kasan will report a BUG when run command 'insmod hns_roce_hw_v2.ko', the
calltrace is as follows:
==================================================================
BUG: KASAN: slab-out-of-bounds in hns_roce_v2_init_eq_table+0x1324/0x1948
[hns_roce_hw_v2]
Read of size 8 at addr ffff8020e7a10608 by task insmod/256
CPU: 0 PID: 256 Comm: insmod Tainted: G O 5.2.0-rc4 #1
Hardware name: Huawei D06 /D06, BIOS Hisilicon D06 UEFI RC0
Call trace:
dump_backtrace+0x0/0x1e8
show_stack+0x14/0x20
dump_stack+0xc4/0xfc
print_address_description+0x60/0x270
__kasan_report+0x164/0x1b8
kasan_report+0xc/0x18
__asan_load8+0x84/0xa8
hns_roce_v2_init_eq_table+0x1324/0x1948 [hns_roce_hw_v2]
hns_roce_init+0xf8/0xfe0 [hns_roce]
__hns_roce_hw_v2_init_instance+0x284/0x330 [hns_roce_hw_v2]
hns_roce_hw_v2_init_instance+0xd0/0x1b8 [hns_roce_hw_v2]
hclge_init_roce_client_instance+0x180/0x310 [hclge]
hclge_init_client_instance+0xcc/0x508 [hclge]
hnae3_init_client_instance.part.3+0x3c/0x80 [hnae3]
hnae3_register_client+0x134/0x1a8 [hnae3]
hns_roce_hw_v2_init+0x14/0x10000 [hns_roce_hw_v2]
do_one_initcall+0x9c/0x3e0
do_init_module+0xd4/0x2d8
load_module+0x3284/0x3690
__se_sys_init_module+0x274/0x308
__arm64_sys_init_module+0x40/0x50
el0_svc_handler+0xbc/0x210
el0_svc+0x8/0xc
Allocated by task 256:
__kasan_kmalloc.isra.0+0xd0/0x180
kasan_kmalloc+0xc/0x18
__kmalloc+0x16c/0x328
hns_roce_v2_init_eq_table+0x764/0x1948 [hns_roce_hw_v2]
hns_roce_init+0xf8/0xfe0 [hns_roce]
__hns_roce_hw_v2_init_instance+0x284/0x330 [hns_roce_hw_v2]
hns_roce_hw_v2_init_instance+0xd0/0x1b8 [hns_roce_hw_v2]
hclge_init_roce_client_instance+0x180/0x310 [hclge]
hclge_init_client_instance+0xcc/0x508 [hclge]
hnae3_init_client_instance.part.3+0x3c/0x80 [hnae3]
hnae3_register_client+0x134/0x1a8 [hnae3]
hns_roce_hw_v2_init+0x14/0x10000 [hns_roce_hw_v2]
do_one_initcall+0x9c/0x3e0
do_init_module+0xd4/0x2d8
load_module+0x3284/0x3690
__se_sys_init_module+0x274/0x308
__arm64_sys_init_module+0x40/0x50
el0_svc_handler+0xbc/0x210
el0_svc+0x8/0xc
Freed by task 0:
(stack is not available)
The buggy address belongs to the object at ffff8020e7a10600
which belongs to the cache kmalloc-128 of size 128
The buggy address is located 8 bytes inside of
128-byte region [ffff8020e7a10600, ffff8020e7a10680)
The buggy address belongs to the page:
page:ffff7fe00839e840 refcount:1 mapcount:0 mapping:ffff802340020200 index:0x0
flags: 0x5fffe00000000200(slab)
raw: 5fffe00000000200 dead000000000100 dead000000000200 ffff802340020200
raw: 0000000000000000 0000000081000100 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8020e7a10500: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc
ffff8020e7a10580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff8020e7a10600: 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff8020e7a10680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8020e7a10700: 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
Disabling lock debugging due to kernel taint
Fixes: a5073d6054 ("RDMA/hns: Add eq support of hip08")
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Link: https://lore.kernel.org/r/1565343666-73193-7-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
kasan will report a BUG when run command 'rmmod hns_roce_hw_v2', the calltrace
is as follows:
==================================================================
BUG: KASAN: slab-out-of-bounds in hns_roce_table_mhop_put+0x584/0x828
[hns_roce]
Read of size 8 at addr ffff802185e08300 by task rmmod/270
Call trace:
dump_backtrace+0x0/0x1e8
show_stack+0x14/0x20
dump_stack+0xc4/0xfc
print_address_description+0x60/0x270
__kasan_report+0x164/0x1b8
kasan_report+0xc/0x18
__asan_load8+0x84/0xa8
hns_roce_table_mhop_put+0x584/0x828 [hns_roce]
hns_roce_table_put+0x174/0x1a0 [hns_roce]
hns_roce_mr_free+0x124/0x210 [hns_roce]
hns_roce_dereg_mr+0x90/0xb8 [hns_roce]
ib_dealloc_pd_user+0x60/0xf0
ib_mad_port_close+0x128/0x1d8
ib_mad_remove_device+0x94/0x118
remove_client_context+0xa0/0xe0
disable_device+0xfc/0x1c0
__ib_unregister_device+0x60/0xe0
ib_unregister_device+0x24/0x38
hns_roce_exit+0x3c/0x138 [hns_roce]
__hns_roce_hw_v2_uninit_instance.isra.30+0x28/0x50 [hns_roce_hw_v2]
hns_roce_hw_v2_uninit_instance+0x44/0x60 [hns_roce_hw_v2]
hclge_uninit_client_instance+0x15c/0x238 [hclge]
hnae3_uninit_client_instance+0x84/0xa8 [hnae3]
hnae3_unregister_client+0x84/0x158 [hnae3]
hns_roce_hw_v2_exit+0x14/0x20 [hns_roce_hw_v2]
__arm64_sys_delete_module+0x20c/0x308
el0_svc_handler+0xbc/0x210
el0_svc+0x8/0xc
Allocated by task 255:
__kasan_kmalloc.isra.0+0xd0/0x180
kasan_kmalloc+0xc/0x18
__kmalloc+0x16c/0x328
hns_roce_init_hem_table+0x20c/0x428 [hns_roce]
hns_roce_init+0x214/0xfe0 [hns_roce]
__hns_roce_hw_v2_init_instance+0x284/0x330 [hns_roce_hw_v2]
hns_roce_hw_v2_init_instance+0xd0/0x1b8 [hns_roce_hw_v2]
hclge_init_roce_client_instance+0x180/0x310 [hclge]
hclge_init_client_instance+0xcc/0x508 [hclge]
hnae3_init_client_instance.part.3+0x3c/0x80 [hnae3]
hnae3_register_client+0x134/0x1a8 [hnae3]
0xffff200009c00014
do_one_initcall+0x9c/0x3e0
do_init_module+0xd4/0x2d8
load_module+0x3284/0x3690
__se_sys_init_module+0x274/0x308
__arm64_sys_init_module+0x40/0x50
el0_svc_handler+0xbc/0x210
el0_svc+0x8/0xc
Freed by task 0:
(stack is not available)
The buggy address belongs to the object at ffff802185e06300
which belongs to the cache kmalloc-8k of size 8192
The buggy address is located 0 bytes to the right of
8192-byte region [ffff802185e06300, ffff802185e08300)
The buggy address belongs to the page:
page:ffff7fe008617800 refcount:1 mapcount:0 mapping:ffff802340020e00 index:0x0
compound_mapcount: 0
flags: 0x5fffe00000010200(slab|head)
raw: 5fffe00000010200 dead000000000100 dead000000000200 ffff802340020e00
raw: 0000000000000000 00000000803e003e 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff802185e08200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff802185e08280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff802185e08300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff802185e08380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff802185e08400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================
Disabling lock debugging due to kernel taint
Fixes: a25d13cbe8 ("RDMA/hns: Add the interfaces to support multi hop addressing for the contexts in hip08")
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Link: https://lore.kernel.org/r/1565343666-73193-6-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
When exiting "for loop", the actual value of pi will be
increased by 1, which is compatible with the next calculation.
But when pi is equal to "ci + hr_cq-> ib_cq.cqe", the "break"
was called and the pi is actual value, it will lead one cqe
still existing, so the "==" should be modify to ">".
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Link: https://lore.kernel.org/r/1565343666-73193-5-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
Merging tip of mlx5-next in order to get changes related to adding
XRQ support to the DEVX interface needed prior to the following two
patches.
Signed-off-by: Doug Ledford <dledford@redhat.com>
Once implicit MR is being called to be released by
ib_umem_notifier_release() its leaves were marked as "dying".
However, when dereg_mr()->mlx5_ib_free_implicit_mr()->mr_leaf_free() is
called, it skips running the mr_leaf_free_action (i.e. umem_odp->work)
when those leaves were marked as "dying".
As such ib_umem_release() for the leaves won't be called and their MRs
will be leaked as well.
When an application exits/killed without calling dereg_mr we might hit the
above flow.
This fatal scenario is reported by WARN_ON() upon
mlx5_ib_dealloc_ucontext() as ibcontext->per_mm_list is not empty, the
call trace can be seen below.
Originally the "dying" mark as part of ib_umem_notifier_release() was
introduced to prevent pagefault_mr() from returning a success response
once this happened. However, we already have today the completion
mechanism so no need for that in those flows any more. Even in case a
success response will be returned the firmware will not find the pages and
an error will be returned in the following call as a released mm will
cause ib_umem_odp_map_dma_pages() to permanently fail mmget_not_zero().
Fix the above issue by dropping the "dying" from the above flows. The
other flows that are using "dying" are still needed it for their
synchronization purposes.
WARNING: CPU: 1 PID: 7218 at
drivers/infiniband/hw/mlx5/main.c:2004
mlx5_ib_dealloc_ucontext+0x84/0x90 [mlx5_ib]
CPU: 1 PID: 7218 Comm: ibv_rc_pingpong Tainted: G E
5.2.0-rc6+ #13
Call Trace:
uverbs_destroy_ufile_hw+0xb5/0x120 [ib_uverbs]
ib_uverbs_close+0x1f/0x80 [ib_uverbs]
__fput+0xbe/0x250
task_work_run+0x88/0xa0
do_exit+0x2cb/0xc30
? __fput+0x14b/0x250
do_group_exit+0x39/0xb0
get_signal+0x191/0x920
? _raw_spin_unlock_bh+0xa/0x20
? inet_csk_accept+0x229/0x2f0
do_signal+0x36/0x5e0
? put_unused_fd+0x5b/0x70
? __sys_accept4+0x1a6/0x1e0
? inet_hash+0x35/0x40
? release_sock+0x43/0x90
? _raw_spin_unlock_bh+0xa/0x20
? inet_listen+0x9f/0x120
exit_to_usermode_loop+0x5c/0xc6
do_syscall_64+0x182/0x1b0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: 81713d3788 ("IB/mlx5: Add implicit MR support")
Link: https://lore.kernel.org/r/20190805083010.21777-1-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reference counters are preferred to use refcount_t instead of
atomic_t.
This is because the implementation of refcount_t can prevent
overflows and detect possible use-after-free.
So convert atomic_t ref counters to refcount_t.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
UAR in CQ is not used and generates the following compilation
warning, clean the code by removing uar assignment.
drivers/infiniband/hw/hns/hns_roce_cq.c: In function _create_user_cq_:
drivers/infiniband/hw/hns/hns_roce_cq.c:305:27: warning: parameter _uar_ set but not used [-Wunused-but-set-parameter]
305 | struct hns_roce_uar *uar,
| ~~~~~~~~~~~~~~~~~~~~~^~~
Fixes: 4f8f0d5e33 ("RDMA/hns: Package the flow of creating cq")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190801114827.24263-1-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
The "MLX5_CMD_OP_QUERY_LAG" is one of the DEVX general commands, add it.
Fixes: 8aa8c95ce4 ("IB/mlx5: Add support for DEVX general command")
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/infiniband/hw/hns/hns_roce_hw_v2.c: In function hns_roce_v2_cleanup_eq_table:
drivers/infiniband/hw/hns/hns_roce_hw_v2.c:5920:6:
warning: variable irq_num set but not used [-Wunused-but-set-variable]
It is not used since
commit 33db6f9484 ("RDMA/hns: Refactor eq table init for hip08")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190731073748.17664-1-yuehaibing@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
We don't need dev_err() messages when platform_get_irq() fails now that
platform_get_irq() prints an error message itself when something goes
wrong. Let's remove these prints with a simple semantic patch.
// <smpl>
@@
expression ret;
struct platform_device *E;
@@
ret =
(
platform_get_irq(E, ...)
|
platform_get_irq_byname(E, ...)
);
if ( \( ret < 0 \| ret <= 0 \) )
{
(
-if (ret != -EPROBE_DEFER)
-{ ...
-dev_err(...);
-... }
|
...
-dev_err(...);
)
...
}
// </smpl>
While we're here, remove braces on if statements that only have one
statement (manually).
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20190730181557.90391-21-swboyd@chromium.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
Use accessor functions for skb fragment's page_offset instead
of direct references, in preparation for bvec conversion.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
