The UDP source port number in RoCE v2 is used to create entropy for
network routers (ECMP), load balancers and 802.3ad link aggregation
switching that are not aware of RoCE IB headers. Considering that the IB
core has achieved a new interface to get a hashed value of it, the fixed
value of it in QPC and UD WQE in hns driver could be fixed and the port
number is to be set dynamically now.
For QPC of RC, the value could be hashed from flow_lable if the user pass
it in or from remote qpn and local qpn. For WQE of UD, it is set according
to fl or as a random value.
Link: https://lore.kernel.org/r/1598002289-8611-1-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
It should be considered an illegal operation if the ULP attempts to modify
a QP from another state to the current hardware state. Otherwise, the ULP
can modify some fields of QPC at any time. For example, for a QP in state
of RTS, modify it from RTR to RTS can change the PSN, which is always not
as expected.
Fixes: 9a4435375c ("IB/hns: Add driver files for hns RoCE driver")
Link: https://lore.kernel.org/r/1598353674-24270-1-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Driver crashes when destroy_qp is re-tried because of an error
returned. This is because the qp entry was removed from the qp list during
the first call.
Remove qp from the list only if destroy_qp returns success.
The driver will still trigger a WARN_ON due to the memory leaking, but at
least it isn't corrupting memory too.
Fixes: 8dae419f9e ("RDMA/bnxt_re: Refactor queue pair creation code")
Link: https://lore.kernel.org/r/1598292876-26529-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When computing the first psn entry, driver checks for page alignment. If
this address is not page aligned,it attempts to compute the offset in that
page for later use by using ALIGN macro. ALIGN macro does not return
offset bytes but the requested aligned address and hence cannot be used
directly to store as offset. Since driver was using the address itself
instead of offset, it resulted in invalid address when filling the psn
buffer.
Fixed driver to use PAGE_MASK macro to calculate the offset.
Fixes: fddcbbb02a ("RDMA/bnxt_re: Simplify obtaining queue entry from hw ring")
Link: https://lore.kernel.org/r/1598292876-26529-7-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Naresh Kumar PBS <nareshkumar.pbs@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
qp->id can be a value outside the max number of qp. Indexing the qp table
with the id can cause out of bounds crash. So changing the qp table
indexing by (qp->id % max_qp -1).
Allocating one extra entry for QP1. Some adapters create one more than the
max_qp requested to accommodate QP1. If the qp->id is 1, store the
inforamtion in the last entry of the qp table.
Fixes: f218d67ef0 ("RDMA/bnxt_re: Allow posting when QPs are in error")
Link: https://lore.kernel.org/r/1598292876-26529-4-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
If the pkey_table is not available (which is the case when RoCE is not
supported), the cited commit caused a regression where mlx4_devices
without RoCE are not created.
Fix this by returning a pkey table length of zero in procedure
eth_link_query_port() if the pkey-table length reported by the device is
zero.
Link: https://lore.kernel.org/r/20200824110229.1094376-1-leon@kernel.org
Cc: <stable@vger.kernel.org>
Fixes: 1901b91f99 ("IB/core: Fix potential NULL pointer dereference in pkey cache")
Fixes: fa417f7b52 ("IB/mlx4: Add support for IBoE")
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The alloc ucontext flow is always called with a valid udata, there's no
need to test whether it's NULL.
While at it, the 'udata->outlen' check is removed as well as we copy the
minimum between the size of the response and outlen, so in case of zero
outlen, zero bytes will be copied.
Link: https://lore.kernel.org/r/20200818110835.54299-1-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
A CM REJ packet with its reason equal to timeout is a special beast in the
sense that it doesn't have a Remote Communication ID nor does it have a
Remote Port GID.
Using CX-3 virtual functions, either from a bare-metal machine or
pass-through from a VM, MAD packets are proxied through the PF driver.
Since the VF drivers have separate name spaces for MAD Transaction Ids
(TIDs), the PF driver has to re-map the TIDs and keep the book keeping
in a cache.
This proxying doesn't not handle said REJ packets.
If the active side abandons its connection attempt after having sent a
REQ, it will send a REJ with the reason being timeout. This example can be
provoked by a simple user-verbs program, which ends up doing:
rdma_connect(cm_id, &conn_param);
rdma_destroy_id(cm_id);
using the async librdmacm API.
Having dynamic debug prints enabled in the mlx4_ib driver, we will then
see:
mlx4_ib_demux_cm_handler: Couldn't find an entry for pv_cm_id 0x0, attr_id 0x12
The solution is to introduce a radix-tree. When a REQ packet is received
and handled in mlx4_ib_demux_cm_handler(), we know the connecting peer's
para-virtual cm_id and the destination slave. We then insert an entry into
the tree with said information. We also schedule work to remove this entry
from the tree and free it, in order to avoid memory leak.
When a REJ packet with reason timeout is received, we can look up the
slave in the tree, and deliver the packet to the correct slave.
When a duplicate REQ packet is received, the entry is in the tree. In this
case, we adjust the delayed work in order to avoid a too premature
eviction of the entry.
When cleaning up, we simply traverse the tree and modify any delayed work
to use a zero delay. A subsequent flush of the system_wq will ensure all
entries being wiped out.
Fixes: 3cf69cc8db ("IB/mlx4: Add CM paravirtualization")
Link: https://lore.kernel.org/r/20200803061941.1139994-6-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The mlx4 driver will proxy MAD packets through the PF driver. A VM or an
instantiated VF will send its MAD packets to the PF driver using
loop-back. The PF driver will be informed by an interrupt, but defer the
handling and polling of CQEs to a worker thread running on an ordered
work-queue.
Consider the following scenario: the VMs will in short proximity in time,
for example due to a network event, send many MAD packets to the PF
driver. Lets say there are K VMs, each sending N packets.
The interrupt from the first VM will start the worker thread, which will
poll N CQEs. A common case here is where the PF driver will multiplex the
packets received from the VMs out on the wire QP.
But before the wire QP has returned a send CQE and associated interrupt,
the other K - 1 VMs have sent their N packets as well.
The PF driver has to multiplex K * N packets out on the wire QP. But the
send-queue on the wire QP has a finite capacity.
So, in this scenario, if K * N is larger than the send-queue capacity of
the wire QP, we will get MAD packets dropped on the floor with this
dynamic debug message:
mlx4_ib_multiplex_mad: failed sending GSI to wire on behalf of slave 2 (-11)
and this despite the fact that the wire send-queue could have capacity,
but the PF driver isn't aware, because the wire send CQEs have not yet
been polled.
We can also have a similar scenario inbound, with a wire recv-queue larger
than the tunnel QP's send-queue. If many remote peers send MAD packets to
the very same VM, the tunnel send-queue destined to the VM could allegedly
be construed to be full by the PF driver.
This starvation is fixed by introducing separate work queues for the wire
QPs vs. the tunnel QPs.
With this fix, using a dual ported HCA, 8 VFs instantiated, we could run
cmtime on each of the 18 interfaces towards a similar configured peer,
each cmtime instance with 800 QPs (all in all 14400 QPs) without a single
CM packet getting lost.
Fixes: 3cf69cc8db ("IB/mlx4: Add CM paravirtualization")
Link: https://lore.kernel.org/r/20200803061941.1139994-5-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Using CX-3 in virtualized mode, MAD packets are proxied through the PF
driver. The feed is N tunnel QPs, and what is received from the VFs is
multiplexed out on the wire QP. Since this is a many-to-one scenario, it
is better to have separate initialization parameters for the two usages.
The number of wire and tunnel bufs are yanked up to 2K and 512
respectively. With this set of parameters, a system consisting of eight
physical servers, each with eight VMs and 14 I/O servers (BM), can run
switch fail-over without seeing:
mlx4_ib_demux_mad: failed sending GSI to slave 3 via tunnel qp (-11)
or
mlx4_ib_multiplex_mad: failed sending GSI to wire on behalf of slave 2 (-11)
Fixes: 3cf69cc8db ("IB/mlx4: Add CM paravirtualization")
Link: https://lore.kernel.org/r/20200803061941.1139994-4-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Using CX-3 in virtualized mode, MAD packets are proxied through the PF
driver. However, the handling lacks support of the MRA (Message Receipt
Acknowledgment) packet. When having dynamic debug enabled, we see tons of:
mlx4_ib_multiplex_cm_handler: id{slave: 7, sl_cm_id: 0x8fcb45a0} is NULL! attr_id: 0x11
Fixes: 3cf69cc8db ("IB/mlx4: Add CM paravirtualization")
Link: https://lore.kernel.org/r/20200803061941.1139994-3-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add missing check for success after call to mlx4_ib_send_to_wire() in
mlx4_ib_multiplex_mad().
Amended the existing pr_debug() in mlx4_ib_multiplex_cm_handler() and
mlx4_ib_demux_cm_handler() with attr_id during a lookup failure.
Removed two noisy pr_debug() in mad.c
Fixes: 3cf69cc8db ("IB/mlx4: Add CM paravirtualization")
Link: https://lore.kernel.org/r/20200803061941.1139994-2-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The following message occurs when running an AI application with TID RDMA
enabled:
hfi1 0000:7f:00.0: hfi1_0: [QP74] hfi1_tid_timeout 4084
hfi1 0000:7f:00.0: hfi1_0: [QP70] hfi1_tid_timeout 4084
The issue happens when TID RDMA WRITE request is followed by an
IB_WR_RDMA_WRITE_WITH_IMM request, the latter could be completed first on
the responder side. As a result, no ACK packet for the latter could be
sent because the TID RDMA WRITE request is still being processed on the
responder side.
When the TID RDMA WRITE request is eventually completed, the requester
will wait for the IB_WR_RDMA_WRITE_WITH_IMM request to be acknowledged.
If the next request is another TID RDMA WRITE request, no TID RDMA WRITE
DATA packet could be sent because the preceding IB_WR_RDMA_WRITE_WITH_IMM
request is not completed yet.
Consequently the IB_WR_RDMA_WRITE_WITH_IMM will be retried but it will be
ignored on the responder side because the responder thinks it has already
been completed. Eventually the retry will be exhausted and the qp will be
put into error state on the requester side. On the responder side, the TID
resource timer will eventually expire because no TID RDMA WRITE DATA
packets will be received for the second TID RDMA WRITE request. There is
also risk of a write-after-write memory corruption due to the issue.
Fix by adding a requester side interlock to prevent any potential data
corruption and TID RDMA protocol error.
Fixes: a0b34f75ec ("IB/hfi1: Add interlock between a TID RDMA request and other requests")
Link: https://lore.kernel.org/r/20200811174931.191210.84093.stgit@awfm-01.aw.intel.com
Cc: <stable@vger.kernel.org> # 5.4.x+
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Driver shall add only the kernel qps to the flush list for clean up.
During async error events from the HW, driver is adding qps to this list
without checking if the qp is kernel qp or not.
Add a check to avoid user qp addition to the flush list.
Fixes: 942c9b6ca8 ("RDMA/bnxt_re: Avoid Hard lockup during error CQE processing")
Fixes: c50866e285 ("bnxt_re: fix the regression due to changes in alloc_pbl")
Link: https://lore.kernel.org/r/1596689148-4023-1-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Pull rdma updates from Jason Gunthorpe:
"A quiet cycle after the larger 5.8 effort. Substantially cleanup and
driver work with a few smaller features this time.
- Driver updates for hfi1, rxe, mlx5, hns, qedr, usnic, bnxt_re
- Removal of dead or redundant code across the drivers
- RAW resource tracker dumps to include a device specific data blob
for device objects to aide device debugging
- Further advance the IOCTL interface, remove the ability to turn it
off. Add QUERY_CONTEXT, QUERY_MR, and QUERY_PD commands
- Remove stubs related to devices with no pkey table
- A shared CQ scheme to allow multiple ULPs to share the CQ rings of
a device to give higher performance
- Several more static checker, syzkaller and rare crashers fixed"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (121 commits)
RDMA/mlx5: Fix flow destination setting for RDMA TX flow table
RDMA/rxe: Remove pkey table
RDMA/umem: Add a schedule point in ib_umem_get()
RDMA/hns: Fix the unneeded process when getting a general type of CQE error
RDMA/hns: Fix error during modify qp RTS2RTS
RDMA/hns: Delete unnecessary memset when allocating VF resource
RDMA/hns: Remove redundant parameters in set_rc_wqe()
RDMA/hns: Remove support for HIP08_A
RDMA/hns: Refactor hns_roce_v2_set_hem()
RDMA/hns: Remove redundant hardware opcode definitions
RDMA/netlink: Remove CAP_NET_RAW check when dump a raw QP
RDMA/include: Replace license text with SPDX tags
RDMA/rtrs: remove WQ_MEM_RECLAIM for rtrs_wq
RDMA/rtrs-clt: add an additional random 8 seconds before reconnecting
RDMA/cma: Execute rdma_cm destruction from a handler properly
RDMA/cma: Remove unneeded locking for req paths
RDMA/cma: Using the standard locking pattern when delivering the removal event
RDMA/cma: Simplify DEVICE_REMOVAL for internal_id
RDMA/efa: Add EFA 0xefa1 PCI ID
RDMA/efa: User/kernel compatibility handshake mechanism
...
Pull networking updates from David Miller:
1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan.
2) Support UDP segmentation in code TSO code, from Eric Dumazet.
3) Allow flashing different flash images in cxgb4 driver, from Vishal
Kulkarni.
4) Add drop frames counter and flow status to tc flower offloading,
from Po Liu.
5) Support n-tuple filters in cxgb4, from Vishal Kulkarni.
6) Various new indirect call avoidance, from Eric Dumazet and Brian
Vazquez.
7) Fix BPF verifier failures on 32-bit pointer arithmetic, from
Yonghong Song.
8) Support querying and setting hardware address of a port function via
devlink, use this in mlx5, from Parav Pandit.
9) Support hw ipsec offload on bonding slaves, from Jarod Wilson.
10) Switch qca8k driver over to phylink, from Jonathan McDowell.
11) In bpftool, show list of processes holding BPF FD references to
maps, programs, links, and btf objects. From Andrii Nakryiko.
12) Several conversions over to generic power management, from Vaibhav
Gupta.
13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry
Yakunin.
14) Various https url conversions, from Alexander A. Klimov.
15) Timestamping and PHC support for mscc PHY driver, from Antoine
Tenart.
16) Support bpf iterating over tcp and udp sockets, from Yonghong Song.
17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov.
18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan.
19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several
drivers. From Luc Van Oostenryck.
20) XDP support for xen-netfront, from Denis Kirjanov.
21) Support receive buffer autotuning in MPTCP, from Florian Westphal.
22) Support EF100 chip in sfc driver, from Edward Cree.
23) Add XDP support to mvpp2 driver, from Matteo Croce.
24) Support MPTCP in sock_diag, from Paolo Abeni.
25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic
infrastructure, from Jakub Kicinski.
26) Several pci_ --> dma_ API conversions, from Christophe JAILLET.
27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel.
28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki.
29) Refactor a lot of networking socket option handling code in order to
avoid set_fs() calls, from Christoph Hellwig.
30) Add rfc4884 support to icmp code, from Willem de Bruijn.
31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei.
32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin.
33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin.
34) Support TCP syncookies in MPTCP, from Flowian Westphal.
35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano
Brivio.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits)
net: thunderx: initialize VF's mailbox mutex before first usage
usb: hso: remove bogus check for EINPROGRESS
usb: hso: no complaint about kmalloc failure
hso: fix bailout in error case of probe
ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM
selftests/net: relax cpu affinity requirement in msg_zerocopy test
mptcp: be careful on subflow creation
selftests: rtnetlink: make kci_test_encap() return sub-test result
selftests: rtnetlink: correct the final return value for the test
net: dsa: sja1105: use detected device id instead of DT one on mismatch
tipc: set ub->ifindex for local ipv6 address
ipv6: add ipv6_dev_find()
net: openvswitch: silence suspicious RCU usage warning
Revert "vxlan: fix tos value before xmit"
ptp: only allow phase values lower than 1 period
farsync: switch from 'pci_' to 'dma_' API
wan: wanxl: switch from 'pci_' to 'dma_' API
hv_netvsc: do not use VF device if link is down
dpaa2-eth: Fix passing zero to 'PTR_ERR' warning
net: macb: Properly handle phylink on at91sam9x
...
For RDMA TX flow table, set destination type to be 'port' and prevent
creation of flows with TIR destination.
As RDMA TX is an egress flow table the rules on this flow table should
not forward traffic back to the NIC and should set the destination to be
the port.
Without the setting of this destination type flow rules on the RDMA TX
flow tables are not created as FW invokes a syndrome for undefined
destination for the rule.
Fixes: 24670b1a31 ("net/mlx5: Add support for RDMA TX steering")
Link: https://lore.kernel.org/r/20200803055849.14947-1-leon@kernel.org
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Scatter CQE feature relies on two flags MLX5_QP_FLAG_SCATTER_CQE and
MLX5_QP_FLAG_ALLOW_SCATTER_CQE, both of them can be provided without
relation to device capability.
Relax global validity check to allow MLX5_QP_FLAG_ALLOW_SCATTER_CQE QP
flag.
Existing user applications are failing on this new validity check.
Fixes: 90ecb37a75 ("RDMA/mlx5: Change scatter CQE flag to be set like other vendor flags")
Fixes: 37518fa49f ("RDMA/mlx5: Process all vendor flags in one place")
Link: https://lore.kernel.org/r/20200728120255.805733-1-leon@kernel.org
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
