[Why]
Changes that are fast don't require updating DLG parameters making
this call unnecessary. Considering this is an expensive call it should
not be done on every flip.
DML touches clocks, p-state support, DLG params and a few other DC
internal flags and these aren't expected during fast. A hang has been
reported with this change when called on every flip which suggests that
modifying these fields is not recommended behavior on fast updates.
[How]
Guard the validation to only happen if update type isn't FAST.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1191
Fixes: a24eaa5c51 ("drm/amd/display: Revalidate bandwidth before commiting DC updates")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Rearrange the allocation of the mm_struct registration to avoid
allocating underneath the i915->mm_lock, so that we avoid tainting the
lock (and in turn many other locks that may be held as i915->mm_lock is
taken, and those locks we may want on the free [shrinker] paths). In
doing so, we convert the lookup to be RCU protected by courtesy of
converting the free-worker to be an rcu_work.
v2: Remember to use hash_rcu variants to protect the list iteration from
concurrent add/del.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200619194038.5088-1-chris@chris-wilson.co.uk
The default fbc1 compression interval we use is 500 frames. That
translates to over 8 seconds typically. That's rather excessive
so let's drop it to 1 second.
The hardware will not attempt recompression unless at least one
line has been modified, so a shorter compression interval should
not cause extra bandwidth use in the purely idle scenario. Of
course in the mostly idle case we are possibly going to recompress
a bit more.
Should really try to find some kind of sweet spot to minimize
the energy usage...
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429101034.8208-11-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
The current fence_y_offset calculation is broken. I think it more or
less used to do the right thing, but then I changed the plane code
to put the final x/y source offsets back into the src rectangle so
now it's just subtraacting the same value from itself. The code would
never have worked if we allowed the framebuffer to have a non-zero
offset.
Let's do this in a better way by just calculating the fence_y_offset
from the final plane surface offset. Note that we don't align the
plane surface address to fence rows so with horizontal panning there's
often a horizontal offset from the fence start to the surface address
as well. We have no way to tell the hardware about that so we just
ignore it. Based on some quick tests the invlidation still happens
correctly. I presume due to the invalidation nuking at least the full
line (or a segment of multiple lines).
Fixes: 54d4d719fa ("drm/i915: Overcome display engine stride limits via GTT remapping")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429101034.8208-4-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Added epoch counter checking to intel_encoder_hotplug
in order to be able process all the connector changes,
besides connection status. Also now any change in connector
would result in epoch counter change, so no multiple checks
are needed.
v2: Renamed change counter to epoch counter. Fixed type name.
v3: Fixed rebase conflict
v4: Remove duplicate drm_edid_equal checks from hdmi and dp,
lets use only once edid property is getting updated and
increment epoch counter from there.
Also lets now call drm_connector_update_edid_property
right after we get edid always to make sure there is a
unified way to handle edid change, without having to
change tons of source code as currently
drm_connector_update_edid_property is called only in
certain cases like reprobing and not right after edid is
actually updated.
v5: Fixed const modifiers, removed blank line
v6: Removed drm specific part from this patch, leaving only
i915 specific changes here.
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200630002700.5451-4-kunal1.joshi@intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
This counter will be used by drm_helper_probe_detect caller to determine
if anything had changed(including edid, connection status and etc).
Hardware specific driver detect hooks are responsible for updating this
counter when some change is detected to notify the drm part,
which can trigger for example hotplug event.
Also now call drm_connector_update_edid_property
right after we get edid always to make sure there is a
unified way to handle edid change, without having to
change tons of source code as currently
drm_connector_update_edid_property is called only in
certain cases like reprobing and not right after edid is
actually updated.
v2: Added documentation for the new counter. Rename change_counter to
epoch_counter.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105540
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200630002700.5451-3-kunal1.joshi@intel.com
Currently there is no null check for a failed memory allocation
on the dsb object and without this a null pointer dereference
error can occur. Fix this by adding a null check.
Note: added a drm_err message in keeping with the error message style
in the function.
Addresses-Coverity: ("Dereference null return")
Fixes: afeda4f3b1 ("drm/i915/dsb: Pre allocate and late cleanup of cmd buffer")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200616114221.73971-1-colin.king@canonical.com
drm-misc-next for v5.9:
Cross-subsystem Changes:
- Improve dma-buf docs.
Core Changes:
- Add NV15, Q410, Q401 yuv formats.
- Add uncompressed AFBC modifier.
- Add DP helepr for reading Ignore MSA from DPCD.
- Add missing panel type for some panels
- Optimize drm/mm hole handling.
- Constify connector to infoframe functions.
- Add debugfs for VRR monitor range.
Driver Changes:
- Assorted small bugfixes in panfrost, malidp, panel/otm8009a.
- Convert tfp410 dt bindings to yaml, and rework time calculations.
- Add support for a few more simple panels.
- Cleanups and optimizations for ast.
- Allow adv7511 and simple-bridge to be used without connector creation.
- Cleanups to dw-hdmi function prototypes.
- Remove enabled bool from tiny/repaper and mipi-dbi, atomic handles it.
- Remove unused header file from dw-mipi-dsi
- Begin removing ttm_bo->offset.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b1e53620-7937-895c-bfcf-ed208be59c7c@linux.intel.com
The linetime watermark is a 9 bit value, which gives us
a maximum linetime of just below 64 usec. If the linetime
exceeds that value we currently just discard the high bits
and program the rest into the register, which angers the
state checker.
To avoid that let's just clamp the value to the max. I believe
it should be perfectly fine to program a smaller linetime wm
than strictly required, just means the hardware may fetch data
sooner than strictly needed. We are further reassured by the
fact that with DRRS the spec tells us to program the smaller
of the two linetimes corresponding to the two refresh rates.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200625200003.12436-1-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Instead of signaling failure by setting the node pointer to
NULL do so by returning -ENOSPC.
v2: add memset() to make sure that mem is always initialized.
v3: drop memset() only set mm_node = NULL, move mm_node init in amdgpu
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patchwork.freedesktop.org/patch/373181/
Some conflicts with ttm_bo->offset removal, but drm-misc-next needs updating to v5.8.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Alexandre Oliva has recently removed these files from Linux Libre
with concerns that the sources weren't available.
The sources are available on IGT repository, and only open source
tools are used to generate the {ivb,hsw}_clear_kernel.c files.
However, the remaining concern from Alexandre Oliva was around
GPL license and the source not been present when distributing
the code.
So, it looks like 2 alternatives are possible, the use of
linux-firmware.git repository to store the blob or making sure
that the source is also present in our tree. Since the goal
is to limit the i915 firmware to only the micro-controller blobs
let's make sure that we do include the asm sources here in our tree.
Btw, I tried to have some diligence here and make sure that the
asms that these commits are adding are truly the source for
the mentioned files:
igt$ ./scripts/generate_clear_kernel.sh -g ivb \
-m ~/mesa/build/src/intel/tools/i965_asm
Output file not specified - using default file "ivb-cb_assembled"
Generating gen7 CB Kernel assembled file "ivb_clear_kernel.c"
for i915 driver...
igt$ diff ~/i915/drm-tip/drivers/gpu/drm/i915/gt/ivb_clear_kernel.c \
ivb_clear_kernel.c
< * Generated by: IGT Gpu Tools on Fri 21 Feb 2020 05:29:32 AM UTC
> * Generated by: IGT Gpu Tools on Mon 08 Jun 2020 10:00:54 AM PDT
61c61
< };
> };
\ No newline at end of file
igt$ ./scripts/generate_clear_kernel.sh -g hsw \
-m ~/mesa/build/src/intel/tools/i965_asm
Output file not specified - using default file "hsw-cb_assembled"
Generating gen7.5 CB Kernel assembled file "hsw_clear_kernel.c"
for i915 driver...
igt$ diff ~/i915/drm-tip/drivers/gpu/drm/i915/gt/hsw_clear_kernel.c \
hsw_clear_kernel.c
5c5
< * Generated by: IGT Gpu Tools on Fri 21 Feb 2020 05:30:13 AM UTC
> * Generated by: IGT Gpu Tools on Mon 08 Jun 2020 10:01:42 AM PDT
61c61
< };
> };
\ No newline at end of file
Used IGT and Mesa master repositories from Fri Jun 5 2020)
IGT: 53e8c878a6fb ("tests/kms_chamelium: Force reprobe after replugging
the connector")
Mesa: 5d13c7477eb1 ("radv: set keep_statistic_info with
RADV_DEBUG=shaderstats")
Mesa built with: meson build -D platforms=drm,x11 -D dri-drivers=i965 \
-D gallium-drivers=iris -D prefix=/usr \
-D libdir=/usr/lib64/ -Dtools=intel \
-Dkulkan-drivers=intel && ninja -C build
v2: Header clean-up and include build instructions in a readme (Chris)
Modified commit message to respect check-patch
Reference: http://www.fsfla.org/pipermail/linux-libre/2020-June/003374.html
Reference: http://www.fsfla.org/pipermail/linux-libre/2020-June/003375.html
Fixes: 47f8253d2b ("drm/i915/gen7: Clear all EU/L3 residual contexts")
Cc: <stable@vger.kernel.org> # v5.7+
Cc: Alexandre Oliva <lxoliva@fsfla.org>
Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200610201807.191440-1-rodrigo.vivi@intel.com
(cherry picked from commit 5a7eeb8ba1)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
in mic_pre_enable, pm_runtime_get_sync is called which
increments the counter even in case of failure, leading to incorrect
ref count. In case of failure, decrement the ref count before returning.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Propagate the proper error codes from the called functions instead of
unconditionally returning 0.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Merge conflict so merged it manually.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
platform_get_irq() will call dev_err() itself on failure,
so there is no need for the driver to also do this.
This is detected by coccinelle.
Signed-off-by: Tamseel Shams <m.shams@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
