The Intel Software Developers' Manual erroneously listed bit 5 of the
IA32_CORE_CAPABILITIES register as an architectural feature. It is not.
Features enumerated by IA32_CORE_CAPABILITIES are model specific and
implementation details may vary in different cpu models. Thus it is only
safe to trust features after checking the CPU model.
Icelake client and server models are known to implement the split lock
detect feature even though they don't enumerate IA32_CORE_CAPABILITIES
[ tglx: Use switch() for readability and massage comments ]
Fixes: 6650cdd9a8 ("x86/split_lock: Enable split lock detection by kernel")
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200416205754.21177-3-tony.luck@intel.com
Without at least minimal handling for split lock detection induced #AC,
VMX will just run into the same problem as the VMWare hypervisor, which
was reported by Kenneth.
It will inject the #AC blindly into the guest whether the guest is
prepared or not.
Provide a function for guest mode which acts depending on the host
SLD mode. If mode == sld_warn, treat it like user space, i.e. emit a
warning, disable SLD and mark the task accordingly. Otherwise force
SIGBUS.
[ bp: Add a !CPU_SUP_INTEL stub for handle_guest_split_lock(). ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lkml.kernel.org/r/20200410115516.978037132@linutronix.de
Link: https://lkml.kernel.org/r/20200402123258.895628824@linutronix.de
In a context switch from a task that is detecting split locks to one that
is not (or vice versa) we need to update the TEST_CTRL MSR. Currently this
is done with the common sequence:
read the MSR
flip the bit
write the MSR
in order to avoid changing the value of any reserved bits in the MSR.
Cache unused and reserved bits of TEST_CTRL MSR with SPLIT_LOCK_DETECT bit
cleared during initialization, so we can avoid an expensive RDMSR
instruction during context switch.
Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Originally-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200325030924.132881-3-xiaoyao.li@intel.com
Current initialization flow of split lock detection has following issues:
1. It assumes the initial value of MSR_TEST_CTRL.SPLIT_LOCK_DETECT to be
zero. However, it's possible that BIOS/firmware has set it.
2. X86_FEATURE_SPLIT_LOCK_DETECT flag is unconditionally set even if
there is a virtualization flaw that FMS indicates the existence while
it's actually not supported.
Rework the initialization flow to solve above issues. In detail, explicitly
clear and set split_lock_detect bit to verify MSR_TEST_CTRL can be
accessed, and rdmsr after wrmsr to ensure bit is cleared/set successfully.
X86_FEATURE_SPLIT_LOCK_DETECT flag is set only when the feature does exist
and the feature is not disabled with kernel param "split_lock_detect=off"
On each processor, explicitly updating the SPLIT_LOCK_DETECT bit based on
sld_sate in split_lock_init() since BIOS/firmware may touch it.
Originally-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200325030924.132881-2-xiaoyao.li@intel.com
A split-lock occurs when an atomic instruction operates on data that spans
two cache lines. In order to maintain atomicity the core takes a global bus
lock.
This is typically >1000 cycles slower than an atomic operation within a
cache line. It also disrupts performance on other cores (which must wait
for the bus lock to be released before their memory operations can
complete). For real-time systems this may mean missing deadlines. For other
systems it may just be very annoying.
Some CPUs have the capability to raise an #AC trap when a split lock is
attempted.
Provide a command line option to give the user choices on how to handle
this:
split_lock_detect=
off - not enabled (no traps for split locks)
warn - warn once when an application does a
split lock, but allow it to continue
running.
fatal - Send SIGBUS to applications that cause split lock
On systems that support split lock detection the default is "warn". Note
that if the kernel hits a split lock in any mode other than "off" it will
OOPs.
One implementation wrinkle is that the MSR to control the split lock
detection is per-core, not per thread. This might result in some short
lived races on HT systems in "warn" mode if Linux tries to enable on one
thread while disabling on the other. Race analysis by Sean Christopherson:
- Toggling of split-lock is only done in "warn" mode. Worst case
scenario of a race is that a misbehaving task will generate multiple
#AC exceptions on the same instruction. And this race will only occur
if both siblings are running tasks that generate split-lock #ACs, e.g.
a race where sibling threads are writing different values will only
occur if CPUx is disabling split-lock after an #AC and CPUy is
re-enabling split-lock after *its* previous task generated an #AC.
- Transitioning between off/warn/fatal modes at runtime isn't supported
and disabling is tracked per task, so hardware will always reach a steady
state that matches the configured mode. I.e. split-lock is guaranteed to
be enabled in hardware once all _TIF_SLD threads have been scheduled out.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Co-developed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20200126200535.GB30377@agluck-desk2.amr.corp.intel.com
Pull x86 MPX removal from Dave Hansen:
"MPX requires recompiling applications, which requires compiler
support. Unfortunately, GCC 9.1 is expected to be be released without
support for MPX. This means that there was only a relatively small
window where folks could have ever used MPX. It failed to gain wide
adoption in the industry, and Linux was the only mainstream OS to ever
support it widely.
Support for the feature may also disappear on future processors.
This set completes the process that we started during the 5.4 merge
window when the MPX prctl()s were removed. XSAVE support is left in
place, which allows MPX-using KVM guests to continue to function"
* tag 'mpx-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/daveh/x86-mpx:
x86/mpx: remove MPX from arch/x86
mm: remove arch_bprm_mm_init() hook
x86/mpx: remove bounds exception code
x86/mpx: remove build infrastructure
x86/alternatives: add missing insn.h include
From: Dave Hansen <dave.hansen@linux.intel.com>
MPX is being removed from the kernel due to a lack of support
in the toolchain going forward (gcc).
This removes all the remaining (dead at this point) MPX handling
code remaining in the tree. The only remaining code is the XSAVE
support for MPX state which is currently needd for KVM to handle
VMs which might use MPX.
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: x86@kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Opportunistically initialize IA32_FEAT_CTL to enable VMX when the MSR is
left unlocked by BIOS. Configuring feature control at boot time paves
the way for similar enabling of other features, e.g. Software Guard
Extensions (SGX).
Temporarily leave equivalent KVM code in place in order to avoid
introducing a regression on Centaur and Zhaoxin CPUs, e.g. removing
KVM's code would leave the MSR unlocked on those CPUs and would break
existing functionality if people are loading kvm_intel on Centaur and/or
Zhaoxin. Defer enablement of the boot-time configuration on Centaur and
Zhaoxin to future patches to aid bisection.
Note, Local Machine Check Exceptions (LMCE) are also supported by the
kernel and enabled via feature control, but the kernel currently uses
LMCE if and only if the feature is explicitly enabled by BIOS. Keep
the current behavior to avoid introducing bugs, future patches can opt
in to opportunistic enabling if it's deemed desirable to do so.
Always lock IA32_FEAT_CTL if it exists, even if the CPU doesn't support
VMX, so that other existing and future kernel code that queries the MSR
can assume it's locked.
Start from a clean slate when constructing the value to write to
IA32_FEAT_CTL, i.e. ignore whatever value BIOS left in the MSR so as not
to enable random features or fault on the WRMSR.
Suggested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20191221044513.21680-5-sean.j.christopherson@intel.com
Add a kernel cmdline parameter "tsx" to control the Transactional
Synchronization Extensions (TSX) feature. On CPUs that support TSX
control, use "tsx=on|off" to enable or disable TSX. Not specifying this
option is equivalent to "tsx=off". This is because on certain processors
TSX may be used as a part of a speculative side channel attack.
Carve out the TSX controlling functionality into a separate compilation
unit because TSX is a CPU feature while the TSX async abort control
machinery will go to cpu/bugs.c.
[ bp: - Massage, shorten and clear the arg buffer.
- Clarifications of the tsx= possible options - Josh.
- Expand on TSX_CTRL availability - Pawan. ]
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
The current handling of MSR_IA32_ENERGY_PERF_BIAS in the kernel is
problematic, because it may cause changes made by user space to that
MSR (with the help of the x86_energy_perf_policy tool, for example)
to be lost every time a CPU goes offline and then back online as well
as during system-wide power management transitions into sleep states
and back into the working state.
The first problem is that if the current EPB value for a CPU going
online is 0 ('performance'), the kernel will change it to 6 ('normal')
regardless of whether or not this is the first bring-up of that CPU.
That also happens during system-wide resume from sleep states
(including, but not limited to, hibernation). However, the EPB may
have been adjusted by user space this way and the kernel should not
blindly override that setting.
The second problem is that if the platform firmware resets the EPB
values for any CPUs during system-wide resume from a sleep state,
the kernel will not restore their previous EPB values that may
have been set by user space before the preceding system-wide
suspend transition. Again, that behavior may at least be confusing
from the user space perspective.
In order to address these issues, rework the handling of
MSR_IA32_ENERGY_PERF_BIAS so that the EPB value is saved on CPU
offline and restored on CPU online as well as (for the boot CPU)
during the syscore stages of system-wide suspend and resume
transitions, respectively.
However, retain the policy by which the EPB is set to 6 ('normal')
on the first bring-up of each CPU if its initial value is 0, based
on the observation that 0 may mean 'not initialized' just as well as
'performance' in that case.
While at it, move the MSR_IA32_ENERGY_PERF_BIAS handling code into
a separate file and document it in Documentation/admin-guide.
Fixes: abe48b1082 (x86, intel, power: Initialize MSR_IA32_ENERGY_PERF_BIAS)
Fixes: b51ef52df7 (x86/cpu: Restore MSR_IA32_ENERGY_PERF_BIAS after resume)
Reported-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Merge L1 Terminal Fault fixes from Thomas Gleixner:
"L1TF, aka L1 Terminal Fault, is yet another speculative hardware
engineering trainwreck. It's a hardware vulnerability which allows
unprivileged speculative access to data which is available in the
Level 1 Data Cache when the page table entry controlling the virtual
address, which is used for the access, has the Present bit cleared or
other reserved bits set.
If an instruction accesses a virtual address for which the relevant
page table entry (PTE) has the Present bit cleared or other reserved
bits set, then speculative execution ignores the invalid PTE and loads
the referenced data if it is present in the Level 1 Data Cache, as if
the page referenced by the address bits in the PTE was still present
and accessible.
While this is a purely speculative mechanism and the instruction will
raise a page fault when it is retired eventually, the pure act of
loading the data and making it available to other speculative
instructions opens up the opportunity for side channel attacks to
unprivileged malicious code, similar to the Meltdown attack.
While Meltdown breaks the user space to kernel space protection, L1TF
allows to attack any physical memory address in the system and the
attack works across all protection domains. It allows an attack of SGX
and also works from inside virtual machines because the speculation
bypasses the extended page table (EPT) protection mechanism.
The assoicated CVEs are: CVE-2018-3615, CVE-2018-3620, CVE-2018-3646
The mitigations provided by this pull request include:
- Host side protection by inverting the upper address bits of a non
present page table entry so the entry points to uncacheable memory.
- Hypervisor protection by flushing L1 Data Cache on VMENTER.
- SMT (HyperThreading) control knobs, which allow to 'turn off' SMT
by offlining the sibling CPU threads. The knobs are available on
the kernel command line and at runtime via sysfs
- Control knobs for the hypervisor mitigation, related to L1D flush
and SMT control. The knobs are available on the kernel command line
and at runtime via sysfs
- Extensive documentation about L1TF including various degrees of
mitigations.
Thanks to all people who have contributed to this in various ways -
patches, review, testing, backporting - and the fruitful, sometimes
heated, but at the end constructive discussions.
There is work in progress to provide other forms of mitigations, which
might be less horrible performance wise for a particular kind of
workloads, but this is not yet ready for consumption due to their
complexity and limitations"
* 'l1tf-final' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits)
x86/microcode: Allow late microcode loading with SMT disabled
tools headers: Synchronise x86 cpufeatures.h for L1TF additions
x86/mm/kmmio: Make the tracer robust against L1TF
x86/mm/pat: Make set_memory_np() L1TF safe
x86/speculation/l1tf: Make pmd/pud_mknotpresent() invert
x86/speculation/l1tf: Invert all not present mappings
cpu/hotplug: Fix SMT supported evaluation
KVM: VMX: Tell the nested hypervisor to skip L1D flush on vmentry
x86/speculation: Use ARCH_CAPABILITIES to skip L1D flush on vmentry
x86/speculation: Simplify sysfs report of VMX L1TF vulnerability
Documentation/l1tf: Remove Yonah processors from not vulnerable list
x86/KVM/VMX: Don't set l1tf_flush_l1d from vmx_handle_external_intr()
x86/irq: Let interrupt handlers set kvm_cpu_l1tf_flush_l1d
x86: Don't include linux/irq.h from asm/hardirq.h
x86/KVM/VMX: Introduce per-host-cpu analogue of l1tf_flush_l1d
x86/irq: Demote irq_cpustat_t::__softirq_pending to u16
x86/KVM/VMX: Move the l1tf_flush_l1d test to vmx_l1d_flush()
x86/KVM/VMX: Replace 'vmx_l1d_flush_always' with 'vmx_l1d_flush_cond'
x86/KVM/VMX: Don't set l1tf_flush_l1d to true from vmx_l1d_flush()
cpu/hotplug: detect SMT disabled by BIOS
...
Some Intel processors have an EPT feature whereby the accessed & dirty bits
in EPT entries can be updated by HW. MSR IA32_VMX_EPT_VPID_CAP exposes the
presence of this capability.
There is no point in trying to use that new feature bit in the VMX code as
VMX needs to read the MSR anyway to access other bits, but having the
feature bit for EPT_AD in place helps virtualization management as it
exposes "ept_ad" in /proc/cpuinfo/$proc/flags if the feature is present.
[ tglx: Amended changelog ]
Signed-off-by: Peter Feiner <pfeiner@google.com>
Signed-off-by: Peter Shier <pshier@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jim Mattson <jmattson@google.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lkml.kernel.org/r/20180801180657.138051-1-pshier@google.com
Make use of the new early detection function to initialize smp_num_siblings
on the boot cpu before the MP-Table or ACPI/MADT scan happens. That's
required for force disabling SMT.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Pull x86 boot updates from Ingo Molnar:
- Centaur CPU updates (David Wang)
- AMD and other CPU topology enumeration improvements and fixes
(Borislav Petkov, Thomas Gleixner, Suravee Suthikulpanit)
- Continued 5-level paging work (Kirill A. Shutemov)
* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Mark __pgtable_l5_enabled __initdata
x86/mm: Mark p4d_offset() __always_inline
x86/mm: Introduce the 'no5lvl' kernel parameter
x86/mm: Stop pretending pgtable_l5_enabled is a variable
x86/mm: Unify pgtable_l5_enabled usage in early boot code
x86/boot/compressed/64: Fix trampoline page table address calculation
x86/CPU: Move x86_cpuinfo::x86_max_cores assignment to detect_num_cpu_cores()
x86/Centaur: Report correct CPU/cache topology
x86/CPU: Move cpu_detect_cache_sizes() into init_intel_cacheinfo()
x86/CPU: Make intel_num_cpu_cores() generic
x86/CPU: Move cpu local function declarations to local header
x86/CPU/AMD: Derive CPU topology from CPUID function 0xB when available
x86/CPU: Modify detect_extended_topology() to return result
x86/CPU/AMD: Calculate last level cache ID from number of sharing threads
x86/CPU: Rename intel_cacheinfo.c to cacheinfo.c
perf/events/amd/uncore: Fix amd_uncore_llc ID to use pre-defined cpu_llc_id
x86/CPU/AMD: Have smp_num_siblings and cpu_llc_id always be present
x86/Centaur: Initialize supported CPU features properly
The SSBD enumeration is similarly to the other bits magically shared
between Intel and AMD though the mechanisms are different.
Make X86_FEATURE_SSBD synthetic and set it depending on the vendor specific
features or family dependent setup.
Change the Intel bit to X86_FEATURE_SPEC_CTRL_SSBD to denote that SSBD is
controlled via MSR_SPEC_CTRL and fix up the usage sites.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
The availability of the SPEC_CTRL MSR is enumerated by a CPUID bit on
Intel and implied by IBRS or STIBP support on AMD. That's just confusing
and in case an AMD CPU has IBRS not supported because the underlying
problem has been fixed but has another bit valid in the SPEC_CTRL MSR,
the thing falls apart.
Add a synthetic feature bit X86_FEATURE_MSR_SPEC_CTRL to denote the
availability on both Intel and AMD.
While at it replace the boot_cpu_has() checks with static_cpu_has() where
possible. This prevents late microcode loading from exposing SPEC_CTRL, but
late loading is already very limited as it does not reevaluate the
mitigation options and other bits and pieces. Having static_cpu_has() is
the simplest and least fragile solution.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Intel collateral will reference the SSB mitigation bit in IA32_SPEC_CTL[2]
as SSBD (Speculative Store Bypass Disable).
Hence changing it.
It is unclear yet what the MSR_IA32_ARCH_CAPABILITIES (0x10a) Bit(4) name
is going to be. Following the rename it would be SSBD_NO but that rolls out
to Speculative Store Bypass Disable No.
Also fixed the missing space in X86_FEATURE_AMD_SSBD.
[ tglx: Fixup x86_amd_rds_enable() and rds_tif_to_amd_ls_cfg() as well ]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Intel CPUs expose methods to:
- Detect whether RDS capability is available via CPUID.7.0.EDX[31],
- The SPEC_CTRL MSR(0x48), bit 2 set to enable RDS.
- MSR_IA32_ARCH_CAPABILITIES, Bit(4) no need to enable RRS.
With that in mind if spec_store_bypass_disable=[auto,on] is selected set at
boot-time the SPEC_CTRL MSR to enable RDS if the platform requires it.
Note that this does not fix the KVM case where the SPEC_CTRL is exposed to
guests which can muck with it, see patch titled :
KVM/SVM/VMX/x86/spectre_v2: Support the combination of guest and host IBRS.
And for the firmware (IBRS to be set), see patch titled:
x86/spectre_v2: Read SPEC_CTRL MSR during boot and re-use reserved bits
[ tglx: Distangled it from the intel implementation and kept the call order ]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Make kernel print the correct number of TLB entries on Intel Xeon Phi 7210
(and others)
Before:
[ 0.320005] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
After:
[ 0.320005] Last level dTLB entries: 4KB 256, 2MB 128, 4MB 128, 1GB 16
The entries do exist in the official Intel SMD but the type column there is
incorrect (states "Cache" where it should read "TLB"), but the entries for
the values 0x6B, 0x6C and 0x6D are correctly described as 'Data TLB'.
Signed-off-by: Jacek Tomaka <jacek.tomaka@poczta.fm>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20180423161425.24366-1-jacekt@dugeo.com
Despite the fact that all the other code there seems to be doing it, just
using set_cpu_cap() in early_intel_init() doesn't actually work.
For CPUs with PKU support, setup_pku() calls get_cpu_cap() after
c->c_init() has set those feature bits. That resets those bits back to what
was queried from the hardware.
Turning the bits off for bad microcode is easy to fix. That can just use
setup_clear_cpu_cap() to force them off for all CPUs.
I was less keen on forcing the feature bits *on* that way, just in case
of inconsistencies. I appreciate that the kernel is going to get this
utterly wrong if CPU features are not consistent, because it has already
applied alternatives by the time secondary CPUs are brought up.
But at least if setup_force_cpu_cap() isn't being used, we might have a
chance of *detecting* the lack of the corresponding bit and either
panicking or refusing to bring the offending CPU online.
So ensure that the appropriate feature bits are set within get_cpu_cap()
regardless of how many extra times it's called.
Fixes: 2961298e ("x86/cpufeatures: Clean up Spectre v2 related CPUID flags")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: karahmed@amazon.de
Cc: peterz@infradead.org
Cc: bp@alien8.de
Link: https://lkml.kernel.org/r/1517322623-15261-1-git-send-email-dwmw@amazon.co.uk
Time has come to switch PTI development over to a v4.15 base - we'll still
try to make sure that all PTI fixes backport cleanly to v4.14 and earlier.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We want to expose the hardware features simply in /proc/cpuinfo as "ibrs",
"ibpb" and "stibp". Since AMD has separate CPUID bits for those, use them
as the user-visible bits.
When the Intel SPEC_CTRL bit is set which indicates both IBRS and IBPB
capability, set those (AMD) bits accordingly. Likewise if the Intel STIBP
bit is set, set the AMD STIBP that's used for the generic hardware
capability.
Hide the rest from /proc/cpuinfo by putting "" in the comments. Including
RETPOLINE and RETPOLINE_AMD which shouldn't be visible there. There are
patches to make the sysfs vulnerabilities information non-readable by
non-root, and the same should apply to all information about which
mitigations are actually in use. Those *shouldn't* appear in /proc/cpuinfo.
The feature bit for whether IBPB is actually used, which is needed for
ALTERNATIVEs, is renamed to X86_FEATURE_USE_IBPB.
Originally-by: Borislav Petkov <bp@suse.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: ak@linux.intel.com
Cc: dave.hansen@intel.com
Cc: karahmed@amazon.de
Cc: arjan@linux.intel.com
Cc: torvalds@linux-foundation.org
Cc: peterz@infradead.org
Cc: bp@alien8.de
Cc: pbonzini@redhat.com
Cc: tim.c.chen@linux.intel.com
Cc: gregkh@linux-foundation.org
Link: https://lkml.kernel.org/r/1517070274-12128-2-git-send-email-dwmw@amazon.co.uk
