commit 61d64a376ea80f9097e7ea599bcd68671b836dc6 upstream.
In general, exceptions taken from EL1 need to be handled separately from
exceptions taken from EL0, as the logic to handle the two cases can be
significantly divergent, and exceptions taken from EL1 typically have
more stringent requirements on locking and instrumentation.
Subsequent patches will rework the way EL1 UNDEFs are handled in order
to address longstanding soundness issues with instrumentation and RCU.
In preparation for that rework, this patch splits the existing
do_undefinstr() handler into separate do_el0_undef() and do_el1_undef()
handlers.
Prior to this patch, do_undefinstr() was marked with NOKPROBE_SYMBOL(),
preventing instrumentation via kprobes. However, do_undefinstr() invokes
other code which can be instrumented, and:
* For UNDEFINED exceptions taken from EL0, there is no risk of recursion
within kprobes. Therefore it is safe for do_el0_undef to be
instrumented with kprobes, and it does not need to be marked with
NOKPROBE_SYMBOL().
* For UNDEFINED exceptions taken from EL1, either:
(a) The exception is has been taken when manipulating SSBS; these cases
are limited and do not occur within code that can be invoked
recursively via kprobes. Hence, in these cases instrumentation
with kprobes is benign.
(b) The exception has been taken for an unknown reason, as other than
manipulating SSBS we do not expect to take UNDEFINED exceptions
from EL1. Any handling of these exception is best-effort.
... and in either case, marking do_el1_undef() with NOKPROBE_SYMBOL()
isn't sufficient to prevent recursion via kprobes as functions it
calls (including die()) are instrumentable via kprobes.
Hence, it's not worthwhile to mark do_el1_undef() with
NOKPROBE_SYMBOL(). The same applies to do_el1_bti() and do_el1_fpac(),
so their NOKPROBE_SYMBOL() annotations are also removed.
Aside from the new instrumentability, there should be no functional
change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Joey Gouly <joey.gouly@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20221019144123.612388-3-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4d6a38da8e79e94cbd1344aa90876f0f805db705 ]
Zenghui reports that booting a kernel with "irqchip.gicv3_pseudo_nmi=1"
on the command line hits a warning during kernel entry, due to the way
we manipulate the PMR.
Early in the entry sequence, we call lockdep_hardirqs_off() to inform
lockdep that interrupts have been masked (as the HW sets DAIF wqhen
entering an exception). Architecturally PMR_EL1 is not affected by
exception entry, and we don't set GIC_PRIO_PSR_I_SET in the PMR early in
the exception entry sequence, so early in exception entry the PMR can
indicate that interrupts are unmasked even though they are masked by
DAIF.
If DEBUG_LOCKDEP is selected, lockdep_hardirqs_off() will check that
interrupts are masked, before we set GIC_PRIO_PSR_I_SET in any of the
exception entry paths, and hence lockdep_hardirqs_off() will WARN() that
something is amiss.
We can avoid this by consistently setting GIC_PRIO_PSR_I_SET during
exception entry so that kernel code sees a consistent environment. We
must also update local_daif_inherit() to undo this, as currently only
touches DAIF. For other paths, local_daif_restore() will update both
DAIF and the PMR. With this done, we can remove the existing special
cases which set this later in the entry code.
We always use (GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET) for consistency with
local_daif_save(), as this will warn if it ever encounters
(GIC_PRIO_IRQOFF | GIC_PRIO_PSR_I_SET), and never sets this itself. This
matches the gic_prio_kentry_setup that we have to retain for
ret_to_user.
The original splat from Zenghui's report was:
| DEBUG_LOCKS_WARN_ON(!irqs_disabled())
| WARNING: CPU: 3 PID: 125 at kernel/locking/lockdep.c:4258 lockdep_hardirqs_off+0xd4/0xe8
| Modules linked in:
| CPU: 3 PID: 125 Comm: modprobe Tainted: G W 5.12.0-rc8+ #463
| Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
| pstate: 604003c5 (nZCv DAIF +PAN -UAO -TCO BTYPE=--)
| pc : lockdep_hardirqs_off+0xd4/0xe8
| lr : lockdep_hardirqs_off+0xd4/0xe8
| sp : ffff80002a39bad0
| pmr_save: 000000e0
| x29: ffff80002a39bad0 x28: ffff0000de214bc0
| x27: ffff0000de1c0400 x26: 000000000049b328
| x25: 0000000000406f30 x24: ffff0000de1c00a0
| x23: 0000000020400005 x22: ffff8000105f747c
| x21: 0000000096000044 x20: 0000000000498ef9
| x19: ffff80002a39bc88 x18: ffffffffffffffff
| x17: 0000000000000000 x16: ffff800011c61eb0
| x15: ffff800011700a88 x14: 0720072007200720
| x13: 0720072007200720 x12: 0720072007200720
| x11: 0720072007200720 x10: 0720072007200720
| x9 : ffff80002a39bad0 x8 : ffff80002a39bad0
| x7 : ffff8000119f0800 x6 : c0000000ffff7fff
| x5 : ffff8000119f07a8 x4 : 0000000000000001
| x3 : 9bcdab23f2432800 x2 : ffff800011730538
| x1 : 9bcdab23f2432800 x0 : 0000000000000000
| Call trace:
| lockdep_hardirqs_off+0xd4/0xe8
| enter_from_kernel_mode.isra.5+0x7c/0xa8
| el1_abort+0x24/0x100
| el1_sync_handler+0x80/0xd0
| el1_sync+0x6c/0x100
| __arch_clear_user+0xc/0x90
| load_elf_binary+0x9fc/0x1450
| bprm_execve+0x404/0x880
| kernel_execve+0x180/0x188
| call_usermodehelper_exec_async+0xdc/0x158
| ret_from_fork+0x10/0x18
Fixes: 23529049c6 ("arm64: entry: fix non-NMI user<->kernel transitions")
Fixes: 7cd1ea1010 ("arm64: entry: fix non-NMI kernel<->kernel transitions")
Fixes: f0cd5ac1e4 ("arm64: entry: fix NMI {user, kernel}->kernel transitions")
Fixes: 2a9b3e6ac6 ("arm64: entry: fix EL1 debug transitions")
Link: https://lore.kernel.org/r/f4012761-026f-4e51-3a0c-7524e434e8b3@huawei.com
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210428111555.50880-1-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
In debug_exception_enter() and debug_exception_exit() we trace hardirqs
on/off while RCU isn't guaranteed to be watching, and we don't save and
restore the hardirq state, and so may return with this having changed.
Handle this appropriately with new entry/exit helpers which do the bare
minimum to ensure this is appropriately maintained, without marking
debug exceptions as NMIs. These are placed in entry-common.c with the
other entry/exit helpers.
In future we'll want to reconsider whether some debug exceptions should
be NMIs, but this will require a significant refactoring, and for now
this should prevent issues with lockdep and RCU.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marins <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201130115950.22492-12-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Exceptions which can be taken at (almost) any time are consdiered to be
NMIs. On arm64 that includes:
* SDEI events
* GICv3 Pseudo-NMIs
* Kernel stack overflows
* Unexpected/unhandled exceptions
... but currently debug exceptions (BRKs, breakpoints, watchpoints,
single-step) are not considered NMIs.
As these can be taken at any time, kernel features (lockdep, RCU,
ftrace) may not be in a consistent kernel state. For example, we may
take an NMI from the idle code or partway through an entry/exit path.
While nmi_enter() and nmi_exit() handle most of this state, notably they
don't save/restore the lockdep state across an NMI being taken and
handled. When interrupts are enabled and an NMI is taken, lockdep may
see interrupts become disabled within the NMI code, but not see
interrupts become enabled when returning from the NMI, leaving lockdep
believing interrupts are disabled when they are actually disabled.
The x86 code handles this in idtentry_{enter,exit}_nmi(), which will
shortly be moved to the generic entry code. As we can't use either yet,
we copy the x86 approach in arm64-specific helpers. All the NMI
entrypoints are marked as noinstr to prevent any instrumentation
handling code being invoked before the state has been corrected.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201130115950.22492-11-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
There are periods in kernel mode when RCU is not watching and/or the
scheduler tick is disabled, but we can still take exceptions such as
interrupts. The arm64 exception handlers do not account for this, and
it's possible that RCU is not watching while an exception handler runs.
The x86/generic entry code handles this by ensuring that all (non-NMI)
kernel exception handlers call irqentry_enter() and irqentry_exit(),
which handle RCU, lockdep, and IRQ flag tracing. We can't yet move to
the generic entry code, and already hadnle the user<->kernel transitions
elsewhere, so we add new kernel<->kernel transition helpers alog the
lines of the generic entry code.
Since we now track interrupts becoming masked when an exception is
taken, local_daif_inherit() is modified to track interrupts becoming
re-enabled when the original context is inherited. To balance the
entry/exit paths, each handler masks all DAIF exceptions before
exit_to_kernel_mode().
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201130115950.22492-10-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
When built with PROVE_LOCKING, NO_HZ_FULL, and CONTEXT_TRACKING_FORCE
will WARN() at boot time that interrupts are enabled when we call
context_tracking_user_enter(), despite the DAIF flags indicating that
IRQs are masked.
The problem is that we're not tracking IRQ flag changes accurately, and
so lockdep believes interrupts are enabled when they are not (and
vice-versa). We can shuffle things so to make this more accurate. For
kernel->user transitions there are a number of constraints we need to
consider:
1) When we call __context_tracking_user_enter() HW IRQs must be disabled
and lockdep must be up-to-date with this.
2) Userspace should be treated as having IRQs enabled from the PoV of
both lockdep and tracing.
3) As context_tracking_user_enter() stops RCU from watching, we cannot
use RCU after calling it.
4) IRQ flag tracing and lockdep have state that must be manipulated
before RCU is disabled.
... with similar constraints applying for user->kernel transitions, with
the ordering reversed.
The generic entry code has enter_from_user_mode() and
exit_to_user_mode() helpers to handle this. We can't use those directly,
so we add arm64 copies for now (without the instrumentation markers
which aren't used on arm64). These replace the existing user_exit() and
user_exit_irqoff() calls spread throughout handlers, and the exception
unmasking is left as-is.
Note that:
* The accounting for debug exceptions from userspace now happens in
el0_dbg() and ret_to_user(), so this is removed from
debug_exception_enter() and debug_exception_exit(). As
user_exit_irqoff() wakes RCU, the userspace-specific check is removed.
* The accounting for syscalls now happens in el0_svc(),
el0_svc_compat(), and ret_to_user(), so this is removed from
el0_svc_common(). This does not adversely affect the workaround for
erratum 1463225, as this does not depend on any of the state tracking.
* In ret_to_user() we mask interrupts with local_daif_mask(), and so we
need to inform lockdep and tracing. Here a trace_hardirqs_off() is
sufficient and safe as we have not yet exited kernel context and RCU
is usable.
* As PROVE_LOCKING selects TRACE_IRQFLAGS, the ifdeferry in entry.S only
needs to check for the latter.
* EL0 SError handling will be dealt with in a subsequent patch, as this
needs to be treated as an NMI.
Prior to this patch, booting an appropriately-configured kernel would
result in spats as below:
| DEBUG_LOCKS_WARN_ON(lockdep_hardirqs_enabled())
| WARNING: CPU: 2 PID: 1 at kernel/locking/lockdep.c:5280 check_flags.part.54+0x1dc/0x1f0
| Modules linked in:
| CPU: 2 PID: 1 Comm: init Not tainted 5.10.0-rc3 #3
| Hardware name: linux,dummy-virt (DT)
| pstate: 804003c5 (Nzcv DAIF +PAN -UAO -TCO BTYPE=--)
| pc : check_flags.part.54+0x1dc/0x1f0
| lr : check_flags.part.54+0x1dc/0x1f0
| sp : ffff80001003bd80
| x29: ffff80001003bd80 x28: ffff66ce801e0000
| x27: 00000000ffffffff x26: 00000000000003c0
| x25: 0000000000000000 x24: ffffc31842527258
| x23: ffffc31842491368 x22: ffffc3184282d000
| x21: 0000000000000000 x20: 0000000000000001
| x19: ffffc318432ce000 x18: 0080000000000000
| x17: 0000000000000000 x16: ffffc31840f18a78
| x15: 0000000000000001 x14: ffffc3184285c810
| x13: 0000000000000001 x12: 0000000000000000
| x11: ffffc318415857a0 x10: ffffc318406614c0
| x9 : ffffc318415857a0 x8 : ffffc31841f1d000
| x7 : 647261685f706564 x6 : ffffc3183ff7c66c
| x5 : ffff66ce801e0000 x4 : 0000000000000000
| x3 : ffffc3183fe00000 x2 : ffffc31841500000
| x1 : e956dc24146b3500 x0 : 0000000000000000
| Call trace:
| check_flags.part.54+0x1dc/0x1f0
| lock_is_held_type+0x10c/0x188
| rcu_read_lock_sched_held+0x70/0x98
| __context_tracking_enter+0x310/0x350
| context_tracking_enter.part.3+0x5c/0xc8
| context_tracking_user_enter+0x6c/0x80
| finish_ret_to_user+0x2c/0x13cr
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201130115950.22492-8-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
In preparation for reworking the EL1 irq/nmi entry code, move the
existing logic to C. We no longer need the asm_nmi_enter() and
asm_nmi_exit() wrappers, so these are removed. The new C functions are
marked noinstr, which prevents compiler instrumentation and runtime
probing.
In subsequent patches we'll want the new C helpers to be called in all
cases, so we don't bother wrapping the calls with ifdeferry. Even when
the new C functions are stubs the trivial calls are unlikely to have a
measurable impact on the IRQ or NMI paths anyway.
Prototypes are added to <asm/exception.h> as otherwise (in some
configurations) GCC will complain about the lack of a forward
declaration. We already do this for existing function, e.g.
enter_from_user_mode().
The new helpers are marked as noinstr (which prevents all
instrumentation, tracing, and kprobes). Otherwise, there should be no
functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201130115950.22492-7-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
In later patches we'll want to extend enter_from_user_mode() and add a
corresponding exit_to_user_mode(). As these will be common for all
entries/exits from userspace, it'd be better for these to live in
entry-common.c with the rest of the entry logic.
This patch moves enter_from_user_mode() into entry-common.c. As with
other functions in entry-common.c it is marked as noinstr (which
prevents all instrumentation, tracing, and kprobes) but there are no
other functional changes.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201130115950.22492-5-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Functions in entry-common.c are marked as notrace and NOKPROBE_SYMBOL(),
but they're still subject to other instrumentation which may rely on
lockdep/rcu/context-tracking being up-to-date, and may cause nested
exceptions (e.g. for WARN/BUG or KASAN's use of BRK) which will corrupt
exceptions registers which have not yet been read.
Prevent this by marking all functions in entry-common.c as noinstr to
prevent compiler instrumentation. This also blacklists the functions for
tracing and kprobes, so we don't need to handle that separately.
Functions elsewhere will be dealt with in subsequent patches.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201130115950.22492-4-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Some Armv8.3 Pointer Authentication enhancements have been introduced
which are mandatory for Armv8.6 and optional for Armv8.3. These features
are,
* ARMv8.3-PAuth2 - An enhanced PAC generation logic is added which hardens
finding the correct PAC value of the authenticated pointer.
* ARMv8.3-FPAC - Fault is generated now when the ptrauth authentication
instruction fails in authenticating the PAC present in the address.
This is different from earlier case when such failures just adds an
error code in the top byte and waits for subsequent load/store to abort.
The ptrauth instructions which may cause this fault are autiasp, retaa
etc.
The above features are now represented by additional configurations
for the Address Authentication cpufeature and a new ESR exception class.
The userspace fault received in the kernel due to ARMv8.3-FPAC is treated
as Illegal instruction and hence signal SIGILL is injected with ILL_ILLOPN
as the signal code. Note that this is different from earlier ARMv8.3
ptrauth where signal SIGSEGV is issued due to Pointer authentication
failures. The in-kernel PAC fault causes kernel to crash.
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Link: https://lore.kernel.org/r/20200914083656.21428-4-amit.kachhap@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Support for Branch Target Identification (BTI) in user and kernel
(Mark Brown and others)
* for-next/bti: (39 commits)
arm64: vdso: Fix CFI directives in sigreturn trampoline
arm64: vdso: Don't prefix sigreturn trampoline with a BTI C instruction
arm64: bti: Fix support for userspace only BTI
arm64: kconfig: Update and comment GCC version check for kernel BTI
arm64: vdso: Map the vDSO text with guarded pages when built for BTI
arm64: vdso: Force the vDSO to be linked as BTI when built for BTI
arm64: vdso: Annotate for BTI
arm64: asm: Provide a mechanism for generating ELF note for BTI
arm64: bti: Provide Kconfig for kernel mode BTI
arm64: mm: Mark executable text as guarded pages
arm64: bpf: Annotate JITed code for BTI
arm64: Set GP bit in kernel page tables to enable BTI for the kernel
arm64: asm: Override SYM_FUNC_START when building the kernel with BTI
arm64: bti: Support building kernel C code using BTI
arm64: Document why we enable PAC support for leaf functions
arm64: insn: Report PAC and BTI instructions as skippable
arm64: insn: Don't assume unrecognized HINTs are skippable
arm64: insn: Provide a better name for aarch64_insn_is_nop()
arm64: insn: Add constants for new HINT instruction decode
arm64: Disable old style assembly annotations
...
Merge in user support for Branch Target Identification, which narrowly
missed the cut for 5.7 after a late ABI concern.
* for-next/bti-user:
arm64: bti: Document behaviour for dynamically linked binaries
arm64: elf: Fix allnoconfig kernel build with !ARCH_USE_GNU_PROPERTY
arm64: BTI: Add Kconfig entry for userspace BTI
mm: smaps: Report arm64 guarded pages in smaps
arm64: mm: Display guarded pages in ptdump
KVM: arm64: BTI: Reset BTYPE when skipping emulated instructions
arm64: BTI: Reset BTYPE when skipping emulated instructions
arm64: traps: Shuffle code to eliminate forward declarations
arm64: unify native/compat instruction skipping
arm64: BTI: Decode BYTPE bits when printing PSTATE
arm64: elf: Enable BTI at exec based on ELF program properties
elf: Allow arch to tweak initial mmap prot flags
arm64: Basic Branch Target Identification support
ELF: Add ELF program property parsing support
ELF: UAPI and Kconfig additions for ELF program properties
This patch adds the bare minimum required to expose the ARMv8.5
Branch Target Identification feature to userspace.
By itself, this does _not_ automatically enable BTI for any initial
executable pages mapped by execve(). This will come later, but for
now it should be possible to enable BTI manually on those pages by
using mprotect() from within the target process.
Other arches already using the generic mman.h are already using
0x10 for arch-specific prot flags, so we use that for PROT_BTI
here.
For consistency, signal handler entry points in BTI guarded pages
are required to be annotated as such, just like any other function.
This blocks a relatively minor attack vector, but comforming
userspace will have the annotations anyway, so we may as well
enforce them.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently, the EL0 SP alignment handler masks IRQs unnecessarily. It
does so due to historic code sharing of the EL0 SP and PC alignment
handlers, and branch predictor hardening applicable to the EL0 SP
handler.
We began masking IRQs in the EL0 SP alignment handler in commit:
5dfc6ed277 ("arm64: entry: Apply BP hardening for high-priority synchronous exception")
... as this shared code with the EL0 PC alignment handler, and branch
predictor hardening made it necessary to disable IRQs for early parts of
the EL0 PC alignment handler. It was not necessary to mask IRQs during
EL0 SP alignment exceptions, but it was not considered harmful to do so.
This masking was carried forward into C code in commit:
582f95835a ("arm64: entry: convert el0_sync to C")
... where the SP/PC cases were split into separate handlers, and the
masking duplicated.
Subsequently the EL0 PC alignment handler was refactored to perform
branch predictor hardening before unmasking IRQs, in commit:
bfe298745a ("arm64: entry-common: don't touch daif before bp-hardening")
... but the redundant masking of IRQs was not removed from the EL0 SP
alignment handler.
Let's do so now, and make it interruptible as with most other
synchronous exception handlers.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
For most of the exception entry code, <foo>_handler() is the first C
function called from the entry assembly in entry-common.c, and external
functions handling the bulk of the logic are called do_<foo>().
For consistency, apply this scheme to el0_svc_handler and
el0_svc_compat_handler, renaming them to do_el0_svc and
do_el0_svc_compat respectively.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Almost all functions in entry-common.c are marked notrace, with
el1_undef and el1_inv being the only exceptions. We appear to have done
this on the assumption that there were no exception registers that we
needed to snapshot, and thus it was safe to run trace code that might
result in further exceptions and clobber those registers.
However, until we inherit the DAIF flags, our irq flag tracing is stale,
and this discrepancy could set off warnings in some configurations. For
example if CONFIG_DEBUG_LOCKDEP is selected and a trace function calls
into any flag-checking locking routines. Given we don't expect to
trigger el1_undef or el1_inv unless something is already wrong, any
irqflag warnigns are liable to mask the information we'd actually care
about.
Let's keep things simple and mark el1_undef and el1_inv as notrace.
Developers can trace do_undefinstr and bad_mode if they really want to
monitor these cases.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
The previous patches mechanically transformed the assembly version of
entry.S to entry-common.c for synchronous exceptions.
The C version of local_daif_restore() doesn't quite do the same thing
as the assembly versions if pseudo-NMI is in use. In particular,
| local_daif_restore(DAIF_PROCCTX_NOIRQ)
will still allow pNMI to be delivered. This is not the behaviour
do_el0_ia_bp_hardening() and do_sp_pc_abort() want as it should not
be possible for the PMU handler to run as an NMI until the bp-hardening
sequence has run.
The bp-hardening calls were placed where they are because this was the
first C code to run after the relevant exceptions. As we've now moved
that point earlier, move the checks and calls earlier too.
This makes it clearer that this stuff runs before any kind of exception,
and saves modifying PSTATE twice.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Cc: Julien Thierry <julien.thierry.kdev@gmail.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This is largely a 1-1 conversion of asm to C, with a couple of caveats.
The el0_sync{_compat} switches explicitly handle all the EL0 debug
cases, so el0_dbg doesn't have to try to bail out for unexpected EL1
debug ESR values. This also means that an unexpected vector catch from
AArch32 is routed to el0_inv.
We *could* merge the native and compat switches, which would make the
diffstat negative, but I've tried to stay as close to the existing
assembly as possible for the moment.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
[split out of a bigger series, added nokprobes. removed irq trace
calls as the C helpers do this. renamed el0_dbg's use of FAR]
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Cc: Julien Thierry <julien.thierry.kdev@gmail.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This patch converts the EL1 sync entry assembly logic to C code.
Doing this will allow us to make changes in a slightly more
readable way. A case in point is supporting kernel-first RAS.
do_sea() should be called on the CPU that took the fault.
Largely the assembly code is converted to C in a relatively
straightforward manner.
Since all sync sites share a common asm entry point, the ASM_BUG()
instances are no longer required for effective backtraces back to
assembly, and we don't need similar BUG() entries.
The ESR_ELx.EC codes for all (supported) debug exceptions are now
checked in the el1_sync_handler's switch statement, which renders the
check in el1_dbg redundant. This both simplifies the el1_dbg handler,
and makes the EL1 exception handling more robust to
currently-unallocated ESR_ELx.EC encodings.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
[split out of a bigger series, added nokprobes, moved prototypes]
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Cc: Julien Thierry <julien.thierry.kdev@gmail.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
