Pull "Allwinner fixes for 4.13" from Chen-Yu Tsai:
Two fixes to correct the EMAC blocks memory region size to match the
datasheet. One that converts raw A83T clock indices to macros from the
clk dt-binding header, completing the A83T sunxi-ng clk driver.
* tag 'sunxi-fixes-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sun8i: a83t: Switch to CCU device tree binding macros
arm64: allwinner: sun50i-a64: Correct emac register size
ARM: dts: sunxi: h3/h5: Correct emac register size
Pull "mvebu fixes for 4.13 (part 2)" from Gregory CLEMENT:
All the fixes are for ARM64 mvebu:
- Fix the RTC interrupt on A7K/A8K which was missed when switching
from GIC to ICU
- Mark the A7K/A8K crypto engine as dma coherent
- Fix the number of GPIO on south bridge on Armada 3700
* tag 'mvebu-fixes-4.13-2' of git://git.infradead.org/linux-mvebu:
ARM64: dts: marvell: armada-37xx: Fix the number of GPIO on south bridge
arm64: dts: marvell: mark the cp110 crypto engine as dma coherent
arm64: dts: marvell: use ICU for the CP110 slave RTC
Pull "Amlogic fixes for v4.13-rc" from Kevin Hilman:
- 2 minor DT fixes
* tag 'amlogic-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM64: dts: meson-gxl-s905x-libretech-cc: fixup board definition
ARM64: dts: meson-gx: use specific compatible for the AO pwms
The number of pins in South Bridge is 30 and not 29. There is a fix for
the driver for the pinctrl, but a fix is also need at device tree level
for the GPIO.
Fixes: afda007fed ("ARM64: dts: marvell: Add pinctrl nodes for Armada
3700")
Cc: <stable@vger.kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The datasheet said that emac register size is 0x10000 not 0x100
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
[wens@csie.org: Fixed commit subject prefix]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Pull "Second Round of Renesas ARM Based SoC Fixes for v4.13" from Simon Horman:
Correct order of sound clock frequencies for ULCB boards
used by r8a7795 and r8a7796 SoCs.
These sounds clock frequencies are used as the ADG clock (output clocks
for audio module) initial setting and sound codec's initial system clock
which needs the maximum clock frequency. Thus, descending order is
required.
* tag 'renesas-fixes2-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: dts: renesas: ulcb: sound clock-frequency needs descending order
Pull "Renesas ARM Based SoC Fixes for v4.13" from Simon Horman:
Correct order of sound clock frequencies for Salvator boards
used by r8a7795 and r8a7796 SoCs.
These sounds clock frequencies are used as the ADG clock (output clocks
for audio module) initial setting and sound codec's initial system clock
which needs the maximum clock frequency. Thus, descending order is
required.
* tag 'renesas-fixes-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: renesas: salvator-common: sound clock-frequency needs descending order
The libretech CC derives less from the p212 than initially thought.
Several voltage regulators are different and the capabilities of the
sdcard and emmc also differ.
Deriving from the p212 is not convient anymore so the libretech is now
derived from s905x definition directly.
Fixes: cd84aff1d9 ("ARM64: dts: meson-gxl: Add Libre Technology CC support")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Use the specific compatible for AO pwms so the pwms input can
be correctly set
FDIV4 is not present on the pwm A0, so change kadhas vim input
clocks to xtal.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
When the conversion of the Marvell CP110 Device Tree description from
using GIC interrupts to using ICU interrupts was done, the RTC on the
slave CP110 was left unchanged. This commit fixes that, so that all
devices on the CP properly get their interrupt through the ICU.
Fixes: 6ef84a827c ("arm64: dts: marvell: enable GICP and ICU on Armada 7K/8K")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Correct order of sound clock frequencies for ULCB boards
used with r8a7795 and r8a7796 SoCs.
These sounds clock frequencies are used as the ADG clock (output clocks
for audio module) initial setting and sound codec's initial system clock
which needs the maximum clock frequency. Thus, descending order is
required.
Fixes: 9f22774c21 ("arm64: dts: ulcb: add 12288000 for sound ADG")
Signed-off-by: Vladimir Barinov <vladimir.barinov+renesas@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
[simon: rewrote changelog]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Pull networking updates from David Miller:
"Reasonably busy this cycle, but perhaps not as busy as in the 4.12
merge window:
1) Several optimizations for UDP processing under high load from
Paolo Abeni.
2) Support pacing internally in TCP when using the sch_fq packet
scheduler for this is not practical. From Eric Dumazet.
3) Support mutliple filter chains per qdisc, from Jiri Pirko.
4) Move to 1ms TCP timestamp clock, from Eric Dumazet.
5) Add batch dequeueing to vhost_net, from Jason Wang.
6) Flesh out more completely SCTP checksum offload support, from
Davide Caratti.
7) More plumbing of extended netlink ACKs, from David Ahern, Pablo
Neira Ayuso, and Matthias Schiffer.
8) Add devlink support to nfp driver, from Simon Horman.
9) Add RTM_F_FIB_MATCH flag to RTM_GETROUTE queries, from Roopa
Prabhu.
10) Add stack depth tracking to BPF verifier and use this information
in the various eBPF JITs. From Alexei Starovoitov.
11) Support XDP on qed device VFs, from Yuval Mintz.
12) Introduce BPF PROG ID for better introspection of installed BPF
programs. From Martin KaFai Lau.
13) Add bpf_set_hash helper for TC bpf programs, from Daniel Borkmann.
14) For loads, allow narrower accesses in bpf verifier checking, from
Yonghong Song.
15) Support MIPS in the BPF selftests and samples infrastructure, the
MIPS eBPF JIT will be merged in via the MIPS GIT tree. From David
Daney.
16) Support kernel based TLS, from Dave Watson and others.
17) Remove completely DST garbage collection, from Wei Wang.
18) Allow installing TCP MD5 rules using prefixes, from Ivan
Delalande.
19) Add XDP support to Intel i40e driver, from Björn Töpel
20) Add support for TC flower offload in nfp driver, from Simon
Horman, Pieter Jansen van Vuuren, Benjamin LaHaise, Jakub
Kicinski, and Bert van Leeuwen.
21) IPSEC offloading support in mlx5, from Ilan Tayari.
22) Add HW PTP support to macb driver, from Rafal Ozieblo.
23) Networking refcount_t conversions, From Elena Reshetova.
24) Add sock_ops support to BPF, from Lawrence Brako. This is useful
for tuning the TCP sockopt settings of a group of applications,
currently via CGROUPs"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1899 commits)
net: phy: dp83867: add workaround for incorrect RX_CTRL pin strap
dt-bindings: phy: dp83867: provide a workaround for incorrect RX_CTRL pin strap
cxgb4: Support for get_ts_info ethtool method
cxgb4: Add PTP Hardware Clock (PHC) support
cxgb4: time stamping interface for PTP
nfp: default to chained metadata prepend format
nfp: remove legacy MAC address lookup
nfp: improve order of interfaces in breakout mode
net: macb: remove extraneous return when MACB_EXT_DESC is defined
bpf: add missing break in for the TCP_BPF_SNDCWND_CLAMP case
bpf: fix return in load_bpf_file
mpls: fix rtm policy in mpls_getroute
net, ax25: convert ax25_cb.refcount from atomic_t to refcount_t
net, ax25: convert ax25_route.refcount from atomic_t to refcount_t
net, ax25: convert ax25_uid_assoc.refcount from atomic_t to refcount_t
net, sctp: convert sctp_ep_common.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_transport.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_chunk.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_datamsg.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_auth_bytes.refcnt from atomic_t to refcount_t
...
Pull ARM 64-bit DT updates from Arnd Bergmann:
"Device-tree updates for arm64 platforms. For the first time I can
remember, this is actually larger than the corresponding branch for
32-bit platforms overall, though that has more individual changes.
A significant portion this time is due to added machine support:
- Initial support for the Realtek RTD1295 SoC, along with the Zidoo
X9S set-top-box
- Initial support for Actions Semi S900 and the Bubblegum-96
single-board-cёmputer.
- Rockchips support for the rk3399-Firefly single-board-computer gets
added, this one stands out for being relatively fast, affordable
and well₋supported, compared to many boards that only fall into one
or two of the above categories.
- Mediatek gains support for the mt6797 mobile-phone SoC platform and
corresponding evaluation board.
- Amlogic board support gets added for the NanoPi K2 and S905x
LibreTech CC single-board computers and the R-Box Pro set-top-box
- Allwinner board support gets added for the OrangePi Win, Orangepi
Zero Plus 2, NanoPi NEO2 and Orange Pi Prime single board computers
and the SoPine system-on-module.
- Renesas board support for Salvator-XS and H3ULCB automotive
development systems.
- Socionext Uniphier board support for LD11-global and LD20-global,
whatever those may be.
- Broadcom adds support for the new Stingray communication processor
in its iProc family, along with two reference boards.
Other updates include:
- For the hisicon platform, support for Hi3660-Hikey960 gets extended
significantly.
- Lots of smaller updates for Renesas, Amlogic, Rockchip, UniPhier,
Broadcom, Allwinner, Hisilicon, Qualcomm, Marvell, and NXP"
* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (243 commits)
ARM64: dts: marvell: armada37xx: Fix timer interrupt specifiers
Revert "arm64: dts: marvell: add dma-mask in crypto nodes for 7k/8k"
arm64: dts: mediatek: don't include missing file
ARM64: dts: meson-gxl: Add Libre Technology CC support
dt-bindings: arm: amlogic: Add Libre Technology CC board
dt-bindings: add Libre Technology vendor prefix
arm64: dts: marvell: enable GICP and ICU on Armada 7K/8K
arm64: dts: zte: Use - instead of @ for DT OPP entries
arm64: dts: marvell: add gpio support for Armada 7K/8K
arm64: dts: marvell: add pinctrl support for Armada 7K/8K
arm64: dts: marvell: use new binding for the system controller on cp110
arm64: dts: marvell: remove *-clock-output-names on cp110
arm64: dts: marvell: use new bindings for xor clocks on ap806
arm64: dts: marvell: mcbin: enable the mdio node
arm64: dts: Add Actions Semi S900 and Bubblegum-96
dt-bindings: Add vendor prefix for uCRobotics
arm64: dts: marvell: add xmdio nodes for 7k/8k
arm64: dts: marvell: add a comment on the cp110 slave node status
arm64: dts: marvell: remove cpm crypto nodes from dts files
arm64: dts: marvell: cp110: enable the crypto engine at the SoC level
...
Pull char/misc updates from Greg KH:
"Here is the "big" char/misc driver patchset for 4.13-rc1.
Lots of stuff in here, a large thunderbolt update, w1 driver header
reorg, the new mux driver subsystem, google firmware driver updates,
and a raft of other smaller things. Full details in the shortlog.
All of these have been in linux-next for a while with the only
reported issue being a merge problem with this tree and the jc-docs
tree in the w1 documentation area"
* tag 'char-misc-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (147 commits)
misc: apds990x: Use sysfs_match_string() helper
mei: drop unreachable code in mei_start
mei: validate the message header only in first fragment.
DocBook: w1: Update W1 file locations and names in DocBook
mux: adg792a: always require I2C support
nvmem: rockchip-efuse: add support for rk322x-efuse
nvmem: core: add locking to nvmem_find_cell
nvmem: core: Call put_device() in nvmem_unregister()
nvmem: core: fix leaks on registration errors
nvmem: correct Broadcom OTP controller driver writes
w1: Add subsystem kernel public interface
drivers/fsi: Add module license to core driver
drivers/fsi: Use asynchronous slave mode
drivers/fsi: Add hub master support
drivers/fsi: Add SCOM FSI client device driver
drivers/fsi/gpio: Add tracepoints for GPIO master
drivers/fsi: Add GPIO based FSI master
drivers/fsi: Document FSI master sysfs files in ABI
drivers/fsi: Add error handling for slave
drivers/fsi: Add tracepoints for low-level operations
...
Pull "late dt64 for 4.13" from Gregory CLEMENT:
It is actually a patch that missed the end of the 4.12 merge
window. The patch itself fix a bogus definition of the timer for the
Armada 37xx SoCs.
* tag 'mvebu-dt64-4.13-3' of git://git.infradead.org/linux-mvebu:
ARM64: dts: marvell: armada37xx: Fix timer interrupt specifiers
Contrary to popular belief, PPIs connected to a GICv3 to not have
an affinity field similar to that of GICv2. That is consistent
with the fact that GICv3 is designed to accomodate thousands of
CPUs, and fitting them as a bitmap in a byte is... difficult.
Fixes: adbc3695d9 ("arm64: dts: add the Marvell Armada 3700 family and
a development board")
Cc: <stable@vger.kernel.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
This reverts commits 2c0cba482e ("arm: sun8i: sunxi-h3-h5: Add dt node
for the syscon control module") to 2428fd0fe5 ("arm64: defconfig: Enable
dwmac-sun8i driver on defconfig") and 3432a86e64 ("arm: sun8i:
orangepipc: use internal phy-mode") to 5a79b4f2a5 ("arm: sun8i:
orangepi-2: use internal phy-mode") that should be merged
through the arm-soc tree, and end up in merge conflicts and build failures.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull "Actions Semi ARM64 based SoC DT for 4.13" from Andreas Färber:
This adds an initial DT for the S900 SoC and a devboard based on it.
* tag 'actions-arm64-dt-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions:
arm64: dts: Add Actions Semi S900 and Bubblegum-96
dt-bindings: Add vendor prefix for uCRobotics
As I found by chance while merging another patch, the usage of
a dma-mask in this DT node is wrong for multiple reasons:
- dma-masks are a Linux specific concept, not a general
hardware feature
- In DT, we use the "dma-ranges" property to describe how DMA
addresses related between devices.
- The 40-bit mask appears to be completely unnecessary here, as
the SoC cannot address that much memory anyway, so simply
asking for a 64-bit mask (as supported by the device) should
succeed anyway.
The patch to remove the parsing of the property is getting merged
through the crypto tree.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
mvebu fixes for 4.12
Fix the interrupt description of the crypto node for device tree of
the Armada 7K/8K SoCs
* tag 'mvebu-fixes-4.12-1' of git://git.infradead.org/linux-mvebu:
arm64: marvell: dts: fix interrupts in 7k/8k crypto nodes
Pull "mvebu dt64 for 4.13 (part 2)" from Gregory CLEMENT:
- use new clock binding for Armada 7K/8K
- add pinctrl on Armada 7K/8K
- add GPIO on Armada 7K/8K
- switch from GIC to ICU on CP110 (Armada 7K/8K)
- enable the mdio node on the mcbin (Armada 8K based board)
* tag 'mvebu-dt64-4.13-2' of git://git.infradead.org/linux-mvebu:
arm64: dts: marvell: enable GICP and ICU on Armada 7K/8K
arm64: dts: marvell: add gpio support for Armada 7K/8K
arm64: dts: marvell: add pinctrl support for Armada 7K/8K
arm64: dts: marvell: use new binding for the system controller on cp110
arm64: dts: marvell: remove *-clock-output-names on cp110
arm64: dts: marvell: use new bindings for xor clocks on ap806
arm64: dts: marvell: mcbin: enable the mdio node
Pull "ZTE arm64 device tree updates for 4.13" from Shawn Guo:
- Fix DTC unit_address_vs_reg warnings in OPP entries by replacing
'@' with '-' as the OPP nodes will never have a "reg" property.
* tag 'zte-dt64-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: zte: Use - instead of @ for DT OPP entries
This resolves a build error in the next/dt branch:
In file included from arch/arm64/boot/dts/mediatek/mt6797-evb.dts:16:0:
arch/arm64/boot/dts/mediatek/mt6797.dtsi:15:10: fatal error: dt-bindings/power/mt6797-power.h: No such file or directory
003f5d0c34 ("arm64: dts: mediatek: add clk and scp nodes for MT6797")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Two entries being added at the same time to the IFLA
policy table, whilst parallel bug fixes to decnet
routing dst handling overlapping with the dst gc removal
in net-next.
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit modifies the Marvell EBU Armada 7K and 8K Device Tree files
to describe the ICU and GICP units, and use ICU interrupts for all
devices in the CP110 blocks.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Compiling the DT file with W=1, DTC warns like follows:
Warning (unit_address_vs_reg): Node /opp_table0/opp@1000000000 has a
unit name, but no reg property
Fix this by replacing '@' with '-' as the OPP nodes will never have a
"reg" property.
Reported-by: Krzysztof Kozlowski <krzk@kernel.org>
Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable gpio support for CP and AP on the Marvell Armada 7K/8K SoCs.
The Armada 8K has two CP110 blocks, each having two GPIO controllers.
However, in each CP110 block, one of the GPIO controller cannot be
used: in the master CP110, only the second GPIO controller can be used,
while on the slave CP110, only the first GPIO controller can be used.
On the other side, the Armada 7K has only one CP110, but both its GPIO
controllers can be used.
For this reason, the GPIO controllers are marked as "disabled" in the
armada-cp110-master.dtsi and armada-cp110-slave.dtsi files, and only
enabled in the per-SoC dtsi files.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Enable pinctrl support for CP and AP on the Armada 7K/8K SoCs.
The CP master being different between Armada 7k and Armada 8k. This
commit introduces the intermediates files armada-70x0.dtsi and
armada-80x0.dtsi.
These new files will provide different compatible strings depending of
the SoC family. They will also be the location for the pinmux
configuration at the SoC level.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The new binding for the system controller on cp110 moved the clock
controller into a subnode. This preliminary step will allow to add gpio
and pinctrl subnodes.
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
New bindings are used for the system controller on the ap806, which
means all clock properties must be converted. Use the new bindings in
the xor nodes.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Since the mdio nodes are disabled by default now, we should explicitly
enable these nodes at the board level when they are used. Enable the
cpm_mdio node for the 8040-mcbin.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
It will be used ADG clock initial settings, and will be
sound codec's initial system clock which needs maximum clock frequency.
Thus, descending order is required
Fixes: d37d2b3c0e ("arm64: dts: salvator-x: add 12288000 for sound ADG")
Fixes: 0b03c32db0 ("arm64: dts: r8a7795: salvator-x: Add support for R-Car H3 ES2.0")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Pull ARM SoC fixes from Olof Johansson:
"Stream of fixes has slowed down, only a few this week:
- Some DT fixes for Allwinner platforms, and addition of a clock to
the R_CCU clock controller that had been missed.
- A couple of small DT fixes for am335x-sl50"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm64: allwinner: a64: Add PLL_PERIPH0 clock to the R_CCU
ARM: sunxi: h3-h5: Add PLL_PERIPH0 clock to the R_CCU
ARM: dts: am335x-sl50: Fix cannot claim requested pins for spi0
ARM: dts: am335x-sl50: Fix card detect pin for mmc1
arm64: allwinner: h5: Remove syslink to shared DTSI
ARM: sunxi: h3/h5: fix the compatible of R_CCU
The Freescale arm64 device tree updates for 4.13:
- A series from NXP employee Li Yang that updates the copyright claims
to comply with company policy.
- A patch-set from Madalin Bucur that adds Data Path Acceleration
Architecture (DPAA) QBMan and FMan. Quite a few .dtsi files are
created for SoCs with different DPAA configuration to include the
devices as needed.
- Enable UHS-I SD and eMMC support for LS1046A and LS208xA RDB/QDS
boards.
- Enable TMU device for thermal management support on LS1088A.
- Update SATA device node for LS1088A with correct compatible and ECC
register bit.
- A few small random device tree updates.
* tag 'imx-dt64-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (22 commits)
arm64: dts: ls1088a: update sata node
dt-bindings: ahci-fsl-qoriq: add ls1088a chip name to the list
arm64: dts: ls1012a: Add coreclk
arm64: dts: ls1046a: Add dis_rxdet_inp3_quirk property to USB3 node
arm64: dts: ls208xa: disable SD UHS-I modes by default on RDB
arm64: dts: ls1043a: Add generic compatible string for I2C EEPROM
arm64: dts: add LS1046A DPAA FMan nodes
arm64: dts: add LS1043A DPAA FMan support
arm64: dts: add DPAA FMan nodes
arm64: dts: add LS1046A DPAA QBMan nodes
arm64: dts: add LS1043A DPAA QBMan nodes
arm64: dts: add DPAA QBMan portals
arm64: dts: ls1088a: Add TMU device tree support
arm64: dts: ls1088a: update the sata node
arm64: dts: Add flash node for ls1088a qds and rdb
arm64: dts: ls1088a: add esdhc node
arm64: dts: ls1012a: add eSDHC nodes
arm64: dts: ls208xa: support SD UHS-I on RDB and eMMC HS200 on QDS
arm64: dts: ls1046a: support SD UHS-I and eMMC HS200 on RDB
mmc: dt: add compatible into eSDHC required properties
...
Signed-off-by: Olof Johansson <olof@lixom.net>
mvebu dt64 for 4.13 (part 1)
- Improve the mcbin support (Armada 8040 based board): add sdhci and
the second 1G port
- Improve crypro nodes description on Aramda 7K/8K
- Use new binding for ap806 clocks
- Improve mdio nodes and add xmdio on Aramda 7K/8K
- Add second SGCI node on Armada 37xx
- Improve the description of the Armada 3720 DB board
* tag 'mvebu-dt64-4.13-1' of git://git.infradead.org/linux-mvebu:
arm64: dts: marvell: add xmdio nodes for 7k/8k
arm64: dts: marvell: add a comment on the cp110 slave node status
arm64: dts: marvell: remove cpm crypto nodes from dts files
arm64: dts: marvell: cp110: enable the crypto engine at the SoC level
arm64: dts: marvell: armada-3720-db: Add vqmmc regulator for SD slot
arm64: dts: marvell: Enable second SDHCI controller in Armada 37xx
arm64: dts: marvell: armada-37xx: Use angle bracket for each register set
arm64: dts: marvell: armada-37xx: Align the compatible string
arm64: dts: marvell: armada-3720-db: Add information about the V2 board
arm64: dts: marvell: armada-3720-db: Sort the dts node alphabetically
arm64: dts: marvell: disable the mdio nodes by default
arm64: dts: marvell: explicitly enable the mdio nodes for 7k/8k DB
arm64: dts: marvell: add dma-mask in crypto nodes for 7k/8k
arm64: dts: marvell: 8040-mcbin: Enable 1GB Ethernet
arm64: dts: marvell: cp110: add required clocks for mdio interface
arm64: dts: marvell: use new binding for the system controller on ap806
arm64: dts: marvell: remove clock-output-names on ap806
arm64: dts: marvell: add second 1G port on the Armada 8040 DB
arm64: dts: marvell: mcbin: add sdhci
arm64: dts: marvell: add clocks for Armada AP806 XOR engines
Signed-off-by: Olof Johansson <olof@lixom.net>
Second Round of Renesas ARM64 Based SoC DT Updates for v4.13
* Add reset control properties for audio to r9a779[56] SoCs
* Add add DMA for IIC_DVFS to r9a779[56] SoCs
* Add support for Salvator-XS and H3ULCB with R-Car H3 (r8a7795) ES2
* Add missing index to PWM pinctrl subnode name to Salvator-X board
* Add 12288000 for sound ADG to Salvator-X and ULCB boards
* tag 'renesas-arm64-dt2-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: dts: r8a7796: Add reset control properties for audio
arm64: dts: r8a7795: Add reset control properties for audio
arm64: dts: renesas: Add support for Salvator-XS with R-Car H3 ES2.0
arm64: dts: renesas: Add common Salvator-XS board support
arm64: dts: renesas: Extract common Salvator-X/XS board support
arm64: dts: salvator-x: Add missing index to PWM pinctrl subnode name
arm64: dts: r8a7795: h3ulcb: Add support for R-Car H3 ES2.0
arm64: dts: r8a7796: add DMA for IIC_DVFS
arm64: dts: r8a7795: add DMA for IIC_DVFS
arm64: dts: ulcb: add 12288000 for sound ADG
arm64: dts: salvator-x: add 12288000 for sound ADG
Signed-off-by: Olof Johansson <olof@lixom.net>
Qualcomm ARM64 Updates for v4.13
* Fix APQ8016 SBC WLAN LED
* Add MSM8996 CPU node
* Add MSM8992 SMEM and fixed regulator
* Fixup MSM8916 USB support
* tag 'qcom-arm64-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
arm64: dts: apq8016-sbc: Correct WLAN LED default-trigger
arm64: dts: msm8996: Add CPU clock controller node
arm64: dts: smem enablement for msm8992
arm64: dts: msm8992 add fixed regulator
arm64: dts: qcom: Collapse usb support into one node
Signed-off-by: Olof Johansson <olof@lixom.net>
arm64: tegra: Device tree changes for v4.13-rc1
This adds the CCPLEX cluster on Tegra186, which is used to initiate CPU
frequency and voltage transitions.
Also included is a bit of cleanup for PCI related device tree content,
in preparation for a future DTC release that has additional checks for
the PCI bus.
* tag 'tegra-for-4.13-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: dts: nvidia: fix PCI bus dtc warnings
arm64: tegra: Add CCPLEX_CLUSTER area in Tegra186
Signed-off-by: Olof Johansson <olof@lixom.net>
ARMv8 Vexpress/Juno DT updates for v4.13
1. Adds support for Coresight CPU debug MMIO interface on all Juno variants.
2. Enables support for few SMMUs on Juno which were previously disabled
waiting for IOMMU-backed DMA API support to be stabilised.
* tag 'juno-updates-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno: enable some SMMUs
arm64: dts: juno: add coresight CPU debug nodes
Signed-off-by: Olof Johansson <olof@lixom.net>
Allwinner H5 DT changes for 4.13
Just like the H3, this is mostly about enabling the EMAC on the H5, and
also has a new board, the Orange Pi Zero Plus 2
* tag 'sunxi-dt-h5-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: allwinner: h5: Add initial Orangepi Zero Plus 2 support
arm64: allwinner: h5: enable dwmac-sun8i for Nano Pi NEO2
arm64: allwinner: h5: enable dwmac-sun8i for Orange Pi Prime
arm64: allwinner: h5: sort the device nodes in / part for some boards
arm64: allwinner: h5: add support for NanoPi NEO2 board
arm64: allwinner: h5: add support for Orange Pi Prime board
arm64: allwinner: orangepi-pc2: Enable dwmac-sun8i
arm: sun8i: sunxi-h3-h5: add dwmac-sun8i ethernet driver
arm: sun8i: sunxi-h3-h5: Add dt node for the syscon control module
ARM: sunxi: h3-h5: Convert R_CCU raw numbers to macros
Signed-off-by: Olof Johansson <olof@lixom.net>
Allwinner fixes for 4.12
A few fixes around the PRCM support that got in 4.12 with a wrong
compatible, and a missing clock in the binding.
* tag 'sunxi-fixes-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: allwinner: a64: Add PLL_PERIPH0 clock to the R_CCU
ARM: sunxi: h3-h5: Add PLL_PERIPH0 clock to the R_CCU
arm64: allwinner: h5: Remove syslink to shared DTSI
ARM: sunxi: h3/h5: fix the compatible of R_CCU
Signed-off-by: Olof Johansson <olof@lixom.net>
Allwinner arm64 DT changes for 4.13
Our usual arm64 changes. The most notable things are the EMAC support and
USB support enhancements. There's also support for the SoPine SoM, and the
OrangePi Win.
* tag 'sunxi-dt64-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: allwinner: a64: Add initial Orangepi Win/WinPlus support
arm64: allwinner: a64: add device tree for SoPine with baseboard
arm64: allwinner: bananapi-m64: Enable dwmac-sun8i
arm64: allwinner: pine64-plus: Enable dwmac-sun8i
arm64: allwinner: pine64: Enable dwmac-sun8i
arm64: allwinner: sun50i-a64: add dwmac-sun8i Ethernet driver
arm64: allwinner: sun50i-a64: Add dt node for the syscon control module
arm64: allwinner: a64: add DTSI file for SoPine SoM
arm64: allwinner: a64: Convert CCU raw number references to macros
arm64: dts: allwinner: pine64: Prepare optional UART nodes with pinctrl
arm64: allwinner: a64: enable RSB on A64
arm64: dts: allwinner: pine64: Add remaining UART aliases
arm64: dts: allwinner: a64: Add UART2 pin nodes
arm64: allwinner: a64: enable EHCI0/OHCI0 for Pine64
arm64: allwinner: a64: add EHCI0/OHCI0 nodes to A64 DTSI
Signed-off-by: Olof Johansson <olof@lixom.net>
This pull request contains Broadcom ARM64-based SoCs Device Tree changes for
4.13. Please note the following from Eric:
I've based this summary on the bcm2835-dt-next tag, to clarify what's in this
patch series, but it does require being careful since it involves a cross-merge
between branches.
- Anup documents the Broadcom Stingray binding, common clocks, adds initial
support for the Stingray DTSI and DTS files and adds support for the PL022,
PL330 and SP805
- Sandeep adds the clock nodes to the Stingray Device Tree nodes
- Pramod adds support for the NAND, pinctrl, GPIO to the Stingray Device Tree nodes
- Oza adds I2C Device Tree nodes to the Stingray DTSes
- Srinath adds PWM and SDHCI Device Tree nodes for the Stingray SoC
- Ravijeta adds support for the USB Dual Role PHY on Northstar 2
- Gerd starts adding references to the sdhost and sdhci controllers, and then
switches the sdcard to to use the SDHOST (faster than SDHCI)
- Stefan defines the BCM2837 thermal coefficients in order for the Raspberry Pi
thermal driver to work correctly
* tag 'arm-soc/for-4.13/devicetree-arm64' of http://github.com/Broadcom/stblinux:
arm64: dts: NS2: Add USB DRD PHY device tree node
ARM64: dts: bcm2837: Define CPU thermal coefficients
arm64: dts: Add PWM and SDHCI DT nodes for Stingray SOC
arm64: dts: Add PL022, PL330 and SP805 DT nodes for Stingray
arm64: dts: Add I2C DT nodes for Stingray SoC
arm64: dts: Add GPIO DT nodes for Stingray SOC
arm64: dts: Add pinctrl DT nodes for Stingray SOC
arm64: dts: Add NAND DT nodes for Stingray SOC
arm64: dts: Add clock DT nodes for Stingray SOC
arm64: dts: Initial DTS files for Broadcom Stingray SOC
dt-bindings: clk: Extend binding doc for Stingray SOC
dt-bindings: bcm: Add Broadcom Stingray bindings document
ARM: dts: bcm283x: switch from &sdhci to &sdhost
arm64: dts: bcm2837: add &sdhci and &sdhost
ARM: dts: bcm283x: Add CPU thermal zone with 1 trip point
ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v6)
Signed-off-by: Olof Johansson <olof@lixom.net>
UniPhier ARM64 SoC DT updates for v4.13
- specify timing delay properties of eMMC
- fix W=1 build warnings
- increase memory reserve size
- use SPDX License Identifier
- add new board support (LD11/LD20 global)
* tag 'uniphier-dt64-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
arm64: dts: uniphier: add support for LD20 Global board
arm64: dts: uniphier: add support for LD11 Global board
arm64: dts: uniphier: use SPDX-License-Identifier
arm64: dts: uniphier: reserve more memory for LD11/LD20
arm64: dts: uniphier: fix simple-bus unit address format error
arm64: dts: uniphier: Use - instead of @ for DT OPP entries
arm64: dts: uniphier: add cdns, phy-dll-delay-sdclk(-hsmmc) for eMMC
arm64: dts: uniphier: add input-delay properties to Cadence eMMC node
Signed-off-by: Olof Johansson <olof@lixom.net>
