[ Upstream commit afda85b963c12947e298ad85d757e333aa40fd74 ]
If device_register() returns error in ibmebus_bus_init(), name of kobject
which is allocated in dev_set_name() called in device_add() is leaked.
As comment of device_add() says, it should call put_device() to drop
the reference count that was set in device_initialize() when it fails,
so the name can be freed in kobject_cleanup().
Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20221110011929.3709774-1-ruanjinjie@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eac030b22ea12cdfcbb2e941c21c03964403c63f ]
lppaca_shared_proc() takes a pointer to the lppaca which is typically
accessed through get_lppaca(). With DEBUG_PREEMPT enabled, this leads
to checking if preemption is enabled, for example:
BUG: using smp_processor_id() in preemptible [00000000] code: grep/10693
caller is lparcfg_data+0x408/0x19a0
CPU: 4 PID: 10693 Comm: grep Not tainted 6.5.0-rc3 #2
Call Trace:
dump_stack_lvl+0x154/0x200 (unreliable)
check_preemption_disabled+0x214/0x220
lparcfg_data+0x408/0x19a0
...
This isn't actually a problem however, as it does not matter which
lppaca is accessed, the shared proc state will be the same.
vcpudispatch_stats_procfs_init() already works around this by disabling
preemption, but the lparcfg code does not, erroring any time
/proc/powerpc/lparcfg is accessed with DEBUG_PREEMPT enabled.
Instead of disabling preemption on the caller side, rework
lppaca_shared_proc() to not take a pointer and instead directly access
the lppaca, bypassing any potential preemption checks.
Fixes: f13c13a005 ("powerpc: Stop using non-architected shared_proc field in lppaca")
Signed-off-by: Russell Currey <ruscur@russell.cc>
[mpe: Rework to avoid needing a definition in paca.h and lppaca.h]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230823055317.751786-4-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4f913c980bc6abe0ccfe88fe3909c125afe4a2d ]
Currently pointer iov is being dereferenced before the null check of iov
which can lead to null pointer dereference errors. Fix this by moving the
iov null check before the dereferencing.
Detected using cppcheck static analysis:
linux/arch/powerpc/platforms/powernv/pci-sriov.c:597:12: warning: Either
the condition '!iov' is redundant or there is possible null pointer
dereference: iov. [nullPointerRedundantCheck]
num_vfs = iov->num_vfs;
^
Fixes: 052da31d45 ("powerpc/powernv/sriov: De-indent setup and teardown")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230608095849.1147969-1-colin.i.king@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b69600d4da0049244e9be2f5ef5a2f8e04fcd9a ]
Use "%pa" format specifier for resource_size_t to avoid compiler
printk format warnings.
../arch/powerpc/platforms/embedded6xx/flipper-pic.c: In function 'flipper_pic_init':
../include/linux/kern_levels.h:5:25: error: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' {aka 'long long unsigned int'} [-Werror=format=]
../arch/powerpc/platforms/embedded6xx/flipper-pic.c:148:9: note: in expansion of macro 'pr_info'
148 | pr_info("controller at 0x%08x mapped to 0x%p\n", res.start, io_base);
| ^~~~~~~
../arch/powerpc/platforms/embedded6xx/hlwd-pic.c: In function 'hlwd_pic_init':
../include/linux/kern_levels.h:5:25: error: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' {aka 'long long unsigned int'} [-Werror=format=]
../arch/powerpc/platforms/embedded6xx/hlwd-pic.c:174:9: note: in expansion of macro 'pr_info'
174 | pr_info("controller at 0x%08x mapped to 0x%p\n", res.start, io_base);
| ^~~~~~~
../arch/powerpc/platforms/embedded6xx/wii.c: In function 'wii_ioremap_hw_regs':
../include/linux/kern_levels.h:5:25: error: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'resource_size_t' {aka 'long long unsigned int'} [-Werror=format=]
../arch/powerpc/platforms/embedded6xx/wii.c:77:17: note: in expansion of macro 'pr_info'
77 | pr_info("%s at 0x%08x mapped to 0x%p\n", name,
| ^~~~~~~
Fixes: 028ee972f0 ("powerpc: gamecube/wii: flipper interrupt controller support")
Fixes: 9c21025c78 ("powerpc: wii: hollywood interrupt controller support")
Fixes: 5a7ee3198d ("powerpc: wii: platform support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230223070116.660-3-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7538c97e2b80ff6b7a8ea2ecf16a04355461b439 ]
Use "%pa" format specifier for resource_size_t to avoid a compiler
printk format warning.
../arch/powerpc/platforms/512x/clock-commonclk.c: In function 'mpc5121_clk_provide_backwards_compat':
../arch/powerpc/platforms/512x/clock-commonclk.c:989:44: error: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' {aka 'long long unsigned int'} [-Werror=format=]
989 | snprintf(devname, sizeof(devname), "%08x.%s", res.start, np->name); \
| ^~~~~~~~~ ~~~~~~~~~
| |
| resource_size_t {aka long long unsigned int}
Prevents 24 such warnings.
Fixes: 01f25c3716 ("clk: mpc512x: add backwards compat to the CCF code")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230223070116.660-2-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b277fc793daf258877b4c0744b52f69d6e6ba22e ]
Platform device helper routines won't update the NUMA distance table
while creating a platform device, even if the device is present on a
NUMA node that doesn't have memory or CPU. This is especially true for
pmem devices. If the target node of the pmem device is not online, we
find the nearest online node to the device and associate the pmem device
with that online node. To find the nearest online node, we should have
the numa distance table updated correctly. Update the distance
information during the device probe.
For a papr scm device on NUMA node 3 distance_lookup_table value for
distance_ref_points_depth = 2 before and after fix is below:
Before fix:
node 3 distance depth 0 - 0
node 3 distance depth 1 - 0
node 4 distance depth 0 - 4
node 4 distance depth 1 - 2
node 5 distance depth 0 - 5
node 5 distance depth 1 - 1
After fix
node 3 distance depth 0 - 3
node 3 distance depth 1 - 1
node 4 distance depth 0 - 4
node 4 distance depth 1 - 2
node 5 distance depth 0 - 5
node 5 distance depth 1 - 1
Without the fix, the nearest numa node to the pmem device (NUMA node 3)
will be picked as 4. After the fix, we get the correct numa node which
is 5.
Fixes: da1115fdbd ("powerpc/nvdimm: Pick nearby online node if the device node is not online")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230404041433.1781804-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c6b5a7e74052768977855f95d6b8812f6e7772c ]
PAPR interface currently supports two different ways of communicating resource
grouping details to the OS. These are referred to as Form 0 and Form 1
associativity grouping. Form 0 is the older format and is now considered
deprecated. This patch adds another resource grouping named FORM2.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210812132223.225214-6-aneesh.kumar@linux.ibm.com
Stable-dep-of: b277fc793daf ("powerpc/papr_scm: Update the NUMA distance table for the target node")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef31cb83d19c4c589d650747cd5a7e502be9f665 ]
This helper is only used with the dispatch trace log collection.
A later patch will add Form2 affinity support and this change helps
in keeping that simpler. Also add a comment explaining we don't expect
the code to be called with FORM0
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210812132223.225214-5-aneesh.kumar@linux.ibm.com
Stable-dep-of: b277fc793daf ("powerpc/papr_scm: Update the NUMA distance table for the target node")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ddc6448ec5a5ef50eaa581a7dec0e12a02850ff ]
The associativity details of the newly added resourced are collected from
the hypervisor via "ibm,configure-connector" rtas call. Update the numa
distance details of the newly added numa node after the above call.
Instead of updating NUMA distance every time we lookup a node id
from the associativity property, add helpers that can be used
during boot which does this only once. Also remove the distance
update from node id lookup helpers.
Currently, we duplicate parsing code for ibm,associativity and
ibm,associativity-lookup-arrays in the kernel. The associativity array provided
by these device tree properties are very similar and hence can use
a helper to parse the node id and numa distance details.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210812132223.225214-4-aneesh.kumar@linux.ibm.com
Stable-dep-of: b277fc793daf ("powerpc/papr_scm: Update the NUMA distance table for the target node")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5d08633e5f6564b60f1cbe09af3af40a74d66431 ]
The ibm,get-system-parameter RTAS function may return -2 or 990x,
which indicate that the caller should try again.
lparcfg's parse_system_parameter_string() ignores this, making it
possible to intermittently report incorrect SPLPAR characteristics.
Move the RTAS call into a coventional rtas_busy_delay()-based loop.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-4-26929c8cce78@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit daa8ab59044610aa8ef2ee45a6c157b5e11635e9 ]
The ibm,get-system-parameter RTAS function may return -2 or 990x,
which indicate that the caller should try again.
pseries_lpar_read_hblkrm_characteristics() ignores this, making it
possible to incorrectly detect TLB block invalidation characteristics
at boot.
Move the RTAS call into a coventional rtas_busy_delay()-based loop.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Fixes: 1211ee61b4 ("powerpc/pseries: Read TLB Block Invalidate Characteristics")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-3-26929c8cce78@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e64e71056f323a1e178dccf04d4c0f032d84436c ]
pnv_ioda_setup_pe_res() calls opal to map a resource with a PE. However,
the code assumes the resource is allocated and it uses the resource
address to find out the segment(s) which need to be mapped to the
PE. In the unlikely case where the resource hasn't been allocated, the
computation for the segment number is garbage, which can lead to
invalid memory access and potentially a kernel crash, such as:
[ ] pci_bus 0002:02: Configuring PE for bus
[ ] pci 0002:02 : [PE# fc] Secondary bus 0x0000000000000002..0x0000000000000002 associated with PE#fc
[ ] BUG: Kernel NULL pointer dereference on write at 0x00000000
[ ] Faulting instruction address: 0xc00000000005eac4
[ ] Oops: Kernel access of bad area, sig: 7 [#1]
[ ] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV
[ ] Modules linked in:
[ ] CPU: 12 PID: 1 Comm: swapper/20 Not tainted 5.10.50-openpower1 #2
[ ] NIP: c00000000005eac4 LR: c00000000005ea44 CTR: 0000000030061b9c
[ ] REGS: c000200007383650 TRAP: 0300 Not tainted (5.10.50-openpower1)
[ ] MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 44000224 XER: 20040000
[ ] CFAR: c00000000005eaa0 DAR: 0000000000000000 DSISR: 02080000 IRQMASK: 0
[ ] GPR00: c00000000005dd98 c0002000073838e0 c00000000185de00 c000200fff018960
[ ] GPR04: 00000000000000fc 0000000000000003 0000000000000000 0000000000000000
[ ] GPR08: 0000000000000000 0000000000000000 0000000000000000 9000000000001033
[ ] GPR12: 0000000031cb0000 c000000ffffe6a80 c000000000010a58 0000000000000000
[ ] GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ ] GPR20: 0000000000000000 0000000000000000 0000000000000000 c00000000711e200
[ ] GPR24: 0000000000000100 c000200009501120 c00020000cee2800 00000000000003ff
[ ] GPR28: c000200fff018960 0000000000000000 c000200ffcb7fd00 0000000000000000
[ ] NIP [c00000000005eac4] pnv_ioda_setup_pe_res+0x94/0x1a0
[ ] LR [c00000000005ea44] pnv_ioda_setup_pe_res+0x14/0x1a0
[ ] Call Trace:
[ ] [c0002000073838e0] [c00000000005eb98] pnv_ioda_setup_pe_res+0x168/0x1a0 (unreliable)
[ ] [c000200007383970] [c00000000005dd98] pnv_pci_ioda_dma_dev_setup+0x43c/0x970
[ ] [c000200007383a60] [c000000000032cdc] pcibios_bus_add_device+0x78/0x18c
[ ] [c000200007383aa0] [c00000000028f2bc] pci_bus_add_device+0x28/0xbc
[ ] [c000200007383b10] [c00000000028f3a0] pci_bus_add_devices+0x50/0x7c
[ ] [c000200007383b50] [c00000000028f3c4] pci_bus_add_devices+0x74/0x7c
[ ] [c000200007383b90] [c00000000028f3c4] pci_bus_add_devices+0x74/0x7c
[ ] [c000200007383bd0] [c00000000069ad0c] pcibios_init+0xf0/0x104
[ ] [c000200007383c50] [c0000000000106d8] do_one_initcall+0x84/0x1c4
[ ] [c000200007383d20] [c0000000006910b8] kernel_init_freeable+0x264/0x268
[ ] [c000200007383dc0] [c000000000010a68] kernel_init+0x18/0x138
[ ] [c000200007383e20] [c00000000000cbfc] ret_from_kernel_thread+0x5c/0x80
[ ] Instruction dump:
[ ] 7f89e840 409d000c 7fbbf840 409c000c 38210090 4848f448 809c002c e95e0120
[ ] 7ba91764 38a00003 57a7043e 38c00000 <7c8a492e> 5484043e e87e0018 4bff23bd
Hitting the problem is not that easy. It was seen with a (semi-bogus)
PCI device with a class code of 0. The generic PCI framework doesn't
allocate resources in such a case.
The patch is simply skipping resources which are still flagged with
IORESOURCE_UNSET.
We don't have the problem with 64-bit mem resources, as the address of
the resource is checked to be within the range of the 64-bit mmio
window. See pnv_ioda_reserve_dev_m64_pe() and pnv_pci_is_m64().
Reported-by: Andrew Jeffery <andrew@aj.id.au>
Fixes: 23e79425fe ("powerpc/powernv: Simplify pnv_ioda_setup_pe_seg()")
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230120093215.19496-1-fbarrat@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9aafbfa5f57a4b75bafd3bed0191e8429c5fa618 ]
rtas-error-log-max is not the name of an RTAS function, so rtas_token()
is not the appropriate API for retrieving its value. We already have
rtas_get_error_log_max() which returns a sensible value if the property
is absent for any reason, so use that instead.
Fixes: 8d633291b4 ("powerpc/eeh: pseries platform EEH error log retrieval")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
[mpe: Drop no-longer possible error handling as noticed by ajd]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221118150751.469393-6-nathanl@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 319fa1a52e438a6e028329187783a25ad498c4e6 ]
On VMs with NX encryption, compression, and/or RNG offload, these
capabilities are described by nodes in the ibm,platform-facilities device
tree hierarchy:
$ tree -d /sys/firmware/devicetree/base/ibm,platform-facilities/
/sys/firmware/devicetree/base/ibm,platform-facilities/
├── ibm,compression-v1
├── ibm,random-v1
└── ibm,sym-encryption-v1
3 directories
The acceleration functions that these nodes describe are not disrupted by
live migration, not even temporarily.
But the post-migration ibm,update-nodes sequence firmware always sends
"delete" messages for this hierarchy, followed by an "add" directive to
reconstruct it via ibm,configure-connector (log with debugging statements
enabled in mobility.c):
mobility: removing node /ibm,platform-facilities/ibm,random-v1:4294967285
mobility: removing node /ibm,platform-facilities/ibm,compression-v1:4294967284
mobility: removing node /ibm,platform-facilities/ibm,sym-encryption-v1:4294967283
mobility: removing node /ibm,platform-facilities:4294967286
...
mobility: added node /ibm,platform-facilities:4294967286
Note we receive a single "add" message for the entire hierarchy, and what
we receive from the ibm,configure-connector sequence is the top-level
platform-facilities node along with its three children. The debug message
simply reports the parent node and not the whole subtree.
Also, significantly, the nodes added are almost completely equivalent to
the ones removed; even phandles are unchanged. ibm,shared-interrupt-pool in
the leaf nodes is the only property I've observed to differ, and Linux does
not use that. So in practice, the sum of update messages Linux receives for
this hierarchy is equivalent to minor property updates.
We succeed in removing the original hierarchy from the device tree. But the
vio bus code is ignorant of this, and does not unbind or relinquish its
references. The leaf nodes, still reachable through sysfs, of course still
refer to the now-freed ibm,platform-facilities parent node, which makes
use-after-free possible:
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 3 PID: 1706 at lib/refcount.c:25 refcount_warn_saturate+0x164/0x1f0
refcount_warn_saturate+0x160/0x1f0 (unreliable)
kobject_get+0xf0/0x100
of_node_get+0x30/0x50
of_get_parent+0x50/0xb0
of_fwnode_get_parent+0x54/0x90
fwnode_count_parents+0x50/0x150
fwnode_full_name_string+0x30/0x110
device_node_string+0x49c/0x790
vsnprintf+0x1c0/0x4c0
sprintf+0x44/0x60
devspec_show+0x34/0x50
dev_attr_show+0x40/0xa0
sysfs_kf_seq_show+0xbc/0x200
kernfs_seq_show+0x44/0x60
seq_read_iter+0x2a4/0x740
kernfs_fop_read_iter+0x254/0x2e0
new_sync_read+0x120/0x190
vfs_read+0x1d0/0x240
Moreover, the "new" replacement subtree is not correctly added to the
device tree, resulting in ibm,platform-facilities parent node without the
appropriate leaf nodes, and broken symlinks in the sysfs device hierarchy:
$ tree -d /sys/firmware/devicetree/base/ibm,platform-facilities/
/sys/firmware/devicetree/base/ibm,platform-facilities/
0 directories
$ cd /sys/devices/vio ; find . -xtype l -exec file {} +
./ibm,sym-encryption-v1/of_node: broken symbolic link to
../../../firmware/devicetree/base/ibm,platform-facilities/ibm,sym-encryption-v1
./ibm,random-v1/of_node: broken symbolic link to
../../../firmware/devicetree/base/ibm,platform-facilities/ibm,random-v1
./ibm,compression-v1/of_node: broken symbolic link to
../../../firmware/devicetree/base/ibm,platform-facilities/ibm,compression-v1
This is because add_dt_node() -> dlpar_attach_node() attaches only the
parent node returned from configure-connector, ignoring any children. This
should be corrected for the general case, but fixing that won't help with
the stale OF node references, which is the more urgent problem.
One way to address that would be to make the drivers respond to node
removal notifications, so that node references can be dropped
appropriately. But this would likely force the drivers to disrupt active
clients for no useful purpose: equivalent nodes are immediately re-added.
And recall that the acceleration capabilities described by the nodes remain
available throughout the whole process.
The solution I believe to be robust for this situation is to convert
remove+add of a node with an unchanged phandle to an update of the node's
properties in the Linux device tree structure. That would involve changing
and adding a fair amount of code, and may take several iterations to land.
Until that can be realized we have a confirmed use-after-free and the
possibility of memory corruption. So add a limited workaround that
discriminates on the node type, ignoring adds and removes. This should be
amenable to backporting in the meantime.
Fixes: 410bccf978 ("powerpc/pseries: Partition migration in the kernel")
Cc: stable@vger.kernel.org
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211020194703.2613093-1-nathanl@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2efd7f6eb9b7107e469837d8452e750d7d080a5d ]
In pseries_devicetree_update(), with each call to ibm,update-nodes the
partition firmware communicates the node to be deleted or updated by
placing its phandle in the work buffer. Each of delete_dt_node(),
update_dt_node(), and add_dt_node() have duplicate lookups using the
phandle value and corresponding refcount management.
Move the lookup and of_node_put() into pseries_devicetree_update(),
and emit a warning on any failed lookups.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-29-nathanl@linux.ibm.com
Stable-dep-of: 319fa1a52e43 ("powerpc/pseries/mobility: ignore ibm, platform-facilities updates")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 446cda1b21d9a6b3697fe399c6a3a00ff4a285f5 ]
Since commit 4bf4f42a2f ("powerpc/kbuild: Set default generic
machine type for 32-bit compile"), when building a 32 bits kernel
with a bi-arch version of GCC, or when building a book3s/32 kernel,
the option -mcpu=powerpc is passed to GCC at all time, relying on it
being eventually overriden by a subsequent -mcpu=xxxx.
But when building the same kernel with a 32 bits only version of GCC,
that is not done, relying on gcc being built with the expected default
CPU.
This logic has two problems. First, it is a bit fragile to rely on
whether the GCC version is bi-arch or not, because today we can have
bi-arch versions of GCC configured with a 32 bits default. Second,
there are some versions of GCC which don't support -mcpu=powerpc,
for instance for e500 SPE-only versions.
So, stop relying on this approximative logic and allow the user to
decide whether he/she wants to use the toolchain's default CPU or if
he/she wants to set one, and allow only possible CPUs based on the
selected target.
Reported-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d4df724691351531bf46d685d654689e5dfa0d74.1657549153.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit df5d4b616ee76abc97e5bd348e22659c2b095b1c ]
of_get_next_parent() returns a node pointer with refcount incremented,
we should use of_node_put() on it when not need anymore.
Add missing of_node_put() in the error path to avoid refcount leak.
Fixes: ce21b3c964 ("[CELL] add support for MSI on Axon-based Cell systems")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220605065129.63906-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ac059dacffa8ab2f7798f20e4bd3333890c541c ]
of_find_node_by_path() returns remote device nodepointer with
refcount incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak.
Fixes: 0afacde3df ("[POWERPC] spufs: allow isolated mode apps by starting the SPE loader")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220603121543.22884-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9be013b2a9ecb29b5168e4b9db0e48ed53acf37c ]
Commit 0e00a8c9fd ("powerpc: Allow CPU selection also on PPC32")
enlarged the CPU selection logic to PPC32 by removing depend to
PPC64, and failed to restrict that depend to E5500_CPU and E6500_CPU.
Fortunately that got unnoticed because -mcpu=8540 will override the
-mcpu=e500mc64 or -mpcu=e6500 as they are ealier, but that's
fragile and may no be right in the future.
Add back the depend PPC64 on E5500_CPU and E6500_CPU.
Fixes: 0e00a8c9fd ("powerpc: Allow CPU selection also on PPC32")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8abab4888da69ff78b73a56f64d9678a7bf684e9.1657549153.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 90b5d4fe0b3ba7f589c6723c6bfb559d9e83956a upstream.
On a bare-metal Power8 system that doesn't have an "ibm,power-rng", a
malicious QEMU and guest that ignore the absence of the
KVM_CAP_PPC_HWRNG flag, and calls H_RANDOM anyway, will dereference a
NULL pointer.
In practice all Power8 machines have an "ibm,power-rng", but let's not
rely on that, add a NULL check and early return in
powernv_get_random_real_mode().
Fixes: e928e9cb36 ("KVM: PPC: Book3S HV: Add fast real-mode H_RANDOM implementation.")
Cc: stable@vger.kernel.org # v4.1+
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220727143219.2684192-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 887502826549caa7e4215fd9e628f48f14c0825a upstream.
The platform device for the rng must be created much later in boot.
Otherwise it tries to connect to a parent that doesn't yet exist,
resulting in this splat:
[ 0.000478] kobject: '(null)' ((____ptrval____)): is not initialized, yet kobject_get() is being called.
[ 0.002925] [c000000002a0fb30] [c00000000073b0bc] kobject_get+0x8c/0x100 (unreliable)
[ 0.003071] [c000000002a0fba0] [c00000000087e464] device_add+0xf4/0xb00
[ 0.003194] [c000000002a0fc80] [c000000000a7f6e4] of_device_add+0x64/0x80
[ 0.003321] [c000000002a0fcb0] [c000000000a800d0] of_platform_device_create_pdata+0xd0/0x1b0
[ 0.003476] [c000000002a0fd00] [c00000000201fa44] pnv_get_random_long_early+0x240/0x2e4
[ 0.003623] [c000000002a0fe20] [c000000002060c38] random_init+0xc0/0x214
This patch fixes the issue by doing the platform device creation inside
of machine_subsys_initcall.
Fixes: f3eac426657d ("powerpc/powernv: wire up rng during setup_arch")
Cc: stable@vger.kernel.org
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
[mpe: Change "of node" to "platform device" in change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220630121654.1939181-1-Jason@zx2c4.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e561e472a3d441753bd012333b057f48fef1045b upstream.
The platform's RNG must be available before random_init() in order to be
useful for initial seeding, which in turn means that it needs to be
called from setup_arch(), rather than from an init call. Fortunately,
each platform already has a setup_arch function pointer, which means
it's easy to wire this up. This commit also removes some noisy log
messages that don't add much.
Fixes: a489043f46 ("powerpc/pseries: Implement arch_get_random_long() based on H_RANDOM")
Cc: stable@vger.kernel.org # v3.13+
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220611151015.548325-4-Jason@zx2c4.com
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f3eac426657d985b97c92fa5f7ae1d43f04721f3 upstream.
The platform's RNG must be available before random_init() in order to be
useful for initial seeding, which in turn means that it needs to be
called from setup_arch(), rather than from an init call.
Complicating things, however, is that POWER8 systems need some per-cpu
state and kmalloc, which isn't available at this stage. So we split
things up into an early phase and a later opportunistic phase. This
commit also removes some noisy log messages that don't add much.
Fixes: a4da0d50b2 ("powerpc: Implement arch_get_random_long/int() for powernv")
Cc: stable@vger.kernel.org # v3.13+
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Add of_node_put(), use pnv naming, minor change log editing]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220621140849.127227-1-Jason@zx2c4.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d51f86cfd8e378d4907958db77da3074f6dce3ba upstream.
The dssall ("Data Stream Stop All") instruction is obsolete altogether
with other Data Cache Instructions since ISA 2.03 (year 2006).
LLVM IAS does not support it but PPC970 seems to be using it.
This switches dssall to .long as there is no much point in fixing LLVM.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211221055904.555763-6-aik@ozlabs.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5bb99fd4090fe1acfdb90a97993fcda7f8f5a3d6 ]
__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.
A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) argument or environment
strings.
Also, error return codes don't mean anything to obsolete_checksetup() --
only non-zero (usually 1) or zero. So return 1 from cpm_powersave_off().
Fixes: d164f6d4f9 ("powerpc/4xx: Add suspend and idle support")
Reported-by: Igor Zhbanov <izh1979@gmail.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220502192941.20955-1-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c127d130f6d59fa81701f6b04023cf7cd1972fb3 ]
In init_winctx_regs(), __pa() is called on winctx->rx_fifo and this
function is called to initialize registers for receive and fault
windows. But the real address is passed in winctx->rx_fifo for
receive windows and the virtual address for fault windows which
causes errors with DEBUG_VIRTUAL enabled. Fixes this issue by
assigning only real address to rx_fifo in vas_rx_win_attr struct
for both receive and fault windows.
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/338e958c7ab8f3b266fa794a1f80f99b9671829e.camel@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b74196af372f7cb4902179009265fe63ac81824f ]
Dump capture would fail if capture kernel is not of the endianess as the
production kernel, because the in-memory data structure (struct
opal_fadump_mem_struct) shared across production kernel and capture
kernel assumes the same endianess for both the kernels, which doesn't
have to be true always. Fix it by having a well-defined endianess for
struct opal_fadump_mem_struct.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/161902744901.86147.14719228311655123526.stgit@hbathini
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8667d0d64dd1f84fd41b5897fd87fa9113ae05e3 upstream.
Building tinyconfig with gcc (Debian 11.2.0-16) and assembler (Debian
2.37.90.20220207) the following build error shows up:
{standard input}: Assembler messages:
{standard input}:1190: Error: unrecognized opcode: `stbcix'
{standard input}:1433: Error: unrecognized opcode: `lwzcix'
{standard input}:1453: Error: unrecognized opcode: `stbcix'
{standard input}:1460: Error: unrecognized opcode: `stwcix'
{standard input}:1596: Error: unrecognized opcode: `stbcix'
...
Rework to add assembler directives [1] around the instruction. Going
through them one by one shows that the changes should be safe. Like
__get_user_atomic_128_aligned() is only called in p9_hmi_special_emu(),
which according to the name is specific to power9. And __raw_rm_read*()
are only called in things that are powernv or book3s_hv specific.
[1] https://sourceware.org/binutils/docs/as/PowerPC_002dPseudo.html#PowerPC_002dPseudo
Cc: stable@vger.kernel.org
Co-developed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
[mpe: Make commit subject more descriptive]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220224162215.3406642-2-anders.roxell@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e89257e28e844f5d1d39081bb901d9f1183a7705 upstream.
Clang warns:
arch/powerpc/platforms/cell/pervasive.c:81:2: error: unannotated fall-through between switch labels
case SRR1_WAKEEE:
^
arch/powerpc/platforms/cell/pervasive.c:81:2: note: insert 'break;' to avoid fall-through
case SRR1_WAKEEE:
^
break;
1 error generated.
Clang is more pedantic than GCC, which does not warn when failing
through to a case that is just break or return. Clang's version is more
in line with the kernel's own stance in deprecated.rst. Add athe missing
break to silence the warning.
Fixes: 6e83985b0f ("powerpc/cbe: Do not process external or decremeter interrupts from sreset")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211207110228.698956-1-anders.roxell@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a841fd009e51c8c0a8f07c942e9ab6bb48da8858 ]
for_each_node_by_name performs an of_node_get on each iteration, so
a break out of the loop requires an of_node_put.
A simplified version of the semantic patch that fixes this problem is as
follows (http://coccinelle.lip6.fr):
// <smpl>
@@
expression e,e1;
local idexpression n;
@@
for_each_node_by_name(n, e1) {
... when != of_node_put(n)
when != e = n
(
return n;
|
+ of_node_put(n);
? return ...;
)
...
}
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1448051604-25256-7-git-send-email-Julia.Lawall@lip6.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d405a939ca960162eb30c1475759cb2fdf38f8c ]
for_each_compatible_node performs an of_node_get on each iteration, so
a break out of the loop requires an of_node_put.
A simplified version of the semantic patch that fixes this problem is as
follows (http://coccinelle.lip6.fr):
// <smpl>
@@
local idexpression n;
expression e;
@@
for_each_compatible_node(n,...) {
...
(
of_node_put(n);
|
e = n
|
+ of_node_put(n);
? break;
)
...
}
... when != n
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1448051604-25256-4-git-send-email-Julia.Lawall@lip6.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f6e82647ff71d427d4148964b71f239fba9d7937 ]
for_each_compatible_node performs an of_node_get on each iteration, so
a break out of the loop requires an of_node_put.
A simplified version of the semantic patch that fixes this problem is as
follows (http://coccinelle.lip6.fr):
// <smpl>
@@
expression e;
local idexpression n;
@@
@@
local idexpression n;
expression e;
@@
for_each_compatible_node(n,...) {
...
(
of_node_put(n);
|
e = n
|
+ of_node_put(n);
? break;
)
...
}
... when != n
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1448051604-25256-2-git-send-email-Julia.Lawall@lip6.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c45361abb9185b1e172bd75eff51ad5f601ccae4 upstream.
When CONFIG_SMP=y, timebase synchronization is required when the second
kernel is started.
arch/powerpc/kernel/smp.c:
int __cpu_up(unsigned int cpu, struct task_struct *tidle)
{
...
if (smp_ops->give_timebase)
smp_ops->give_timebase();
...
}
void start_secondary(void *unused)
{
...
if (smp_ops->take_timebase)
smp_ops->take_timebase();
...
}
When CONFIG_HOTPLUG_CPU=n and CONFIG_KEXEC_CORE=n,
smp_85xx_ops.give_timebase is NULL,
smp_85xx_ops.take_timebase is NULL,
As a result, the timebase is not synchronized.
Timebase synchronization does not depend on CONFIG_HOTPLUG_CPU.
Fixes: 56f1ba2807 ("powerpc/mpc85xx: refactor the PM operations")
Cc: stable@vger.kernel.org # v4.6+
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210929033646.39630-3-nixiaoming@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 95839225639ba7c3d8d7231b542728dcf222bf2d ]
Commit a21d1becaa3f ("powerpc: Reintroduce is_kvm_guest() as a fast-path
check") added is_kvm_guest() and changed kvm_para_available() to use it.
is_kvm_guest() checks a static key, kvm_guest, and that static key is
set in check_kvm_guest().
The problem is check_kvm_guest() is only called on pseries, and even
then only in some configurations. That means is_kvm_guest() always
returns false on all non-pseries and some pseries depending on
configuration. That's a bug.
For PR KVM guests this is noticable because they no longer do live
patching of themselves, which can be detected by the omission of a
message in dmesg such as:
KVM: Live patching for a fast VM worked
To fix it make check_kvm_guest() an initcall, to ensure it's always
called at boot. It needs to be core so that it runs before
kvm_guest_init() which is postcore. To be an initcall it needs to return
int, where 0 means success, so update that.
We still call it manually in pSeries_smp_probe(), because that runs
before init calls are run.
Fixes: a21d1becaa3f ("powerpc: Reintroduce is_kvm_guest() as a fast-path check")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210623130514.2543232-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
