The HXT StarDragon 4800 REP2 (Reference Evaluation Platform) is
an aarch64 ARMv8 server platform with an ast2520 BMC.
Signed-off-by: Yuan Yao <yao.yuan@linaro.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
To fit with latest rtc driver updates, rtc st,syscfg property must contain
the control register offset of pwrcfg and the mask corresponding to the
DBP (Disable Backup Protection) bit.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
The R40 HDMI PHY seems to be different to the A64 one, the A64 one
has no input mux, but the R40 one has.
Drop the A64 fallback compatible from the HDMI PHY node in R40 DT.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
[wens@csie.org: Fix subject prefix order]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
dtc has new checks for I2C and SPI buses. Fix the warnings in node names
and unit-addresses.
arch/arm/boot/dts/at91-dvk_som60.dtb: Warning (i2c_bus_reg): /ahb/apb/i2c@f0018000/eeprom@87: I2C bus unit address format error, expected "57"
arch/arm/boot/dts/at91-dvk_som60.dtb: Warning (i2c_bus_reg): /ahb/apb/i2c@f0018000/ft5426@56: I2C bus unit address format error, expected "38"
arch/arm/boot/dts/at91-vinco.dtb: Warning (i2c_bus_reg): /ahb/apb/i2c@f8024000/rtc@64: I2C bus unit address format error, expected "32"
arch/arm/boot/dts/at91sam9260ek.dtb: Warning (spi_bus_reg): /ahb/apb/spi@fffc8000/mtd_dataflash@0: SPI bus unit address format error, expected "1"
arch/arm/boot/dts/at91sam9g20ek_2mmc.dtb: Warning (spi_bus_reg): /ahb/apb/spi@fffc8000/mtd_dataflash@0: SPI bus unit address format error, expected "1"
arch/arm/boot/dts/at91sam9g20ek.dtb: Warning (spi_bus_reg): /ahb/apb/spi@fffc8000/mtd_dataflash@0: SPI bus unit address format error, expected "1"
arch/arm/boot/dts/at91sam9261ek.dtb: Warning (spi_bus_reg): /ahb/apb/spi@fffc8000/tsc2046@0: SPI bus unit address format error, expected "2"
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
dtc has new checks for I2C and SPI buses. Fix the warnings in node names
and unit-addresses.
arch/arm/boot/dts/zynq-zc702.dtb: Warning (i2c_bus_reg): /amba/i2c@e0004000/i2c-mux@74/i2c@7/hwmon@52: I2C bus unit address format error, expected "34"
arch/arm/boot/dts/zynq-zc702.dtb: Warning (i2c_bus_reg): /amba/i2c@e0004000/i2c-mux@74/i2c@7/hwmon@53: I2C bus unit address format error, expected "35"
arch/arm/boot/dts/zynq-zc702.dtb: Warning (i2c_bus_reg): /amba/i2c@e0004000/i2c-mux@74/i2c@7/hwmon@54: I2C bus unit address format error, expected "36"
arch/arm/boot/dts/zynq-zc770-xm013.dtb: Warning (spi_bus_reg): /amba/spi@e0006000/eeprom@0: SPI bus unit address format error, expected "2"
arch/arm/boot/dts/zynq-zc770-xm010.dtb: Warning (spi_bus_reg): /amba/spi@e0007000/flash@0: SPI bus unit address format error, expected "1"
Cc: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Add the resets property for all the timers on the Cyclone5/Arria5/Arria10
platforms.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
We need this new compatibility string as we experienced different behavior
for this 10/100Mbits/s macb interface on this particular SoC.
Backward compatibility is preserved as we keep the alternative strings.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
dtc has new checks for SPI buses. The rk3036 dts file has a node named
spi' which causes false positive warnings. As the node is a pinctrl child
node, change the node name to be 'spi-pins' to fix the warnings.
arch/arm/boot/dts/rk3036-evb.dtb: Warning (spi_bus_bridge): /pinctrl/spi: incorrect #address-cells for SPI bus
arch/arm/boot/dts/rk3036-kylin.dtb: Warning (spi_bus_bridge): /pinctrl/spi: incorrect #address-cells for SPI bus
arch/arm/boot/dts/rk3036-evb.dtb: Warning (spi_bus_bridge): /pinctrl/spi: incorrect #size-cells for SPI bus
arch/arm/boot/dts/rk3036-kylin.dtb: Warning (spi_bus_bridge): /pinctrl/spi: incorrect #size-cells for SPI bus
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: linux-rockchip@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
- UART0 was missing the bus clock ("apb_pclk").
- Use recently accepted r9a06g032 and rzn1 compat strings.
- Add all the other UARTs.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
[simon: updated changelog]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
dtc has new checks for I2C buses. The sun9i-a80 dts file has a node named
'i2c' which causes a false positive warning. As the node is a RSB bus,
correct the node name to be 'rsb' to fix the warnings.
arch/arm/boot/dts/sun9i-a80-cubieboard4.dtb: Warning (i2c_bus_reg): /soc/i2c@8003400/codec@e89:reg: I2C address must be less than 10-bits, got "0xe89"
arch/arm/boot/dts/sun9i-a80-cubieboard4.dtb: Warning (i2c_bus_reg): /soc/i2c@8003400/pmic@745:reg: I2C address must be less than 10-bits, got "0x745"
arch/arm/boot/dts/sun9i-a80-optimus.dtb: Warning (i2c_bus_reg): /soc/i2c@8003400/codec@e89:reg: I2C address must be less than 10-bits, got "0xe89"
arch/arm/boot/dts/sun9i-a80-optimus.dtb: Warning (i2c_bus_reg): /soc/i2c@8003400/pmic@745:reg: I2C address must be less than 10-bits, got "0x745"
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
dtc has new checks for I2C buses. Fix the warnings in unit-addresses.
arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dtb: Warning (i2c_bus_reg): /soc/i2c@ffc04000/adxl345@0: I2C bus unit address format error, expected "53"
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Provide aliases to each i2c bus per labels added for
each PCIe slot, etc, that are downstream beyond a mux.
Signed-off-by: Patrick Venture <venture@google.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
dtc has new checks for I2C buses. The ASpeed dts files have a node named
'i2c' which causes a false positive warning. As the node is a 'simple-bus',
correct the node name to be 'bus' to fix the warnings.
arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dtb: Warning (i2c_bus_bridge): /ahb/apb/i2c@1e78a000: incorrect #size-cells for I2C bus
arch/arm/boot/dts/aspeed-bmc-opp-romulus.dtb: Warning (i2c_bus_bridge): /ahb/apb/i2c@1e78a000: incorrect #size-cells for I2C bus
arch/arm/boot/dts/aspeed-ast2500-evb.dtb: Warning (i2c_bus_bridge): /ahb/apb/i2c@1e78a000: incorrect #size-cells for I2C bus
arch/arm/boot/dts/aspeed-bmc-arm-centriq2400-rep.dtb: Warning (i2c_bus_bridge): /ahb/apb/i2c@1e78a000: incorrect #size-cells for I2C bus
arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dtb: Warning (i2c_bus_bridge): /ahb/apb/i2c@1e78a000: incorrect #size-cells for I2C bus
arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dtb: Warning (i2c_bus_bridge): /ahb/apb/i2c@1e78a000: incorrect #size-cells for I2C bus
arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dtb: Warning (i2c_bus_bridge): /ahb/apb/i2c@1e78a000: incorrect #size-cells for I2C bus
arch/arm/boot/dts/aspeed-bmc-opp-zaius.dtb: Warning (i2c_bus_bridge): /ahb/apb/i2c@1e78a000: incorrect #size-cells for I2C bus
arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dtb: Warning (i2c_bus_bridge): /ahb/apb/i2c@1e78a000: incorrect #size-cells for I2C bus
arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dtb: Warning (i2c_bus_bridge): /ahb/apb/i2c@1e78a000: incorrect #size-cells for I2C bus
Cc: Joel Stanley <joel@jms.id.au>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: linux-aspeed@lists.ozlabs.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
dtc has new checks for SPI buses. Fix the warnings in node names.
arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dtb: Warning (spi_bus_bridge): /axi@18000000/qspi@27200: node name for SPI buses should be 'spi'
arch/arm/boot/dts/bcm958525er.dtb: Warning (spi_bus_bridge): /axi/qspi@27200: node name for SPI buses should be 'spi'
arch/arm/boot/dts/bcm958525xmc.dtb: Warning (spi_bus_bridge): /axi/qspi@27200: node name for SPI buses should be 'spi'
arch/arm/boot/dts/bcm958622hr.dtb: Warning (spi_bus_bridge): /axi/qspi@27200: node name for SPI buses should be 'spi'
arch/arm/boot/dts/bcm958625hr.dtb: Warning (spi_bus_bridge): /axi/qspi@27200: node name for SPI buses should be 'spi'
arch/arm/boot/dts/bcm988312hr.dtb: Warning (spi_bus_bridge): /axi/qspi@27200: node name for SPI buses should be 'spi'
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Jon Mason <jonmason@broadcom.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
There are various places inside this dtsi file where 8 spaces where used
for indenting instead of tabs.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The PCI range is invalid and PCI attached devices doen't work.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
while compiling an ipq4019 target, dtc will complain:
regulator@b089000 unit address format error, expected "2089000"
The saw0 regulator reg value seems to be
copied and pasted from qcom-ipq8064.dtsi.
This patch fixes the reg value to match that of the
unit address which in turn silences the warning.
(There is no driver for qcom,saw2 right now.
So this went unnoticed)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds device tree bindings for the mpu6515 to the LG Nexus 5
(hammerhead) phone. Confirmed that the gyroscope / accelerometer
(mpu6515), magnetometer (ak8963), and temperature / pressure (bmp280)
sensors are available on the phone.
Interrupts are not working properly on the ak8963 magnetometer so they
are currently not configured.
The bmp280 retuns temperature/pressure measurement skipped errors but
will reliably work if I run:
echo 1 > in_pressure_oversampling_ratio
echo 1 > in_temp_oversampling_ratio
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The nodes in ipq8064-ap148.dts currently are common with
boards that we will add next. So move the common data to
ipq8064-v.1.0.dtsi.
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Change the third field of the "interrupts" property from
IRQ_TYPE_NONE to the correct value.
I do not have hardware documentation for these devices, so I
followed a mail list suggestion to copy the flag values from the same
type of node in arch/arm64/boot/dts/qcom/msm8916.dtsi
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Cosmetic change of integer value "0" in the third field of the
"interrupts" property to the correct named constant.
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Cosmetic change of integer value "4" in the third field of the
"interrupts" property to the correct named constant.
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Cosmetic change of integer value "1" in the third field of the
"interrupts" property to the correct named constant.
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Cosmetic change of integer value "0" in the first field of the
"interrupts" property to the correct named constant.
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Cosmetic change of integer value "1" in the first field of the
"interrupts" property to the correct named constant.
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This pull request brings in a board DT for the Raspberry Pi Compute
Module 3, its I/O board and enables the Ethernet LEDs for the RPi 3B+.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The Switch Register Access Block (SRAB) has one interrupt for link state
change on each ports (0-5, 7-8) a PHY interrupt, timestamping interrupt
and sleep timer interrupts for each management ports (5,7,8). Wire those
up so we can utilize them to speed up link resolution.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Enable the SFP connected to port 5 of the switch and wire up all GPIOs
to the SFP cage. Because of a hardware limitation of the i2c controller
on the iProc SoCs which prevents large i2c (> 63 bytes) transactions to
work, we use the i2c-gpio interface instead, which does not have that
limitation. This allows us to read the SFP module EEPROM, which would
not be possible otherwise since it exceeds that size during a single
read transfer.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
The maximum CPU frequency for the i.MX53 QSB is 1GHz, so disable the
1.2GHz OPP. This makes the board work again with configs that have
cpufreq enabled like imx_v6_v7_defconfig on which the board stopped
working with the addition of cpufreq-dt support.
Fixes: 791f416608 ("ARM: dts: imx53: add cpufreq-dt support")
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This board, as well as some other boards with i.MX6 and a PMIC, uses a
"PMIC_STBY_REQ" line to notify the PMIC about a state change.
The PMIC is programmed for a specific state change before triggering the
line.
In this case, PMIC_STBY_REQ can be used for stand by, sleep
and power off modes.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
