Two minor conflicts:
1) net/ipv4/route.c, adding a new local variable while
moving another local variable and removing it's
initial assignment.
2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes.
One pretty prints the port mode differently, whilst another
changes the driver to try and obtain the port mode from
the port node rather than the switch node.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from Jakub Kicinski:
- fix failure to add bond interfaces to a bridge, the offload-handling
code was too defensive there and recent refactoring unearthed that.
Users complained (Ido)
- fix unnecessarily reflecting ECN bits within TOS values / QoS marking
in TCP ACK and reset packets (Wei)
- fix a deadlock with bpf iterator. Hopefully we're in the clear on
this front now... (Yonghong)
- BPF fix for clobbering r2 in bpf_gen_ld_abs (Daniel)
- fix AQL on mt76 devices with FW rate control and add a couple of AQL
issues in mac80211 code (Felix)
- fix authentication issue with mwifiex (Maximilian)
- WiFi connectivity fix: revert IGTK support in ti/wlcore (Mauro)
- fix exception handling for multipath routes via same device (David
Ahern)
- revert back to a BH spin lock flavor for nsid_lock: there are paths
which do require the BH context protection (Taehee)
- fix interrupt / queue / NAPI handling in the lantiq driver (Hauke)
- fix ife module load deadlock (Cong)
- make an adjustment to netlink reply message type for code added in
this release (the sole change touching uAPI here) (Michal)
- a number of fixes for small NXP and Microchip switches (Vladimir)
[ Pull request acked by David: "you can expect more of this in the
future as I try to delegate more things to Jakub" ]
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (167 commits)
net: mscc: ocelot: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries
net: dsa: seville: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries
net: dsa: felix: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries
inet_diag: validate INET_DIAG_REQ_PROTOCOL attribute
net: bridge: br_vlan_get_pvid_rcu() should dereference the VLAN group under RCU
net: Update MAINTAINERS for MediaTek switch driver
net/mlx5e: mlx5e_fec_in_caps() returns a boolean
net/mlx5e: kTLS, Avoid kzalloc(GFP_KERNEL) under spinlock
net/mlx5e: kTLS, Fix leak on resync error flow
net/mlx5e: kTLS, Add missing dma_unmap in RX resync
net/mlx5e: kTLS, Fix napi sync and possible use-after-free
net/mlx5e: TLS, Do not expose FPGA TLS counter if not supported
net/mlx5e: Fix using wrong stats_grps in mlx5e_update_ndo_stats()
net/mlx5e: Fix multicast counter not up-to-date in "ip -s"
net/mlx5e: Fix endianness when calculating pedit mask first bit
net/mlx5e: Enable adding peer miss rules only if merged eswitch is supported
net/mlx5e: CT: Fix freeing ct_label mapping
net/mlx5e: Fix memory leak of tunnel info when rule under multipath not ready
net/mlx5e: Use synchronize_rcu to sync with NAPI
net/mlx5e: Use RCU to protect rq->xdp_prog
...
Pull tracing fixes from Steven Rostedt:
- Check kprobe is enabled before unregistering from ftrace as it isn't
registered when disabled.
- Remove kprobes enabled via command-line that is on init text when
freed.
- Add missing RCU synchronization for ftrace trampoline symbols removed
from kallsyms.
- Free trampoline on error path if ftrace_startup() fails.
- Give more space for the longer PID numbers in trace output.
- Fix a possible double free in the histogram code.
- A couple of fixes that were discovered by sparse.
* tag 'trace-v5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
bootconfig: init: make xbc_namebuf static
kprobes: tracing/kprobes: Fix to kill kprobes on initmem after boot
tracing: fix double free
ftrace: Let ftrace_enable_sysctl take a kernel pointer buffer
tracing: Make the space reserved for the pid wider
ftrace: Fix missing synchronize_rcu() removing trampoline from kallsyms
ftrace: Free the trampoline when ftrace_startup() fails
kprobes: Fix to check probe enabled before disarm_kprobe_ftrace()
Dictionaries are only used for SUBSYSTEM and DEVICE properties. The
current implementation stores the property names each time they are
used. This requires more space than otherwise necessary. Also,
because the dictionary entries are currently considered optional,
it cannot be relied upon that they are always available, even if the
writer wanted to store them. These issues will increase should new
dictionary properties be introduced.
Rather than storing the subsystem and device properties in the
dict ring, introduce a struct dev_printk_info with separate fields
to store only the property values. Embed this struct within the
struct printk_info to provide guaranteed availability.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/87mu1jl6ne.fsf@jogness.linutronix.de
The majority of the size of a descriptor is taken up by meta data,
which is often not of interest to the ringbuffer (for example,
when performing state checks). Since descriptors are often
temporarily stored on the stack, keeping their size minimal will
help reduce stack pressure.
Rather than embedding the printk_info into the descriptor, create
a separate printk_info array. The index of a descriptor in the
descriptor array corresponds to the printk_info with the same
index in the printk_info array. The rules for validity of a
printk_info match the existing rules for the data blocks: the
descriptor must be in a consistent state.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200918223421.21621-2-john.ogness@linutronix.de
It seems that alloc_retstack_tasklist() can also take a lockless
approach for scanning the tasklist, instead of using the big global
tasklist_lock. For this we also kill another deprecated and rcu-unsafe
tsk->thread_group user replacing it with for_each_process_thread(),
maintaining semantics.
Here tasklist_lock does not protect anything other than the list
against concurrent fork/exit. And considering that the whole thing
is capped by FTRACE_RETSTACK_ALLOC_SIZE (32), it should not be a
problem to have a pontentially stale, yet stable, list. The task cannot
go away either, so we don't risk racing with ftrace_graph_exit_task()
which clears the retstack.
The tsk->ret_stack management is not protected by tasklist_lock, being
serialized with the corresponding publish/subscribe barriers against
concurrent ftrace_push_return_trace(). In addition this plays nicer
with cachelines by avoiding two atomic ops in the uncontended case.
Link: https://lkml.kernel.org/r/20200907013326.9870-1-dave@stgolabs.net
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The "tr" is a stack variable so setting it to NULL before a return is
a no-op. Delete the assignment.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Some kernels builds might inline vfs_getattr call within fstat
syscall code path, so fentry/vfs_getattr trampoline is not called.
Add security_inode_getattr to allowlist and switch the d_path test stat
trampoline to security_inode_getattr.
Keeping dentry_open and filp_close, because they are in their own
files, so unlikely to be inlined, but in case they are, adding
security_file_open.
Adding flags that indicate trampolines were called and failing
the test if any of them got missed, so it's easier to identify
the issue next time.
Fixes: e4d1af4b16 ("selftests/bpf: Add test for d_path helper")
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200918112338.2618444-1-jolsa@kernel.org
The mapping between bpf_arg_type and bpf_reg_type is encoded in a big
hairy if statement that is hard to follow. The debug output also leaves
to be desired: if a reg_type doesn't match we only print one of the
options, instead printing all the valid ones.
Convert the if statement into a table which is then used to drive type
checking. If none of the reg_types match we print all options, e.g.:
R2 type=rdonly_buf expected=fp, pkt, pkt_meta, map_value
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200921121227.255763-12-lmb@cloudflare.com
check_func_arg has a plethora of weird if statements with empty branches.
They work around the fact that *_OR_NULL argument types should accept a
SCALAR_VALUE register, as long as it's value is 0. These statements make
it difficult to reason about the type checking logic.
Instead, skip more detailed type checking logic iff the register is 0,
and the function expects a nullable type. This allows simplifying the type
checking itself.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200921121227.255763-11-lmb@cloudflare.com
If we encounter a pointer to memory, we set meta->raw_mode depending
on the type of memory we point at. What isn't obvious is that this
information is only used when the next memory size argument is
encountered.
Move the assignment closer to where it's used, and add a comment that
explains what is going on.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200921121227.255763-9-lmb@cloudflare.com
Perform BTF type checks if the register we're working on contains a BTF
pointer, rather than if the argument is for a BTF pointer. This is easier
to understand, and allows removing the code from the arg_type checking
section of the function.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200921121227.255763-6-lmb@cloudflare.com
Function prototypes using ARG_PTR_TO_BTF_ID currently use two ways to signal
which BTF IDs are acceptable. First, bpf_func_proto.btf_id is an array of
IDs, one for each argument. This array is only accessed up to the highest
numbered argument that uses ARG_PTR_TO_BTF_ID and may therefore be less than
five arguments long. It usually points at a BTF_ID_LIST. Second, check_btf_id
is a function pointer that is called by the verifier if present. It gets the
actual BTF ID of the register, and the argument number we're currently checking.
It turns out that the only user check_arg_btf_id ignores the argument, and is
simply used to check whether the BTF ID has a struct sock_common at it's start.
Replace both of these mechanisms with an explicit BTF ID for each argument
in a function proto. Thanks to btf_struct_ids_match this is very flexible:
check_arg_btf_id can be replaced by requiring struct sock_common.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200921121227.255763-5-lmb@cloudflare.com
Pull RCU fix from Paul McKenney:
"This contains a single commit that fixes a bug that was introduced in
the last merge window. This bug causes a compiler warning complaining
about show_rcu_tasks_classic_gp_kthread() being an unused static
function in !SMP kernels.
The fix is straightforward, just adding an 'inline' to make this a
static inline function, thus avoiding the warning.
This bug was reported by Laurent Pinchart, who would like it fixed
sooner rather than later"
* 'rcu/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
rcu-tasks: Prevent complaints of unused show_rcu_tasks_classic_gp_kthread()
Fix this link error:
ERROR: modpost: "rcu_idle_enter" [drivers/acpi/processor.ko] undefined!
ERROR: modpost: "rcu_idle_exit" [drivers/acpi/processor.ko] undefined!
when CONFIG_ACPI_PROCESSOR is built as module. PeterZ says that in light
of ARM needing those soon too, they should simply be exported.
Fixes: 1fecfdbb7a ("ACPI: processor: Take over RCU-idle for C3-BM idle")
Reported-by: Sven Joachim <svenjoac@gmx.de>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Paul E. McKenney <paulmckrcu@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull syscall tracing fix from Borislav Petkov:
"Fix the seccomp syscall rewriting so that trace and audit see the
rewritten syscall number, from Kees Cook"
* tag 'core_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
core/entry: Report syscall correctly for trace and audit
Pull locking fixes from Borislav Petkov:
"Two fixes from the locking/urgent pile:
- Fix lockdep's detection of "USED" <- "IN-NMI" inversions (Peter
Zijlstra)
- Make percpu-rwsem operations on the semaphore's ->read_count
IRQ-safe because it can be used in an IRQ context (Hou Tao)"
* tag 'locking_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/percpu-rwsem: Use this_cpu_{inc,dec}() for read_count
locking/lockdep: Fix "USED" <- "IN-NMI" inversions
Merge fixes from Andrew Morton:
"15 patches.
Subsystems affected by this patch series: mailmap, mm/hotfixes,
mm/thp, mm/memory-hotplug, misc, kcsan"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
kcsan: kconfig: move to menu 'Generic Kernel Debugging Instruments'
fs/fs-writeback.c: adjust dirtytime_interval_handler definition to match prototype
stackleak: let stack_erasing_sysctl take a kernel pointer buffer
ftrace: let ftrace_enable_sysctl take a kernel pointer buffer
mm/memory_hotplug: drain per-cpu pages again during memory offline
selftests/vm: fix display of page size in map_hugetlb
mm/thp: fix __split_huge_pmd_locked() for migration PMD
kprobes: fix kill kprobe which has been marked as gone
tmpfs: restore functionality of nr_inodes=0
mlock: fix unevictable_pgs event counts on THP
mm: fix check_move_unevictable_pages() on THP
mm: migration of hugetlbfs page skip memcg
ksm: reinstate memcg charge on copied pages
mailmap: add older email addresses for Kees Cook
Commit 32927393dc ("sysctl: pass kernel pointers to ->proc_handler")
changed ctl_table.proc_handler to take a kernel pointer. Adjust the
signature of stack_erasing_sysctl to match ctl_table.proc_handler which
fixes the following sparse warning:
kernel/stackleak.c:31:50: warning: incorrect type in argument 3 (different address spaces)
kernel/stackleak.c:31:50: expected void *
kernel/stackleak.c:31:50: got void [noderef] __user *buffer
Fixes: 32927393dc ("sysctl: pass kernel pointers to ->proc_handler")
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lkml.kernel.org/r/20200907093253.13656-1-tklauser@distanz.ch
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 32927393dc ("sysctl: pass kernel pointers to ->proc_handler")
changed ctl_table.proc_handler to take a kernel pointer. Adjust the
signature of ftrace_enable_sysctl to match ctl_table.proc_handler which
fixes the following sparse warning:
kernel/trace/ftrace.c:7544:43: warning: incorrect type in argument 3 (different address spaces)
kernel/trace/ftrace.c:7544:43: expected void *
kernel/trace/ftrace.c:7544:43: got void [noderef] __user *buffer
Fixes: 32927393dc ("sysctl: pass kernel pointers to ->proc_handler")
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lkml.kernel.org/r/20200907093207.13540-1-tklauser@distanz.ch
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull s390 fixes from Vasily Gorbik:
- Fix order in trace_hardirqs_off_caller() to make locking state
consistent even if the IRQ tracer calls into lockdep again. Touches
common code. Acked-by Peter Zijlstra.
- Correctly handle secure storage violation exception to avoid kernel
panic triggered by user space misbehaviour.
- Switch the idle->seqcount over to using raw_write_*() to avoid
"suspicious RCU usage".
- Fix memory leaks on hard unplug in pci code.
- Use kvmalloc instead of kmalloc for larger allocations in zcrypt.
- Add few missing __init annotations to static functions to avoid
section mismatch complains when functions are not inlined.
* tag 's390-5.9-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: add 3f program exception handler
lockdep: fix order in trace_hardirqs_off_caller()
s390/pci: fix leak of DMA tables on hard unplug
s390/init: add missing __init annotations
s390/zcrypt: fix kmalloc 256k failure
s390/idle: fix suspicious RCU usage
The local_storage->list will be traversed by rcu reader in parallel.
Thus, hlist_add_head_rcu() is needed in bpf_selem_link_storage_nolock().
This patch fixes it.
This part of the code has recently been refactored in bpf-next
and this patch makes changes to the new file "bpf_local_storage.c".
Instead of using the original offending commit in the Fixes tag,
the commit that created the file "bpf_local_storage.c" is used.
A separate fix has been provided to the bpf tree.
Fixes: 450af8d0f6 ("bpf: Split bpf_local_storage to bpf_sk_storage")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200916204453.2003915-1-kafai@fb.com
clang static analyzer reports this problem
trace_events_hist.c:3824:3: warning: Attempt to free
released memory
kfree(hist_data->attrs->var_defs.name[i]);
In parse_var_defs() if there is a problem allocating
var_defs.expr, the earlier var_defs.name is freed.
This free is duplicated by free_var_defs() which frees
the rest of the list.
Because free_var_defs() has to run anyway, remove the
second free fom parse_var_defs().
Link: https://lkml.kernel.org/r/20200907135845.15804-1-trix@redhat.com
Cc: stable@vger.kernel.org
Fixes: 30350d65ac ("tracing: Add variable support to hist triggers")
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Commit 32927393dc ("sysctl: pass kernel pointers to ->proc_handler")
changed ctl_table.proc_handler to take a kernel pointer. Adjust the
signature of ftrace_enable_sysctl to match ctl_table.proc_handler which
fixes the following sparse warning:
kernel/trace/ftrace.c:7544:43: warning: incorrect type in argument 3 (different address spaces)
kernel/trace/ftrace.c:7544:43: expected void *
kernel/trace/ftrace.c:7544:43: got void [noderef] __user *buffer
Link: https://lkml.kernel.org/r/20200907093207.13540-1-tklauser@distanz.ch
Fixes: 32927393dc ("sysctl: pass kernel pointers to ->proc_handler")
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
For 64bit CONFIG_BASE_SMALL=0 systems PID_MAX_LIMIT is set by default to
4194304. During boot the kernel sets a new value based on number of CPUs
but no lower than 32768. It is 1024 per CPU so with 128 CPUs the default
becomes 131072 which needs six digits.
This value can be increased during run time but must not exceed the
initial upper limit.
Systemd sometime after v241 sets it to the upper limit during boot. The
result is that when the pid exceeds five digits, the trace output is a
little hard to read because it is no longer properly padded (same like
on big iron with 98+ CPUs).
Increase the pid padding to seven digits.
Link: https://lkml.kernel.org/r/20200904082331.dcdkrr3bkn3e4qlg@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
