ARM: soc: TI driver updates for v5.10
Consist of:
- Add Ring accelerator support for AM65x
- Add TI PRUSS platform driver and enable it on available platforms
- Extend PRUSS driver for CORECLK_MUX/IEPCLK_MUX support
- UDMA rx ring pair fix
- Add socinfo entry for J7200
* tag 'drivers_soc_for_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
Add missing '#' to fix schema errors:
soc: ti: Convert to DEFINE_SHOW_ATTRIBUTE
dmaengine: ti: k3-udma-glue: Fix parameters for rx ring pair request
soc: ti: k3-socinfo: Add entry for J7200
soc: ti: pruss: support CORECLK_MUX and IEPCLK_MUX
dt-bindings: soc: ti: Update TI PRUSS bindings regarding clock-muxes
firmware: ti_sci: allow frequency change for disabled clocks by default
soc: ti: ti_sci_pm_domains: switch to use multiple genpds instead of one
soc: ti: pruss: Enable support for ICSSG subsystems on K3 J721E SoCs
soc: ti: pruss: Enable support for ICSSG subsystems on K3 AM65x SoCs
soc: ti: pruss: Add support for PRU-ICSS subsystems on 66AK2G SoC
soc: ti: pruss: Add support for PRU-ICSS subsystems on AM57xx SoCs
soc: ti: pruss: Add support for PRU-ICSSs on AM437x SoCs
soc: ti: pruss: Add a platform driver for PRUSS in TI SoCs
dt-bindings: soc: ti: Add TI PRUSS bindings
bindings: soc: ti: soc: ringacc: remove ti,dma-ring-reset-quirk
soc: ti: k3: ringacc: add am65x sr2.0 support
Link: https://lore.kernel.org/r/1600656828-29267-1-git-send-email-santosh.shilimkar@oracle.com
Signed-off-by: Olof Johansson <olof@lixom.net>
arm64: dtc: amlogic updates for v5.10
- new boards: libretch s905x cc v2, Hardkernel ODROID-N2+
- vim3: sound updates
* tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
arm64: dts: meson: initial support for aml-s905x-cc v2
dt-bindings: arm: amlogic: add support for libretch s905x cc v2
arm64: dts: meson: add support for the ODROID-N2+
dt-bindings: arm: amlogic: add support for the ODROID-N2+
arm64: dts: meson: convert ODROID-N2 to dtsi
arm64: dts: meson: vim3l: remove sound card definition
arm64: dts: meson: vim3: make sound card common to all variants
arm64: dts: meson: vim3: correct led polarity
Link: https://lore.kernel.org/r/7h3636kjxd.fsf@baylibre.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Qualcomm ARM64 DT updates for v5.10
Cleanup, refactor and modernize MSM8916 by sorting nodes, moving device
and platform specific parts to their respective files, add and use
labels for reference nodes and use IRQ defines. Migrate TCSR mutex off
the depricated binding, add resin node for PM8916.
Add LPASS clock controller for SC7180. Fix the LLCC reg, increase
interconnect-cells, drop flags on MDSS irqs. Add interconnects for
display, eMMC and SD-card, specify 'sustainable_power' for CPU thermal
zones, improve pinconf states related to UART and Bluetooth. Add new DT
for Lazor and Trogdor.
Increase #interconnect-cells for SDM845 to allow tags, add OPP tables
and power-domains for Venus and interconnects for display. Fix the ports
on the HDMI nodes for DB845c and add DT for the Xiaomi Poco F1.
Add interconnect providers, fix up primary USB's clock and use
dt-binding defines for GPU clocks on SM8150.
Add interconnect providers, CPUfreq, thermal configuration and missing
uarts for SM8250. Fix up naming of debug uart, add always-on supply
clock to gcc, fix up the sleep clock rate and define OPP tables for all
QUP devices. Then add a new DeviceTree for the QRB5165 RB5 board.
Enable watchdog on IPQ8074 and use the appropriate compatible for the
PMU node. Enable DVFS support for IPQ6018.
Finally correct the spelling of "interrupts" in MSM8992 uart node, fix
missing # in PM660 #interrupt-cells, add second VFE power-domain to
camss in MSM8996 and sort the Makefile.
* tag 'qcom-arm64-for-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (75 commits)
arm64: dts: qcom: sm8250: Add thermal zones and throttling support
arm64: dts: qcom: sm8250: Add cpufreq hw node
arm64: dts: qcom: sdm845: Add interconnects property for display
arm64: dts: qcom: sm8250: Add EPSS L3 interconnect provider
arm64: dts: qcom: sm8150: Add OSM L3 interconnect provider
arm64: dts: qcom: sm8250: add interconnect nodes
arm64: dts: qcom: sm8150: add interconnect nodes
arm64: dts: qcom: sc7180: Increase the number of interconnect cells
arm64: dts: qcom: sdm845: Increase the number of interconnect cells
arm64: dts: qcom: Makefile: Sort lines
arm64: dts: qcom: pm8916: Sort nodes
arm64: dts: qcom: msm8916: Sort nodes
arm64: dts: qcom: msm8916: Pad addresses
arm64: dts: qcom: msm8916: Rename "x-smp2p" to "smp2p-x"
arm64: dts: qcom: msm8916: Use more generic node names
arm64: dts: qcom: msm8916: Add MSM8916-specific compatibles to SCM/MSS
arm64: dts: qcom: msm8916: Minor style fixes
arm64: dts: qcom: msm8916: Drop qcom,tcsr-mutex syscon
arm64: dts: qcom: msm8916: Use IRQ defines, add IRQ types
arm64: dts: qcom: msm8916: Fix MDP/DSI interrupts
...
Link: https://lore.kernel.org/r/20200924040607.180039-1-bjorn.andersson@linaro.org
Signed-off-by: Olof Johansson <olof@lixom.net>
New boards NanoPi R2S, A95X-Z2 and more Rock-Pi4 variants.
Khadas-edge additions and a some fixes.
* tag 'v5.10-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: add ir-receiver node to rk3399-khadas-edge
arm64: dts: rockchip: add spiflash node to rk3399-khadas-edge
arm64: dts: rockchip: Add support for FriendlyARM NanoPi R2S
dt-bindings: Add doc for FriendlyARM NanoPi R2S
arm64: dts: rockchip: replace status value "ok" by "okay"
arm64: dts: rockchip: fix cpu-supply for rk3328-evb
arm64: dts: rockchip: add rk3318 A95X Z2 board
dt-bindings: arm: rockchip: add Zkmagic A95X Z2 description
dt-bindings: Add vendor prefix for Shenzhen Zkmagic Technology Co., Ltd.
arm64: dts: rockchip: Add Radxa ROCK Pi 4C support
arm64: dts: rockchip: Add Radxa ROCK Pi 4B support
arm64: dts: rockchip: Mark rock-pi-4 as rock-pi-4a dts
dt-bindings: arm: rockchip: Update ROCKPi 4 binding
arm64: dts: rockchip: change spdif fallback compatible on rk3308
arm64: dts: rockchip: Fix power routing to support POE on rk3399-roc-pc
Link: https://lore.kernel.org/r/16010805.MhVyP8KKtY@diego
Signed-off-by: Olof Johansson <olof@lixom.net>
Samsung DTS ARM changes for v5.10, part two
1. Further cleanup of DTS with dtschema: s5pv210, s3c6410 and s3c24xx.
This fixes many minor dtschema violations, adds few missing
functionalities (like clock for RTC) and improves the code
maintainability in few places. Except the RTC clock, this should not
have visible impact.
2. Fix few remaining Exynos dtschema violations.
* tag 'samsung-dt-5.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (36 commits)
ARM: dts: s5pv210: replace deprecated "gpios" i2c-gpio property in Goni
ARM: dts: s5pv210: replace deprecated "gpios" i2c-gpio property in Aquila
ARM: dts: s5pv210: move fixed regulators under root node in Goni
ARM: dts: s5pv210: move fixed regulators under root node in Aquila
ARM: dts: exynos: Align OPP table name with dt-schema
ARM: dts: exynos: move assigned-clock* properties to i2s0 node in Odroid XU4
ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid
ARM: dts: exynos: add input clock to CMU in Exynos3250
ARM: dts: s3c24xx: move fixed clocks under root node in SMDK2416
ARM: dts: s3c24xx: add address to CPU node
ARM: dts: s3c24xx: align PWM/timer node name with dtschema
ARM: dts: s3c24xx: override nodes by label
ARM: dts: s3c24xx: fix number of PWM cells
ARM: dts: s3c6410: remove additional CPU compatible
ARM: dts: s3c6410: align node SROM bus node name with dtschema in SMDK6410
ARM: dts: s3c6410: align node SROM bus node name with dtschema in Mini6410
ARM: dts: s3c6410: move fixed clocks under root node in SMDK6410
ARM: dts: s3c6410: move fixed clocks under root node in Mini6410
ARM: dts: s5pv210: correct ethernet unit address in SMDKV210
ARM: dts: s5pv210: align SPI GPIO node name with dtschema in Aries
...
Link: https://lore.kernel.org/r/20200920160705.9651-3-krzk@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
Pull media fixes from Mauro Carvalho Chehab:
- fix a regression at the CEC adapter core
- two uAPI patches (one revert) for changes in this development cycle
* tag 'media/v5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: dt-bindings: media: imx274: Convert to json-schema
media: media/v4l2: remove V4L2_FLAG_MEMORY_NON_CONSISTENT flag
media: cec-adap.c: don't use flush_scheduled_work()
Add a label property for the AT24 EEPROM to allow a custom name to be
used for identifying the EEPROM on a board. This is useful when there
is more than one EEPROM present.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Georgi writes:
interconnect changes for 5.10
Here are the interconnect changes for the 5.10-rc1 merge window
consisting of core changes, new drivers and cleanups.
Core changes:
- New bulk API helpers for managing multiple interconnect paths.
- New xlate_extended() interface for parsing additional data from DT.
- Support for sync_state().
Driver changes:
- New drivers for SM8150 and SM8250 platforms.
- New drivers for the Qualcomm OSM and EPSS hardware blocks.
- Per-BCM scaling factor support.
- Misc cleanups.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
* tag 'icc-5.10-rc1' of https://git.linaro.org/people/georgi.djakov/linux: (28 commits)
interconnect: imx: simplify the return expression of imx_icc_unregister
interconnect: imx: Simplify with dev_err_probe()
interconnect: core: Simplify with dev_err_probe()
interconnect: qcom: Use icc_sync_state
interconnect: Add sync state support
interconnect: Add get_bw() callback
interconnect: qcom: osm-l3: Mark more structures const
interconnect: qcom: Add EPSS L3 support on SM8250
dt-bindings: interconnect: Add EPSS L3 DT binding on SM8250
interconnect: qcom: Lay the groundwork for adding EPSS support
interconnect: qcom: Add OSM L3 support on SM8150
dt-bindings: interconnect: Add OSM L3 DT binding on SM8150
interconnect: qcom: sc7180: Replace xlate with xlate_extended
interconnect: qcom: sdm845: Replace xlate with xlate_extended
interconnect: qcom: Implement xlate_extended() to parse tags
dt-bindings: interconnect: Document the support of optional path tag
interconnect: Introduce xlate_extended() callback
interconnect: qcom: Add support for per-BCM scaling factors
interconnect: qcom: Only wait for completion in AMC/WAKE by default
interconnect: qcom: Support bcm-voter-specific TCS wait behavior
...
Currently, the aspeed-sgpio driver exposes up to 80 GPIO lines,
corresponding to the 80 status bits available in hardware. Each of these
lines can be configured as either an input or an output.
However, each of these GPIOs is actually an input *and* an output; we
actually have 80 inputs plus 80 outputs.
This change expands the maximum number of GPIOs to 160; the lower half
of this range are the input-only GPIOs, the upper half are the outputs.
We fix the GPIO directions to correspond to this mapping.
This also fixes a bug when setting GPIOs - we were reading from the
input register, making it impossible to set more than one output GPIO.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Fixes: 7db47faae7 ("gpio: aspeed: Add SGPIO driver")
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The PTN5150 chip can be used in hardware designs with only reporting of
USB Type-C connection, without the VBUS control.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Vijai Kumar K <vijaikumar.kanagarajan@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Interrupts do not have to be always GPIO based so instead of expecting
"int-gpios" property and converting the GPIO to an interrupt, just
accept any interrupt via generic "interrupts" property.
Mark the old "int-gpios" as deprecated.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Vijai Kumar K <vijaikumar.kanagarajan@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Convert the ptn-5150 extcon driver bindings to DT schema format using
json-schema. The differences with original bindings document:
- Use "gpios" suffix for the "int" and "vbus" gpio,
- Skip generic "pinctrl" property as it is not really required.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Vijai Kumar K <vijaikumar.kanagarajan@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Some RTCs can be equipped with a chargeable battery or supercap.
Every RTC allowing this whose driver's implement it are charged by
default. To disable this the trickle-diode-disable flag exists.
If a driver did not support charging and some time later one wants to
add that feature, there is currently no way to do it without breaking
dt backwards compatibility. RTCs on boards without the
trickle-diode-disable flag in their device tree would suddenly charge
their battery/supercap which is a change in behavior.
Change that by introducing aux-voltage-chargeable, not as a flag but as
a uint32 enum allowing to set "do not charge" (0) or "charge" (1). This
dt property is optional, so we can now distinguish these cases.
Care must be taken to support the old behavior for device trees without
aux-voltage-chargeable nonetheless to stay compatible.
Signed-off-by: Bastian Krause <bst@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200917183246.19446-2-bst@pengutronix.de
The J7200 SoC is a part of the K3 Multicore SoC architecture platform.
It is targeted for automotive gateway, vehicle compute systems,
Vehicle-to-Vehicle (V2V) and Vehicle-to-Everything (V2X) applications.
The SoC aims to meet the complex processing needs of modern embedded
products.
Some highlights of this SoC are:
* Dual Cortex-A72s in a single cluster, two clusters of lockstep
capable dual Cortex-R5F MCUs and a Centralized Device Management and
Security Controller (DMSC).
* Configurable L3 Cache and IO-coherent architecture with high data
throughput capable distributed DMA architecture under NAVSS.
* Integrated Ethernet switch supporting up to a total of 4 external ports
in addition to legacy Ethernet switch of up to 2 ports.
* Upto 1 PCIe-GEN3 controller, 1 USB3.0 Dual-role device subsystems,
20 MCANs, 3 McASP, eMMC and SD, OSPI/HyperBus memory controller, I3C and
I2C, eCAP/eQEP, eHRPWM among other peripherals.
* One hardware accelerator block containing AES/DES/SHA/MD5 called SA2UL
management.
See J7200 Technical Reference Manual (SPRUIU1, June 2020)
for further details: https://www.ti.com/lit/pdf/spruiu1
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Suman Anna <s-anna@ti.com>
Link: https://lore.kernel.org/r/20200914162231.2535-4-lokeshvutla@ti.com
Added documentation and Versal reset indices to describe
about Versal reset driver bindings.
In Versal all reset indices includes Class, SubClass, Type, Index
information whereas class refers to clock, reset, power etc.,
Underlying firmware in Versal have such classification and expects
the ID to be this way.
[13:0] - Index bits
[19:14] - Type bits
[25:20] - SubClass bits
[31:26] - Class bits.
Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
When WIZ wraps a Cadence Torrent PHY (instead of Cadence Sierra PHY)
there is a difference in the refclk-dig node: Torrent only has two
clocks instead of Sierra's four clocks. Add minItems: 2 to solve this.
Additionally, in our use case we only need to use assigned-clock for a
single clock, but the current binding requires either no assigned-clocks
or two. Fix this by adding minItems: 1 to all the assigned-clock
properties.
There was also an extra trailing whitespace, which this patch removes.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://lore.kernel.org/r/20200918083743.213874-2-tomi.valkeinen@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
drm-misc-next for 5.10:
UAPI Changes:
Cross-subsystem Changes:
- virtio: Merged a PR for patches that will affect drm/virtio
Core Changes:
- dev: More devm_drm convertions and removal of drm_dev_init
- atomic: Split out drm_atomic_helper_calc_timestamping_constants of
drm_atomic_helper_update_legacy_modeset_state
- ttm: More rework
Driver Changes:
- i915: selftests improvements
- panfrost: support for Amlogic SoC
- vc4: one fix
- tree-wide: conversions to devm_drm_dev_alloc,
- ast: simplifications of the atomic modesetting code
- panfrost: multiple fixes
- vc4: multiple fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200921152956.2gxnsdgxmwhvjyut@gilmour.lan
