As the v4l2-fwnode framework now allows specifying defaults configurations,
expand the description of the optional endpoint properties for the CEU
interface to better explain which are their defaults values.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Allow specifying the bus type explicitly for MIPI D-PHY, parallel and
Bt.656 busses. This is useful for devices that can make use of different
bus types. There are CSI-2 transmitters and receivers but the PHY
selection needs to be made between C-PHY and D-PHY; many devices also
support parallel and Bt.656 interfaces but the means to pass that
information to software wasn't there.
Autodetection (value 0) is removed as an option as the property could be
simply omitted in that case.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Nodes for the newly support rk3188 display controller, a fix for a new
dtc warning, gpio setting for the sdmmc regulator on radxarock and a
new board the "S" variant of the rk3288-based Tinker board, that sports
an added emmc.
* tag 'v4.20-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: add rk3288-based Tinker board S
ARM: dts: rockchip: move shared tinker-board nodes to a common dtsi
ARM: dts: rockchip: explicitly set vcc_sd0 pin to gpio on rk3188-radxarock
ARM: dts: rockchip: Fix erroneous SPI bus dtc warnings on rk3036
ARM: dts: rockchip: add rk3188 lcd controller nodes
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Some additional new boards, the rk3399-based RockPro64 from Pine64, as well
as the Vamrs Rock960. Another big feature is display support including hdmi
and the Innosilicon hdmiphy on the rk3328, right now enabled on the rock64.
The rock64 also got its spi-nor and spdif enabled. On the px30 we can see
dwc2-based usb support now and finally some misc fixes, like for a new dtc
warning, missing address and size cells and microSD fix on sapphire.
* tag 'v4.20-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: enable display nodes on rk3328-rock64
arm64: dts: rockchip: add rk3328 display nodes
arm64: dts: rockchip: add Innosilicon hdmi phy node to rk3328
arm64: dts: rockchip: add missing address and size cells for rk3399 mipi dsi
arm64: dts: rockchip: Enable SPI NOR flash on Rock64
arm64: dts: rockchip: add initial dts support for Rockpro64
arm64: dts: rockchip: enable dwc2-based otg controller on px30-evb
arm64: dts: rockchip: add dwc2 otg controller on px30
dt-bindings: usb: dwc2: add description for px30
arm64: dts: rockchip: Enable SD card detection for Rock960 boards
arm64: dts: rockchip: Add support for Rock960 board
dt-bindings: arm: rockchip: Add binding for Rock960 board
arm64: dts: rockchip: Split out common nodes for Rock960 based boards
arm64: dts: rockchip: add spdif sound node for rock64
arm64: dts: rockchip: Fix microSD in rk3399 sapphire board
arm64: dts: rockchip: Fix I2C bus unit-address error on rk3399-puma-haikou
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The driver already has support for setting the FDRB bit in the CONFA
register through platform data, but there was no property to set it
in the device-tree bindings.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add internal PCI bridge support for r8a7744 SoC. The Renesas RZ/G1N
(R8A7744) internal PCI bridge is identical to the R-Car Gen2 family.
This doesn't change the driver, so it does nothing by itself. But it does
mean that checkpatch won't complain about a future patch that adds
"renesas,pci-r8a7744" to a DT, which helps ensure that shipped DTs use
documented compatibility strings.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Minor conflict in net/core/rtnetlink.c, David Ahern's bug fix in 'net'
overlapped the renaming of a netlink attribute in net-next.
Signed-off-by: David S. Miller <davem@davemloft.net>
Add out-bridge support
- This patch series enables out-bridge for LVDS bridge device support,
and also includes two cleanups and one relevant dt binding update
for this.
Add Samsung 16x16 tiled format support
- This patch series adds Samsung 16x16 tiled format to scaler and
gsc drivers. As for this, it adds Samsung specific format to
drm_forcc.h header. For the git-pull request with relevant patches,
I requested ack-by[1] to relevant maintainers but there was no any response.
I'm pretty sure no problem to go to mainline though Exynos tree
because the only user of it is Exynos.
(airlied: this looked fine to me)
[1] https://patchwork.freedesktop.org/patch/243921/
Add configurable plane alpha and pixel blend mode support
- This patch series makes mixer driver to be configuragle for
pixel blend mode and plane alpha, which also includes one fixup
to set all default values correctly after reset.
One cleanup
- This patch replaces drm_atomic_helper_suspend/resume() with
drm_mode_config_helper_suspend/resume() to remove exynos specific
suspend_state.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1538380891-24040-1-git-send-email-inki.dae@samsung.com
Document support for the R-Car gen3 CMT types 0/1 bindings -- they seem
to be the same CMT types 0/1 as in the R-Car gen2 SoCs.
Also document R8A779{7|8}0 bindings as these are the R-Car gen3 SoCs for
which the initial support was done.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The FIFO size of the UART devices is 64 on almost all UniPhier SoCs
with the exception Pro4TV SoC (MN2WS0235), which used 128 FIFO size.
However, Pro4TV SoC was never upstreamed, and out of production.
So, this property has never been used in a useful way.
Let's remove old unused code.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Describe the System Error Interrupt (SEI) controller. It aggregates two
types of interrupts, wired and MSIs from respectively the AP and the
CPs, into a single SPI interrupt.
Suggested-by: Haim Boot <hayim@marvell.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Change the documentation to reflect the new bindings used for Marvell
ICU. This involves describing each interrupt group as a subnode of the
ICU node. Each of them having their own compatible.
The DT binding documentation still documents the legacy binding, where
there was a single node with no subnode.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The Renesas RZ/N1 device family PINCTRL node description.
Based on a patch originally written by Michel Pollet at Renesas.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
mvebu soc for 4.20 (part 1)
- use dt_fixup to provide fallback for enable-method for Armada XP
- document the marvell,prestera compatible string
- update Thomas Petazzoni email in MAINTAINERS file
* tag 'mvebu-soc-4.20-1' of git://git.infradead.org/linux-mvebu:
dt-bindings: marvell,prestera: Add common compatible string
MAINTAINERS: replace free-electrons.com by bootlin.com for Thomas Petazzoni
ARM: mvebu: use dt_fixup to provide fallback for enable-method
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
i.MX device tree update for 4.20:
- New board support: Engicam's i.Core MX6 CPU module v1.5; ConnectCore
6UL Single Board Computer (SBC) Pro; i.MX6 ULZ based EVK board.
- Add Add SFF interface support for vf610-zii board.
- Disable unneeded devices like VPU and internal watchdog for imx51-zii
boards.
- Add 'no-sdio' and 'no-sd' property for vf610-zii-cfu1 board.
- Improve i.MX6 SLL GPIO support by adding gpio-ranges property and
clocks information.
- Update iomux header for i.MX7 Solo and i.MX6 ULL.
- Enable GPIO buttons as wakeup source for imx7d-sdb and imx6sx-sdb.
- Add GPIO keys and egalax touch screen support for imx6qdl-sabreauto.
- Switch to use SPDX-License-Identifier for more boards - vf610-twr,
imx7s-warp, Engicam boards.
- Add device tree bindings of 'fsl,pmic-stby-poweroff' property and add
the support for i.MX6 RIoTboard.
- DTC has new checks for SPI buses which will be landed on 4.20.
A patch from Rob to fix those 100+ warnings on i.MX boards. (Thanks!)
- Switch i.MX7 device tree to use updated coresight binding for
hardware ports.
- Misc small or random update and cleanup.
* tag 'imx-dt-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (50 commits)
ARM: dts: imx: add i.mx6ulz and i.mx6ulz 14x14 evk support
dt-bindings: arm: add compatible for i.MX6ULZ 14x14 EVK board
ARM: dts: imx53-ppd: Remove 'num-chipselects' property
ARM: dts: vf610-twr: Switch to SPDX identifier
ARM: dts: vf: Switch to SPDX identifier
ARM: dts: imx6qdl-zii-rdu2: Disable the internal RTC
ARM: dts: imx51-zii-rdu1: Fix the rtc compatible string
ARM: dts: imx6ul: use nvmem-cells for cpu speed grading
ARM: dts: imx: Fix SPI bus warnings
ARM: dts: imx7: Update coresight binding for hardware ports
ARM: dts: vf610-zii-cfu1: Pass the 'no-sd' property
ARM: dts: vf610-zii-cfu1: Pass the 'no-sdio' property
ARM: dts: imx51-zii-scu2-mezz: Disable the internal watchdog
ARM: dts: imx51-zii-scu2-mezz: Disable VPU
ARM: dts: imx51-zii-scu3-esb: Disable VPU
ARM: dts: imx51: Add label for VPU node
ARM: dts: imx6ull: update vdd_soc voltage for 900MHz operating point
ARM: dts: imx6ul: Add DTS for ConnectCore 6UL SBC Pro
ARM: dts: imx6: RIoTboard provide standby on power off option
dt-bindings: imx6q-clock: add new fsl,pmic-stby-poweroff property
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Document support for the Interrupt Controller for External Devices
(INTC-EX) in the Renesas E3 (r8a77990) SoC.
No driver update is needed.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Allwinner H3 and H5 DT additions for 4.20
This is our usual H3/H5 pull request
The most notable changes are:
- the video decoding / encoding unit is finally enabled on the H3
- Mali support for the H5
- New boards: BananaPi M2+ v1.2, Orange Pi Zero Plus 2 H3 support
* tag 'sunxi-h3-h5-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sunxi: h3-h5: Add Bananapi M2+ v1.2 device trees
ARM: dts: sun8i-h3: Add Video Engine and reserved memory nodes
arm64: dts: allwinner: h5: Add device tree for Bananapi M2 Plus H5
ARM: dts: sun8i: h3: Split out non-SoC-specific parts of Bananapi M2 Plus
ARM: dts: sun8i: h3: bpi-m2-plus: Fix address for external RGMII Ethernet PHY
ARM: dts: sun8i: h3-h5: ir register size should be the whole memory block
arm64: dts: allwinner: h5: Add device node for Mali-450 GPU
ARM: dts: sun8i: Add initial Orangepi Zero Plus 2 H3 support
nvmem: sunxi-sid: add support for H5's SID controller
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm ARM Based Driver Updates for v4.20
* Refactor of SCM compatibles and clock requirements
* SMEM cleanup
* Add LLCC EDAC driver
* Fixes for GENI clocks and macros
* Fix includes for llcc-slice and smem
* String overflow fixes for APR and wcnss_ctrl
* Fixup for COMPILE_TEST of qcom driver Kconfigs
* Cleanup of Kconfig depends of rpmh, smd_rpm, smsm, and smp2p
* Add SCM dependencies to SPM and rmtfs-mem
* tag 'qcom-drivers-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: (38 commits)
soc: qcom: geni: geni_se_clk_freq_match() should always accept multiples
soc: qcom: geni: Don't ignore clk_round_rate() errors in geni_se_clk_tbl_get()
soc: qcom: geni: Make version macros simpler
dt-bindings: firmware: scm: Add MSM8998 and SDM845
firmware: qcom: scm: Refactor clock handling
dt-bindings: firmware: scm: Refactor compatibles and clocks
soc: qcom: smem: a few last cleanups
soc: qcom: smem: verify partition host ids match
soc: qcom: smem: small change in global entry loop
soc: qcom: smem: verify partition offset_free_uncached
soc: qcom: smem: verify partition header size
soc: qcom: smem: introduce qcom_smem_partition_header()
soc: qcom: smem: require order of host ids to match
soc: qcom: smem: verify both host ids in partition header
soc: qcom: smem: small refactor in qcom_smem_enumerate_partitions()
soc: qcom: smem: always ignore partitions with 0 offset or size
soc: qcom: smem: initialize region struct only when successful
soc: qcom: smem: rename variable in qcom_smem_get_global()
drivers: qcom: rpmh-rsc: clear wait_for_compl after use
soc: qcom: rmtfs-mem: Validate that scm is available
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Actions Semi SoC drivers for v4.20 #2
The SPS power domain driver is extended for S900 SoC.
This required merging a topic branch for the new bindings header.
* tag 'actions-drivers+s900-sps-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions:
soc: actions: sps: Add S900 power domains
dt-bindings: power: Add Actions Semi S900 SPS
soc: actions: Update SPS help text for S700
soc: actions: Convert to SPDX license identifiers
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
PMIC wrapper:
- sort SoCs and PMICs ascending
- add capabilities
- add support for mt8183 SoC + mt6358 PMIC
- return false instead of 0
- add support for mt6765 SoC + mt6357 PMIC
* tag 'v4.19-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
soc: mediatek: pwrap: add mt6357 driver for mt6765 SoCs
soc: mediatek: pwrap: add pwrap driver for mt6765 SoCs
dt-bindings: pwrap: mediatek: add pwrap support for MT6765
soc: mediatek: pwrap: use true and false for boolean values
soc: mediatek: add mt8183 pwrap support
soc: mediatek: pwrap: use group of bits for pwrap capability
soc: mediatek: pwrap: order SoCs and PMICs ascending
dt-bindings: mediatek: add compatible for mt8183 pwrap
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Allwinner drivers changes for 4.20
The H6 is now supported in our SRAM driver bindings, and we have a small
Makefile change for the SRAM driver to build it without building the
ARCH_SUNXI architecture, especially relevant for the COMPILE_TEST case.
* tag 'sunxi-drivers-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
dt-bindings: sunxi-sram: add binding for Allwinner H6 SRAM C
drivers: soc: Allow building the sunxi driver without ARCH_SUNXI
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
R-Car Gen3 needs to enable clocks of both host and peripheral.
Otherwise, other side device cannot work correctly. So, this patch
adds a property of clock-names for R-Car Gen3 as an optional.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
DWC3 variant found in Exynos5433 SoCs requires keeping all DRD30/UHOST30
clocks enabled all the time the driver does any access to DWC3 registers,
otherwise external abort happens. So far DWC3 hardware module worked with
samsung,exynos5250-dwusb3 compatible only by luck when built into kernel:
all DRD30 clocks were left enabled by bootloader and later kept enabled
by the DRD PHY driver. However, if one tried to use Exnos DWC3 driver as
a module or performed system suspend/resume cycle, external abort
happened. This patch finally fixes this issue.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Jonathan writes:
Second set of IIO new device support features and cleanup for the 4.20 cycle.
One merge commit in here to bring in the SPI_CS_WORD flag patches
that are also going via the SPI tree.
There are a few more fixes than normal for a pull targetting the
next merge window. These are all long term issues and as we are late
in the cycle, they can wait.
New device support
* ad7606
- Add support fo the ad7605-4 driver. This driver is still in staging
but is heading in the right direction to graduate, motivated partly
by the requirement for this device support.
* ST VL53L0X ToF ranging sensor
- New minimal driver. Interrupt support to follow.
New features
* SPI_CS_WORD optimization allows long transfers with the chip select
toggled every 16bits. There is a software fallback as well to let
drivers not care about whether the hardware supports it.
* bh1750
- Device tree support and bindings.
* ti-ads7950
- Use the SPI_CS_WORD optmization to save lots of cpu cycles (assuming
the hardware supports it)
Fixes and cleanups
* ad5064
- Fix some long incorrect regulator error handling that preventing
enabling the internal regulator.
* ad7606
- The ad7606 doesn't actually have a 2.5V range and the values provided
for scale have always been wrong. Fix them.
- Drop some wrong kernel-doc (things that don't exist)
- Add missing kernel-doc
* at91-adc
- Fixing missing ack of dataready on sysfs channel reads to avoid spurious
interrupts.
- Fix a wrong channel numbers in triggered_buffer_mode
* hmc5843
- Fix incorrect part number in a comment.
* imx25-gcq
- Fix a device_node leak in an error path.
* meson-saradc
- Drop an unused and pointless define.
- Use of_device_get_match_data instead of opencoding
- Tidy up how meson_sar_adc_param is accessed.
- Rework prior to adding some temperature sensor support.
* tag 'iio-for-4.20b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: ad5064: Fix regulator handling
iio: adc: meson-saradc: use the address attribute from iio_chan_spec
iio: adc: meson-saradc: do not use meson_sar_adc_iio_channels directly
iio: adc: at91: fix wrong channel number in triggered buffer mode
iio: adc: at91: fix acking DRDY irq on simple conversions
iio: adc: meson-saradc: simplify access to meson_sar_adc_param
iio: adc: meson-saradc: use of_device_get_match_data
iio: adc: meson-saradc: remove #define MESON_SAR_ADC_DELTA_10_TS_C_SHIFT
iio: light: bh1750: Add device tree support
dt-bindings: iio: light: bh1750: Add device tree binding documentation
staging:iio:ad7606: Add support for the ad7605-4
iio: proximity: Add driver support for ST's VL53L0X ToF ranging sensor.
staging:iio:ad7606: update structs with doc annotations
iio: magnetometer: hmc5843: Fixed a comment error.
iio: adc: imx25-gcq: Fix leak of device_node in mx25_gcq_setup_cfgs()
iio: adc: ti-ads7950: use SPI_CS_WORD to reduce CPU usage
spi: add software implementation for SPI_CS_WORD
spi: add new SPI_CS_WORD flag
staging:iio:ad7606: Remove incorrect kernel doc annotations
staging:iio:ad7606: fix voltage scales
Kishon writes:
phy: for 4.20
*) Add new PHY driver for Socionext PCIe, USB2 and USB3 PHY
*) Add new PHY driver for Rockchip HDMI PHY
*) Add new PHY driver for Cadence display port PHY
*) Add support for UFS PHY in Qualcomm's SDM845 SoC
*) Add correct PHY init sequence for BCM63138 SATA PHY
*) Add support for bringing the uart2 out through the usb dm+dp pin in
Rockchips's rk3188
*) Re-design R-Car Gen3 USB PHY w.r.t support for OTG
*) Cleanup Qualcomm's UFS PHY, QMP PHY (for PCIe and USB3) and QUSB2 PHY
*) A preparation patch to remove the node name pointer from struct device_node
*) Minor cleanups in some of the other PHY drivers.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* tag 'phy-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy: (41 commits)
phy: renesas: convert to SPDX identifiers
phy: lantiq: Fix compile warning
phy: qcom-ufs: Declare 20nm qcom ufs qmp phy as Broken
scsi/ufs: qcom: Remove ufs_qcom_phy_*() calls from host
phy: qcom-ufs: Remove stale methods that handle ref clk
dt-bindings: phy-qcom-qmp: Add UFS phy compatible string for sdm845
phy: Add QMP phy based UFS phy support for sdm845
phy: General struct and field cleanup
phy: Update PHY power control sequence
phy: rockchip-usb: add usb-uart setup for rk3188
phy: phy-twl4030-usb: fix denied runtime access
phy: renesas: rcar-gen3-usb2: add is_otg_channel to use "role" sysfs
phy: renesas: rcar-gen3-usb2: add conditions for uses_otg_pins == false
phy: renesas: rcar-gen3-usb2: change a condition "dr_mode"
phy: renesas: rcar-gen3-usb2: unify OBINTEN handling
phy: renesas: rcar-gen3-usb2: Check a property to use otg pins
phy: renesas: rcar-gen3-usb2: Rename has_otg_pins to uses_otg_pins
phy: renesas: rcar-gen3-usb2: fix vbus_ctrl for role sysfs
dt-bindings: rcar-gen3-phy-usb2: add no-otg-pins property
phy: brcm-sata: Add BCM63138 (DSL) PHY init sequence
...
Document the compatible string "brcm,bcm63138-ahci" as a valid
compatible string for the standard Broadcom AHCI controller.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
pinctrl: sh-pfc: Updates for v4.20 (take two)
- Add MSIOF pin groups on R-Car E3 and D3,
- Add support for the new RZ/G1N (R8A7744) and RZ/G2E (R8A774C0) SoCs,
- Add I2C4, DU0, QSPI0, SDHI2, and USB pin groups on RZ/G1C,
- Convert to SPDX license identifiers,
- Small cleanups.
This is the 4.19-rc6 release
I needed to merge this in because of extensive conflicts in
the MSM and Intel pin control drivers. I know how to resolve
them, so let's do it like this.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Although the I2C IP found in the RZ/G1C is not exactly the same
as the one found in the R-Car Gen2 family or R-Car Gen3 family,
it can still be considered as compatible with R-Car Gen2 from
a software perpective.
This patch therefore documents the SoC specific compatible string,
and the compatibility with Gen2 fallback is retained.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
