arm64: dtc: amlogic updates for v5.10
- new boards: libretch s905x cc v2, Hardkernel ODROID-N2+
- vim3: sound updates
* tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
arm64: dts: meson: initial support for aml-s905x-cc v2
dt-bindings: arm: amlogic: add support for libretch s905x cc v2
arm64: dts: meson: add support for the ODROID-N2+
dt-bindings: arm: amlogic: add support for the ODROID-N2+
arm64: dts: meson: convert ODROID-N2 to dtsi
arm64: dts: meson: vim3l: remove sound card definition
arm64: dts: meson: vim3: make sound card common to all variants
arm64: dts: meson: vim3: correct led polarity
Link: https://lore.kernel.org/r/7h3636kjxd.fsf@baylibre.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Qualcomm ARM64 DT updates for v5.10
Cleanup, refactor and modernize MSM8916 by sorting nodes, moving device
and platform specific parts to their respective files, add and use
labels for reference nodes and use IRQ defines. Migrate TCSR mutex off
the depricated binding, add resin node for PM8916.
Add LPASS clock controller for SC7180. Fix the LLCC reg, increase
interconnect-cells, drop flags on MDSS irqs. Add interconnects for
display, eMMC and SD-card, specify 'sustainable_power' for CPU thermal
zones, improve pinconf states related to UART and Bluetooth. Add new DT
for Lazor and Trogdor.
Increase #interconnect-cells for SDM845 to allow tags, add OPP tables
and power-domains for Venus and interconnects for display. Fix the ports
on the HDMI nodes for DB845c and add DT for the Xiaomi Poco F1.
Add interconnect providers, fix up primary USB's clock and use
dt-binding defines for GPU clocks on SM8150.
Add interconnect providers, CPUfreq, thermal configuration and missing
uarts for SM8250. Fix up naming of debug uart, add always-on supply
clock to gcc, fix up the sleep clock rate and define OPP tables for all
QUP devices. Then add a new DeviceTree for the QRB5165 RB5 board.
Enable watchdog on IPQ8074 and use the appropriate compatible for the
PMU node. Enable DVFS support for IPQ6018.
Finally correct the spelling of "interrupts" in MSM8992 uart node, fix
missing # in PM660 #interrupt-cells, add second VFE power-domain to
camss in MSM8996 and sort the Makefile.
* tag 'qcom-arm64-for-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (75 commits)
arm64: dts: qcom: sm8250: Add thermal zones and throttling support
arm64: dts: qcom: sm8250: Add cpufreq hw node
arm64: dts: qcom: sdm845: Add interconnects property for display
arm64: dts: qcom: sm8250: Add EPSS L3 interconnect provider
arm64: dts: qcom: sm8150: Add OSM L3 interconnect provider
arm64: dts: qcom: sm8250: add interconnect nodes
arm64: dts: qcom: sm8150: add interconnect nodes
arm64: dts: qcom: sc7180: Increase the number of interconnect cells
arm64: dts: qcom: sdm845: Increase the number of interconnect cells
arm64: dts: qcom: Makefile: Sort lines
arm64: dts: qcom: pm8916: Sort nodes
arm64: dts: qcom: msm8916: Sort nodes
arm64: dts: qcom: msm8916: Pad addresses
arm64: dts: qcom: msm8916: Rename "x-smp2p" to "smp2p-x"
arm64: dts: qcom: msm8916: Use more generic node names
arm64: dts: qcom: msm8916: Add MSM8916-specific compatibles to SCM/MSS
arm64: dts: qcom: msm8916: Minor style fixes
arm64: dts: qcom: msm8916: Drop qcom,tcsr-mutex syscon
arm64: dts: qcom: msm8916: Use IRQ defines, add IRQ types
arm64: dts: qcom: msm8916: Fix MDP/DSI interrupts
...
Link: https://lore.kernel.org/r/20200924040607.180039-1-bjorn.andersson@linaro.org
Signed-off-by: Olof Johansson <olof@lixom.net>
New boards NanoPi R2S, A95X-Z2 and more Rock-Pi4 variants.
Khadas-edge additions and a some fixes.
* tag 'v5.10-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: add ir-receiver node to rk3399-khadas-edge
arm64: dts: rockchip: add spiflash node to rk3399-khadas-edge
arm64: dts: rockchip: Add support for FriendlyARM NanoPi R2S
dt-bindings: Add doc for FriendlyARM NanoPi R2S
arm64: dts: rockchip: replace status value "ok" by "okay"
arm64: dts: rockchip: fix cpu-supply for rk3328-evb
arm64: dts: rockchip: add rk3318 A95X Z2 board
dt-bindings: arm: rockchip: add Zkmagic A95X Z2 description
dt-bindings: Add vendor prefix for Shenzhen Zkmagic Technology Co., Ltd.
arm64: dts: rockchip: Add Radxa ROCK Pi 4C support
arm64: dts: rockchip: Add Radxa ROCK Pi 4B support
arm64: dts: rockchip: Mark rock-pi-4 as rock-pi-4a dts
dt-bindings: arm: rockchip: Update ROCKPi 4 binding
arm64: dts: rockchip: change spdif fallback compatible on rk3308
arm64: dts: rockchip: Fix power routing to support POE on rk3399-roc-pc
Link: https://lore.kernel.org/r/16010805.MhVyP8KKtY@diego
Signed-off-by: Olof Johansson <olof@lixom.net>
i.MX arm64 device tree change for 5.10:
- New board/device support: Librem 5 phone, i.MX8MM DDR4 EVK, Variscite
VAR-SOM-MX8MN SoM and Symphony board.
- Add NWL MIPI DSI controller support for i.MX8MQ.
- Several series from Krzysztof Kozlowski to clean and fix up i.MX8
based device trees according to DT schema.
- A series from Michael Walle to add sl28cpld support for Kontron sl28
device based on LS1028A.
- Add two parameters for Samsung picophy tuning on imx8mm-evk and
imx8mn-evk boards.
- Add more thermal zones for Layerscape SoCs.
- Various random update and minor fix-ups.
* tag 'imx-dt64-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (71 commits)
arm64: dts: imx8mq-librem5: correct GPIO hog property
arm64: dts: imx8mm-var-som-symphony: Drop wake-up source from RTC
arm64: dts: imx8mq: correct interrupt flags
arm64: dts: imx8mn: correct interrupt flags
arm64: dts: imx8mm: correct interrupt flags
arm64: dts: imx8mm-var-som-symphony: fix ptn5150 interrupts
arm64: dts: layerscape: correct watchdog clocks for LS1088A
arm64: dts: freescale: sl28: enable fan support
arm64: dts: freescale: sl28: enable LED support
arm64: dts: freescale: sl28: map GPIOs to input events
arm64: dts: freescale: sl28: enable sl28cpld
arm64: dts: imx8mq-evk: Add MIPI DSI support
arm64: dts: layerscape: Add label to pcie nodes
arm64: dts: imx8mn-var-som-symphony: Add Variscite Symphony board with VAR-SOM-MX8MN
arm64: dts: imx8mn-var-som: Add Variscite VAR-SOM-MX8MN System on Module
arm64: dts: imx8mn-ddr4-evk: Remove unneeded PMIC pin configuration
arm64: dts: imx8mm-var-som-symphony: Adjust ethernet pin configuration
arm64: dts: imx8mm-var-som-symphony: Remove unneeded i2c3 properties
arm64: dts: imx8mm-var-som-symphony: Drop unused gpioledgrp
arm64: dts: imx8mq-librem5: Add interrupt-names to ti,tps6598x
...
Link: https://lore.kernel.org/r/20200923073009.23678-5-shawnguo@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
i.MX arm32 device tree change for 5.10:
- New board/device support: Tolino Shine 2 HD, TQMa6 SoM, Y Soft IOTA
Orion board.
- update GPMI NAND node name to nand-controller for aligning with DT
schema.
- Remove the legacy fsl,spi-num-chipselects property from a few board.
- A series to update imx6q-logicpd support, using GPIO chipselect,
adding board compatible string, and enabling DTB build for the board.
- Complete RNG device node in i.MX6SL device tree, and add RNG node for
i.MX6SLL and i.MX6ULL.
- Correct interrupt flags for imx6qdl-gw5xxx boards.
- Add missing enet_out clock for i.MX6Q/DL Ethernet device.
- Enable PCIe support for imx6qp-sabreauto board.
- A series from Shengjiu Wang to add audio sound card for imx7d-sdb and
imx6sll-evk board, add headphone detection for sound card on a few NXP
development boards.
- A couple of minor fix-ups on i.MX25 pin functions.
- Some random update on various boards.
* tag 'imx-dt-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (37 commits)
ARM: dts: imx6qdl-gw5xxx: correct interrupt flags
ARM: dts: imx6q-logicpd: Use GPIO chipselect
ARM: dts: imx: Add an entry for imx6q-logicpd.dtb
ARM: dts: imx6q-logicpd: Add a specific board compatible string
ARM: dts: imx6q: align GPIO hog names with dtschema
ARM: dts: imx6qdl-tqma6: fix LM75 compatible string
ARM: dts: imx6qdl-tqma6: remove obsolete fsl,spi-num-chipselects
ARM: dts: imx6qdl-tqma6: fix indentation
ARM: dts: imx28-m28: Align GPMI NAND node name with schema
ARM: dts: imx6qdl: add enet_out clk support
ARM: dts: imx6qdl: move iomuxc compatible assignment out of root node
ARM: dts: vf: Fix PCA95xx GPIO expander properties on ZII CFU1
ARM: dts: imx: add devicetree for Tolino Shine 2 HD
ARM: dts: imx6qdl-gw553x: Remove unneeded #address-cells/#size-cells
ARM: dts: imx6sll-evk: Add audio sound card node
ARM: dts: imx6sl-evk: Add headphone detection for sound card
ARM: dts: imx6sx-sdb: Add headphone detection for sound card
ARM: dts: imx6q-kontron-samx6i: Remove old fsl,spi-num-chipselects
ARM: dts: imx: Fix the SPI chipselect polarity
ARM: dts: imx25-pinfunc: Fix GPT function names
...
Link: https://lore.kernel.org/r/20200923073009.23678-4-shawnguo@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
Qualcomm ARM64 DT fixes for v5.9
This fixes the OPP table for SDM845 QUP devices to bring back
Bluetooth support, disables SMMU on SDM630 to make the devices boot
again, disables the eMMC controller on Kitakami to prevent permanent
damage and fixes a typo in the pm660.
* tag 'qcom-arm64-fixes-for-5.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: pm660: Fix missing pound sign in interrupt-cells
arm64: dts: qcom: kitakami: Temporarily disable SDHCI1
arm64: dts: sdm630: Temporarily disable SMMUs by default
arm64: dts: sdm845: Fixup OPP table for all qup devices
Link: https://lore.kernel.org/r/20200922000521.39621-1-bjorn.andersson@linaro.org
Signed-off-by: Olof Johansson <olof@lixom.net>
Tag fix up for TI serdes mux definition introduced in 5.9
* tag 'ti-k3-dt-fixes-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux: (637 commits)
arm64: dts: ti: k3-j721e: Rename mux header and update macro names
Linux 5.9-rc3
genirq/matrix: Deal with the sillyness of for_each_cpu() on UP
fsldma: fix very broken 32-bit ppc ioread64 functionality
kernel.h: Silence sparse warning in lower_32_bits
cifs: fix check of tcon dfs in smb1
KVM: arm64: Set HCR_EL2.PTW to prevent AT taking synchronous exception
KVM: arm64: Survive synchronous exceptions caused by AT instructions
KVM: arm64: Add kvm_extable for vaxorcism code
arm64: vdso32: make vdso32 install conditional
arm64: use a common .arch preamble for inline assembly
mfd: mfd-core: Ensure disabled devices are ignored without error
usb: storage: Add unusual_uas entry for Sony PSZ drives
md/raid5: make sure stripe_size as power of two
powerpc/32s: Disable VMAP stack which CONFIG_ADB_PMU
io_uring: don't bounce block based -EAGAIN retry off task_work
io_uring: fix IOPOLL -EAGAIN retries
arm64/cpuinfo: Remove unnecessary fallthrough annotation
media: dib0700: Fix identation issue in dib8096_set_param_override()
hwmon: (gsc-hwmon) Scale temperature to millidegrees
...
Link: https://lore.kernel.org/r/20200921125402.mtwypblhb45a6ssh@akan
Signed-off-by: Olof Johansson <olof@lixom.net>
Samsung DTS ARM changes for v5.10, part two
1. Further cleanup of DTS with dtschema: s5pv210, s3c6410 and s3c24xx.
This fixes many minor dtschema violations, adds few missing
functionalities (like clock for RTC) and improves the code
maintainability in few places. Except the RTC clock, this should not
have visible impact.
2. Fix few remaining Exynos dtschema violations.
* tag 'samsung-dt-5.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (36 commits)
ARM: dts: s5pv210: replace deprecated "gpios" i2c-gpio property in Goni
ARM: dts: s5pv210: replace deprecated "gpios" i2c-gpio property in Aquila
ARM: dts: s5pv210: move fixed regulators under root node in Goni
ARM: dts: s5pv210: move fixed regulators under root node in Aquila
ARM: dts: exynos: Align OPP table name with dt-schema
ARM: dts: exynos: move assigned-clock* properties to i2s0 node in Odroid XU4
ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid
ARM: dts: exynos: add input clock to CMU in Exynos3250
ARM: dts: s3c24xx: move fixed clocks under root node in SMDK2416
ARM: dts: s3c24xx: add address to CPU node
ARM: dts: s3c24xx: align PWM/timer node name with dtschema
ARM: dts: s3c24xx: override nodes by label
ARM: dts: s3c24xx: fix number of PWM cells
ARM: dts: s3c6410: remove additional CPU compatible
ARM: dts: s3c6410: align node SROM bus node name with dtschema in SMDK6410
ARM: dts: s3c6410: align node SROM bus node name with dtschema in Mini6410
ARM: dts: s3c6410: move fixed clocks under root node in SMDK6410
ARM: dts: s3c6410: move fixed clocks under root node in Mini6410
ARM: dts: s5pv210: correct ethernet unit address in SMDKV210
ARM: dts: s5pv210: align SPI GPIO node name with dtschema in Aries
...
Link: https://lore.kernel.org/r/20200920160705.9651-3-krzk@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
arm64: tegra: Changes for v5.10-rc1
This set of changes fixes some minor issues in existing device trees and
adds ID EEPROMs on the Jetson Xavier NX. All ID EEPROMs are now labelled
to allow them to be detected by software.
It also adds support for the Tegra234 VDK board, which is a pre-silicon
platform for the upcoming Orin SoC.
* tag 'tegra-for-5.10-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Initial Tegra234 VDK support
arm64: tegra: Populate EEPROMs for Jetson Xavier NX
arm64: tegra: Add label properties for EEPROMs
arm64: tegra: Add DT binding for AHUB components
arm64: tegra: Enable ACONNECT, ADMA and AGIC on Jetson Nano
arm64: tegra: Properly size register regions for GPU on Tegra194
arm64: tegra: Use valid PWM period for VDD_GPU on Tegra210
arm64: tegra: Describe display controller outputs for Tegra210
arm64: tegra: Disable SD card write-protection on Jetson Nano
arm64: tegra: Add VBUS supply for micro USB port on Jetson Nano
arm64: tegra: Wire up pinctrl states for all DPAUX controllers
arm64: tegra: Add ID EEPROMs on Jetson AGX Xavier
Link: https://lore.kernel.org/r/20200918150303.3938852-5-thierry.reding@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Renesas ARM DT updates for v5.10 (take two)
- PCIe endpoint support for the RZ/G2H SoC,
- SATA support for the HopeRun HiHope RZ/G2H board,
- Increase support (CAN, LED, SPI NOR, VIN, VSP) for the RZ/G1H SoC on
the iWave Qseven board (G21D), and its camera add-on board,
- Initial support for the R-Car V3U SoC on the Falcon CPU and BreakOut
boards,
- HDMI display and sound support for the R-Car M3-W+ SoC on the
Salvator-XS board,
- Digital Radio Interface (DRIF) support for the R-Car E3 SoC,
- Minor fixes and cleanups.
* tag 'renesas-arm-dt-for-v5.10-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (24 commits)
arm64: dts: renesas: r8a774c0: Fix MSIOF1 DMA channels
arm64: dts: renesas: r8a77990: Fix MSIOF1 DMA channels
arm64: dts: renesas: r8a77990: Add DRIF support
ARM: dts: r8a7742-iwg21d-q7-dbcm-ca: Add can0 support to camera DB
ARM: dts: r8a7742: Add VSP support
arm64: dts: renesas: Drop superfluous pin configuration containers
arm64: dts: renesas: r8a77961: salvator-xs: Add HDMI Sound support
arm64: dts: renesas: r8a77961: salvator-xs: Add HDMI Display support
arm64: dts: renesas: r8a77961: Add HDMI device nodes
arm64: dts: renesas: r8a77961: Add DU device nodes
arm64: dts: renesas: r8a77961: Add VSP device nodes
arm64: dts: renesas: r8a77961: Add FCP device nodes
arm64: dts: renesas: Fix pin controller node names
ARM: dts: renesas: Fix pin controller node names
arm64: dts: renesas: Add Renesas Falcon boards support
arm64: dts: renesas: Add Renesas R8A779A0 SoC support
ARM: dts: r8a7742-iwg21d-q7: Enable SD2 LED indication
ARM: dts: r8a7742-iwg21d-q7: Add can1 support to carrier board
ARM: dts: r8a7742-iwg21d-q7: Add SPI NOR support
ARM: dts: r8a7742: Add VIN DT nodes
...
Link: https://lore.kernel.org/r/20200918124800.15555-2-geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
The Synopsys DesignWare APB GPIO controller port must have gpio-cells
property, as pointed by dtschema:
arch/arm64/boot/dts/apm/apm-mustang.dt.yaml: gpio@1c024000: gpio-controller@0: '#gpio-cells' is a required property
Link: https://lore.kernel.org/r/20200917165040.22908-2-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
The Synopsys DesignWare APB GPIO controller driver does not parse
reg-io-width and dtschema does not allow it so drop it to fix dtschema
warnings like:
arch/arm64/boot/dts/apm/apm-mustang.dt.yaml: gpio@1c024000:
'reg-io-width' does not match any of the regexes: '^gpio-(port|controller)@[0-9a-f]+$', 'pinctrl-[0-9]+'
Link: https://lore.kernel.org/r/20200917165040.22908-1-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
The Synopsys DesignWare APB GPIO controller driver does not parse
reg-io-width and dtschema does not allow it so drop it to fix dtschema
warnings like:
arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dt.yaml: gpio@20000:
'reg-io-width' does not match any of the regexes: '^gpio-(port|controller)@[0-9a-f]+$', 'pinctrl-[0-9]+'
Link: https://lore.kernel.org/r/20200917164909.22490-1-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
SoCFPGA DTS updates for v5.10
- Increase shared-dma-pool size to 32MB
- Add ptp_ref clock properties to the ethernet nodes on Stratix10 and Agilex
* tag 'socfpga_dts_update_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: stratix10/agilex: add the ptp_ref clock
arm64: dts: agilex: increase shared memory size to 32Mb
Link: https://lore.kernel.org/r/20200916204422.30897-1-dinguyen@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
Ux500 DTS updates for the v5.10 kernel cycle:
- Add the s6e63m0 display to the Golden device
- Add the KTD253 backlight to the Skomer device
- Update the LP5521 LED DTS entries for binding changes
* tag 'ux500-dts-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
ARM: dts: ste-href: Add reg property to the LP5521 channel nodes
ARM: dts: ux500-skomer: Add KTD253 backlight
ARM: dts: ux500-golden: Add S6E63M0 DSI display
Link: https://lore.kernel.org/r/CACRpkda=-cgFjN7K2vBU5x4uSYrohrZSbjqMnSFb3Qe2Az1W5g@mail.gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Sparx5 DT updates for Linux 5.10
- Add public repo to MAINTAINERS
- Add SPI controller and devices
- Add eMMC controller and devices
- Add temperature sensor
* tag 'sparx5-dt-5.10' of https://github.com/microchip-ung/linux-upstream:
arm64: dts: sparx5: Add spi-nand devices
arm64: dts: sparx5: Add spi-nor support
arm64: dts: sparx5: Add SPI controller and associated mmio-mux
MAINTAINERS: Add git tree for Sparx5
arm64: dts: sparx5: Add hwmon temperature sensor
arm64: dts: sparx5: Add Sparx5 eMMC support
Link: https://lore.kernel.org/r/878sda2dj0.fsf@microchip.com
Signed-off-by: Olof Johansson <olof@lixom.net>
ARM: DT: Hisilicon ARM32 SoCs DT updates for 5.10
- Update the SP804 nodes to have the correct clocks and
clock names for the hi3620 SoC
- Update the SP805 nodes to have the correct clocks and
clock names for the hix5hd2 SoC
* tag 'hisi-arm32-dt-for-5.10' of git://github.com/hisilicon/linux-hisi:
ARM: dts: hisilicon: Fix SP805 clocks
ARM: dts: hisilicon: Fix SP804 users
Link: https://lore.kernel.org/r/5F617209.90003@hisilicon.com
Signed-off-by: Olof Johansson <olof@lixom.net>
ARM64: DT: Hisilicon ARM64 SoCs DT updates for 5.10
- Change the status properties from "ok" to "okay" for
all the hisilicon SoCs
- Update the SP805 nodes to have the correct clocks and
clock names for the hi3660 and hi6220 SoCs
* tag 'hisi-arm64-dt-for-5.10' of git://github.com/hisilicon/linux-hisi:
arm64: dts: hisilicon: Fix SP805 clocks
arm64: dts: hisilicon: replace status value "ok" by "okay"
Link: https://lore.kernel.org/r/5F617134.3050705@hisilicon.com
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch introduces /sys/devices/system/stp/scheduled_leap_seconds,
which will contain either 0,0 if no leap second is scheduled, or
the UTC timestamp + leap second offset.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
In the current implementation, leap seconds are only synchronized
during the bootup process when the STP clock is synced. If the Leap
second offset (LSO) changes the machine must be rebooted, which is
not desired. This patch adds the required code to handle Leap second
changes during runtime. If the Leap second changes, a Configuration
change machine check is triggered. The STP code than schedules a Leap
second insertion/deletion with do_adjtimex().
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
In hardware-dependent headers using u32 is easier
to read and less error-prone.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The sysfs function might race with stp_work_fn. To prevent that,
add the required locking. Another issue is that the sysfs functions
are checking the stp_online flag, but this flag just holds the user
setting whether STP is enabled. Add a flag to clock_sync_flag whether
stp_info holds valid data and use that instead.
Cc: stable@vger.kernel.org
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Pull more kvm fixes from Paolo Bonzini:
"Five small fixes.
The nested migration bug will be fixed with a better API in 5.10 or
5.11, for now this is a fix that works with existing userspace but
keeps the current ugly API"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Add a dedicated INVD intercept routine
KVM: x86: Reset MMU context if guest toggles CR4.SMAP or CR4.PKE
KVM: x86: fix MSR_IA32_TSC read for nested migration
selftests: kvm: Fix assert failure in single-step test
KVM: x86: VMX: Make smaller physical guest address space support user-configurable
Pull MIPS fixes from Thomas Bogendoerfer:
- fixed FP register access on Loongsoon-3
- added missing 1074 cpu handling
- fixed Loongson2ef build error
* tag 'mips_fixes_5.9_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: BCM47XX: Remove the needless check with the 1074K
MIPS: Add the missing 'CPU_1074K' into __get_cpu_type()
MIPS: Loongson2ef: Disable Loongson MMI instructions
MIPS: Loongson-3: Fix fp register access if MSA enabled
Reset the MMU context during kvm_set_cr4() if SMAP or PKE is toggled.
Recent commits to (correctly) not reload PDPTRs when SMAP/PKE are
toggled inadvertantly skipped the MMU context reset due to the mask
of bits that triggers PDPTR loads also being used to trigger MMU context
resets.
Fixes: 427890aff8 ("kvm: x86: Toggling CR4.SMAP does not load PDPTEs in PAE mode")
Fixes: cb957adb4e ("kvm: x86: Toggling CR4.PKE does not load PDPTEs in PAE mode")
Cc: Jim Mattson <jmattson@google.com>
Cc: Peter Shier <pshier@google.com>
Cc: Oliver Upton <oupton@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923215352.17756-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Correct the property for reset GPIOs of the GPIO expander.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The convention for node names is to use hyphens, not underscores.
dtschema for pca95xx expects GPIO hogs to end with 'hog' prefix.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The PCA9539 GPIO expander requires GPIO controller properties to operate
properly.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
All am437x boards have been converted to use new driver, so drop legacy
cpsw dt node.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The dual_mac mode has been preserved the same way between legacy and new
driver, and one port devices works the same as 1 dual_mac port - it's safe
to switch drivers.
So, Switch all am437x boards to use new cpsw switch driver. Those boards
have or 2 Ext. port wired and configured in dual_mac mode by default, or
only 1 Ext. port.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add DT node for the new cpsw switchdev based driver.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Use the typed skcipher init/exit routines instead of the generic
cra_init/_exit routines when instantiating/releasing the XTS
skciphers.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reordering the tweak is never necessary for encryption, so avoid the
argument load on the encryption path.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of using a homegrown macrofied version of the adr instruction
that sets the Thumb bit in the output value, only to ensure that any
bx instructions consuming that value will not switch out of Thumb mode
when branching, use non-interworking mov (to PC) instructions, which
achieve the same thing.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The ADRL pseudo instruction is not an architectural construct, but a
convenience macro that was supported by the ARM proprietary assembler
and adopted by binutils GAS as well, but only when assembling in 32-bit
ARM mode. Therefore, it can only be used in assembler code that is known
to assemble in ARM mode only, but as it turns out, the Clang assembler
does not implement ADRL at all, and so it is better to get rid of it
entirely.
So replace the ADRL instruction with a ADR instruction that refers to
a nearer symbol, and apply the delta explicitly using an additional
instruction.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The ADRL pseudo instruction is not an architectural construct, but a
convenience macro that was supported by the ARM proprietary assembler
and adopted by binutils GAS as well, but only when assembling in 32-bit
ARM mode. Therefore, it can only be used in assembler code that is known
to assemble in ARM mode only, but as it turns out, the Clang assembler
does not implement ADRL at all, and so it is better to get rid of it
entirely.
So replace the ADRL instruction with a ADR instruction that refers to
a nearer symbol, and apply the delta explicitly using an additional
instruction.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
