit b96672dd84 ("powerpc: Machine check interrupt is a non-
maskable interrupt") added a call to nmi_enter() at the beginning of
machine check restart exception handler. Due to that, in_interrupt()
always returns true regardless of the state before entering the
exception, and die() panics even when the system was not already in
interrupt.
This patch calls nmi_exit() before calling die() in order to restore
the interrupt state we had before calling nmi_enter()
Fixes: b96672dd84 ("powerpc: Machine check interrupt is a non-maskable interrupt")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The recent module relocation overflow crash demonstrated that we
have no range checking on REL32 relative relocations. This patch
implements a basic check, the same kernel that previously oopsed
and rebooted now continues with some of these errors when loading
the module:
module_64: x_tables: REL32 527703503449812 out of range!
Possibly other relocations (ADDR32, REL16, TOC16, etc.) should also have
overflow checks.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When we're running on Book3S with the Radix MMU enabled the page table
dump currently prints the wrong addresses because it uses the wrong
start address.
Fix it to use PAGE_OFFSET rather than KERN_VIRT_START.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
At boot we print the ranges we've mapped for the linear mapping and
what page size we've used. Also track whether the range is mapped
executable or not and display that as well.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
If we look closely at the logic in create_physical_mapping(), when
we're doing STRICT_KERNEL_RWX, we do the following steps:
- determine the gap from where we are to the end of the range
- choose an appropriate mapping_size based on the gap
- check if that mapping_size would overlap the __init_begin
boundary, and if not choose an appropriate mapping_size
We can simplify the logic by taking the __init_begin boundary into
account when we calculate the initial gap.
So add a next_boundary() function which tells us what the next
boundary is, either the __init_begin boundary or end. In future we can
add more boundaries.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When we have CONFIG_STRICT_KERNEL_RWX enabled, we want to split the
linear mapping at the text/data boundary so we can map the kernel
text read only.
The current logic uses a goto inside the for loop, which works, but is
hard to reason about.
When we hit the goto retry case we set max_mapping_size to PMD_SIZE
and go back to the start.
Setting max_mapping_size means we skip the PUD case and go to the PMD
case.
We know we will pass the alignment and gap checks because the only
reason we are there is we hit the goto retry, and that is guarded by
mapping_size == PUD_SIZE, which means addr is PUD aligned and gap is
greater or equal to PUD_SIZE.
So the only part of the check that can fail is the mmu_psize_defs
check for the 2M page size.
If we just duplicate that check we can avoid the goto, and we get the
same result.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When we have CONFIG_STRICT_KERNEL_RWX enabled, we want to split the
linear mapping at the text/data boundary so we can map the kernel
text read only.
Currently we always use a small page at the text/data boundary, even
when that's not necessary:
Mapped 0x0000000000000000-0x0000000000e00000 with 2.00 MiB pages
Mapped 0x0000000000e00000-0x0000000001000000 with 64.0 KiB pages
Mapped 0x0000000001000000-0x0000000040000000 with 2.00 MiB pages
This is because the check that the mapping crosses the __init_begin
boundary is too strict, it also returns true when we map exactly up to
the boundary.
So fix it to check that the mapping would actually map past
__init_begin, and with that we see:
Mapped 0x0000000000000000-0x0000000040000000 with 2.00 MiB pages
Mapped 0x0000000040000000-0x0000000100000000 with 1.00 GiB pages
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When we have CONFIG_STRICT_KERNEL_RWX enabled, we want to split the
linear mapping at the text/data boundary so we can map the kernel text
read only.
But the current logic uses small pages for the entire text section,
regardless of whether a larger page size would fit. eg. with the
boundary at 16M we could use 2M pages, but instead we use 64K pages up
to the 16M boundary:
Mapped 0x0000000000000000-0x0000000001000000 with 64.0 KiB pages
Mapped 0x0000000001000000-0x0000000040000000 with 2.00 MiB pages
Mapped 0x0000000040000000-0x0000000100000000 with 1.00 GiB pages
This is because the test is checking if addr is < __init_begin
and addr + mapping_size is >= _stext. But that is true for all pages
between _stext and __init_begin.
Instead what we want to check is if we are crossing the text/data
boundary, which is at __init_begin. With that fixed we see:
Mapped 0x0000000000000000-0x0000000000e00000 with 2.00 MiB pages
Mapped 0x0000000000e00000-0x0000000001000000 with 64.0 KiB pages
Mapped 0x0000000001000000-0x0000000040000000 with 2.00 MiB pages
Mapped 0x0000000040000000-0x0000000100000000 with 1.00 GiB pages
ie. we're correctly using 2MB pages below __init_begin, but we still
drop down to 64K pages unnecessarily at the boundary.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When we have CONFIG_STRICT_KERNEL_RWX enabled, we try to split the
kernel linear (1:1) mapping so that the kernel text is in a separate
page to kernel data, so we can mark the former read-only.
We could achieve that just by always using 64K pages for the linear
mapping, but we try to be smarter. Instead we use huge pages when
possible, and only switch to smaller pages when necessary.
However we have an off-by-one bug in that logic, which causes us to
calculate the wrong boundary between text and data.
For example with the end of the kernel text at 16M we see:
radix-mmu: Mapped 0x0000000000000000-0x0000000001200000 with 64.0 KiB pages
radix-mmu: Mapped 0x0000000001200000-0x0000000040000000 with 2.00 MiB pages
radix-mmu: Mapped 0x0000000040000000-0x0000000100000000 with 1.00 GiB pages
ie. we mapped from 0 to 18M with 64K pages, even though the boundary
between text and data is at 16M.
With the fix we see we're correctly hitting the 16M boundary:
radix-mmu: Mapped 0x0000000000000000-0x0000000001000000 with 64.0 KiB pages
radix-mmu: Mapped 0x0000000001000000-0x0000000040000000 with 2.00 MiB pages
radix-mmu: Mapped 0x0000000040000000-0x0000000100000000 with 1.00 GiB pages
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently, we expect to be able to reach ftrace_caller() from all
ftrace-enabled functions through a single relative branch. With large
kernel configs, we see functions outside of 32MB of ftrace_caller()
causing ftrace_init() to bail.
In such configurations, gcc/ld emits two types of trampolines for mcount():
1. A long_branch, which has a single branch to mcount() for functions that
are one hop away from mcount():
c0000000019e8544 <00031b56.long_branch._mcount>:
c0000000019e8544: 4a 69 3f ac b c00000000007c4f0 <._mcount>
2. A plt_branch, for functions that are farther away from mcount():
c0000000051f33f8 <0008ba04.plt_branch._mcount>:
c0000000051f33f8: 3d 82 ff a4 addis r12,r2,-92
c0000000051f33fc: e9 8c 04 20 ld r12,1056(r12)
c0000000051f3400: 7d 89 03 a6 mtctr r12
c0000000051f3404: 4e 80 04 20 bctr
We can reuse those trampolines for ftrace if we can have those
trampolines go to ftrace_caller() instead. However, with ABIv2, we
cannot depend on r2 being valid. As such, we use only the long_branch
trampolines by patching those to instead branch to ftrace_caller or
ftrace_regs_caller.
In addition, we add additional trampolines around .text and .init.text
to catch locations that are covered by the plt branches. This allows
ftrace to work with most large kernel configurations.
For now, we always patch the trampolines to go to ftrace_regs_caller,
which is slightly inefficient. This can be optimized further at a later
point.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
If CONFIG_PPC_SPLPAR is not selected, steal_time will always
be NUL, so accounting it is pointless
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
scaled cputime is only meaningfull when the processor has
SPURR and/or PURR, which means only on PPC64.
Removing it on PPC32 significantly reduces the size of
vtime_account_system() and vtime_account_idle() on an 8xx:
Before:
00000000 l F .text 000000a8 vtime_delta
00000280 g F .text 0000010c vtime_account_system
0000038c g F .text 00000048 vtime_account_idle
After:
(vtime_delta gets inlined inside the two functions)
000001d8 g F .text 000000a0 vtime_account_system
00000278 g F .text 00000038 vtime_account_idle
In terms of performance, we also get approximatly 7% improvement on
task switch. The following small benchmark app is run with perf stat:
void *thread(void *arg)
{
int i;
for (i = 0; i < atoi((char*)arg); i++)
pthread_yield();
}
int main(int argc, char **argv)
{
pthread_t th1, th2;
pthread_create(&th1, NULL, thread, argv[1]);
pthread_create(&th2, NULL, thread, argv[1]);
pthread_join(th1, NULL);
pthread_join(th2, NULL);
return 0;
}
Before the patch:
Performance counter stats for 'chrt -f 98 ./sched 100000' (50 runs):
8228.476465 task-clock (msec) # 0.954 CPUs utilized ( +- 0.23% )
200004 context-switches # 0.024 M/sec ( +- 0.00% )
After the patch:
Performance counter stats for 'chrt -f 98 ./sched 100000' (50 runs):
7649.070444 task-clock (msec) # 0.955 CPUs utilized ( +- 0.27% )
200004 context-switches # 0.026 M/sec ( +- 0.00% )
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
scaled cputime is only meaningfull when the processor has
SPURR and/or PURR, which means only on PPC64.
In preparation of the following patch that will remove
CONFIG_ARCH_HAS_SCALED_CPUTIME on PPC32, this patch moves
all scaled cputing accounting logic into dedicated functions.
This patch doesn't change any functionality. It's only code
reorganisation.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
ipic_get_mcp_status() is used by targets implementing NMI
watchdog in target specific machine check handler in order
to known whether a machine check results from a watchdog
NMI reset.
In case of very early machine check, primary_ipic pointer
might not have been set yet, so ipic_get_mcp_status() needs
to check it for nullity before using it.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch fixes the following warnings (obtained with make W=1).
arch/powerpc/mm/slice.c: In function 'slice_range_to_mask':
arch/powerpc/mm/slice.c:73:12: error: comparison is always true due to limited range of data type [-Werror=type-limits]
if (start < SLICE_LOW_TOP) {
^
arch/powerpc/mm/slice.c:81:20: error: comparison is always false due to limited range of data type [-Werror=type-limits]
if ((start + len) > SLICE_LOW_TOP) {
^
arch/powerpc/mm/slice.c: In function 'slice_mask_for_free':
arch/powerpc/mm/slice.c:136:17: error: comparison is always true due to limited range of data type [-Werror=type-limits]
if (high_limit <= SLICE_LOW_TOP)
^
arch/powerpc/mm/slice.c: In function 'slice_check_range_fits':
arch/powerpc/mm/slice.c:185:12: error: comparison is always true due to limited range of data type [-Werror=type-limits]
if (start < SLICE_LOW_TOP) {
^
arch/powerpc/mm/slice.c:195:39: error: comparison is always false due to limited range of data type [-Werror=type-limits]
if (SLICE_NUM_HIGH && ((start + len) > SLICE_LOW_TOP)) {
^
arch/powerpc/mm/slice.c: In function 'slice_scan_available':
arch/powerpc/mm/slice.c:306:11: error: comparison is always true due to limited range of data type [-Werror=type-limits]
if (addr < SLICE_LOW_TOP) {
^
arch/powerpc/mm/slice.c: In function 'get_slice_psize':
arch/powerpc/mm/slice.c:709:11: error: comparison is always true due to limited range of data type [-Werror=type-limits]
if (addr < SLICE_LOW_TOP) {
^
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch fixes the following warnings (obtained with make W=1).
arch/powerpc/mm/slice.c: At top level:
arch/powerpc/mm/slice.c:682:15: error: no previous prototype for 'arch_get_unmapped_area' [-Werror=missing-prototypes]
unsigned long arch_get_unmapped_area(struct file *filp,
^
arch/powerpc/mm/slice.c:692:15: error: no previous prototype for 'arch_get_unmapped_area_topdown' [-Werror=missing-prototypes]
unsigned long arch_get_unmapped_area_topdown(struct file *filp,
^
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add a trace point for tlbia (Translation Lookaside Buffer Invalidate
All) instruction.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Since commit bd0dbb73e0 ("powerpc/mm/books3s: Add new pte bit to
mark pte temporarily invalid."), _PAGE_PRESENT doesn't mean exactly
that a page is present. A page is also considered preset when
_PAGE_INVALID is set.
This patch changes the meaning of "present" and adds a status "valid"
associated to the _PAGE_PRESENT flag.
Fixes: bd0dbb73e0 ("powerpc/mm/books3s: Add new pte bit to mark pte temporarily invalid.")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch exports the raw per-CPU VPA data via debugfs.
A per-CPU file is created which exports the VPA data of
that CPU to help debug some of the VPA related issues or
to analyze the per-CPU VPA related statistics.
v3: Removed offline CPU check.
v2: Included offline CPU check and other review comments.
Signed-off-by: Aravinda Prasad <aravinda@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
module_frob_arch_sections() is called before the module is moved to its
final location. The function descriptor section addresses we are setting
here are thus invalid. Fix this by processing opd section during
module_finalize()
Fixes: 5633e85b2c ("powerpc64: Add .opd based function descriptor dereference")
Cc: stable@vger.kernel.org # v4.16
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We implement regs_set_return_value() and override_function_with_return()
for this purpose.
On powerpc, a return from a function (blr) just branches to the location
contained in the link register. So, we can just update pt_regs rather
than redirecting execution to a dummy function that returns.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This disables the use of the streamlined entry path for radix guests
on early POWER9 chips that need the workaround added in commit
a25bd72bad ("powerpc/mm/radix: Workaround prefetch issue with KVM",
2017-07-24), because the streamlined entry path does not include
that workaround. This also means that we can't do nested HV-KVM
on those chips.
Since the chips that need that workaround are the same ones that can't
run both radix and HPT guests at the same time on different threads of
a core, we use the existing 'no_mixing_hpt_and_radix' variable that
identifies those chips to identify when we can't use the new guest
entry path, and when we can't do nested virtualization.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Like all other dma mapping drivers just return an error code instead
of an actual memory buffer. The reason for the overflow buffer was
that at the time swiotlb was invented there was no way to check for
dma mapping errors, but this has long been fixed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
In the recent commit 8b78fdb045 ("powerpc/time: Use
clockevents_register_device(), fixing an issue with large
decrementer") we changed the way we initialise the decrementer
clockevent(s).
We no longer initialise the mult & shift values of
decrementer_clockevent itself.
This has the effect of breaking PR KVM, because it uses those values
in kvmppc_emulate_dec(). The symptom is guest kernels spin forever
mid-way through boot.
For now fix it by assigning back to decrementer_clockevent the mult
and shift values.
Fixes: 8b78fdb045 ("powerpc/time: Use clockevents_register_device(), fixing an issue with large decrementer")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
I'm pretty sure this is dead code, it's only used by the a.out core
dump code, and we don't support a.out. We should remove it.
But while it's in the tree it should be using the ABI version of
pt_regs which is called user_pt_regs in the kernel, because the whole
struct is written to the core dump and so its size shouldn't change.
Note this isn't a uapi header so we don't need an ifdef.
Fixes: 002af9391b ("powerpc: Split user/kernel definitions of struct pt_regs")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
My recent patch to split pt_regs between user and kernel missed
the usage in struct sigcontext.
Because this is a user visible struct it should be using the user
visible definition, which when we're building for the kernel is called
struct user_pt_regs.
As far as I can see this hasn't actually caused a bug (yet), because
we don't use the sizeof() the sigcontext->regs anywhere. But we should
still fix it to avoid confusion and future bugs.
Fixes: 002af9391b ("powerpc: Split user/kernel definitions of struct pt_regs")
Reported-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Back when I added -Werror in commit ba55bd7436 ("powerpc: Add
configurable -Werror for arch/powerpc") I did it by adding it to most
of the arch Makefiles.
At the time we excluded math-emu, because apparently it didn't build
cleanly. But that seems to have been fixed somewhere in the interim.
So move the -Werror addition to the top-level of the arch, this saves
us from repeating it in every Makefile and means we won't forget to
add it to any new sub-dirs.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
