[ Upstream commit d28f4091ea7ec3510fd6a3c6d433234e7a2bef14 ]
When handle qmu transfer irq, it will unlock @mtu->lock before give back
request, if another thread handle disconnect event at the same time, and
try to disable ep, it may lock @mtu->lock and free qmu ring, then qmu
irq hanlder may get a NULL gpd, avoid the KE by checking gpd's value before
handling it.
e.g.
qmu done irq on cpu0 thread running on cpu1
qmu_done_tx()
handle gpd [0]
mtu3_requ_complete() mtu3_gadget_ep_disable()
unlock @mtu->lock
give back request lock @mtu->lock
mtu3_ep_disable()
mtu3_gpd_ring_free()
unlock @mtu->lock
lock @mtu->lock
get next gpd [1]
[1]: goto [0] to handle next gpd, and next gpd may be NULL.
Fixes: 48e0d3735a ("usb: mtu3: supports new QMU format")
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20230417025203.18097-3-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 456244aeecd54249096362a173dfe06b82a5cafa upstream.
Issue description:
When an OTG port has been switched to device role and then switch back
to host role again, the USB 3.0 Host (XHCI) will not be able to detect
"plug in event of a connected USB 2.0/1.0 ((Highspeed and Fullspeed)
devices until system reboot.
Root cause and Solution:
There is a condition checking flag "ssusb->otg_switch.is_u3_drd" in
toggle_opstate(). At the end of role switch procedure, toggle_opstate()
will be called to set DC_SESSION and SOFT_CONN bit. If "is_u3_drd" was
set and switched the role to USB host 3.0, bit DC_SESSION and SOFT_CONN
will be skipped hence caused the port cannot detect connected USB 2.0
(Highspeed and Fullspeed) devices. Simply remove the condition check to
solve this issue.
Fixes: d0ed062a8b ("usb: mtu3: dual-role mode support")
Cc: stable@vger.kernel.org
Tested-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Signed-off-by: Tainping Fang <tianping.fang@mediatek.com>
Link: https://lore.kernel.org/r/20220419081245.21015-1-macpaul.lin@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Without it, the build system complains that it was declared inside
the parameter list.
Fixes the following W=1 kernel build warning(s):
In file included from drivers/usb/mtu3/mtu3_trace.c:11:
drivers/usb/mtu3/mtu3_debug.h:29:36: warning: ‘struct ssusb_mtk’ declared inside parameter list will not be visible outside of this definition or declaration
29 | void ssusb_dev_debugfs_init(struct ssusb_mtk *ssusb);
| ^~~~~~~~~
drivers/usb/mtu3/mtu3_debug.h:30:35: warning: ‘struct ssusb_mtk’ declared inside parameter list will not be visible outside of this definition or declaration
30 | void ssusb_dr_debugfs_init(struct ssusb_mtk *ssusb);
| ^~~~~~~~~
drivers/usb/mtu3/mtu3_debug.h:31:39: warning: ‘struct ssusb_mtk’ declared inside parameter list will not be visible outside of this definition or declaration
31 | void ssusb_debugfs_create_root(struct ssusb_mtk *ssusb);
| ^~~~~~~~~
drivers/usb/mtu3/mtu3_debug.h:32:39: warning: ‘struct ssusb_mtk’ declared inside parameter list will not be visible outside of this definition or declaration
32 | void ssusb_debugfs_remove_root(struct ssusb_mtk *ssusb);
| ^~~~~~~~~
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: linux-mediatek@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-2-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mtu3_prb_regs is never changed and can therefore be made const.
This allows the compiler to put it in the text section instead of the
data section.
Before:
text data bss dec hex filename
19966 7120 0 27086 69ce drivers/usb/mtu3/mtu3_debugfs.o
After:
text data bss dec hex filename
20142 6992 0 27134 69fe drivers/usb/mtu3/mtu3_debugfs.o
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
The declarations of ssusb_gadget_{init,exit} are
in the mtu3_dr.h file but the code does that implements
them does not include this. Add the include to fix the
following sparse warnigns:
drivers/usb/mtu3/mtu3_core.c:825:5: warning: symbol 'ssusb_gadget_init' was not declared. Should it be static?
drivers/usb/mtu3/mtu3_core.c:925:6: warning: symbol 'ssusb_gadget_exit' was not declared. Should it be static?
Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
usb_composite_setup_continue() may be called before composite_setup()
return USB_GADGET_DELAYED_STATUS, then the controller driver will
delay status stage after composite_setup() finish, but the class driver
don't ask the controller to continue delayed status anymore, this will
cause control transfer timeout.
happens when use mass storage (also enabled other class driver):
cpu1: cpu2
handle_setup(SET_CONFIG) //gadget driver
unlock (g->lock)
gadget_driver->setup()
composite_setup()
lock(cdev->lock)
set_config()
fsg_set_alt() // maybe some times due to many class are enabled
raise FSG_STATE_CONFIG_CHANGE
return USB_GADGET_DELAYED_STATUS
handle_exception()
usb_composite_setup_continue()
unlock(cdev->lock)
lock(cdev->lock)
ep0_queue()
lock (g->lock)
//no delayed status, nothing todo
unlock (g->lock)
unlock(cdev->lock)
return USB_GADGET_DELAYED_STATUS // composite_setup
lock (g->lock)
get USB_GADGET_DELAYED_STATUS //handle_setup [1]
Try to fix the race condition as following:
After the driver gets USB_GADGET_DELAYED_STATUS at [1], if we find
there is a usb_request in ep0 request list, it means composite already
asked us to continue delayed status by usb_composite_setup_continue(),
so we skip request about delayed_status by composite_setup() and still
do status stage.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1570611900-7112-2-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We don't need dev_err() messages when platform_get_irq() fails now that
platform_get_irq() prints an error message itself when something goes
wrong. Let's remove these prints with a simple semantic patch.
// <smpl>
@@
expression ret;
struct platform_device *E;
@@
ret =
(
platform_get_irq(E, ...)
|
platform_get_irq_byname(E, ...)
);
if ( \( ret < 0 \| ret <= 0 \) )
{
(
-if (ret != -EPROBE_DEFER)
-{ ...
-dev_err(...);
-... }
|
...
-dev_err(...);
)
...
}
// </smpl>
While we're here, remove braces on if statements that only have one
statement (manually).
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20190730181557.90391-47-swboyd@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's not needed after [1] is applied, because usb_debug_root is created
by usb common core but not usbcore now.
[1] 812086d362 ("USB: move usb debugfs directory creation to the usb common core")
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When CONFIG_USB is not set, and CONFIG_USB_GADGET is set,
there is an issue:
ld:
drivers/usb/mtu3/mtu3_debugfs.o: in function 'ssusb_debugfs_create_root':
mtu3_debugfs.c:(.text+0xba3): undefined reference to 'usb_debug_root'
usb_debug_root is only built when CONFIG_USB is enabled, so here drop it
and use NULL instead.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use devm_clk_get_optional() to get optional clock instead of
optional_clk_get() which uses devm_clk_get() to get clock and
checks for -EPROBE_DEFER but not -ENOENT as devm_clk_get_optional()
does, in fact, only ignoring -ENOENT will cover more errors, so
the replacement doesn't change original purpose.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When EXTCON is a loadable module, mtu3 fails to link as built-in:
drivers/usb/mtu3/mtu3_plat.o: In function `mtu3_probe':
mtu3_plat.c:(.text+0x690): undefined reference to `extcon_get_edev_by_phandle'
Add a Kconfig dependency to force mtu3 also to be a loadable module
if extconn is, but still allow it to be built without extcon.
Fixes: d0ed062a8b ("usb: mtu3: dual-role mode support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch implements a few initial tracepoints for the
mtu3 driver. More traces can be added as necessary in order
to ease the task of debugging.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Due to the separated debugfs files are added, move vbus and mode
debugfs interfaces related with dual-role switch from mtu3_dr.c
into mtu3_debugfs.c
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds more debugfs consumers. The debugfs entries read some
important registers, fifo status, QMU ring, endpoint status, and
IPPC probe interface to get internal status.
With these entries, users can check the registers, endpoint and
GPD used during run time.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To support USB3 Gen2 ISOC, the data buffer length need be extended,
it's hard to make the current qmu_gpd struct compatible, so here
rebuild qmu_gpd struct and make easy to support new QMU format
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
