[ Upstream commit df993fced230daa8452892406f3180c93ebf7e7b ]
The HVS can change AXI request mode based on how full the COB
FIFOs are.
Until now the vc4 driver has been relying on the firmware to
have set these to sensible values.
With HVS channel 2 now being used for live video, change the
panic mode for all channels to be explicitly set by the driver,
and the same for all channels.
Fixes: c54619b0bf ("drm/vc4: Add support for the BCM2711 HVS5")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-2-1f8e0770798b@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8514e6b1f40319e31ac4aa3fbf606796786366c9 ]
By default, the HVS driver will force the HVS output 3 to be muxed to
the HVS channel 2. However, the Transposer can only be assigned to the
HVS channel 2, so whenever we try to use the writeback connector, we'll
mux its associated output (Output 2) to the channel 2.
This leads to both the output 2 and 3 feeding from the same channel,
which is explicitly discouraged in the documentation.
In order to avoid this, let's reset all the output muxes to their reset
value.
Fixes: 87ebcd42fb ("drm/vc4: crtc: Assign output to channel automatically")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20220328153659.2382206-2-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 78e5330329ee206d6aa4593a90320fd837f7966e upstream.
LBM base address is measured in units of pixels per cycle.
That is 4 for 2711 (hvs5) and 2 for 2708.
We are wasting 75% of lbm by indexing without the scaling.
But we were also using too high a size for the lbm resulting
in partial corruption (right hand side) of vertically
scaled images, usually at 4K or lower resolutions with more layers.
The physical RAM of LBM on 2711 is 8 * 1920 * 16 * 12-bit
(pixels are stored 12-bits per component regardless of format).
The LBM address indexes work in units of pixels per clock,
so for 4 pixels per clock that means we have 32 * 1920 = 60K
Fixes: c54619b0bf ("drm/vc4: Add support for the BCM2711 HVS5")
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Tested-By: Lucas Nussbaum <lucas@debian.org>
Tested-By: Ryutaroh Matsumoto <ryutaroh@ict.e.titech.ac.jp>
Link: https://patchwork.freedesktop.org/patch/msgid/20210121105759.1262699-1-maxime@cerno.tech
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The global list of all debugfs entries for the driver was painful: the
list couldn't see into the components' structs, so each component had
its own debugs show function to find the component, then find the
regset and dump it. The components also had to be careful to check
that they were actually registered in vc4 before dereferencing
themselves, in case they weren't probed on a particular platform.
They routinely failed at that.
Instead, we can have the components add their debugfs callbacks to a
little list in vc4 to be registered at drm_dev_register() time, which
gets vc4_debugfs.c out of the business of knowing the whole list of
components.
Thanks to this change, dsi0 (if it existed) would register its node.
v2: Rebase on hvs_underrun addition.
v3: whitespace fixup
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190401183559.3823-1-eric@anholt.net
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
I had written most of my comments as if I was describing the
individual code files the way I used to for doxygen, while for RST we
want to describe things in a more chapter/section way where there's no
obvious relation to .c files.
Additionally, several of the files had stub descriptions that I've
taken this opportunity to extend.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170227201144.10970-4-eric@anholt.net
This implements a simple policy for choosing scaling modes
(trapezoidal for decimation, PPF for magnification), and a single PPF
filter (Mitchell/Netravali's recommendation).
Signed-off-by: Eric Anholt <eric@anholt.net>
So far, we've only ever lit up one CRTC, so this has been fine. To
extend to more displays or more planes, we need to make sure we don't
run our display lists into each other.
Signed-off-by: Eric Anholt <eric@anholt.net>
This is enough for fbcon and bringing up X using
xf86-video-modesetting. It doesn't support the 3D accelerator or
power management yet.
v2: Drop FB_HELPER select thanks to Archit's patches. Do manual init
ordering instead of using the .load hook. Structure registration
more like tegra's, but still using the typical "component" code.
Drop no-op hooks for atomic_begin and mode_fixup() now that
they're optional. Drop sentinel in Makefile. Fix minor style
nits I noticed on another reread.
v3: Use the new bcm2835 clk driver to manage pixel/HSM clocks instead
of having a fixed video mode. Use exynos-style component driver
matching instead of devicetree nodes to list the component driver
instances. Rename compatibility strings to say bcm2835, and
distinguish pv0/1/2. Clean up some h/vsync code, and add in
interlaced mode setup. Fix up probe/bind error paths. Use
bitops.h macros for vc4_regs.h
v4: Include i2c.h, allow building under COMPILE_TEST, drop msleep now
that other bugs have been fixed, add timeouts to cpu_relax()
loops, rename hpd-gpio to hpd-gpios.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
