All (two) callers of fsnotify_parent() also call fsnotify() to notify
the child inode. Move the second fsnotify() call into fsnotify_parent().
This will allow more flexibility in making decisions about which of the
two event falvors should be sent.
Using 'goto notify_child' in the inline helper seems a bit strange, but
it mimics the code in __fsnotify_parent() for clarity and the goto
pattern will become less strage after following patches are applied.
Link: https://lore.kernel.org/r/20200708111156.24659-2-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
The fsnotify paths are trivial to hit even when there are no watchers and
they are surprisingly expensive. For example, every successful vfs_write()
hits fsnotify_modify which calls both fsnotify_parent and fsnotify unless
FMODE_NONOTIFY is set which is an internal flag invisible to userspace.
As it stands, fsnotify_parent is a guaranteed functional call even if there
are no watchers and fsnotify() does a substantial amount of unnecessary
work before it checks if there are any watchers. A perf profile showed
that applying mnt->mnt_fsnotify_mask in fnotify() was almost half of the
total samples taken in that function during a test. This patch rearranges
the fast paths to reduce the amount of work done when there are no
watchers.
The test motivating this was "perf bench sched messaging --pipe". Despite
the fact the pipes are anonymous, fsnotify is still called a lot and
the overhead is noticeable even though it's completely pointless. It's
likely the overhead is negligible for real IO so this is an extreme
example. This is a comparison of hackbench using processes and pipes on
a 1-socket machine with 8 CPU threads without fanotify watchers.
5.7.0 5.7.0
vanilla fastfsnotify-v1r1
Amean 1 0.4837 ( 0.00%) 0.4630 * 4.27%*
Amean 3 1.5447 ( 0.00%) 1.4557 ( 5.76%)
Amean 5 2.6037 ( 0.00%) 2.4363 ( 6.43%)
Amean 7 3.5987 ( 0.00%) 3.4757 ( 3.42%)
Amean 12 5.8267 ( 0.00%) 5.6983 ( 2.20%)
Amean 18 8.4400 ( 0.00%) 8.1327 ( 3.64%)
Amean 24 11.0187 ( 0.00%) 10.0290 * 8.98%*
Amean 30 13.1013 ( 0.00%) 12.8510 ( 1.91%)
Amean 32 13.9190 ( 0.00%) 13.2410 ( 4.87%)
5.7.0 5.7.0
vanilla fastfsnotify-v1r1
Duration User 157.05 152.79
Duration System 1279.98 1219.32
Duration Elapsed 182.81 174.52
This is showing that the latencies are improved by roughly 2-9%. The
variability is not shown but some of these results are within the noise
as this workload heavily overloads the machine. That said, the system CPU
usage is reduced by quite a bit so it makes sense to avoid the overhead
even if it is a bit tricky to detect at times. A perf profile of just 1
group of tasks showed that 5.14% of samples taken were in either fsnotify()
or fsnotify_parent(). With the patch, 2.8% of samples were in fsnotify,
mostly function entry and the initial check for watchers. The check for
watchers is complicated enough that inlining it may be controversial.
[Amir] Slightly simplify with mnt_or_sb_mask => marks_mask
Link: https://lore.kernel.org/r/20200708111156.24659-1-amir73il@gmail.com
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
When user provides large buffer for events and there are lots of events
available, we can try to copy them all to userspace without scheduling
which can softlockup the kernel (furthermore exacerbated by the
contention on notification_lock). Add a scheduling point after copying
each event.
Note that usually the real underlying problem is the cost of fanotify
event merging and the resulting contention on notification_lock but this
is a cheap way to somewhat reduce the problem until we can properly
address that.
Reported-by: Francesco Ruggeri <fruggeri@arista.com>
Link: https://lore.kernel.org/lkml/20200714025417.A25EB95C0339@us180.sjc.aristanetworks.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
The ioctl encoding for this parameter is a long but the documentation says
it should be an int and the kernel drivers expect it to be an int. If the
fuse driver treats this as a long it might end up scribbling over the stack
of a userspace process that only allocated enough space for an int.
This was previously discussed in [1] and a patch for fuse was proposed in
[2]. From what I can tell the patch in [2] was nacked in favor of adding
new, "fixed" ioctls and using those from userspace. However there is still
no "fixed" version of these ioctls and the fact is that it's sometimes
infeasible to change all userspace to use the new one.
Handling the ioctls specially in the fuse driver seems like the most
pragmatic way for fuse servers to support them without causing crashes in
userspace applications that call them.
[1]: https://lore.kernel.org/linux-fsdevel/20131126200559.GH20559@hall.aurel32.net/T/
[2]: https://sourceforge.net/p/fuse/mailman/message/31771759/
Signed-off-by: Chirantan Ekbote <chirantan@chromium.org>
Fixes: 59efec7b90 ("fuse: implement ioctl support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
commit 0688e64bc6 ("NFS: Allow signal interruption of
NFS4ERR_DELAYed operations") introduces nfs4_delay_interruptible
which also needs an _unsafe version to avoid the following call
trace for the same reason explained in commit 416ad3c9c0 ("freezer:
add unsafe versions of freezable helpers for NFS")
CPU: 4 PID: 3968 Comm: rm Tainted: G W 5.8.0-rc4 #1
Hardware name: Marvell OcteonTX CN96XX board (DT)
Call trace:
dump_backtrace+0x0/0x1dc
show_stack+0x20/0x30
dump_stack+0xdc/0x150
debug_check_no_locks_held+0x98/0xa0
nfs4_delay_interruptible+0xd8/0x120
nfs4_handle_exception+0x130/0x170
nfs4_proc_rmdir+0x8c/0x220
nfs_rmdir+0xa4/0x360
vfs_rmdir.part.0+0x6c/0x1b0
do_rmdir+0x18c/0x210
__arm64_sys_unlinkat+0x64/0x7c
el0_svc_common.constprop.0+0x7c/0x110
do_el0_svc+0x24/0xa0
el0_sync_handler+0x13c/0x1b8
el0_sync+0x158/0x180
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In the course of some operations, we look up the perag from
the mount multiple times to get or change perag information.
These are often very short pieces of code, so while the
lookup cost is generally low, the cost of the lookup is far
higher than the cost of the operation we are doing on the
perag.
Since we changed buffers to hold references to the perag
they are cached in, many modification contexts already hold
active references to the perag that are held across these
operations. This is especially true for any operation that
is serialised by an allocation group header buffer.
In these cases, we can just use the buffer's reference to
the perag to avoid needing to do lookups to access the
perag. This means that many operations don't need to do
perag lookups at all to access the perag because they've
already looked up objects that own persistent references
and hence can use that reference instead.
Cc: Dave Chinner <dchinner@redhat.com>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
fuse_writepages() ignores some errors taken from fuse_writepages_fill() I
believe it is a bug: if .writepages is called with WB_SYNC_ALL it should
either guarantee that all data was successfully saved or return error.
Fixes: 26d614df1d ("fuse: Implement writepages callback")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
fuse_writepages_fill uses following construction:
if (wpa && ap->num_pages &&
(A || B || C)) {
action;
} else if (wpa && D) {
if (E) {
the same action;
}
}
- ap->num_pages check is always true and can be removed
- "if" and "else if" calls the same action and can be merged.
Move checking A, B, C, D, E conditions to a helper, add comments.
Original-patch-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Previous patch changed handling of remount/reconfigure to ignore all
options, including those that are unknown to the fuse kernel fs. This was
done for backward compatibility, but this likely only affects the old
mount(2) API.
The new fsconfig(2) based reconfiguration could possibly be improved. This
would make the new API less of a drop in replacement for the old, OTOH this
is a good chance to get rid of some weirdnesses in the old API.
Several other behaviors might make sense:
1) unknown options are rejected, known options are ignored
2) unknown options are rejected, known options are rejected if the value
is changed, allowed otherwise
3) all options are rejected
Prior to the backward compatibility fix to ignore all options all known
options were accepted (1), even if they change the value of a mount
parameter; fuse_reconfigure() does not look at the config values set by
fuse_parse_param().
To fix that we'd need to verify that the value provided is the same as set
in the initial configuration (2). The major drawback is that this is much
more complex than just rejecting all attempts at changing options (3);
i.e. all options signify initial configuration values and don't make sense
on reconfigure.
This patch opts for (3) with the rationale that no mount options are
reconfigurable in fuse.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The command
mount -o remount -o unknownoption /mnt/fuse
succeeds on kernel versions prior to v5.4 and fails on kernel version at or
after. This is because fuse_parse_param() rejects any unrecognised options
in case of FS_CONTEXT_FOR_RECONFIGURE, just as for FS_CONTEXT_FOR_MOUNT.
This causes a regression in case the fuse filesystem is in fstab, since
remount sends all options found there to the kernel; even ones that are
meant for the initial mount and are consumed by the userspace fuse server.
Fix this by ignoring mount options, just as fuse_remount_fs() did prior to
the conversion to the new API.
Reported-by: Stefan Priebe <s.priebe@profihost.ag>
Fixes: c30da2e981 ("fuse: convert to use the new mount API")
Cc: <stable@vger.kernel.org> # v5.4
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
s_op->remount_fs() is only called from legacy_reconfigure(), which is not
used after being converted to the new API.
Convert to using ->reconfigure(). This restores the previous behavior of
syncing the filesystem and rejecting MS_MANDLOCK on remount.
Fixes: c30da2e981 ("fuse: convert to use the new mount API")
Cc: <stable@vger.kernel.org> # v5.4
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
fuse_writepages_fill() calls tree_insert() with ap->num_pages = 0 which
triggers the following warning:
WARNING: CPU: 1 PID: 17211 at fs/fuse/file.c:1728 tree_insert+0xab/0xc0 [fuse]
RIP: 0010:tree_insert+0xab/0xc0 [fuse]
Call Trace:
fuse_writepages_fill+0x5da/0x6a0 [fuse]
write_cache_pages+0x171/0x470
fuse_writepages+0x8a/0x100 [fuse]
do_writepages+0x43/0xe0
Fix up the warning and clean up the code around rb-tree insertion:
- Rename tree_insert() to fuse_insert_writeback() and make it return the
conflicting entry in case of failure
- Re-add tree_insert() as a wrapper around fuse_insert_writeback()
- Rename fuse_writepage_in_flight() to fuse_writepage_add() and reverse
the meaning of the return value to mean
+ "true" in case the writepage entry was successfully added
+ "false" in case it was in-fligt queued on an existing writepage
entry's auxiliary list or the existing writepage entry's temporary
page updated
Switch from fuse_find_writeback() + tree_insert() to
fuse_insert_writeback()
- Move setting orig_pages to before inserting/updating the entry; this may
result in the orig_pages value being discarded later in case of an
in-flight request
- In case of a new writepage entry use fuse_writepage_add()
unconditionally, only set data->wpa if the entry was added.
Fixes: 6b2fb79963 ("fuse: optimize writepages search")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Original-path-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
In fuse_writepage_end() the old writepages entry needs to be removed from
the rbtree before inserting the new one, otherwise tree_insert() would
fail. This is a very rare codepath and no reproducer exists.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Link: https://lore.kernel.org/r/20200713200738.37800-1-grandmaster@al2klimov.de
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Implement client side caching for NFSv4.2 extended attributes. The cache
is a per-inode hashtable, with name/value entries. There is one special
entry for the listxattr cache.
NFS inodes have a pointer to a cache structure. The cache structure is
allocated on demand, freed when the cache is invalidated.
Memory shrinkers keep the size in check. Large entries (> PAGE_SIZE)
are collected by a separate shrinker, and freed more aggressively
than others.
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Now that all the lower level code is there to make the RPC calls, hook
it in to the xattr handlers and the listxattr entry point, to make them
available.
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Implement the extended attribute procedures for NFSv4.2 extended
attribute support (RFC 8276).
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Make the buf_to_pages_noslab function available to the rest of the NFS
code. Rename it to nfs4_buf_to_pages_noslab to be consistent.
This will be used later in the NFSv4.2 xattr code.
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Define the NFS_INO_INVALID_XATTR flag, to be used for the NFSv4.2 xattr
cache, and use it where appropriate.
No functional change as yet.
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Until now, change attributes in change_info form were only returned by
directory operations. However, they are also used for the RFC 8276
extended attribute operations, which work on both directories
and regular files. Modify update_changeattr to deal:
* Rename it to nfs4_update_changeattr and make it non-static.
* Don't always use INO_INVALID_DATA, this isn't needed for a
directory that only had its extended attributes changed by us.
* Existing callers now always pass in INO_INVALID_DATA.
For the current callers of this function, behavior is unchanged.
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
RFC 8276 defines separate ACCESS bits for extended attribute checking.
Query them in nfs_do_access and opendata.
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The only consumer of nfs_access_get_cached_rcu and nfs_access_cached
calls these static functions in order to first try RCU access, and
then locked access.
Combine them in to a single function, and call that. Make this function
available to the rest of the NFS code.
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Define the argument and response structures that will be used for
RFC 8276 extended attribute RPC calls, and implement the necessary
functions to encode/decode the extended attribute operations.
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Query the server for extended attribute support, and record it
as the NFS_CAP_XATTR flag in the server capabilities.
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Set limits for extended attributes (attribute value size and listxattr
buffer size), based on the fs-independent limits (XATTR_*_MAX).
Define the maximum XDR sizes for the RFC 8276 XATTR operations.
In the case of operations that carry a larger payload (SETXATTR,
GETXATTR, LISTXATTR), these exclude that payload, which is added
as separate pages, like other operations do.
Define, much like for read and write operations, the maximum overhead
sizes for get/set/listxattr, and use them to limit the maximum payload
size for those operations, in combination with the channel attributes.
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If the rpc_pipefs is unmounted, then the rpc_pipe->dentry becomes NULL
and dereferencing the dentry->d_sb will trigger an oops. The only
reason we're doing that is to determine the nfsd_net, which could
instead be passed in by the caller. So do that instead.
Fixes: 11a60d1592 ("nfsd: add a "GetVersion" upcall for nfsdcld")
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
We recently fixed lease breaking so that a client's actions won't break
its own delegations.
But we still have an unnecessary self-conflict when granting
delegations: a client's own write opens will prevent us from handing out
a read delegation even when no other client has the file open for write.
Fix that by turning off the checks for conflicting opens under
vfs_setlease, and instead performing those checks in the nfsd code.
We don't depend much on locks here: instead we acquire the delegation,
then check for conflicts, and drop the delegation again if we find any.
The check beforehand is an optimization of sorts, just to avoid
acquiring the delegation unnecessarily. There's a race where the first
check could cause us to deny the delegation when we could have granted
it. But, that's OK, delegation grants are optional (and probably not
even a good idea in that case).
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
A single character (line break) should be put into a sequence.
Thus use the corresponding function "seq_putc()".
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Check if user extended attributes are supported for an inode,
and return the answer when being queried for file attributes.
An exported filesystem can now signal its RFC8276 user extended
attributes capability.
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Implement the main entry points for the *XATTR operations.
Add functions to calculate the reply size for the user extended attribute
operations, and implement the XDR encode / decode logic for these
operations.
Add the user extended attributes operations to nfsd4_ops.
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Add the structures used in extended attribute request / response handling.
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Since the NFSv4.2 extended attributes extension defines 3 new access
bits for xattr operations, take them in to account when validating
what the client is asking for, and when checking permissions.
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
This adds the filehandle based functions for the xattr operations
that call in to the vfs layer to do the actual work.
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
[ cel: address checkpatch.pl complaint ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Add defines for server-side extended attribute support. Most have
already been added as part of client support, but these are
the network order error codes for the noxattr and xattr2big errors,
and the addition of the xattr support to the supported file
attributes (if configured).
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
nfs4_decode_write has code to parse incoming XDR write data in to
a kvec head, and a list of pages.
Put this code in to a separate function, so that it can be used
later by the xattr code, for setxattr. No functional change.
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Add a function that checks is an extended attribute namespace is
supported for an inode, meaning that a handler must be present
for either the whole namespace, or at least one synthetic
xattr in the namespace.
To be used by the nfs server code when being queried for extended
attributes support.
Cc: linux-fsdevel@vger.kernel.org
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
set/removexattr on an exported filesystem should break NFS delegations.
This is true in general, but also for the upcoming support for
RFC 8726 (NFSv4 extended attribute support). Make sure that they do.
Additionally, they need to grow a _locked variant, since callers might
call this with i_rwsem held (like the NFS server code).
Cc: stable@vger.kernel.org # v4.9+
Cc: linux-fsdevel@vger.kernel.org
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
For both pidfd and seccomp, the __user pointer is not used. Update
__receive_fd() to make writing to ufd optional via a NULL check. However,
for the receive_fd_user() wrapper, ufd is NULL checked so an -EFAULT
can be returned to avoid changing the SCM_RIGHTS interface behavior. Add
new wrapper receive_fd() for pidfd and seccomp that does not use the ufd
argument. For the new helper, the allocated fd needs to be returned on
success. Update the existing callers to handle it.
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Sargun Dhillon <sargun@sargun.me>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
We used to do this before 3453d5708b, but this was changed to better
handle the NFS4ERR_SEQ_MISORDERED error code. This commit fixed the slot
re-use case when the server doesn't receive the interrupted operation,
but if the server does receive the operation then it could still end up
replying to the client with mis-matched operations from the reply cache.
We can fix this by sending a SEQUENCE to the server while recovering from
a SEQ_MISORDERED error when we detect that we are in an interrupted slot
situation.
Fixes: 3453d5708b (NFSv4.1: Avoid false retries when RPC calls are interrupted)
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Make sure we specify the layout segment range when calculating the
mirror count. In theory, that number could depend on the range to
which we're writing.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Both nfs_pageio_reset_read_mds() and nfs_pageio_reset_write_mds()
do call pnfs_generic_pg_cleanup() for us.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If the application uses the AT_STATX_DONT_SYNC flag after doing readdir(),
then we should still mark the parent inode as seeing a readdirplus hit.
That ensures that we continue to use readdirplus in the 'ls -l' type
of workflow to do fast lookups of the dentries.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Pull io_uring fixes from Jens Axboe:
"Two late fixes again:
- Fix missing msg_name assignment in certain cases (Pavel)
- Correct a previous fix for full coverage (Pavel)"
* tag 'io_uring-5.8-2020-07-12' of git://git.kernel.dk/linux-block:
io_uring: fix not initialised work->flags
io_uring: fix missing msg_name assignment
Pull btrfs fixes from David Sterba:
"Two refcounting fixes and one prepartory patch for upcoming splice
cleanup:
- fix double put of block group with nodatacow
- fix missing block group put when remounting with discard=async
- explicitly set splice callback (no functional change), to ease
integrating splice cleanup patches"
* tag 'for-5.8-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: wire up iter_file_splice_write
btrfs: fix double put of block group with nocow
btrfs: discard: add missing put when grabbing block group from unused list
59960b9deb ("io_uring: fix lazy work init") tried to fix missing
io_req_init_async(), but left out work.flags and hash. Do it earlier.
Fixes: 7cdaf587de ("io_uring: avoid whole io_wq_work copy for requests completed inline")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
