Pull networking updates from David Miller:
"Some highlights from this development cycle:
1) Big refactoring of ipv6 route and neigh handling to support
nexthop objects configurable as units from userspace. From David
Ahern.
2) Convert explored_states in BPF verifier into a hash table,
significantly decreased state held for programs with bpf2bpf
calls, from Alexei Starovoitov.
3) Implement bpf_send_signal() helper, from Yonghong Song.
4) Various classifier enhancements to mvpp2 driver, from Maxime
Chevallier.
5) Add aRFS support to hns3 driver, from Jian Shen.
6) Fix use after free in inet frags by allocating fqdirs dynamically
and reworking how rhashtable dismantle occurs, from Eric Dumazet.
7) Add act_ctinfo packet classifier action, from Kevin
Darbyshire-Bryant.
8) Add TFO key backup infrastructure, from Jason Baron.
9) Remove several old and unused ISDN drivers, from Arnd Bergmann.
10) Add devlink notifications for flash update status to mlxsw driver,
from Jiri Pirko.
11) Lots of kTLS offload infrastructure fixes, from Jakub Kicinski.
12) Add support for mv88e6250 DSA chips, from Rasmus Villemoes.
13) Various enhancements to ipv6 flow label handling, from Eric
Dumazet and Willem de Bruijn.
14) Support TLS offload in nfp driver, from Jakub Kicinski, Dirk van
der Merwe, and others.
15) Various improvements to axienet driver including converting it to
phylink, from Robert Hancock.
16) Add PTP support to sja1105 DSA driver, from Vladimir Oltean.
17) Add mqprio qdisc offload support to dpaa2-eth, from Ioana
Radulescu.
18) Add devlink health reporting to mlx5, from Moshe Shemesh.
19) Convert stmmac over to phylink, from Jose Abreu.
20) Add PTP PHC (Physical Hardware Clock) support to mlxsw, from
Shalom Toledo.
21) Add nftables SYNPROXY support, from Fernando Fernandez Mancera.
22) Convert tcp_fastopen over to use SipHash, from Ard Biesheuvel.
23) Track spill/fill of constants in BPF verifier, from Alexei
Starovoitov.
24) Support bounded loops in BPF, from Alexei Starovoitov.
25) Various page_pool API fixes and improvements, from Jesper Dangaard
Brouer.
26) Just like ipv4, support ref-countless ipv6 route handling. From
Wei Wang.
27) Support VLAN offloading in aquantia driver, from Igor Russkikh.
28) Add AF_XDP zero-copy support to mlx5, from Maxim Mikityanskiy.
29) Add flower GRE encap/decap support to nfp driver, from Pieter
Jansen van Vuuren.
30) Protect against stack overflow when using act_mirred, from John
Hurley.
31) Allow devmap map lookups from eBPF, from Toke Høiland-Jørgensen.
32) Use page_pool API in netsec driver, Ilias Apalodimas.
33) Add Google gve network driver, from Catherine Sullivan.
34) More indirect call avoidance, from Paolo Abeni.
35) Add kTLS TX HW offload support to mlx5, from Tariq Toukan.
36) Add XDP_REDIRECT support to bnxt_en, from Andy Gospodarek.
37) Add MPLS manipulation actions to TC, from John Hurley.
38) Add sending a packet to connection tracking from TC actions, and
then allow flower classifier matching on conntrack state. From
Paul Blakey.
39) Netfilter hw offload support, from Pablo Neira Ayuso"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2080 commits)
net/mlx5e: Return in default case statement in tx_post_resync_params
mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync().
net: dsa: add support for BRIDGE_MROUTER attribute
pkt_sched: Include const.h
net: netsec: remove static declaration for netsec_set_tx_de()
net: netsec: remove superfluous if statement
netfilter: nf_tables: add hardware offload support
net: flow_offload: rename tc_cls_flower_offload to flow_cls_offload
net: flow_offload: add flow_block_cb_is_busy() and use it
net: sched: remove tcf block API
drivers: net: use flow block API
net: sched: use flow block API
net: flow_offload: add flow_block_cb_{priv, incref, decref}()
net: flow_offload: add list handling functions
net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free()
net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_*
net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND
net: flow_offload: add flow_block_cb_setup_simple()
net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC
net: hisilicon: Add an rx_desc to adapt HI13X1_GMAC
...
Pull perf updates from Ingo Molnar:
"The main changes in this cycle on the kernel side were:
- CPU PMU and uncore driver updates to Intel Snow Ridge, IceLake,
KabyLake, AmberLake and WhiskeyLake CPUs.
- Rework the MSR probing infrastructure to make it more robust, make
it work better on virtualized systems and to better expose it on
sysfs.
- Rework PMU attributes group support based on the feedback from
Greg. The core sysfs patch that adds sysfs_update_groups() was
acked by Greg.
There's a lot of perf tooling changes as well, all around the place:
- vendor updates to Intel, cs-etm (ARM), ARM64, s390,
- various enhancements to Intel PT tooling support:
- Improve CBR (Core to Bus Ratio) packets support.
- Export power and ptwrite events to sqlite and postgresql.
- Add support for decoding PEBS via PT packets.
- Add support for samples to contain IPC ratio, collecting cycles
information from CYC packets, showing the IPC info periodically
- Allow using time ranges
- lots of updates to perf pmu, perf stat, perf trace, eBPF support,
perf record, perf diff, etc. - please see the shortlog and Git log
for details"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (252 commits)
tools arch x86: Sync asm/cpufeatures.h with the with the kernel
tools build: Check if gettid() is available before providing helper
perf jvmti: Address gcc string overflow warning for strncpy()
perf python: Remove -fstack-protector-strong if clang doesn't have it
perf annotate TUI browser: Do not use member from variable within its own initialization
perf tests: Fix record+probe_libc_inet_pton.sh for powerpc64
perf evsel: Do not rely on errno values for precise_ip fallback
perf thread: Allow references to thread objects after machine__exit()
perf header: Assign proper ff->ph in perf_event__synthesize_features()
tools arch kvm: Sync kvm headers with the kernel sources
perf script: Allow specifying the files to process guest samples
perf tools metric: Don't include duration_time in group
perf list: Avoid extra : for --raw metrics
perf vendor events intel: Metric fixes for SKX/CLX
perf tools: Fix typos / broken sentences
perf jevents: Add support for Hisi hip08 L3C PMU aliasing
perf jevents: Add support for Hisi hip08 HHA PMU aliasing
perf jevents: Add support for Hisi hip08 DDRC PMU aliasing
perf pmu: Support more complex PMU event aliasing
perf diff: Documentation -c cycles option
...
Pull scheduler updates from Ingo Molnar:
- Remove the unused per rq load array and all its infrastructure, by
Dietmar Eggemann.
- Add utilization clamping support by Patrick Bellasi. This is a
refinement of the energy aware scheduling framework with support for
boosting of interactive and capping of background workloads: to make
sure critical GUI threads get maximum frequency ASAP, and to make
sure background processing doesn't unnecessarily move to cpufreq
governor to higher frequencies and less energy efficient CPU modes.
- Add the bare minimum of tracepoints required for LISA EAS regression
testing, by Qais Yousef - which allows automated testing of various
power management features, including energy aware scheduling.
- Restructure the former tsk_nr_cpus_allowed() facility that the -rt
kernel used to modify the scheduler's CPU affinity logic such as
migrate_disable() - introduce the task->cpus_ptr value instead of
taking the address of &task->cpus_allowed directly - by Sebastian
Andrzej Siewior.
- Misc optimizations, fixes, cleanups and small enhancements - see the
Git log for details.
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
sched/uclamp: Add uclamp support to energy_compute()
sched/uclamp: Add uclamp_util_with()
sched/cpufreq, sched/uclamp: Add clamps for FAIR and RT tasks
sched/uclamp: Set default clamps for RT tasks
sched/uclamp: Reset uclamp values on RESET_ON_FORK
sched/uclamp: Extend sched_setattr() to support utilization clamping
sched/core: Allow sched_setattr() to use the current policy
sched/uclamp: Add system default clamps
sched/uclamp: Enforce last task's UCLAMP_MAX
sched/uclamp: Add bucket local max tracking
sched/uclamp: Add CPU's clamp buckets refcounting
sched/fair: Rename weighted_cpuload() to cpu_runnable_load()
sched/debug: Export the newly added tracepoints
sched/debug: Add sched_overutilized tracepoint
sched/debug: Add new tracepoint to track PELT at se level
sched/debug: Add new tracepoints to track PELT at rq level
sched/debug: Add a new sched_trace_*() helper functions
sched/autogroup: Make autogroup_path() always available
sched/wait: Deduplicate code with do-while
sched/topology: Remove unused 'sd' parameter from arch_scale_cpu_capacity()
...
Pull tracing fixes from Steven Rostedt:
"This includes three fixes:
- Fix a deadlock from a previous fix to keep module loading and
function tracing text modifications from stepping on each other
(this has a few patches to help document the issue in comments)
- Fix a crash when the snapshot buffer gets out of sync with the main
ring buffer
- Fix a memory leak when reading the memory logs"
* tag 'trace-v5.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace/x86: Anotate text_mutex split between ftrace_arch_code_modify_post_process() and ftrace_arch_code_modify_prepare()
tracing/snapshot: Resize spare buffer if size changed
tracing: Fix memory leak in tracing_err_log_open()
ftrace/x86: Add a comment to why we take text_mutex in ftrace_arch_code_modify_prepare()
ftrace/x86: Remove possible deadlock between register_kprobe() and ftrace_run_update_code()
The commit 9f255b632b ("module: Fix livepatch/ftrace module text
permissions race") causes a possible deadlock between register_kprobe()
and ftrace_run_update_code() when ftrace is using stop_machine().
The existing dependency chain (in reverse order) is:
-> #1 (text_mutex){+.+.}:
validate_chain.isra.21+0xb32/0xd70
__lock_acquire+0x4b8/0x928
lock_acquire+0x102/0x230
__mutex_lock+0x88/0x908
mutex_lock_nested+0x32/0x40
register_kprobe+0x254/0x658
init_kprobes+0x11a/0x168
do_one_initcall+0x70/0x318
kernel_init_freeable+0x456/0x508
kernel_init+0x22/0x150
ret_from_fork+0x30/0x34
kernel_thread_starter+0x0/0xc
-> #0 (cpu_hotplug_lock.rw_sem){++++}:
check_prev_add+0x90c/0xde0
validate_chain.isra.21+0xb32/0xd70
__lock_acquire+0x4b8/0x928
lock_acquire+0x102/0x230
cpus_read_lock+0x62/0xd0
stop_machine+0x2e/0x60
arch_ftrace_update_code+0x2e/0x40
ftrace_run_update_code+0x40/0xa0
ftrace_startup+0xb2/0x168
register_ftrace_function+0x64/0x88
klp_patch_object+0x1a2/0x290
klp_enable_patch+0x554/0x980
do_one_initcall+0x70/0x318
do_init_module+0x6e/0x250
load_module+0x1782/0x1990
__s390x_sys_finit_module+0xaa/0xf0
system_call+0xd8/0x2d0
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(text_mutex);
lock(cpu_hotplug_lock.rw_sem);
lock(text_mutex);
lock(cpu_hotplug_lock.rw_sem);
It is similar problem that has been solved by the commit 2d1e38f566
("kprobes: Cure hotplug lock ordering issues"). Many locks are involved.
To be on the safe side, text_mutex must become a low level lock taken
after cpu_hotplug_lock.rw_sem.
This can't be achieved easily with the current ftrace design.
For example, arm calls set_all_modules_text_rw() already in
ftrace_arch_code_modify_prepare(), see arch/arm/kernel/ftrace.c.
This functions is called:
+ outside stop_machine() from ftrace_run_update_code()
+ without stop_machine() from ftrace_module_enable()
Fortunately, the problematic fix is needed only on x86_64. It is
the only architecture that calls set_all_modules_text_rw()
in ftrace path and supports livepatching at the same time.
Therefore it is enough to move text_mutex handling from the generic
kernel/trace/ftrace.c into arch/x86/kernel/ftrace.c:
ftrace_arch_code_modify_prepare()
ftrace_arch_code_modify_post_process()
This patch basically reverts the ftrace part of the problematic
commit 9f255b632b ("module: Fix livepatch/ftrace module
text permissions race"). And provides x86_64 specific-fix.
Some refactoring of the ftrace code will be needed when livepatching
is implemented for arm or nds32. These architectures call
set_all_modules_text_rw() and use stop_machine() at the same time.
Link: http://lkml.kernel.org/r/20190627081334.12793-1-pmladek@suse.com
Fixes: 9f255b632b ("module: Fix livepatch/ftrace module text permissions race")
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
[
As reviewed by Miroslav Benes <mbenes@suse.cz>, removed return value of
ftrace_run_update_code() as it is a void function.
]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
With CONFIG_MODULES=n, the following compiler warning occurs:
/data/users/yhs/work/net-next/kernel/trace/bpf_trace.c:605:13: warning:
‘do_bpf_send_signal’ defined but not used [-Wunused-function]
static void do_bpf_send_signal(struct irq_work *entry)
The __init function send_signal_irq_work_init(), which calls
do_bpf_send_signal(), is defined under CONFIG_MODULES. Hence,
when CONFIG_MODULES=n, nobody calls static function do_bpf_send_signal(),
hence the warning.
The init function send_signal_irq_work_init() should work without
CONFIG_MODULES. Moving it out of CONFIG_MODULES
code section fixed the compiler warning, and also make bpf_send_signal()
helper work without CONFIG_MODULES.
Fixes: 8b401f9ed2 ("bpf: implement bpf_send_signal() helper")
Reported-By: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Pull networking fixes from David Miller:
"Lots of bug fixes here:
1) Out of bounds access in __bpf_skc_lookup, from Lorenz Bauer.
2) Fix rate reporting in cfg80211_calculate_bitrate_he(), from John
Crispin.
3) Use after free in psock backlog workqueue, from John Fastabend.
4) Fix source port matching in fdb peer flow rule of mlx5, from Raed
Salem.
5) Use atomic_inc_not_zero() in fl6_sock_lookup(), from Eric Dumazet.
6) Network header needs to be set for packet redirect in nfp, from
John Hurley.
7) Fix udp zerocopy refcnt, from Willem de Bruijn.
8) Don't assume linear buffers in vxlan and geneve error handlers,
from Stefano Brivio.
9) Fix TOS matching in mlxsw, from Jiri Pirko.
10) More SCTP cookie memory leak fixes, from Neil Horman.
11) Fix VLAN filtering in rtl8366, from Linus Walluij.
12) Various TCP SACK payload size and fragmentation memory limit fixes
from Eric Dumazet.
13) Use after free in pneigh_get_next(), also from Eric Dumazet.
14) LAPB control block leak fix from Jeremy Sowden"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (145 commits)
lapb: fixed leak of control-blocks.
tipc: purge deferredq list for each grp member in tipc_group_delete
ax25: fix inconsistent lock state in ax25_destroy_timer
neigh: fix use-after-free read in pneigh_get_next
tcp: fix compile error if !CONFIG_SYSCTL
hv_sock: Suppress bogus "may be used uninitialized" warnings
be2net: Fix number of Rx queues used for flow hashing
net: handle 802.1P vlan 0 packets properly
tcp: enforce tcp_min_snd_mss in tcp_mtu_probing()
tcp: add tcp_min_snd_mss sysctl
tcp: tcp_fragment() should apply sane memory limits
tcp: limit payload size of sacked skbs
Revert "net: phylink: set the autoneg state in phylink_phy_change"
bpf: fix nested bpf tracepoints with per-cpu data
bpf: Fix out of bounds memory access in bpf_sk_storage
vsock/virtio: set SOCK_DONE on peer shutdown
net: dsa: rtl8366: Fix up VLAN filtering
net: phylink: set the autoneg state in phylink_phy_change
net: add high_order_alloc_disable sysctl/static key
tcp: add tcp_tx_skb_cache sysctl
...
BPF_PROG_TYPE_RAW_TRACEPOINTs can be executed nested on the same CPU, as
they do not increment bpf_prog_active while executing.
This enables three levels of nesting, to support
- a kprobe or raw tp or perf event,
- another one of the above that irq context happens to call, and
- another one in nmi context
(at most one of which may be a kprobe or perf event).
Fixes: 20b9d7ac48 ("bpf: avoid excessive stack usage for perf_sample_data")
Signed-off-by: Matt Mullins <mmullins@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull tracing fixes from Steven Rostedt:
- Out of range read of stack trace output
- Fix for NULL pointer dereference in trace_uprobe_create()
- Fix to a livepatching / ftrace permission race in the module code
- Fix for NULL pointer dereference in free_ftrace_func_mapper()
- A couple of build warning clean ups
* tag 'trace-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Fix NULL pointer dereference in free_ftrace_func_mapper()
module: Fix livepatch/ftrace module text permissions race
tracing/uprobe: Fix obsolete comment on trace_uprobe_create()
tracing/uprobe: Fix NULL pointer dereference in trace_uprobe_create()
tracing: Make two symbols static
tracing: avoid build warning with HAVE_NOP_MCOUNT
tracing: Fix out-of-range read in trace_stack_print()
Selecting HAVE_NOP_MCOUNT enables -mnop-mcount (if gcc supports it)
and sets CC_USING_NOP_MCOUNT. Reuse __is_defined (which is suitable for
testing CC_USING_* defines) to avoid conditional compilation and fix
the following gcc 9 warning on s390:
kernel/trace/ftrace.c:2514:1: warning: ‘ftrace_code_disable’ defined
but not used [-Wunused-function]
Link: http://lkml.kernel.org/r/patch.git-1a82d13f33ac.your-ad-here.call-01559732716-ext-6629@work.hours
Fixes: 2f4df0017b ("tracing: Add -mcount-nop option support")
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, non-privileged user could only use uprobe with
kernel.perf_event_paranoid = -1
However, setting perf_event_paranoid to -1 leaks other users' processes to
non-privileged uprobes.
To introduce proper permission control of uprobes, we are building the
following system:
A daemon with CAP_SYS_ADMIN is in charge to create uprobes via tracefs;
Users asks the daemon to create uprobes;
Then user can attach uprobe only to processes owned by the user.
This patch allows non-privileged user to attach uprobe to processes owned
by the user.
The following example shows how to use uprobe with non-privileged user.
This is based on Brendan's blog post [1]
1. Create uprobe with root:
sudo perf probe -x 'readline%return +0($retval):string'
2. Then non-root user can use the uprobe as:
perf record -vvv -e probe_bash:readline__return -p <pid> sleep 20
perf script
[1] http://www.brendangregg.com/blog/2015-06-28/linux-ftrace-uprobe.html
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <kernel-team@fb.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190507161545.788381-1-songliubraving@fb.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In commit:
4b53a3412d ("sched/core: Remove the tsk_nr_cpus_allowed() wrapper")
the tsk_nr_cpus_allowed() wrapper was removed. There was not
much difference in !RT but in RT we used this to implement
migrate_disable(). Within a migrate_disable() section the CPU mask is
restricted to single CPU while the "normal" CPU mask remains untouched.
As an alternative implementation Ingo suggested to use:
struct task_struct {
const cpumask_t *cpus_ptr;
cpumask_t cpus_mask;
};
with
t->cpus_ptr = &t->cpus_mask;
In -RT we then can switch the cpus_ptr to:
t->cpus_ptr = &cpumask_of(task_cpu(p));
in a migration disabled region. The rules are simple:
- Code that 'uses' ->cpus_allowed would use the pointer.
- Code that 'modifies' ->cpus_allowed would use the direct mask.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190423142636.14347-1-bigeasy@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2019-05-31
The following pull-request contains BPF updates for your *net-next* tree.
Lots of exciting new features in the first PR of this developement cycle!
The main changes are:
1) misc verifier improvements, from Alexei.
2) bpftool can now convert btf to valid C, from Andrii.
3) verifier can insert explicit ZEXT insn when requested by 32-bit JITs.
This feature greatly improves BPF speed on 32-bit architectures. From Jiong.
4) cgroups will now auto-detach bpf programs. This fixes issue of thousands
bpf programs got stuck in dying cgroups. From Roman.
5) new bpf_send_signal() helper, from Yonghong.
6) cgroup inet skb programs can signal CN to the stack, from Lawrence.
7) miscellaneous cleanups, from many developers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull tracing fix from Steven Rostedt:
"This fixes a memory leak from the error path in the event filter
logic"
* tag 'trace-v5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Avoid memory leak in predicate_parse()
Now that we don't have __rcu markers on the bpf_prog_array helpers,
let's use proper rcu_dereference_protected to obtain array pointer
under mutex.
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Commit c19fa94a8f ("Add HAVE_64BIT_ALIGNED_ACCESS") added the config for
architectures that required 64bit aligned access for all 64bit words. As
the ftrace ring buffer stores data on 4 byte alignment, this config option
was used to force it to store data on 8 byte alignment to make sure the data
being stored and written directly into the ring buffer was 8 byte aligned as
it would cause issues trying to write an 8 byte word on a 4 not 8 byte
aligned memory location.
But with the removal of the metag architecture, which was the only
architecture to use this, there is no architecture supported by Linux that
requires 8 byte aligne access for all 8 byte words (4 byte alignment is good
enough). Removing this config can simplify the code a bit.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Commit 8b401f9ed2 ("bpf: implement bpf_send_signal() helper")
introduced bpf_send_signal() helper. If the context is nmi,
the sending signal work needs to be deferred to irq_work.
If the signal is invalid, the error will appear in irq_work
and it won't be propagated to user.
This patch did an early check in the helper itself to notify
user invalid signal, as suggested by Daniel.
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Pull tracing warning fix from Steven Rostedt:
"Make the GCC 9 warning for sub struct memset go away.
GCC 9 now warns about calling memset() on partial structures when it
goes across multiple fields. This adds a helper for the place in
tracing that does this type of clearing of a structure"
* tag 'trace-v5.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Silence GCC 9 array bounds warning
Custom trampolines can only be enabled if there is only a single ops
attached to it. If there's only a single callback registered to a function,
and the ops has a trampoline registered for it, then we can call the
trampoline directly. This is very useful for improving the performance of
ftrace and livepatch.
If more than one callback is registered to a function, the general
trampoline is used, and the custom trampoline is not restored back to the
direct call even if all the other callbacks were unregistered and we are
back to one callback for the function.
To fix this, set FTRACE_FL_TRAMP flag if rec count is decremented
to one, and the ops that left has a trampoline.
Testing After this patch :
insmod livepatch_unshare_files.ko
cat /sys/kernel/debug/tracing/enabled_functions
unshare_files (1) R I tramp: 0xffffffffc0000000(klp_ftrace_handler+0x0/0xa0) ->ftrace_ops_assist_func+0x0/0xf0
echo unshare_files > /sys/kernel/debug/tracing/set_ftrace_filter
echo function > /sys/kernel/debug/tracing/current_tracer
cat /sys/kernel/debug/tracing/enabled_functions
unshare_files (2) R I ->ftrace_ops_list_func+0x0/0x150
echo nop > /sys/kernel/debug/tracing/current_tracer
cat /sys/kernel/debug/tracing/enabled_functions
unshare_files (1) R I tramp: 0xffffffffc0000000(klp_ftrace_handler+0x0/0xa0) ->ftrace_ops_assist_func+0x0/0xf0
Link: http://lkml.kernel.org/r/1556969979-111047-1-git-send-email-cj.chengjian@huawei.com
Signed-off-by: Cheng Jian <cj.chengjian@huawei.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The trace event self tests enable loop through *all* events, enables each
one, one at a time, runs some code to trigger various events (not
necessarily the same events), and checks if anything went wrong. The issue
is that trace events are usually the least likely start up test to cause a
problem, but they take the longest to run (because there are so many
events). When one of the other tests trigger a bug, the trace event start up
tests causes the bisect to take much longer, because it takes 10s of seconds
to get through the trace event tests.
By making them a separate config (even though they are enabled by default if
start up tests are set), it is possible to turn them off and still run the
other tracing start up tests much quicker.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add kprobe_event= boot parameter to define kprobe events
at boot time.
The definition syntax is similar to tracefs/kprobe_events
interface, but use ',' and ';' instead of ' ' and '\n'
respectively. e.g.
kprobe_event=p,vfs_read,$arg1,$arg2
This puts a probe on vfs_read with argument1 and 2, and
enable the new event.
Link: http://lkml.kernel.org/r/155851395498.15728.830529496248543583.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Support user-space dereference syntax for probe event arguments
to dereference the data-structure or array in user-space.
The syntax is just adding 'u' before an offset value.
+|-u<OFFSET>(<FETCHARG>)
e.g. +u8(%ax), +u0(+0(%si))
For example, if you probe do_sched_setscheduler(pid, policy,
param) and record param->sched_priority, you can add new
probe as below;
p do_sched_setscheduler priority=+u0($arg3)
Note that kprobe event provides this and it doesn't change the
dereference method automatically because we do not know whether
the given address is in userspace or kernel on some archs.
So as same as "ustring", this is an option for user, who has to
carefully choose the dereference method.
Link: http://lkml.kernel.org/r/155789872187.26965.4468456816590888687.stgit@devnote2
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add "ustring" type for fetching user-space string from kprobe event.
User can specify ustring type at uprobe event, and it is same as
"string" for uprobe.
Note that probe-event provides this option but it doesn't choose the
correct type automatically since we have not way to decide the address
is in user-space or not on some arch (and on some other arch, you can
fetch the string by "string" type). So user must carefully check the
target code (e.g. if you see __user on the target variable) and
use this new type.
Link: http://lkml.kernel.org/r/155789871009.26965.14167558859557329331.stgit@devnote2
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Starting with GCC 9, -Warray-bounds detects cases when memset is called
starting on a member of a struct but the size to be cleared ends up
writing over further members.
Such a call happens in the trace code to clear, at once, all members
after and including `seq` on struct trace_iterator:
In function 'memset',
inlined from 'ftrace_dump' at kernel/trace/trace.c:8914:3:
./include/linux/string.h:344:9: warning: '__builtin_memset' offset
[8505, 8560] from the object at 'iter' is out of the bounds of
referenced subobject 'seq' with type 'struct trace_seq' at offset
4368 [-Warray-bounds]
344 | return __builtin_memset(p, c, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
In order to avoid GCC complaining about it, we compute the address
ourselves by adding the offsetof distance instead of referring
directly to the member.
Since there are two places doing this clear (trace.c and trace_kdb.c),
take the chance to move the workaround into a single place in
the internal header.
Link: http://lkml.kernel.org/r/20190523124535.GA12931@gmail.com
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
[ Removed unnecessary parenthesis around "iter" ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Pull tracing fixes from Steven Rostedt:
"Tom Zanussi sent me some small fixes and cleanups to the histogram
code and I forgot to incorporate them.
I also added a small clean up patch that was sent to me a while ago
and I just noticed it"
* tag 'trace-v5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
kernel/trace/trace.h: Remove duplicate header of trace_seq.h
tracing: Add a check_val() check before updating cond_snapshot() track_val
tracing: Check keys for variable references in expressions too
tracing: Prevent hist_field_var_ref() from accessing NULL tracing_map_elts
This patch tries to solve the following specific use case.
Currently, bpf program can already collect stack traces
through kernel function get_perf_callchain()
when certain events happens (e.g., cache miss counter or
cpu clock counter overflows). But such stack traces are
not enough for jitted programs, e.g., hhvm (jited php).
To get real stack trace, jit engine internal data structures
need to be traversed in order to get the real user functions.
bpf program itself may not be the best place to traverse
the jit engine as the traversing logic could be complex and
it is not a stable interface either.
Instead, hhvm implements a signal handler,
e.g. for SIGALARM, and a set of program locations which
it can dump stack traces. When it receives a signal, it will
dump the stack in next such program location.
Such a mechanism can be implemented in the following way:
. a perf ring buffer is created between bpf program
and tracing app.
. once a particular event happens, bpf program writes
to the ring buffer and the tracing app gets notified.
. the tracing app sends a signal SIGALARM to the hhvm.
But this method could have large delays and causing profiling
results skewed.
This patch implements bpf_send_signal() helper to send
a signal to hhvm in real time, resulting in intended stack traces.
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Pull SPDX update from Greg KH:
"Here is a series of patches that add SPDX tags to different kernel
files, based on two different things:
- SPDX entries are added to a bunch of files that we missed a year
ago that do not have any license information at all.
These were either missed because the tool saw the MODULE_LICENSE()
tag, or some EXPORT_SYMBOL tags, and got confused and thought the
file had a real license, or the files have been added since the
last big sweep, or they were Makefile/Kconfig files, which we
didn't touch last time.
- Add GPL-2.0-only or GPL-2.0-or-later tags to files where our scan
tools can determine the license text in the file itself. Where this
happens, the license text is removed, in order to cut down on the
700+ different ways we have in the kernel today, in a quest to get
rid of all of these.
These patches have been out for review on the linux-spdx@vger mailing
list, and while they were created by automatic tools, they were
hand-verified by a bunch of different people, all whom names are on
the patches are reviewers.
The reason for these "large" patches is if we were to continue to
progress at the current rate of change in the kernel, adding license
tags to individual files in different subsystems, we would be finished
in about 10 years at the earliest.
There will be more series of these types of patches coming over the
next few weeks as the tools and reviewers crunch through the more
"odd" variants of how to say "GPLv2" that developers have come up with
over the years, combined with other fun oddities (GPL + a BSD
disclaimer?) that are being unearthed, with the goal for the whole
kernel to be cleaned up.
These diffstats are not small, 3840 files are touched, over 10k lines
removed in just 24 patches"
* tag 'spdx-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (24 commits)
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 25
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 24
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 23
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 22
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 21
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 20
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 19
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 18
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 17
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 15
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 14
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 12
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 11
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 10
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 9
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 7
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 5
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 4
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 3
...
Without this check a snapshot is taken whenever a bucket's max is hit,
rather than only when the global max is hit, as it should be.
Before:
In this example, we do a first run of the workload (cyclictest),
examine the output, note the max ('triggering value') (347), then do
a second run and note the max again.
In this case, the max in the second run (39) is below the max in the
first run, but since we haven't cleared the histogram, the first max
is still in the histogram and is higher than any other max, so it
should still be the max for the snapshot. It isn't however - the
value should still be 347 after the second run.
# echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_waking/trigger
# echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0:onmax($wakeup_lat).save(next_prio,next_comm,prev_pid,prev_prio,prev_comm):onmax($wakeup_lat).snapshot() if next_comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
# cyclictest -p 80 -n -s -t 2 -D 2
# cat /sys/kernel/debug/tracing/events/sched/sched_switch/hist
{ next_pid: 2143 } hitcount: 199
max: 44 next_prio: 120 next_comm: cyclictest
prev_pid: 0 prev_prio: 120 prev_comm: swapper/4
{ next_pid: 2145 } hitcount: 1325
max: 38 next_prio: 19 next_comm: cyclictest
prev_pid: 0 prev_prio: 120 prev_comm: swapper/2
{ next_pid: 2144 } hitcount: 1982
max: 347 next_prio: 19 next_comm: cyclictest
prev_pid: 0 prev_prio: 120 prev_comm: swapper/6
Snapshot taken (see tracing/snapshot). Details:
triggering value { onmax($wakeup_lat) }: 347
triggered by event with key: { next_pid: 2144 }
# cyclictest -p 80 -n -s -t 2 -D 2
# cat /sys/kernel/debug/tracing/events/sched/sched_switch/hist
{ next_pid: 2143 } hitcount: 199
max: 44 next_prio: 120 next_comm: cyclictest
prev_pid: 0 prev_prio: 120 prev_comm: swapper/4
{ next_pid: 2148 } hitcount: 199
max: 16 next_prio: 120 next_comm: cyclictest
prev_pid: 0 prev_prio: 120 prev_comm: swapper/1
{ next_pid: 2145 } hitcount: 1325
max: 38 next_prio: 19 next_comm: cyclictest
prev_pid: 0 prev_prio: 120 prev_comm: swapper/2
{ next_pid: 2150 } hitcount: 1326
max: 39 next_prio: 19 next_comm: cyclictest
prev_pid: 0 prev_prio: 120 prev_comm: swapper/4
{ next_pid: 2144 } hitcount: 1982
max: 347 next_prio: 19 next_comm: cyclictest
prev_pid: 0 prev_prio: 120 prev_comm: swapper/6
{ next_pid: 2149 } hitcount: 1983
max: 130 next_prio: 19 next_comm: cyclictest
prev_pid: 0 prev_prio: 120 prev_comm: swapper/0
Snapshot taken (see tracing/snapshot). Details:
triggering value { onmax($wakeup_lat) }: 39
triggered by event with key: { next_pid: 2150 }
After:
In this example, we do a first run of the workload (cyclictest),
examine the output, note the max ('triggering value') (375), then do
a second run and note the max again.
In this case, the max in the second run is still 375, the highest in
any bucket, as it should be.
# cyclictest -p 80 -n -s -t 2 -D 2
# cat /sys/kernel/debug/tracing/events/sched/sched_switch/hist
{ next_pid: 2072 } hitcount: 200
max: 28 next_prio: 120 next_comm: cyclictest
prev_pid: 0 prev_prio: 120 prev_comm: swapper/5
{ next_pid: 2074 } hitcount: 1323
max: 375 next_prio: 19 next_comm: cyclictest
prev_pid: 0 prev_prio: 120 prev_comm: swapper/2
{ next_pid: 2073 } hitcount: 1980
max: 153 next_prio: 19 next_comm: cyclictest
prev_pid: 0 prev_prio: 120 prev_comm: swapper/6
Snapshot taken (see tracing/snapshot). Details:
triggering value { onmax($wakeup_lat) }: 375
triggered by event with key: { next_pid: 2074 }
# cyclictest -p 80 -n -s -t 2 -D 2
# cat /sys/kernel/debug/tracing/events/sched/sched_switch/hist
{ next_pid: 2101 } hitcount: 199
max: 49 next_prio: 120 next_comm: cyclictest
prev_pid: 0 prev_prio: 120 prev_comm: swapper/6
{ next_pid: 2072 } hitcount: 200
max: 28 next_prio: 120 next_comm: cyclictest
prev_pid: 0 prev_prio: 120 prev_comm: swapper/5
{ next_pid: 2074 } hitcount: 1323
max: 375 next_prio: 19 next_comm: cyclictest
prev_pid: 0 prev_prio: 120 prev_comm: swapper/2
{ next_pid: 2103 } hitcount: 1325
max: 74 next_prio: 19 next_comm: cyclictest
prev_pid: 0 prev_prio: 120 prev_comm: swapper/4
{ next_pid: 2073 } hitcount: 1980
max: 153 next_prio: 19 next_comm: cyclictest
prev_pid: 0 prev_prio: 120 prev_comm: swapper/6
{ next_pid: 2102 } hitcount: 1981
max: 84 next_prio: 19 next_comm: cyclictest
prev_pid: 12 prev_prio: 120 prev_comm: kworker/0:1
Snapshot taken (see tracing/snapshot). Details:
triggering value { onmax($wakeup_lat) }: 375
triggered by event with key: { next_pid: 2074 }
Link: http://lkml.kernel.org/r/95958351329f129c07504b4d1769c47a97b70d65.1555597045.git.tom.zanussi@linux.intel.com
Cc: stable@vger.kernel.org
Fixes: a3785b7eca ("tracing: Add hist trigger snapshot() action")
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
