This patch adds support for the 8 channel PDM-to-I2S/TDM converter. The
ADAU7118 converts four stereo pulse density modulation (PDM) bitstreams
into one pulse code modulation (PCM) output stream. The source for the PDM
data can be eight microphones or other PDM sources. The PCM audio data is
output on a serial audio interface port in either inter-IC serial (I2S) or
time domain multiplexed (TDM) format.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20191010074234.7344-1-nuno.sa@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds missing MIX2 path on RX1/2 which take IIR1 and
IIR2 as inputs.
Without this patch sound card fails to intialize with below warning:
ASoC: no sink widget found for RX1 MIX2 INP1
ASoC: Failed to add route IIR1 -> IIR1 -> RX1 MIX2 INP1
ASoC: no sink widget found for RX2 MIX2 INP1
ASoC: Failed to add route IIR1 -> IIR1 -> RX2 MIX2 INP1
ASoC: no sink widget found for RX1 MIX2 INP1
ASoC: Failed to add route IIR2 -> IIR2 -> RX1 MIX2 INP1
ASoC: no sink widget found for RX2 MIX2 INP1
ASoC: Failed to add route IIR2 -> IIR2 -> RX2 MIX2 INP1
Reported-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20191009111944.28069-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The snd_pcm_hw_constraint_minmax() works fine when a single codec is
connected to a single CPU DAI, but in multicodec or DPCM setup the
constraints placed by the driver will apply to the whole PCM stream (FE
included) and thus prevents more than 8 playback channels for example.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20191008115720.7135-1-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
According the documentation for snd_soc_update_bits the API
will return a 1 if the update was successful with a value change,
a 0 if the update was successful with no value change or a negative
if the command just failed.
So the value of return in the driver needs to be checked for being less
then 0 or the caller may indicate failure when the value actually
changed.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20191007171157.17813-1-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If GPIOLIB is not set, building fails:
sound/soc/codecs/tas2770.c: In function tas2770_reset:
sound/soc/codecs/tas2770.c:38:3: error: implicit declaration of function gpiod_set_value_cansleep; did you mean gpio_set_value_cansleep? [-Werror=implicit-function-declaration]
gpiod_set_value_cansleep(tas2770->reset_gpio, 0);
^~~~~~~~~~~~~~~~~~~~~~~~
gpio_set_value_cansleep
sound/soc/codecs/tas2770.c: In function tas2770_i2c_probe:
sound/soc/codecs/tas2770.c:749:24: error: implicit declaration of function devm_gpiod_get_optional; did you mean devm_regulator_get_optional? [-Werror=implicit-function-declaration]
tas2770->reset_gpio = devm_gpiod_get_optional(tas2770->dev,
^~~~~~~~~~~~~~~~~~~~~~~
devm_regulator_get_optional
sound/soc/codecs/tas2770.c:751:13: error: GPIOD_OUT_HIGH undeclared (first use in this function); did you mean GPIOF_INIT_HIGH?
GPIOD_OUT_HIGH);
^~~~~~~~~~~~~~
GPIOF_INIT_HIGH
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 1a476abc72 ("tas2770: add tas2770 smart PA kernel driver")
Suggested-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20191006104631.60608-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The PGA Slew Time control allows to configure the rate with which the PGA
gain control ramps up/down to the target setting.
The PGA slew control is done via the ALC Control 0 register. There are 2
bits on that reg, that control PGA slew time, while the other bits control
parts of the ALC (automatic level control) block.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20190926115012.24049-1-alexandru.ardelean@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull sound fixes from Takashi Iwai:
"A few small remaining wrap-up for this merge window.
Most of patches are device-specific (HD-audio and USB-audio quirks,
FireWire, pcm316a, fsl, rsnd, Atmel, and TI fixes), while there is a
simple fix (actually two commits) for ASoC core"
* tag 'sound-fix-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: usb-audio: Add DSD support for EVGA NU Audio
ALSA: hda - Add laptop imic fixup for ASUS M9V laptop
ASoC: ti: fix SND_SOC_DM365_VOICE_CODEC dependencies
ASoC: pcm3168a: The codec does not support S32_LE
ASoC: core: use list_del_init and move it back to soc_cleanup_component
ALSA: hda/realtek - PCI quirk for Medion E4254
ALSA: hda - Apply AMD controller workaround for Raven platform
ASoC: rsnd: do error check after rsnd_channel_normalization()
ASoC: atmel_ssc_dai: Remove wrong spinlock usage
ASoC: core: delete component->card_list in soc_remove_component only
ASoC: fsl_sai: Fix noise when using EDMA
ALSA: usb-audio: Add Hiby device family to quirks for native DSD support
ALSA: hda/realtek - Fix alienware headset mic
ALSA: dice: fix wrong packet parameter for Alesis iO26
In case of WM1811 device there are currently being registered controls
referring to registers not existing on that device.
It has been noticed when getting values of "AIF1ADC2 Volume", "AIF1DAC2
Volume" controls was failing during ALSA state restoring at boot time:
"amixer: Mixer hw:0 load error: Device or resource busy"
Reading some registers through I2C was failing with EBUSY error and
indeed these registers were not available according to the datasheet.
To fix this controls not available on WM1811 are moved to a separate
array and registered only for WM8994 and WM8958.
There are some further differences between WM8994 and WM1811,
e.g. registers 603h, 604h, 605h, which are not covered in this patch.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Link: https://lore.kernel.org/r/20190920130218.32690-2-s.nawrocki@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull chrome platform updates from Benson Leung:
"CrOS EC / MFD Migration:
- Move cros_ec core driver from mfd into chrome platform.
Wilco EC:
- Add batt_ppid_info command to Wilco telemetry driver.
CrOS EC:
- cros_ec_rpmsg : Add support to inform EC of suspend/resume status
- cros_ec_rpmsg : Fix race condition on probe failed
- cros_ec_chardev : Add a poll handler to receive MKBP events
Misc:
- bugfixes in cros_usbpd_logger and cros_ec_ishtp"
* tag 'tag-chrome-platform-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_usbpd_logger: null check create_singlethread_workqueue
platform/chrome: cros_ec_chardev: Add a poll handler to receive MKBP events
platform/chrome: cros_ec_rpmsg: Fix race with host command when probe failed
platform/chrome: chromeos_tbmc: Report wake events
mfd: cros_ec: Use mfd_add_hotplug_devices() helper
mfd: cros_ec: Add convenience struct to define autodetectable CrOS EC subdevices
mfd: cros_ec: Add convenience struct to define dedicated CrOS EC MCUs
mfd: cros_ec: Use kzalloc and cros_ec_cmd_xfer_status helper
mfd / platform: cros_ec: Reorganize platform and mfd includes
mfd / platform: cros_ec: Rename config to a better name
mfd: cros_ec: Switch to use the new cros-ec-chardev driver
mfd / platform: cros_ec: Miscellaneous character device to talk with the EC
mfd / platform: cros_ec: Move cros-ec core driver out from MFD
mfd / platform: cros_ec: Handle chained ECs as platform devices
platform/chrome: cros_ec_rpmsg: Add host command AP sleep state support
platform/chrome: chromeos_laptop: drop checks of NULL-safe functions
platform/chrome: wilco_ec: Add batt_ppid_info command to telemetry driver
Instead of clearing RT5677_PWR_ANLG2 (MX-64h) to 0 at SND_SOC_BIAS_OFF,
we only clear the RT5677_PWR_CORE bit which is set at SND_SOC_BIAS_PREPARE.
MICBIAS control bits are left unchanged.
This fixed the bug where if MICBIAS1 widget is forced on, MICBIAS
control bits will be cleared at suspend and never turned back on again,
since DAPM thinks the widget is always on.
Signed-off-by: Ben Zhang <benzh@chromium.org>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20190906194636.217881-3-cujomalainey@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Don't populate the array pd on the stack but instead make it
static const. Makes the object code smaller by 82 bytes.
Before:
text data bss dec hex filename
26548 7288 64 33900 846c sound/soc/codecs/rt1308.o
After:
text data bss dec hex filename
26370 7384 64 33818 841a sound/soc/codecs/rt1308.o
(gcc version 9.2.1, amd64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20190907074634.22144-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Don't populate the array pd on the stack but instead make it
static const. Makes the object code smaller by 93 bytes.
Before:
text data bss dec hex filename
38961 9784 64 48809 bea9 sound/soc/codecs/rt1305.o
After:
text data bss dec hex filename
38804 9848 64 48716 be4c sound/soc/codecs/rt1305.o
(gcc version 9.2.1, amd64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20190907074156.21907-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Don't populate the array pd on the stack but instead make it
static const. Makes the object code smaller by 100 bytes.
Before:
text data bss dec hex filename
51463 13016 128 64607 fc5f sound/soc/codecs/rt1011.o
After:
text data bss dec hex filename
51299 13080 128 64507 fbfb sound/soc/codecs/rt1011.o
(gcc version 9.2.1, amd64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20190907073717.21632-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Don't populate the arrays on the stack but instead make them
static const. Makes the object code smaller by 37 bytes.
Before:
text data bss dec hex filename
16253 7200 0 23453 5b9d sound/soc/codecs/ad193x.o
After:
text data bss dec hex filename
16056 7360 0 23416 5b78 sound/soc/codecs/ad193x.o
(gcc version 9.2.1, amd64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20190906161404.1440-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch supports some type of machine drivers that set 0 to mclk
when sound device goes to idle state. After applied this patch,
sysclk == 0 means there is no constraint of sound rate and other
values will set constraints which is derived by sysclk setting.
Original code refuses sysclk == 0 setting. But some boards and SoC
(such as RockPro64 and RockChip I2S) has connected SoC MCLK out to
ES8316 MCLK in. In this case, SoC side I2S will choose suitable
frequency of MCLK such as fs * mclk-fs when user starts playing or
capturing.
Bad scenario as follows (mclk-fs = 256):
- Initialize sysclk by correct value (Ex. 12.288MHz)
- ES8316 set constraints of PCM rate by sysclk
48kHz (1/256), 32kHz (1/384), 30.720kHz (1/400),
24kHz (1/512), 16kHz (1/768), 12kHz (1/1024)
- Play 48kHz sound, it's acceptable
- Sysclk is not changed
- Play 32kHz sound, it's acceptable
- Set sysclk by 8.192MHz (= fs * mclk-fs = 32k * 256)
- ES8316 set constraints of PCM rate by sysclk
32kHz (1/256), 21.33kHz (1/384), 20.48kHz (1/400),
16kHz (1/512), 10.66kHz (1/768), 8kHz (1/1024)
- Play 48kHz again, but it's NOT acceptable because constraints
list does not allow 48kHz
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Link: https://lore.kernel.org/r/20190907163653.9382-2-katsuhiro@katsuster.net
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a bit of mess between cros-ec mfd includes and platform
includes. For example, we have a linux/mfd/cros_ec.h include that
exports the interface implemented in platform/chrome/cros_ec_proto.c. Or
we have a linux/mfd/cros_ec_commands.h file that is non related to the
multifunction device (in the sense that is not exporting any function of
the mfd device). This causes crossed includes between mfd and
platform/chrome subsystems and makes the code difficult to read, apart
from creating 'curious' situations where a platform/chrome driver includes
a linux/mfd/cros_ec.h file just to get the exported functions that are
implemented in another platform/chrome driver.
In order to have a better separation on what the cros-ec multifunction
driver does and what the cros-ec core provides move and rework the
affected includes doing:
- Move cros_ec_commands.h to include/linux/platform_data/cros_ec_commands.h
- Get rid of the parts that are implemented in the platform/chrome/cros_ec_proto.c
driver from include/linux/mfd/cros_ec.h to a new file
include/linux/platform_data/cros_ec_proto.h
- Update all the drivers with the new includes, so
- Drivers that only need to know about the protocol include
- linux/platform_data/cros_ec_proto.h
- linux/platform_data/cros_ec_commands.h
- Drivers that need to know about the cros-ec mfd device also include
- linux/mfd/cros_ec.h
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Tested-by: Gwendal Grignou <gwendal@chromium.org>
Series changes: 3
- Fix dereferencing pointer to incomplete type 'struct cros_ec_dev' (lkp)
Signed-off-by: Lee Jones <lee.jones@linaro.org>
