[ Upstream commit 91aeaed2c1147e3b1157dc084d23f190856a6c23 ]
According to Figure 16 Turnaround Procedure on page 36 in [1], you
can see the status of LP-00 -> LP10 -> LP11. This state can correspond
to the state of DSI from LP00 -> LP11 in mtk_dsi_lane_ready function
in mtk_dsi.c.
LP-00 -> LP10 -> LP11 takes about 2*TLPX time (refer to [1] page 51
to see that TLPX is 50ns)
The delay at the end of the mtk_dsi_lane_ready function should be
greater than the 2*TLPX specified by the DSI spec, and less than
the time specified by the DSI_RX (generally 6ms to 40ms), to avoid
problems caused by the RX specification
[1]:mipi_D-PHY_specification_v1-1
Fixes: 39e8d062b03c ("drm/mediatek: Keep dsi as LP00 before dcs cmds transfer")
Signed-off-by: Xinlei Lee <xinlei.lee@mediatek.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/1673330093-6771-2-git-send-email-xinlei.lee@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 90144dd8b0d137d9e78ef34b3c418e51a49299ad ]
As the comment right before the mtk_dsi_stop() call advises,
mtk_dsi_stop() should only be called after
mtk_drm_crtc_atomic_disable(). That's because that function calls
drm_crtc_wait_one_vblank(), which requires the vblank irq to be enabled.
Previously mtk_dsi_stop(), being in mtk_dsi_poweroff() and guarded by a
refcount, would only be called at the end of
mtk_drm_crtc_atomic_disable(), through the call to mtk_crtc_ddp_hw_fini().
Commit cde7e2e35c28 ("drm/mediatek: Separate poweron/poweroff from
enable/disable and define new funcs") moved the mtk_dsi_stop() call to
mtk_output_dsi_disable(), causing it to be called before
mtk_drm_crtc_atomic_disable(), and consequently generating vblank
timeout warnings during suspend.
Move the mtk_dsi_stop() call back to mtk_dsi_poweroff() so that we have
a working vblank irq during mtk_drm_crtc_atomic_disable() and stop
getting vblank timeout warnings.
Fixes: cde7e2e35c28 ("drm/mediatek: Separate poweron/poweroff from enable/disable and define new funcs")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Link: http://lists.infradead.org/pipermail/linux-mediatek/2022-August/046713.html
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 39e8d062b03c3dc257d880d82bd55cdd9e185a3b ]
To comply with the panel sequence, hold the mipi signal to LP00 before
the dcs cmds transmission, and pull the mipi signal high from LP00 to
LP11 until the start of the dcs cmds transmission.
The normal panel timing is :
(1) pp1800 DC pull up
(2) avdd & avee AC pull high
(3) lcm_reset pull high -> pull low -> pull high
(4) Pull MIPI signal high (LP11) -> initial code -> send video data
(HS mode)
The power-off sequence is reversed.
If dsi is not in cmd mode, then dsi will pull the mipi signal high in
the mtk_output_dsi_enable function. The delay in lane_ready func is
the reaction time of dsi_rx after pulling up the mipi signal.
Fixes: 2dd8075d21 ("drm/mediatek: mtk_dsi: Use the drm_panel_bridge API")
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/1653012007-11854-4-git-send-email-xinlei.lee@mediatek.com/
Cc: <stable@vger.kernel.org> # 5.10.x: 7f6335c6a258: drm/mediatek: Modify dsi funcs to atomic operations
Cc: <stable@vger.kernel.org> # 5.10.x: cde7e2e35c28: drm/mediatek: Separate poweron/poweroff from enable/disable and define new funcs
Cc: <stable@vger.kernel.org> # 5.10.x
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: Xinlei Lee <xinlei.lee@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 81cc7e51c4f1686b71e30046437056ece6b2cb4d ]
Mipi dsi panel drivers can use mipi_dsi_dcs_{set,get}_display_brightness()
to request backlight changes.
This can be done during panel initialization (dsi is in command mode)
or afterwards (dsi is in Video Mode).
When the DSI is in Video Mode, all commands are rejected.
Detect current DSI mode in mtk_dsi_host_transfer() and switch modes
temporarily to allow commands to be sent.
Signed-off-by: Julien STEPHAN <jstephan@baylibre.com>
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
In the patch to be fixed, horizontal_backporch_byte become too large
for some panel, so roll back that patch. For small hfp or hbp panel,
using vm->hfront_porch + vm->hback_porch to calculate
horizontal_backporch_byte would make it negtive, so
use horizontal_backporch_byte itself to make it positive.
Fixes: 35bf948f1e ("drm/mediatek: dsi: Fix scrolling of panel with small hfp or hbp")
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Tested-by: Bilal Wasim <bilal.wasim@imgtec.com>
Pull drm updates from Dave Airlie:
"Not a major amount of change, the i915 trees got split into display
and gt trees to better facilitate higher level review, and there's a
major refactoring of i915 GEM locking to use more core kernel concepts
(like ww-mutexes). msm gets per-process pagetables, older AMD SI cards
get DC support, nouveau got a bump in displayport support with common
code extraction from i915.
Outside of drm this contains a couple of patches for hexint
moduleparams which you've acked, and a virtio common code tree that
you should also get via it's regular path.
New driver:
- Cadence MHDP8546 DisplayPort bridge driver
core:
- cross-driver scatterlist cleanups
- devm_drm conversions
- remove drm_dev_init
- devm_drm_dev_alloc conversion
ttm:
- lots of refactoring and cleanups
bridges:
- chained bridge support in more drivers
panel:
- misc new panels
scheduler:
- cleanup priority levels
displayport:
- refactor i915 code into helpers for nouveau
i915:
- split into display and GT trees
- WW locking refactoring in GEM
- execbuf2 extension mechanism
- syncobj timeline support
- GEN 12 HOBL display powersaving
- Rocket Lake display additions
- Disable FBC on Tigerlake
- Tigerlake Type-C + DP improvements
- Hotplug interrupt refactoring
amdgpu:
- Sienna Cichlid updates
- Navy Flounder updates
- DCE6 (SI) support for DC
- Plane rotation enabled
- TMZ state info ioctl
- PCIe DPC recovery support
- DC interrupt handling refactor
- OLED panel fixes
amdkfd:
- add SMI events for thermal throttling
- SMI interface events ioctl update
- process eviction counters
radeon:
- move to dma_ for allocations
- expose sclk via sysfs
msm:
- DSI support for sm8150/sm8250
- per-process GPU pagetable support
- Displayport support
mediatek:
- move HDMI phy driver to PHY
- convert mtk-dpi to bridge API
- disable mt2701 tmds
tegra:
- bridge support
exynos:
- misc cleanups
vc4:
- dual display cleanups
ast:
- cleanups
gma500:
- conversion to GPIOd API
hisilicon:
- misc reworks
ingenic:
- clock handling and format improvements
mcde:
- DSI support
mgag200:
- desktop g200 support
mxsfb:
- i.MX7 + i.MX8M
- alpha plane support
panfrost:
- devfreq support
- amlogic SoC support
ps8640:
- EDID from eDP retrieval
tidss:
- AM65xx YUV workaround
virtio:
- virtio-gpu exported resources
rcar-du:
- R8A7742, R8A774E1 and R8A77961 support
- YUV planar format fixes
- non-visible plane handling
- VSP device reference count fix
- Kconfig fix to avoid displaying disabled options in .config"
* tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drm: (1494 commits)
drm/ingenic: Fix bad revert
drm/amdgpu: Fix invalid number of character '{' in amdgpu_acpi_init
drm/amdgpu: Remove warning for virtual_display
drm/amdgpu: kfd_initialized can be static
drm/amd/pm: setup APU dpm clock table in SMU HW initialization
drm/amdgpu: prevent spurious warning
drm/amdgpu/swsmu: fix ARC build errors
drm/amd/display: Fix OPTC_DATA_FORMAT programming
drm/amd/display: Don't allow pstate if no support in blank
drm/panfrost: increase readl_relaxed_poll_timeout values
MAINTAINERS: Update entry for st7703 driver after the rename
Revert "gpu/drm: ingenic: Add option to mmap GEM buffers cached"
drm/amd/display: HDMI remote sink need mode validation for Linux
drm/amd/display: Change to correct unit on audio rate
drm/amd/display: Avoid set zero in the requested clk
drm/amdgpu: align frag_end to covered address space
drm/amdgpu: fix NULL pointer dereference for Renoir
drm/vmwgfx: fix regression in thp code due to ttm init refactor.
drm/amdgpu/swsmu: add interrupt work handler for smu11 parts
drm/amdgpu/swsmu: add interrupt work function
...
For current mediatek dsi encoder, its possible crtc is fixed in crtc
0, and mediatek dpi encoder's possible crtc is fixed in crtc 1. In
some SoC the possible crtc is not fixed in this case, so search
pipeline information to find out the correct possible crtc.
Signed-off-by: Stu Hsieh <stu.hsieh@mediatek.com>
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
horizontal_backporch_byte should be hbp * bpp - hbp extra bytes.
So remove the wrong subtraction 10.
Fixes: 7a5bc4e22e ("drm/mediatek: change the dsi phytiming calculate method")
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Use the drm_bridge_connector helper to create a connector for pipelines
that use drm_bridge. This allows splitting connector operations across
multiple bridges when necessary, instead of having the last bridge in
the chain creating the connector and handling all connector operations
internally.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Replace the manual panel handling code by a drm_panel_bridge. This
simplifies the driver and allows all components in the display pipeline
to be treated as bridges, paving the way to generic connector handling.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Convert mtk_dsi to a bridge driver with built-in encoder support for
compatibility with existing component drivers.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
This is really a cosmetic change just to make a bit more readable the
code after convert the driver to drm_bridge. The bridge variable name
will be used by the encoder drm_bridge, and the chained bridge will be
named next_bridge.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
In function mtk_dsi_clk_hs_state, remove unnecessary conversion
to bool return, this change is to make the code a bit readable.
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Pull ARM/SoC driver updates from Arnd Bergmann:
"These are updates to SoC specific drivers that did not have another
subsystem maintainer tree to go through for some reason:
- Some bus and memory drivers for the MIPS P5600 based Baikal-T1 SoC
that is getting added through the MIPS tree.
- There are new soc_device identification drivers for TI K3, Qualcomm
MSM8939
- New reset controller drivers for NXP i.MX8MP, Renesas RZ/G1H, and
Hisilicon hi6220
- The SCMI firmware interface can now work across ARM SMC/HVC as a
transport.
- Mediatek platforms now use a new driver for their "MMSYS" hardware
block that controls clocks and some other aspects in behalf of the
media and gpu drivers.
- Some Tegra processors have improved power management support,
including getting woken up by the PMIC and cluster power down
during idle.
- A new v4l staging driver for Tegra is added.
- Cleanups and minor bugfixes for TI, NXP, Hisilicon, Mediatek, and
Tegra"
* tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (155 commits)
clk: sprd: fix compile-testing
bus: bt1-axi: Build the driver into the kernel
bus: bt1-apb: Build the driver into the kernel
bus: bt1-axi: Use sysfs_streq instead of strncmp
bus: bt1-axi: Optimize the return points in the driver
bus: bt1-apb: Use sysfs_streq instead of strncmp
bus: bt1-apb: Use PTR_ERR_OR_ZERO to return from request-regs method
bus: bt1-apb: Fix show/store callback identations
bus: bt1-apb: Include linux/io.h
dt-bindings: memory: Add Baikal-T1 L2-cache Control Block binding
memory: Add Baikal-T1 L2-cache Control Block driver
bus: Add Baikal-T1 APB-bus driver
bus: Add Baikal-T1 AXI-bus driver
dt-bindings: bus: Add Baikal-T1 APB-bus binding
dt-bindings: bus: Add Baikal-T1 AXI-bus binding
staging: tegra-video: fix V4L2 dependency
tee: fix crypto select
drivers: soc: ti: knav_qmss_queue: Make knav_gp_range_ops static
soc: ti: add k3 platforms chipid module driver
dt-bindings: soc: ti: add binding for k3 platforms chipid module
...
It can happen that the mmsys clock drivers aren't probed before the
platform driver gets invoked. The platform driver used to print a warning
that the driver failed to get the clocks. Omit this error on
the defered probe path.
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Most bridge drivers create a DRM connector to model the connector at the
output of the bridge. This model is historical and has worked pretty
well so far, but causes several issues:
- It prevents supporting more complex display pipelines where DRM
connector operations are split over multiple components. For instance a
pipeline with a bridge connected to the DDC signals to read EDID data,
and another one connected to the HPD signal to detect connection and
disconnection, will not be possible to support through this model.
- It requires every bridge driver to implement similar connector
handling code, resulting in code duplication.
- It assumes that a bridge will either be wired to a connector or to
another bridge, but doesn't support bridges that can be used in both
positions very well (although there is some ad-hoc support for this in
the analogix_dp bridge driver).
In order to solve these issues, ownership of the connector should be
moved to the display controller driver (where it can be implemented
using helpers provided by the core).
Extend the bridge API to allow disabling connector creation in bridge
drivers as a first step towards the new model. The new flags argument to
the bridge .attach() operation allows instructing the bridge driver to
skip creating a connector. Unconditionally set the new flags argument to
0 for now to keep the existing behaviour, and modify all existing bridge
drivers to return an error when connector creation is not requested as
they don't support this feature yet.
The change is based on the following semantic patch, with manual review
and edits.
@ rule1 @
identifier funcs;
identifier fn;
@@
struct drm_bridge_funcs funcs = {
...,
.attach = fn
};
@ depends on rule1 @
identifier rule1.fn;
identifier bridge;
statement S, S1;
@@
int fn(
struct drm_bridge *bridge
+ , enum drm_bridge_attach_flags flags
)
{
... when != S
+ if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) {
+ DRM_ERROR("Fix bridge driver to make connector optional!");
+ return -EINVAL;
+ }
+
S1
...
}
@ depends on rule1 @
identifier rule1.fn;
identifier bridge, flags;
expression E1, E2, E3;
@@
int fn(
struct drm_bridge *bridge,
enum drm_bridge_attach_flags flags
) {
<...
drm_bridge_attach(E1, E2, E3
+ , flags
)
...>
}
@@
expression E1, E2, E3;
@@
drm_bridge_attach(E1, E2, E3
+ , 0
)
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-10-laurent.pinchart@ideasonboard.com
There are some extra data transfer in dsi.
ex. LPX, hs_prepare, hs_zero, hs_exit and the sof/eof of dsi packet.
This signal will enlarge the line time. So the real frame on dsi bus
will be lower than calc by video timing.
So dsi driver reduces the hbp and hfp to keep the line time.
Fixes: 7a5bc4e22e ("drm/mediatek: change the dsi phytiming calculate method")
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Change the method of frame rate calc which can get more accurate
frame rate.
data rate = pixel_clock * bit_per_pixel / lanes
Adjust hfp_wc to adapt the additional phy_data
if MIPI_DSI_MODE_VIDEO_BURST
hfp_wc = hfp * bpp - data_phy_cycles * lanes - 12 - 6;
else
hfp_wc = hfp * bpp - data_phy_cycles * lanes - 12;
Note:
//(2: 1 for sync, 1 for phy idle)
data_phy_cycles = T_hs_exit + T_lpx + T_hs_prepare + T_hs_zero + 2;
bpp: bit per pixel
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Tested-by: Ryan Case <ryandcase@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Add mt8183 dsi driver data. Enable size control and
reg commit control.
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Our new DSI chip has frame size control.
So add the driver data to control for different chips.
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
New DSI IP has shadow register and working reg. The register
values are writen to shadow register. And then trigger with
commit reg, the register values will be moved working register.
This function is default on. But this driver doesn't use this
function. So add the disable control.
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
The writeb() is unavailable in mt8173. Because the mt8173 dsi module
doesn't support 8bit mode access.
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
DSI panel driver need attach function which is include in
mipi_dsi_host_ops.
If mipi_dsi_host_register is not in probe, dsi panel will
probe more delay.
So move the mipi_dsi_host_register to probe from bind.
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
mtk_dsi_stop() should be called after mtk_drm_crtc_atomic_disable(), which
needs ovl irq for drm_crtc_wait_one_vblank(), since after mtk_dsi_stop() is
called, ovl irq will be disabled. If drm_crtc_wait_one_vblank() is called
after last irq, it will timeout with this message: "vblank wait timed out
on crtc 0". This happens sometimes when turning off the screen.
In drm_atomic_helper.c#disable_outputs(),
the calling sequence when turning off the screen is:
1. mtk_dsi_encoder_disable()
--> mtk_output_dsi_disable()
--> mtk_dsi_stop(); /* sometimes make vblank timeout in
atomic_disable */
--> mtk_dsi_poweroff();
2. mtk_drm_crtc_atomic_disable()
--> drm_crtc_wait_one_vblank();
...
--> mtk_dsi_ddp_stop()
--> mtk_dsi_poweroff();
mtk_dsi_poweroff() has reference count design, change to make
mtk_dsi_stop() called in mtk_dsi_poweroff() when refcount is 0.
Fixes: 0707632b5b ("drm/mediatek: update DSI sub driver flow for sending commands to panel")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
detatch panel in mtk_dsi_destroy_conn_enc(), since .bind will try to
attach it again.
Fixes: 2e54c14e31 ("drm/mediatek: Add DSI sub driver")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 655 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Even if dsi->bridge is NULL, we still try to call drm_bridge_attach,
and print out an error message, before creating the connector.
When no bridge is provided, let's skip these 2 steps and directly
create the connector.
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
This patch uses existing method drm_display_mode_to_videomode for
calculating front/back porches, sync lengths for mediatek dsi/dpi
drivers; instead of manually calculating them
Signed-off-by: Satendra Singh Thakur <thakursatendra2003@yahoo.co.in>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
The current message contains a spelling mistake and is not easily
parsable. Re-phrase it to be more understandable.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
This code causes a static checker warning because it treats "i == 0" as
a timeout but, because it's a post-op, the loop actually ends with "i"
set to -1. Philipp Zabel points out that it would be cleaner to use
readl_poll_timeout() instead.
Fixes: 2189881683 ("drm/mediatek: add dsi transfer function")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Last drm-misc-next pull req for 4.12
Core changes:
- fb_helper checkpatch cleanup and simplified _add_one_connector() (Thierry)
- drm_ioctl and drm_sysfs improved/gained documentation (Daniel)
- [ABI] Repurpose reserved field in drm_event_vblank for crtc_id (Ander)
- Plumb acquire ctx through legacy paths to avoid lock_all and legacy_backoff
(Daniel)
- Add connector_atomic_check to check conn constraints on modeset (Maarten)
- Add drm_of_find_panel_or_bridge to remove boilerplate in drivers (Rob)
Driver changes:
- meson moved to drm-misc (Neil)
- Added support for Amlogic GX SoCs in dw-hdmi (Neil)
- Rockchip unbind actually cleans up the things bind initializes (Jeffy)
- A couple misc fixes in virtio, dw-hdmi
NOTE: this also includes a backmerge of drm-next as well rc5 (we needed vmwgfx
as well as the new synopsys media formats)
* tag 'drm-misc-next-2017-04-07' of git://anongit.freedesktop.org/git/drm-misc: (77 commits)
Revert "drm: Don't allow interruptions when opening debugfs/crc"
drm: Only take cursor locks when the cursor plane exists
drm/vmwgfx: Fix fbdev emulation using legacy functions
drm/rockchip: Shutdown all crtcs when unbinding drm
drm/rockchip: Reorder drm bind/unbind sequence
drm/rockchip: analogix_dp: Disable clock when unbinding
drm/rockchip: vop: Unprepare clocks when unbinding
drm/rockchip: vop: Enable pm domain before vop_initial
drm/rockchip: cdn-dp: Don't unregister audio dev when unbinding
drm/rockchip: cdn-dp: Don't try to release firmware when not loaded
drm: bridge: analogix: Destroy connector & encoder when unbinding
drm: bridge: analogix: Disable clock when unbinding
drm: bridge: analogix: Unregister dp aux when unbinding
drm: bridge: analogix: Detach panel when unbinding analogix dp
drm: Don't allow interruptions when opening debugfs/crc
drm/virtio: don't leak bo on drm_gem_object_init failure
drm: bridge: dw-hdmi: fix input format/encoding from plat_data
drm: omap: use common OF graph helpers
drm: convert drivers to use drm_of_find_panel_or_bridge
drm: convert drivers to use of_graph_get_remote_node
...
This patch add support for the Mediatek MT2701 DISP subsystem.
There is only one OVL engine in MT2701.
Signed-off-by: YT Shen <yt.shen@mediatek.com>
Acked-by: CK Hu <ck.hu@mediatek.com>
