[ Upstream commit c9d659b60770db94b898f94947192a94bbf95c5c ]
If a Root Complex Integrated Endpoint (RCiEP) is implemented, it may signal
errors through a Root Complex Event Collector (RCEC). Each RCiEP must be
associated with no more than one RCEC.
For an RCEC (which is technically not a Bridge), error messages "received"
from associated RCiEPs must be enabled for "transmission" in order to cause
a System Error via the Root Control register or (when the Advanced Error
Reporting Capability is present) reporting via the Root Error Command
register and logging in the Root Error Status register and Error Source
Identification register.
Given the commonality with Root Ports and the need to also support AER and
PME services for RCECs, extend the Root Port driver to support RCEC devices
by adding the RCEC Class ID to the driver structure.
Co-developed-by: Sean V Kelley <sean.v.kelley@intel.com>
Link: https://lore.kernel.org/r/20201121001036.8560-3-sean.v.kelley@intel.com
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # non-native/no RCEC
Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 50cc18fcd3053fb46a09db5a39e6516e9560f765 ]
If an OS has not been granted AER control via _OSC, it should not make
changes to PCI_ERR_ROOT_COMMAND and PCI_ERR_ROOT_STATUS related registers.
Per section 4.5.1 of the System Firmware Intermediary (SFI) _OSC and DPC
Updates ECN [1], this bit also covers these aspects of the PCI Express
Advanced Error Reporting. Based on the above and earlier discussion [2],
make the following changes:
Add a check for the native case (i.e., AER control via _OSC)
Note that the previous "clear, reset, enable" order suggests that the reset
might cause errors that we should ignore. After this commit, those errors
(if any) will remain logged in the PCI_ERR_ROOT_STATUS register.
[1] System Firmware Intermediary (SFI) _OSC and DPC Updates ECN, Feb 24,
2020, affecting PCI Firmware Specification, Rev. 3.2
https://members.pcisig.com/wg/PCI-SIG/document/14076
[2] https://lore.kernel.org/linux-pci/20201020162820.GA370938@bjorn-Precision-5520/
Link: https://lore.kernel.org/r/20201121001036.8560-2-sean.v.kelley@intel.com
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # non-native/no RCEC
Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b0b0b77ea611e3088e9523e60860f4f41b62b235 ]
KASAN reports:
[ 4.668325][ T0] BUG: KASAN: wild-memory-access in dmar_parse_one_rhsa (arch/x86/include/asm/bitops.h:214 arch/x86/include/asm/bitops.h:226 include/asm-generic/bitops/instrumented-non-atomic.h:142 include/linux/nodemask.h:415 drivers/iommu/intel/dmar.c:497)
[ 4.676149][ T0] Read of size 8 at addr 1fffffff85115558 by task swapper/0/0
[ 4.683454][ T0]
[ 4.685638][ T0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.19.0-rc3-00004-g0e862838f290 #1
[ 4.694331][ T0] Hardware name: Supermicro SYS-5018D-FN4T/X10SDV-8C-TLN4F, BIOS 1.1 03/02/2016
[ 4.703196][ T0] Call Trace:
[ 4.706334][ T0] <TASK>
[ 4.709133][ T0] ? dmar_parse_one_rhsa (arch/x86/include/asm/bitops.h:214 arch/x86/include/asm/bitops.h:226 include/asm-generic/bitops/instrumented-non-atomic.h:142 include/linux/nodemask.h:415 drivers/iommu/intel/dmar.c:497)
after converting the type of the first argument (@nr, bit number)
of arch_test_bit() from `long` to `unsigned long`[0].
Under certain conditions (for example, when ACPI NUMA is disabled
via command line), pxm_to_node() can return %NUMA_NO_NODE (-1).
It is valid 'magic' number of NUMA node, but not valid bit number
to use in bitops.
node_online() eventually descends to test_bit() without checking
for the input, assuming it's on caller side (which might be good
for perf-critical tasks). There, -1 becomes %ULONG_MAX which leads
to an insane array index when calculating bit position in memory.
For now, add an explicit check for @node being not %NUMA_NO_NODE
before calling test_bit(). The actual logics didn't change here
at all.
[0] 0e862838f2
Fixes: ee34b32d8c ("dmar: support for parsing Remapping Hardware Static Affinity structure")
Cc: stable@vger.kernel.org # 2.6.33+
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2368048bf5c2ec4b604ac3431564071e89a0bc71 ]
Return '1', not '-1', when handling an illegal WRMSR to a MCi_CTL or
MCi_STATUS MSR. The behavior of "all zeros' or "all ones" for CTL MSRs
is architectural, as is the "only zeros" behavior for STATUS MSRs. I.e.
the intent is to inject a #GP, not exit to userspace due to an unhandled
emulation case. Returning '-1' gets interpreted as -EPERM up the stack
and effecitvely kills the guest.
Fixes: 890ca9aefa ("KVM: Add MCE support")
Fixes: 9ffd986c6e ("KVM: X86: #GP when guest attempts to write MCi_STATUS register w/o 0")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20220512222716.4112548-2-seanjc@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 689640efc0a2c4e07e6f88affe6d42cd40cc3f85 ]
When scpi probe fails, at any point, we need to ensure that the scpi_info
is not set and will remain NULL until the probe succeeds. If it is not
taken care, then it could result use-after-free as the value is exported
via get_scpi_ops() and could refer to a memory allocated via devm_kzalloc()
but freed when the probe fails.
Link: https://lore.kernel.org/r/20220701160310.148344-1-sudeep.holla@arm.com
Cc: stable@vger.kernel.org # 4.19+
Reported-by: huhai <huhai@kylinos.cn>
Reviewed-by: Jackie Liu <liuyun01@kylinos.cn>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8960f878e39fadc03d74292a6731f1e914cf2019 ]
When a PHY interrupt is signaled, the SMSC LAN95xx driver updates the
MAC full duplex mode and PHY flow control registers based on cached data
in struct phy_device:
smsc95xx_status() # raises EVENT_LINK_RESET
usbnet_deferred_kevent()
smsc95xx_link_reset() # uses cached data in phydev
Simultaneously, phylib polls link status once per second and updates
that cached data:
phy_state_machine()
phy_check_link_status()
phy_read_status()
lan87xx_read_status()
genphy_read_status() # updates cached data in phydev
If smsc95xx_link_reset() wins the race against genphy_read_status(),
the registers may be updated based on stale data.
E.g. if the link was previously down, phydev->duplex is set to
DUPLEX_UNKNOWN and that's what smsc95xx_link_reset() will use, even
though genphy_read_status() may update it to DUPLEX_FULL afterwards.
PHY interrupts are currently only enabled on suspend to trigger wakeup,
so the impact of the race is limited, but we're about to enable them
perpetually.
Avoid the race by delaying execution of smsc95xx_link_reset() until
phy_state_machine() has done its job and calls back via
smsc95xx_handle_link_change().
Signaling EVENT_LINK_RESET on wakeup is not necessary because phylib
picks up link status changes through polling. So drop the declaration
of a ->link_reset() callback.
Note that the semicolon on a line by itself added in smsc95xx_status()
is a placeholder for a function call which will be added in a subsequent
commit. That function call will actually handle the INT_ENP_PHY_INT_
interrupt.
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # LAN9514/9512/9500
Tested-by: Ferry Toth <fntoth@gmail.com> # LAN9514
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3108871f19221372b251f7da1ac38736928b5b3a ]
Upon receiving data from the Interrupt Endpoint, the SMSC LAN95xx driver
attempts to clear the signaled interrupts by writing "all ones" to the
Interrupt Status Register.
However the driver only ever enables a single type of interrupt, namely
the PHY Interrupt. And according to page 119 of the LAN950x datasheet,
its bit in the Interrupt Status Register is read-only. There's no other
way to clear it than in a separate PHY register:
https://www.microchip.com/content/dam/mchp/documents/UNG/ProductDocuments/DataSheets/LAN950x-Data-Sheet-DS00001875D.pdf
Consequently, writing "all ones" to the Interrupt Status Register is
pointless and can be dropped.
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # LAN9514/9512/9500
Tested-by: Ferry Toth <fntoth@gmail.com> # LAN9514
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e16eceea863b417fd328588b1be1a79de0bc937f ]
According to the Arasan NAND controller spec, the flash clock rate for SDR
must be <= 100 MHz, while for NV-DDR it must be the same as the rate of the
CLK line for the mode. The driver previously always set 100 MHz for NV-DDR,
which would result in incorrect behavior for NV-DDR modes 0-4.
The appropriate clock rate can be calculated from the NV-DDR timing
parameters as 1/tCK, or for rates measured in picoseconds,
10^12 / nand_nvddr_timings->tCK_min.
Fixes: 197b88fecc ("mtd: rawnand: arasan: Add new Arasan NAND controller")
CC: stable@vger.kernel.org # 5.8+
Signed-off-by: Olga Kitaina <okitain@gmail.com>
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220628154824.12222-3-amit.kumar-mahapatra@xilinx.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit da8e393e23efb60eba8959856c7df88f9859f6eb ]
vc4_drv isn't necessarily under the /soc node in DT as it is a
virtual device, but it is the one that does the allocations.
The DMA addresses are consumed by primarily the HVS or V3D, and
those require VideoCore cache alias address mapping, and so will be
under /soc.
During probe find the a suitable device node for HVS or V3D,
and adopt the DMA configuration of that node.
Cc: <stable@vger.kernel.org>
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20220613144800.326124-2-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b5539722eb832441f309642fe5102cc3536f92b8 ]
The Elantech touchscreen/digitizer in the Surface Go mistakenly reports
having a battery. This results in a low battery message every time you
try to use the pen.
This patch adds a quirk to ignore the non-existent battery and
gets rid of the false low battery messages.
Signed-off-by: Zoltan Tamas Vajda <zoltan.tamas.vajda@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit decfe496fe77061dea658a0bfa11afd4f92b540d ]
Battery status is reported for the HP Spectre X360 Convertible 15-df0xxx
even if it does not have a battery. Prevent it to always report the
battery as low.
Signed-off-by: Elia Devito <eliadevito@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 39e8d062b03c3dc257d880d82bd55cdd9e185a3b ]
To comply with the panel sequence, hold the mipi signal to LP00 before
the dcs cmds transmission, and pull the mipi signal high from LP00 to
LP11 until the start of the dcs cmds transmission.
The normal panel timing is :
(1) pp1800 DC pull up
(2) avdd & avee AC pull high
(3) lcm_reset pull high -> pull low -> pull high
(4) Pull MIPI signal high (LP11) -> initial code -> send video data
(HS mode)
The power-off sequence is reversed.
If dsi is not in cmd mode, then dsi will pull the mipi signal high in
the mtk_output_dsi_enable function. The delay in lane_ready func is
the reaction time of dsi_rx after pulling up the mipi signal.
Fixes: 2dd8075d21 ("drm/mediatek: mtk_dsi: Use the drm_panel_bridge API")
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/1653012007-11854-4-git-send-email-xinlei.lee@mediatek.com/
Cc: <stable@vger.kernel.org> # 5.10.x: 7f6335c6a258: drm/mediatek: Modify dsi funcs to atomic operations
Cc: <stable@vger.kernel.org> # 5.10.x: cde7e2e35c28: drm/mediatek: Separate poweron/poweroff from enable/disable and define new funcs
Cc: <stable@vger.kernel.org> # 5.10.x
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: Xinlei Lee <xinlei.lee@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 81cc7e51c4f1686b71e30046437056ece6b2cb4d ]
Mipi dsi panel drivers can use mipi_dsi_dcs_{set,get}_display_brightness()
to request backlight changes.
This can be done during panel initialization (dsi is in command mode)
or afterwards (dsi is in Video Mode).
When the DSI is in Video Mode, all commands are rejected.
Detect current DSI mode in mtk_dsi_host_transfer() and switch modes
temporarily to allow commands to be sent.
Signed-off-by: Julien STEPHAN <jstephan@baylibre.com>
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2af28b241eea816e6f7668d1954f15894b45d7e3 upstream.
trace_spmi_write_begin() and trace_spmi_read_end() both call
memcpy() with a length of "len + 1". This leads to one extra
byte being read beyond the end of the specified buffer. Fix
this out-of-bound memory access by using a length of "len"
instead.
Here is a KASAN log showing the issue:
BUG: KASAN: stack-out-of-bounds in trace_event_raw_event_spmi_read_end+0x1d0/0x234
Read of size 2 at addr ffffffc0265b7540 by task thermal@2.0-ser/1314
...
Call trace:
dump_backtrace+0x0/0x3e8
show_stack+0x2c/0x3c
dump_stack_lvl+0xdc/0x11c
print_address_description+0x74/0x384
kasan_report+0x188/0x268
kasan_check_range+0x270/0x2b0
memcpy+0x90/0xe8
trace_event_raw_event_spmi_read_end+0x1d0/0x234
spmi_read_cmd+0x294/0x3ac
spmi_ext_register_readl+0x84/0x9c
regmap_spmi_ext_read+0x144/0x1b0 [regmap_spmi]
_regmap_raw_read+0x40c/0x754
regmap_raw_read+0x3a0/0x514
regmap_bulk_read+0x418/0x494
adc5_gen3_poll_wait_hs+0xe8/0x1e0 [qcom_spmi_adc5_gen3]
...
__arm64_sys_read+0x4c/0x60
invoke_syscall+0x80/0x218
el0_svc_common+0xec/0x1c8
...
addr ffffffc0265b7540 is located in stack of task thermal@2.0-ser/1314 at offset 32 in frame:
adc5_gen3_poll_wait_hs+0x0/0x1e0 [qcom_spmi_adc5_gen3]
this frame has 1 object:
[32, 33) 'status'
Memory state around the buggy address:
ffffffc0265b7400: 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1
ffffffc0265b7480: 04 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00
>ffffffc0265b7500: 00 00 00 00 f1 f1 f1 f1 01 f3 f3 f3 00 00 00 00
^
ffffffc0265b7580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffffffc0265b7600: f1 f1 f1 f1 01 f2 07 f2 f2 f2 01 f3 00 00 00 00
==================================================================
Fixes: a9fce37481 ("spmi: add command tracepoints for SPMI")
Cc: stable@vger.kernel.org
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Link: https://lore.kernel.org/r/20220627235512.2272783-1-quic_collinsd@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 20aac6c60981f5bfacd66661d090d907bf1482f0 upstream.
Validate mount_lock seqcount as soon as we cross into mount in RCU
mode. Sure, ->mnt_root is pinned and will remain so until we
do rcu_read_unlock() anyway, and we will eventually fail to unlazy if
the mount_lock had been touched, but we might run into a hard error
(e.g. -ENOENT) before trying to unlazy. And it's possible to end
up with RCU pathwalk racing with rename() and umount() in a way
that would fail with -ENOENT while non-RCU pathwalk would've
succeeded with any timings.
Once upon a time we hadn't needed that, but analysis had been subtle,
brittle and went out of window as soon as RENAME_EXCHANGE had been
added.
It's narrow, hard to hit and won't get you anything other than
stray -ENOENT that could be arranged in much easier way with the
same priveleges, but it's a bug all the same.
Cc: stable@kernel.org
X-sky-is-falling: unlikely
Fixes: da1ce0670c "vfs: add cross-rename"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e61b3125a4f036b3c6b87ffd656fc1ab00440ae9 upstream.
The function ioremap() in gscps2_probe() can fail, so
its return value should be checked.
Fixes: 4bdc0d676a ("remove ioremap_nocache and devm_ioremap_nocache")
Cc: <stable@vger.kernel.org> # v5.6+
Reported-by: Hacash Robot <hacashRobot@santino.com>
Signed-off-by: Xie Shaowen <studentxswpy@163.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e362359ace6f87c201531872486ff295df306d13 upstream.
Commit 55e8c8eb2c ("posix-cpu-timers: Store a reference to a pid not a
task") started looking up tasks by PID when deleting a CPU timer.
When a non-leader thread calls execve, it will switch PIDs with the leader
process. Then, as it calls exit_itimers, posix_cpu_timer_del cannot find
the task because the timer still points out to the old PID.
That means that armed timers won't be disarmed, that is, they won't be
removed from the timerqueue_list. exit_itimers will still release their
memory, and when that list is later processed, it leads to a
use-after-free.
Clean up the timers from the de-threaded task before freeing them. This
prevents a reported use-after-free.
Fixes: 55e8c8eb2c ("posix-cpu-timers: Store a reference to a pid not a task")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220809170751.164716-1-cascardo@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3a2ba42cbd0b669ce3837ba400905f93dd06c79f upstream.
The bitops compile-time optimization series revealed one more
problem in olpc-xo1-sci.c:send_ebook_state(), resulted in GCC
warnings:
arch/x86/platform/olpc/olpc-xo1-sci.c: In function 'send_ebook_state':
arch/x86/platform/olpc/olpc-xo1-sci.c:83:63: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses]
83 | if (!!test_bit(SW_TABLET_MODE, ebook_switch_idev->sw) == state)
| ^~
arch/x86/platform/olpc/olpc-xo1-sci.c:83:13: note: add parentheses around left hand side expression to silence this warning
Despite this code working as intended, this redundant double
negation of boolean value, together with comparing to `char`
with no explicit conversion to bool, makes compilers think
the author made some unintentional logical mistakes here.
Make it the other way around and negate the char instead
to silence the warnings.
Fixes: d2aa37411b ("x86/olpc/xo1/sci: Produce wakeup events for buttons and switches")
Cc: stable@vger.kernel.org # 3.5+
Reported-by: Guenter Roeck <linux@roeck-us.net>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e6cfcdda8cbe81eaf821c897369a65fec987b404 upstream.
AMD's "Technical Guidance for Mitigating Branch Type Confusion,
Rev. 1.0 2022-07-12" whitepaper, under section 6.1.2 "IBPB On
Privileged Mode Entry / SMT Safety" says:
Similar to the Jmp2Ret mitigation, if the code on the sibling thread
cannot be trusted, software should set STIBP to 1 or disable SMT to
ensure SMT safety when using this mitigation.
So, like already being done for retbleed=unret, and now also for
retbleed=ibpb, force STIBP on machines that have it, and report its SMT
vulnerability status accordingly.
[ bp: Remove the "we" and remove "[AMD]" applicability parameter which
doesn't work here. ]
Fixes: 3ebc17006888 ("x86/bugs: Add retbleed=ibpb")
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org # 5.10, 5.15, 5.19
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537
Link: https://lore.kernel.org/r/20220804192201.439596-1-kim.phillips@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4da8c5f76825269f28d6a89fa752934a4bcb6dfa upstream.
Case (1):
The only waiter on wka_port->completion_wq is zfcp_fc_wka_port_get()
trying to open a WKA port. As such it should only be woken up by WKA port
*open* responses, not by WKA port close responses.
Case (2):
A close WKA port response coming in just after having sent a new open WKA
port request and before blocking for the open response with wait_event()
in zfcp_fc_wka_port_get() erroneously renders the wait_event a NOP
because the close handler overwrites wka_port->status. Hence the
wait_event condition is erroneously true and it does not enter blocking
state.
With non-negligible probability, the following time space sequence happens
depending on timing without this fix:
user process ERP thread zfcp work queue tasklet system work queue
============ ========== =============== ======= =================
$ echo 1 > online
zfcp_ccw_set_online
zfcp_ccw_activate
zfcp_erp_adapter_reopen
msleep scan backoff zfcp_erp_strategy
| ...
| zfcp_erp_action_cleanup
| ...
| queue delayed scan_work
| queue ns_up_work
| ns_up_work:
| zfcp_fc_wka_port_get
| open wka request
| open response
| GSPN FC-GS
| RSPN FC-GS [NPIV-only]
| zfcp_fc_wka_port_put
| (--wka->refcount==0)
| sched delayed wka->work
|
~~~Case (1)~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
zfcp_erp_wait
flush scan_work
| wka->work:
| wka->status=CLOSING
| close wka request
| scan_work:
| zfcp_fc_wka_port_get
| (wka->status==CLOSING)
| wka->status=OPENING
| open wka request
| wait_event
| | close response
| | wka->status=OFFLINE
| | wake_up /*WRONG*/
~~~Case (2)~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| wka->work:
| wka->status=CLOSING
| close wka request
zfcp_erp_wait
flush scan_work
| scan_work:
| zfcp_fc_wka_port_get
| (wka->status==CLOSING)
| wka->status=OPENING
| open wka request
| close response
| wka->status=OFFLINE
| wake_up /*WRONG&NOP*/
| wait_event /*NOP*/
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| (wka->status!=ONLINE)
| return -EIO
| return early
open response
wka->status=ONLINE
wake_up /*NOP*/
So we erroneously end up with no automatic port scan. This is a big problem
when it happens during boot. The timing is influenced by v3.19 commit
18f87a67e6 ("zfcp: auto port scan resiliency").
Fix it by fully mutually excluding zfcp_fc_wka_port_get() and
zfcp_fc_wka_port_offline(). For that to work, we make the latter block
until we got the response for a close WKA port. In order not to penalize
the system workqueue, we move wka_port->work to our own adapter workqueue.
Note that before v2.6.30 commit 828bc1212a ("[SCSI] zfcp: Set WKA-port to
offline on adapter deactivation"), zfcp did block in
zfcp_fc_wka_port_offline() as well, but with a different condition.
While at it, make non-functional cleanups to improve code reading in
zfcp_fc_wka_port_get(). If we cannot send the WKA port open request, don't
rely on the subsequent wait_event condition to immediately let this case
pass without blocking. Also don't want to rely on the additional condition
handling the refcount to be skipped just to finally return with -EIO.
Link: https://lore.kernel.org/r/20220729162529.1620730-1-maier@linux.ibm.com
Fixes: 5ab944f97e ("[SCSI] zfcp: attach and release SAN nameserver port on demand")
Cc: <stable@vger.kernel.org> #v2.6.28+
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6ba592fa014f21f35a8ee8da4ca7b95a018f13e8 ]
In the function s3fb_set_par(), the value of 'screen_size' is
calculated by the user input. If the user provides the improper value,
the value of 'screen_size' may larger than 'info->screen_size', which
may cause the following bug:
[ 54.083733] BUG: unable to handle page fault for address: ffffc90003000000
[ 54.083742] #PF: supervisor write access in kernel mode
[ 54.083744] #PF: error_code(0x0002) - not-present page
[ 54.083760] RIP: 0010:memset_orig+0x33/0xb0
[ 54.083782] Call Trace:
[ 54.083788] s3fb_set_par+0x1ec6/0x4040
[ 54.083806] fb_set_var+0x604/0xeb0
[ 54.083836] do_fb_ioctl+0x234/0x670
Fix the this by checking the value of 'screen_size' before memset_io().
Fixes: a268422de8 ("fbdev driver for S3 Trio/Virge")
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 96b550971c65d54d64728d8ba973487878a06454 ]
In the function arkfb_set_par(), the value of 'screen_size' is
calculated by the user input. If the user provides the improper value,
the value of 'screen_size' may larger than 'info->screen_size', which
may cause the following bug:
[ 659.399066] BUG: unable to handle page fault for address: ffffc90003000000
[ 659.399077] #PF: supervisor write access in kernel mode
[ 659.399079] #PF: error_code(0x0002) - not-present page
[ 659.399094] RIP: 0010:memset_orig+0x33/0xb0
[ 659.399116] Call Trace:
[ 659.399122] arkfb_set_par+0x143f/0x24c0
[ 659.399130] fb_set_var+0x604/0xeb0
[ 659.399161] do_fb_ioctl+0x234/0x670
[ 659.399189] fb_ioctl+0xdd/0x130
Fix the this by checking the value of 'screen_size' before memset_io().
Fixes: 681e14730c ("arkfb: new framebuffer driver for ARK Logic cards")
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ec0754c60217248fa77cc9005d66b2b55200ac06 ]
In the function vt8623fb_set_par(), the value of 'screen_size' is
calculated by the user input. If the user provides the improper value,
the value of 'screen_size' may larger than 'info->screen_size', which
may cause the following bug:
[ 583.339036] BUG: unable to handle page fault for address: ffffc90005000000
[ 583.339049] #PF: supervisor write access in kernel mode
[ 583.339052] #PF: error_code(0x0002) - not-present page
[ 583.339074] RIP: 0010:memset_orig+0x33/0xb0
[ 583.339110] Call Trace:
[ 583.339118] vt8623fb_set_par+0x11cd/0x21e0
[ 583.339146] fb_set_var+0x604/0xeb0
[ 583.339181] do_fb_ioctl+0x234/0x670
[ 583.339209] fb_ioctl+0xdd/0x130
Fix the this by checking the value of 'screen_size' before memset_io().
Fixes: 558b7bd86c ("vt8623fb: new framebuffer driver for VIA VT8623")
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de979c83574abf6e78f3fa65b716515c91b2613d ]
With CONFIG_PREEMPTION disabled, arch/x86/entry/thunk_$(BITS).o becomes
an empty object file.
With some old versions of binutils (i.e., 2.35.90.20210113-1ubuntu1) the
GNU assembler doesn't generate a symbol table for empty object files and
objtool fails with the following error when a valid symbol table cannot
be found:
arch/x86/entry/thunk_64.o: warning: objtool: missing symbol table
To prevent this from happening, build thunk_$(BITS).o only if
CONFIG_PREEMPTION is enabled.
BugLink: https://bugs.launchpad.net/bugs/1911359
Fixes: 320100a5ff ("x86/entry: Remove the TRACE_IRQS cruft")
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/Ys/Ke7EWjcX+ZlXO@arighi-desktop
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c58cf40e3a1d2f47c09d3489857e9476316788a ]
A build with -D_FORTIFY_SOURCE=2 enabled will produce the following warnings:
sysfs.c:63:30: warning: '%s' directive output may be truncated writing up to 255 bytes into a region of size between 0 and 255 [-Wformat-truncation=]
snprintf(filepath, 256, "%s/%s", path, filename);
^~
Bump up the buffer to PATH_MAX which is the limit and account for all of
the possible NUL and separators that could lead to exceeding the
allocated buffer sizes.
Fixes: 94f69966fa ("tools/thermal: Introduce tmon, a tool for thermal subsystem")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f1c4523f7a3aaabe7e53d3ebd378292947e95c8 ]
Since the user can control the arguments of the ioctl() from the user
space, under special arguments that may result in a divide-by-zero bug
in:
drivers/video/fbdev/arkfb.c:784: ark_set_pixclock(info, (hdiv * info->var.pixclock) / hmul);
with hdiv=1, pixclock=1 and hmul=2 you end up with (1*1)/2 = (int) 0.
and then in:
drivers/video/fbdev/arkfb.c:504: rv = dac_set_freq(par->dac, 0, 1000000000 / pixclock);
we'll get a division-by-zero.
The following log can reveal it:
divide error: 0000 [#1] PREEMPT SMP KASAN PTI
RIP: 0010:ark_set_pixclock drivers/video/fbdev/arkfb.c:504 [inline]
RIP: 0010:arkfb_set_par+0x10fc/0x24c0 drivers/video/fbdev/arkfb.c:784
Call Trace:
fb_set_var+0x604/0xeb0 drivers/video/fbdev/core/fbmem.c:1034
do_fb_ioctl+0x234/0x670 drivers/video/fbdev/core/fbmem.c:1110
fb_ioctl+0xdd/0x130 drivers/video/fbdev/core/fbmem.c:1189
Fix this by checking the argument of ark_set_pixclock() first.
Fixes: 681e14730c ("arkfb: new framebuffer driver for ARK Logic cards")
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 625395c4a0f4775e0fe00f616888d2e6c1ba49db ]
GCC-12 started triggering a new warning:
arch/x86/mm/numa.c: In function ‘cpumask_of_node’:
arch/x86/mm/numa.c:916:39: warning: the comparison will always evaluate as ‘false’ for the address of ‘node_to_cpumask_map’ will never be NULL [-Waddress]
916 | if (node_to_cpumask_map[node] == NULL) {
| ^~
node_to_cpumask_map is of type cpumask_var_t[].
When CONFIG_CPUMASK_OFFSTACK is set, cpumask_var_t is typedef'd to a
pointer for dynamic allocation, else to an array of one element. The
"wicked game" can be checked on line 700 of include/linux/cpumask.h.
The original code in debug_cpumask_set_cpu() and cpumask_of_node() were
probably written by the original authors with CONFIG_CPUMASK_OFFSTACK=y
(i.e. dynamic allocation) in mind, checking if the cpumask was available
via a direct NULL check.
When CONFIG_CPUMASK_OFFSTACK is not set, GCC gives the above warning
while compiling the kernel.
Fix that by using cpumask_available(), which does the NULL check when
CONFIG_CPUMASK_OFFSTACK is set, otherwise returns true. Use it wherever
such checks are made.
Conditional definitions of cpumask_available() can be found along with
the definition of cpumask_var_t. Check the cpumask.h reference mentioned
above.
Fixes: c032ef60d1 ("cpumask: convert node_to_cpumask_map[] to cpumask_var_t")
Fixes: de2d9445f1 ("x86: Unify node_to_cpumask_map handling between 32 and 64bit")
Signed-off-by: Siddh Raman Pant <code@siddh.me>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20220731160913.632092-1-code@siddh.me
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b6e8d40d43ae4dec00c8fea2593eeea3114b8f44 ]
With cgroup v2, the cpuset's cpus_allowed mask can be empty indicating
that the cpuset will just use the effective CPUs of its parent. So
cpuset_can_attach() can call task_can_attach() with an empty mask.
This can lead to cpumask_any_and() returns nr_cpu_ids causing the call
to dl_bw_of() to crash due to percpu value access of an out of bound
CPU value. For example:
[80468.182258] BUG: unable to handle page fault for address: ffffffff8b6648b0
:
[80468.191019] RIP: 0010:dl_cpu_busy+0x30/0x2b0
:
[80468.207946] Call Trace:
[80468.208947] cpuset_can_attach+0xa0/0x140
[80468.209953] cgroup_migrate_execute+0x8c/0x490
[80468.210931] cgroup_update_dfl_csses+0x254/0x270
[80468.211898] cgroup_subtree_control_write+0x322/0x400
[80468.212854] kernfs_fop_write_iter+0x11c/0x1b0
[80468.213777] new_sync_write+0x11f/0x1b0
[80468.214689] vfs_write+0x1eb/0x280
[80468.215592] ksys_write+0x5f/0xe0
[80468.216463] do_syscall_64+0x5c/0x80
[80468.224287] entry_SYSCALL_64_after_hwframe+0x44/0xae
Fix that by using effective_cpus instead. For cgroup v1, effective_cpus
is the same as cpus_allowed. For v2, effective_cpus is the real cpumask
to be used by tasks within the cpuset anyway.
Also update task_can_attach()'s 2nd argument name to cs_effective_cpus to
reflect the change. In addition, a check is added to task_can_attach()
to guard against the possibility that cpumask_any_and() may return a
value >= nr_cpu_ids.
Fixes: 7f51412a41 ("sched/deadline: Fix bandwidth check/update when migrating tasks between exclusive cpusets")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/r/20220803015451.2219567-1-longman@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 772b6539fdda31462cc08368e78df60b31a58bab ]
Both functions are doing almost the same, that is checking if admission
control is still respected.
With exclusive cpusets, dl_task_can_attach() checks if the destination
cpuset (i.e. its root domain) has enough CPU capacity to accommodate the
task.
dl_cpu_busy() checks if there is enough CPU capacity in the cpuset in
case the CPU is hot-plugged out.
dl_task_can_attach() is used to check if a task can be admitted while
dl_cpu_busy() is used to check if a CPU can be hotplugged out.
Make dl_cpu_busy() able to deal with a task and use it instead of
dl_task_can_attach() in task_can_attach().
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/r/20220302183433.333029-4-dietmar.eggemann@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b6a5068854cfe372da7dee3224dcf023ed5b00cb ]
Since commit dcea997beed6 ("faddr2line: Fix overlapping text section
failures, the sequel"), faddr2line is completely broken on arm64.
For some reason, on arm64, the vmlinux ELF object file type is ET_DYN
rather than ET_EXEC. Check for both when determining whether the object
is vmlinux.
Modules and vmlinux.o have type ET_REL on all arches.
Fixes: dcea997beed6 ("faddr2line: Fix overlapping text section failures, the sequel")
Reported-by: John Garry <john.garry@huawei.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/dad1999737471b06d6188ce4cdb11329aa41682c.1658426357.git.jpoimboe@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4b39e88b42d13366b831270306326b5c20971ca ]
The recent change to the PHB numbering logic has a logic error in the
handling of "ibm,opal-phbid".
When an "ibm,opal-phbid" property is present, &prop is written to and
ret is set to zero.
The following call to of_alias_get_id() is skipped because ret == 0.
But then the if (ret >= 0) is true, and the body of that if statement
sets prop = ret which throws away the value that was just read from
"ibm,opal-phbid".
Fix the logic by only doing the ret >= 0 check in the of_alias_get_id()
case.
Fixes: 0fe1e96fef0a ("powerpc/pci: Prefer PCI domain assignment via DT 'linux,pci-domain' and alias")
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220802105723.1055178-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
