Add support for the IPQ4019 PCIe controller. IPQ4019 supports Gen 1/2, one
lane, one PCIe root complex with support for MSI and legacy interrupts, and
it conforms to PCI Express Base 2.1 specification.
The core init is the same as for the MSM8996, however the clocks and reset
lines differ.
[bhelgaas: fix qcom_pcie_get_resources_v3(), qcom_pcie_init_v3() compile
issues]
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Acked-by: Rob Herring <robh@kernel.org> # binding
Some boards might require to control a regulator to power the PCIe port.
Add support for an optional regulator defined in Device Tree linked in the
PCIe controller under `vpcie-supply`. If present, the regulator will be
disabled and then enabled as part of the PCIe host initialization process
and will be disabled when shutting down.
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
[bhelgaas: use dev_err() instead of pr_err() in
imx6_pcie_assert_core_reset()]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
The Faraday FTPCI100 controller has two clock ports, PCLK and PCICLK. Add
bindings for these two clocks so we can assign them in the device tree.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rob Herring <robh@kernel.org>
Samuel Ortiz says:
====================
NFC 4.13 pull request
This is the NFC pull requesy for 4.13. We have:
- A conversion to unified device and GPIO APIs for the
fdp, pn544, and st{21,-nci} drivers.
- A fix for NFC device IDs allocation.
- A fix for the nfcmrvl driver firmware download mechanism.
- A trf7970a DT and GPIO cleanup and clock setting fix.
- A few fixes for potential overflows in the digital and LLCP code.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
* 'binding-doc-cp110-ap806' of git://git.infradead.org/linux-mvebu:
gpio: dt-bindings: Add documentation for gpio controllers on Armada 7K/8K
pinctrl: dt-bindings: add documentation for CP110 pin controllers
pinctrl: dt-bindings: add documentation for AP806 pin controllers
dt-bindings: cp110: add sdio clock to cp-110 system controller
dt-bindings: cp110: introduce a new binding
dt-bindings: cp110: do not depend anymore of the *-clock-output-names
RISC-V systems use device tree to specify the memory layout of the
system. This patch reserves the "riscv" vendor prefix, which will be
used for devices that are specified by the various RISC-V ISA
specifications.
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Rob Herring <robh@kernel.org>
The audio-graph-card should be able to support widgets and routing in
the same way as what simple-audio-card does. The patch adds the
properties into audio-graph-card bindings. Then an optional property
'pa-gpios' for controlling external amplifier, which depends on DAPM
widgets and routing, is added.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The property type of "nuvoton,crosstalk-bypass" changes to boolean.
The document is updated as well.
Signed-off-by: John Hsu <KCHSU0@nuvoton.com>
Signed-off-by: John Hsu <supercraig0719@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull "Actions Semi SoC drivers for 4.13" from Andreas Färber:
This adds clock source and power domain drivers for S500/S900.
* tag 'actions-drivers-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions:
soc: actions: owl-sps: Factor out owl_sps_set_pg() for power-gating
soc: actions: Add Owl SPS
dt-bindings: power: Add Owl SPS power domains
clocksource: owl: Add S900 support
clocksource: Add Owl timer
Pull "Actions Semi ARM SoC for v4.13 #2" from Andreas Färber:
This adds SMP code to bring up the remaining S500 CPU cores
by reusing a helper factored out of the SPS power domains driver.
* tag 'actions-arm-soc+sps-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions:
ARM: owl: smp: Implement SPS power-gating for CPU2 and CPU3
soc: actions: owl-sps: Factor out owl_sps_set_pg() for power-gating
soc: actions: Add Owl SPS
dt-bindings: power: Add Owl SPS power domains
Pull "Actions Semi ARM64 based SoC DT for 4.13" from Andreas Färber:
This adds an initial DT for the S900 SoC and a devboard based on it.
* tag 'actions-arm64-dt-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions:
arm64: dts: Add Actions Semi S900 and Bubblegum-96
dt-bindings: Add vendor prefix for uCRobotics
By default, dw_mmc-rockchip will execute tuning for each degree.
So we won't miss every point of the good sample windows. However,
probably the phases are linear inside the good sample window.
Actually we don't need to do tuning for each degree so that we could
save some time, for instance, probe the driver or resume from S3.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Pull "Actions Semi ARM based SoC DT for v4.13" from Andreas Färber:
This adds an initial DT for the S500 SoC and a devboard based on it.
* tag 'actions-arm-dt-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions:
ARM: dts: owl-s500: Add SPS node
ARM: dts: owl-s500: Set CPU enable-method
dt-bindings: arm: cpus: Add S500 enable-method
ARM: dts: Add Actions Semi S500 and LeMaker Guitar
dt-bindings: arm: Document Actions Semi S900
dt-bindings: timer: Document Owl timer
dt-bindings: arm: Document Actions Semi S500
dt-bindings: Add vendor prefix for Actions Semi
The size of the DMA buffer can affect the delta time between data being
produced and data being consumed. Basically the DMA system will move
data to tty buffer when a) DMA buffer is full b) serial line is idle.
The situation is visible when producer generates data continuously and
there is no possibility for idle line. At this point the DMA buffer is
directly affecting the delta time.
The patch will add the possibility to configure the DMA buffers in DT,
which case by case can be configured separately for every driver
instance. The DT configuration is optional and in case missing the
driver will use the 4096 buffer with 4 periods (as before), therefore no
clients are impacted by this change.
Signed-off-by: Nandor Han <nandor.han@ge.com>
Signed-off-by: Romain Perier <romain.perier@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pinctrl: sh-pfc: Updates for v4.13 (take two)
- Add SCIF1 and SCIF2 pin groups for R-Car V2H,
- Add EtherAVB, DU parallel RGB output, and PWM pin groups for R-Car
H3 ES2.0,
- Add pin and gpio controller support for RZ/A1.
Add output-enable generic pin configuration property.
This properties allows enabling/disabling pin's output capabilities
without actually driving any value on the line.
Acked-by: Rob Herring <robh@kernel.org>
[Added inline elaborations on buffer enabling/disabling]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
ALSA SoC needs to know connected DAI ID for probing. Using
the new audio-card-graph approach, ports/endpoints are used
to describe how the links are connected. Unfortunately, since
ports/endpoints are used as well for video linkages, there
are some issues mixing the port ids to the two (video and
audio) namespaces.
To solve this issue, this patch adds new .get_dai_id callback
on hdmi_codec_ops.
The will assume that HDMI audio out will be connected to
reg = <2>. This will then be remapped to the ALSA SoC side will
as DAI 0. Allowing the adv7511's hdmi audio support to be used
with the audio-card-graph.
Credit to Kuninori Morimoto who's patch to dw-hdmi-i2s-audio.c
was what this was mostly copy-pasted from.
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Linux-ALSA <alsa-devel@alsa-project.org>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC needs to know connected DAI ID for probing.
It is not a big problem if device/driver was only for sound,
but getting DAI ID will be difficult if device includes both
Video/Sound, like HDMI.
To solve this issue, this patch adds new .get_dai_id callback
on hdmi_codec_ops.
dw-hdmi-i2s will assume that HDMI sound will be connected
to reg = <2>. Then, ALSA SoC side will recognized it as DAI 0
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
/* HDMI Video IN */
};
port@1 {
reg = <1>;
/* HDMI OUT */
};
port@2 {
reg = <2>;
/* HDMI Sound IN */
};
};
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch aligns example with the optional property description,
removes status and replace spidev unvalid compatible with
Aarvark SPI Host Adapter one.
In slave mode, Aardvark SPI Host Adapter requires 4ms delay
between the end of byte n and the start of byte n+1, hence the
use of the optional property st,spi-midi-ns.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch replaces st,stm32-spi compatible with st,stm32h7-spi SoC
specific compatible and updates the example accondingly.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Some LEDs can be related to a specific device(s) described in the DT.
This property allows specifying such relations. E.g. USB LED should
usually be used to indicate some USB port(s) state.
Please note this binding is designed to be generic and not influenced by
any operating system design. Linux developers may find "trigger" part a
bit confusing since in Linux triggers are separated drivers. It
shouldn't define the binding though (we shouldn't add an extra level of
indirection).
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Document the device tree binding for the gpio controllers found on the
Marvell Armada 7K and Armada 8K SoCs.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Document the binding for the Broadcom STB SoCs wake-up timer node
allowing the system to generate alarms and exit low power states.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Jonathan writes:
Second set of IIO new device support, features and cleanups for the 4.13 cycle.
A few reverts here. One was a general failure to notice a device was already
supported by another driver. The second is due to a review comment pointing
out that the original patch was a bad idea and would break existing systems.
Reverts
* bma180
- Revert addition of support for the BMA250E it is already supported by
the bmc150-accel and better supported at that. Oops.
* hi8435
- The fix for cleanup of the reset gpio stuff isn't a good way to go. It
breaks systems where an inverting level convertor is used. The right fix
is to make the original devicetree correct - even if it involves patching
the devicetree in kernel.
New Device Support
* stm32-adc
- STM32H7 support and bindings.
Features
* core
- add a hardware triggered operating mode for systems in which the actual
trigger is never seen by the kernel. This is typically only used when
a device 'can' use other triggers, but if a particular magic one is
enabled the interrupt is effectively handled in hardware and we never see
it.
* st-lsm6dsx
- support active low interrupts.
* stm32-adc
- Make the core adc clock optional as not all hardware supported requires it.
- Make the bus clock optional in the per instance driver as it may be shared
by all instances of the ADC and is handled by the core.
- Rework to have a data structure representing the device type specific
elements.
* stm32-trigger (and counter)
- Use the INDIO_HARDWARE_TRIGGERED_MODE where appropriate.
- Add an attribute to configure device modes for quadrature counting etc.
Clean ups and minor fixes
* IIO core.
- use __sysfs_match_string() helper rather than open coding the same.
* ad7791
- use sysfs_match_string() helper rather than open coding the same.
* aspeed-adc
- handle return value of clk_prepare_enable
* cpcap
- Fix default register values and ensure the battery thermistor is enabled
correctly.
- Fix the reported die temperature where we can - docs are lacking.
- Remove the hung interrupt quirk as no longer happens due to fix in the
mfd driver.
* hi8435
- Remove &s from hi8435_info definition as unneeded and inconsistent.
* hid-sensor-trgger
- Add kconfig depends on IIO_BUFFER (fixes patch in previous series)
* ina2xx
- Make the use of iio_info_mask* elements consistent for all channels.
This doesn't have any visible effect, but acts as clear documentation of
which channels various resulting attributes apply to.
* lpc32xx
- handle the return value of clk_prepare_enable.
* meson-saradc
- NULL instead of 0 for pointer.
* mma9551
- use NULL for GPIO connection ID to aid implementation fo ACPI support.
Here the connection ID doesn't actually tell us anything and it is much
easier to deal with the driver if it's not there.
* mpu6050
- Fix lock issues through use of a local mux.
- Replace sprintf with scnprintf as appropriate.
- Check whoami against all known values. This allows for a small number of
boards where we are really fishing for the part not being present at all.
It is unfortunately common to have undescribed changes to use newer chips.
We paper over this but just emitting a warning for those cases as long as
we know about.
* mxs-lradc
- Fix some non static warnings.
* rcar-adc
- Part of making the naming for this part consistent across the kernel.
* st_accel
- drop some spi_device_id entries for variants with no SPI support
* st_magn
- drop some spi_device_id entries for variants with no SPI support.
* sx9500
- Use devm_gpiod_get instead of indexed value with an index of 0 on all
occasions.
* twl4030
- Drop unused twl4030_get_madc_conversion as callers removed now throughout
kernel.
- Unexport twl4030_madc_conversion() as no used only within this driver.
- Drop twl4030_madc_user_params as not used now.
- Drop twl4030_madc_request.func_cb as not used now.
- Fold the twl4030-madc.h header into the driver as no longer used anywhere
else in the kernel.
* xilinx
- Handle the return value of clk_prepare_enable
Kalle Valo says:
====================
wireless-drivers-next patches for 4.13
New features and bug fixes to quite a few different drivers, but
nothing really special standing out.
What makes me happy that we have now more vendors actively
contributing to upstream drivers. In this pull request we have patches
from Broadcom, Intel, Qualcomm, Realtek and Redpine Signals, and I
still have patches from Marvell and Quantenna pending in patchwork. Now
that's something comparing to how things looked 11 years ago in Jeff
Garzik's "State of the Union: Wireless" email:
https://lkml.org/lkml/2006/1/5/671
Major changes:
wil6210
* add low level RF sector interface via nl80211 vendor commands
* add module parameter ftm_mode to load separate firmware for factory
testing
* support devices with different PCIe bar size
* add support for PCIe D3hot in system suspend
* remove ioctl interface which should not be in a wireless driver
ath10k
* go back to using dma_alloc_coherent() for firmware scratch memory
* add per chain RSSI reporting
brcmfmac
* add support multi-scheduled scan
* add scheduled scan support for specified BSSIDs
* add support for brcm43430 revision 0
wlcore
* add wil1285 compatible
rsi
* add RS9113 USB support
iwlwifi
* FW API documentation improvements (for tools and htmldoc)
* continuing work for the new A000 family
* bump the maximum supported FW API to 31
* improve the differentiation between 8000, 9000 and A000 families
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull GPIO fix from Linus Walleij:
"A single GPIO patch fixing the compatible string for the MVEBU PWM
controller embedded in the GPIO controller before we release v4.12.
Hopefully"
* tag 'gpio-v4.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: mvebu: change compatible string for PWM support
Compiling the DT file with W=1, DTC warns like follows:
Warning (unit_address_vs_reg): Node /opp_table0/opp@1000000000 has a
unit name, but no reg property
Fix this by replacing '@' with '-' as the OPP nodes will never have a
"reg" property.
Reported-by: Krzysztof Kozlowski <krzk@kernel.org>
Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
