QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
qxl wants to use io mapping like i915 gem does, for now
just export the symbols so the driver can implement atomic
page maps using io mapping.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Instead of open-coding ACPI GPIO resource lookup in each driver, we provide
a helper function analogous to Device Tree version that allows drivers to
specify which GPIO resource they are interested (using an index to the GPIO
resources). The function then finds out the correct resource, translates
the ACPI GPIO number to the corresponding Linux GPIO number and returns
that.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This patch allows iscsiadm to manage iSCSI target information stored on
adapter flash on per host basis.
The sysfs entries will look as cited below:
/sys/bus/iscsi_flashnode/devices/flashnode_sess-<host_no>:<flashnode_id>/<session attrs>
/sys/bus/iscsi_flashnode/devices/flashnode_conn-<host_no>:<flashnode_id>:<conn_id>/<conn attrs>
Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com>
Signed-off-by: Manish Rangankar <manish.rangankar@qlogic.com>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Steffen Klassert says:
====================
1) Allow to avoid copying DSCP during encapsulation
by setting a SA flag. From Nicolas Dichtel.
2) Constify the netlink dispatch table, no need to modify it
at runtime. From Mathias Krause.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The registers for the Samsung S3C serial port are currently defined in
the platform specific arch/arm/plat-samsung/include/plat/regs-serial.h
file, which is not visible to multiplatform capable drivers.
Unfortunately, it is not possible to move the file into a more local
place as we should normally try to, because the same registers
may be used in one of four places:
* In the driver itself
* In platform-independent ARM code for early debug output
* In platform_data definitions
* In the Samsung platform power management code
I have also found no way to logically split out a platform_data
file, other than possibly move everything into
include/linux/platform_data, which also felt wrong. The only
part of this file that makes sense to keep specific to the s3c24xx
platform are the virtual and physical addresses defined here,
which are needed in no other location.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The link change is detected via the interrupt pipe, and bulk
pipes are responsible for transfering packets, so it is reasonable
to stop bulk transfer after link is reported as off.
Two adavantages may be obtained with stopping bulk transfer
after link becomes off:
- USB bus bandwidth is saved(USB bus is shared bus except for
USB3.0), for example, lots of 'IN' token packets and 'NYET'
handshake packets is transfered on 2.0 bus.
- probabaly power might be saved for usb host controller since
cancelling bulk transfer may disable the asynchronous schedule of
host controller.
With this patch, when link becomes off, about ~10% performance
boost can be found on bulk transfer of anther usb device which
is attached to same bus with the usbnet device, see below
test on next-20130410:
- read from usb mass storage(Sandisk Extreme USB 3.0) on pandaboard
with below command after unplugging ethernet cable:
dd if=/dev/sda iflag=direct of=/dev/null bs=1M count=800
- without the patch
1, 838860800 bytes (839 MB) copied, 36.2216 s, 23.2 MB/s
2, 838860800 bytes (839 MB) copied, 35.8368 s, 23.4 MB/s
3, 838860800 bytes (839 MB) copied, 35.823 s, 23.4 MB/s
4, 838860800 bytes (839 MB) copied, 35.937 s, 23.3 MB/s
5, 838860800 bytes (839 MB) copied, 35.7365 s, 23.5 MB/s
average: 23.6MB/s
- with the patch
1, 838860800 bytes (839 MB) copied, 32.3817 s, 25.9 MB/s
2, 838860800 bytes (839 MB) copied, 31.7389 s, 26.4 MB/s
3, 838860800 bytes (839 MB) copied, 32.438 s, 25.9 MB/s
4, 838860800 bytes (839 MB) copied, 32.5492 s, 25.8 MB/s
5, 838860800 bytes (839 MB) copied, 31.6178 s, 26.5 MB/s
average: 26.1MB/s
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch introduces the API of usbnet_link_change, so that
usbnet can handle link change centrally, which may help to
implement killing traffic URBs for saving USB bus bandwidth
and host controller power.
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We use _get() and _put() for device ref-counting in the kernel. However,
hci_conn_put() is _not_ used for ref-counting, hence, rename it to
hci_conn_drop() so we can later fix ref-counting and introduce
hci_conn_put().
hci_conn_hold() and hci_conn_put() are currently used to manage how long a
connection should be held alive. When the last user drops the connection,
we spawn a delayed work that performs the disconnect. Obviously, this has
nothing to do with ref-counting for the _object_ but rather for the
keep-alive of the connection.
But we really _need_ proper ref-counting for the _object_ to allow
connection-users like rfcomm-tty, HIDP or others.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Now that devtmpfs is caring about uid/gid, we need to use the correct
internal types so users who have USER_NS enabled will have things work
properly for them.
Thanks to Eric for pointing this out, and the patch review.
Reported-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Kay Sievers <kay@vrfy.org>
Cc: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allow userspace to query for the tile mode array so userspace can properly
compute surface pitch and alignment requirement depending on tiling.
v2: Make strict aliasing safer by casting to char when copying
v3: merge fix from Christian
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The s3c-fb driver requires header files from the samsung platforms
to find its platform_data definition, but this no longer works on
multiplatform kernels, so let's move the data into a new header
file under include/linux/platform_data.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: linux-fbdev@vger.kernel.org
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
From Maxime Ripard:
Cleanups for Allwinner sunXi architecture:
- Remove sunxi.dtsi
- Switch to clocksource/irqchip device tree handlers
- Cleanup the watchdog code
* tag 'sunxi-cleanup-for-3.10' of git://github.com/mripard/linux:
ARM: sunxi: Rework the restart code
irqchip: sunxi: Rename sunxi to sun4i
irqchip: sunxi: Make use of the IRQCHIP_DECLARE macro
clocksource: sunxi: Rename sunxi to sun4i
clocksource: sunxi: make use of CLKSRC_OF
clocksource: sunxi: Cleanup the timer code
clocksource: make CLOCKSOURCE_OF_DECLARE type safe
Signed-off-by: Olof Johansson <olof@lixom.net>
Add/change conflict in drivers/clocksource/Makefile resolved.
Bringin in clk subsystem dependencies needed by sunxi.
* depends/clk-for-3.10: (26 commits)
clk: sunxi: drop an unnecesary kmalloc
clk: sunxi: drop CLK_IGNORE_UNUSED
clk: sunxi: Add support for AXI, AHB, APB0 and APB1 gates
clk: divider: Introduce CLK_DIVIDER_ALLOW_ZERO flag
clk: mvebu: Use common of_clk_init() function
clk: fix clk_mux::flags kerneldoc
clk: allow reentrant calls into the clk framework
clk: abstract locking out into helper functions
clk: zynq: Add missing zynq clk header
clk: sunxi: rename compatible strings
arm: sunxi: Add useful information about sunxi clocks
clk: arm: sunxi: Add a new clock driver for sunxi SOCs
clk: ux500: Fix prcmu clocks registration
ARM: imx: adapt clk_busy_mux to new clk_mux struct
clk: Add composite clock type
clk: add table lookup to mux
clk: Fix incorrect return type in clk.c
clk: prima2: fix return value check in sirfsoc_of_clk_init()
clk:SPEAr1340: Correct parent clock configuration
documentation: clk: fix couple of misspelling
...
A series dealing with gpio configuration cleanup from Haojian Zhuang.
* 'armsoc/pxa' of git://github.com/hzhuang1/linux:
ARM: pxa: move debug uart code
ARM: pxa: select PXA935 on saar & tavorevb
ARM: mmp: add more compatible names in gpio driver
ARM: pxa: move PXA_GPIO_TO_IRQ macro
ARM: pxa: remove cpu_is_xxx in gpio driver
Signed-off-by: Olof Johansson <olof@lixom.net>
Since PXA_GPIO_TO_IRQ() & MMP_GPIO_TO_IRQ() macro are depended on
arch code, move them from gpio driver to platform driver instead.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Notifiers may return NOTIFY_(OK|DONE|STOP|BAD). The CCF uses an
inconsistent mix of checking against NOTIFY_STOP or NOTIFY_BAD.
This inconsistency leaves errors undetected in some cases:
clk_set_parent() calls __clk_speculate_rates(), which stops when it
hits a NOTIFIER_BAD (STOP is ignored), and passes this value back to the
caller.
clk_set_parent() compares this return value against NOTIFY_STOP only,
ignoring NOTIFY_BAD returns.
Use NOTIFY_STOP_MASK to detect a negative notifier return value and
document all four return value options.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Commit 0d1c28a (gpiolib-acpi: Add ACPI5 event model support to gpio.)
that added support for ACPI events signalled through GPIO interrupts
covered only GPIO pins whose numbers are less than or equal to 255.
However, there may be GPIO pins with numbers greater than 255 and
the ACPI spec (ACPI 5.0, Section 5.6.5.1) requires the _EVT method
to be used for handling events corresponding to those pins.
Moreover, according to the spec, _EVT is the default mechanism
for handling all ACPI events signalled through GPIO interrupts,
so if the _Exx/_Lxx method is not present for the given pin,
_EVT should be used instead. If present, though, _Exx/_Lxx take
precedence over _EVT which shouldn't be executed in that case
(ACPI 5.0, Section 5.6.5.3).
Modify acpi_gpiochip_request_interrupts() to follow the spec as
described above and add acpi_gpiochip_free_interrupts() needed
to free interrupts associated with _EVT.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
There is no general support for 64-bit big endian accesses, so that is
left unsupported.
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Acked-by: Anton Vorontsov <anton@enomsg.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Pull networking fixes from David Miller:
1) cfg80211_conn_scan() must be called with the sched_scan_mutex, fix
from Artem Savkov.
2) Fix regression in TCP ICMPv6 processing, we do not want to treat
redirects as socket errors, from Christoph Paasch.
3) Fix several recvmsg() msg_name kernel memory leaks into userspace,
in ATM, AX25, Bluetooth, CAIF, IRDA, s390 IUCV, L2TP, LLC, Netrom,
NFC, Rose, TIPC, and VSOCK. From Mathias Krause and Wei Yongjun.
4) Fix AF_IUCV handling of segmented SKBs in recvmsg(), from Ursula
Braun and Eric Dumazet.
5) CAN gw.c code does kfree() on SLAB cache memory, use
kmem_cache_free() instead. Fix from Wei Yongjun.
6) Fix LSM regression on TCP SYN/ACKs, some LSMs such as SELINUX want
an skb->sk socket context available for these packets, but nothing
else requires it. From Eric Dumazet and Paul Moore.
7) Fix ipv4 address lifetime processing so that we don't perform
sleepable acts inside of rcu_read_lock() sections, do them in an
rtnl_lock() section instead. From Jiri Pirko.
8) mvneta driver accidently sets HW features after device registry, it
should do so beforehand. Fix from Willy Tarreau.
9) Fix bonding unload races more correctly, from Nikolay Aleksandrov
and Veaceslav Falico.
10) rtnl_dump_ifinfo() and rtnl_calcit() invoke nlmsg_parse() with wrong
header size argument. Fix from Michael Riesch.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits)
lsm: add the missing documentation for the security_skb_owned_by() hook
bnx2x: Prevent null pointer dereference in AFEX mode
e100: Add dma mapping error check
selinux: add a skb_owned_by() hook
can: gw: use kmem_cache_free() instead of kfree()
netrom: fix invalid use of sizeof in nr_recvmsg()
qeth: fix qeth_wait_for_threads() deadlock for OSN devices
af_iucv: fix recvmsg by replacing skb_pull() function
rtnetlink: Call nlmsg_parse() with correct header length
bonding: fix bonding_masters race condition in bond unloading
Revert "bonding: remove sysfs before removing devices"
net: mvneta: enable features before registering the driver
hyperv: Fix RNDIS send_completion code path
hyperv: Fix a kernel warning from netvsc_linkstatus_callback()
net: ipv4: fix schedule while atomic bug in check_lifetime()
net: ipv4: reset check_lifetime_work after changing lifetime
bnx2x: Fix KR2 rapid link flap
sctp: remove 'sridhar' from maintainers list
VSOCK: Fix missing msg_namelen update in vsock_stream_recvmsg()
VSOCK: vmci - fix possible info leak in vmci_transport_dgram_dequeue()
...
Unfortunately we didn't catch the missing comments earlier when the
patch was merged.
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some drivers need SSID in AP and IBSS mode. AP SSID is provided
through BSS_CHANGED_SSID notification. There was no easy way to
do the same for IBSS. In IBSS mode SSID is known but was not
stored in BSS configuration. Extend the AP-mode functionality
to also work in IBSS mode.
Signed-off-by: Marek Puzyniak <marek.puzyniak@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
A couple controllers want to determine whether two cgroups are in
ancestor/descendant relationship. As it's more likely that the
descendant is the primary subject of interest and there are other
operations focusing on the descendants, let's ask is_descendent rather
than is_ancestor.
Implementation is trivial as the previous patch guarantees that all
ancestors of a cgroup stay accessible as long as the cgroup is
accessible.
tj: Removed depth optimization, renamed from cgroup_is_ancestor(),
rewrote descriptions.
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The bind() method of cgroup_subsys is not used in any of the
controllers (cpuset, freezer, blkio, net_cls, memcg, net_prio,
devices, perf, hugetlb, cpu and cpuacct)
tj: Removed the entry on ->bind() from
Documentation/cgroups/cgroups.txt. Also updated a couple
paragraphs which were suggesting that dynamic re-binding may be
implemented. It's not gonna.
Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
__audit_socketcall is an extern function.
better to check its parameters by itself.
also can return error code, when fail (find invalid parameters).
also use macro instead of real hard code number
also give related comments for it.
Signed-off-by: Chen Gang <gang.chen@asianux.com>
[eparis: fix the return value when !CONFIG_AUDIT]
Signed-off-by: Eric Paris <eparis@redhat.com>
Commit b05d8447e7 (audit: inline audit_syscall_entry to reduce
burden on archs) changed audit_syscall_entry to check for a dummy
context before calling __audit_syscall_entry. Unfortunately the dummy
context state is maintained in __audit_syscall_entry so once set it
never gets cleared, even if the audit rules change.
As a result, if there are no auditing rules when a process starts
then it will never be subject to any rules added later. x86 doesn't
see this because it has an assembly fast path that calls directly into
__audit_syscall_entry.
I noticed this issue when working on audit performance optimisations.
I wrote a set of simple test cases available at:
http://ozlabs.org/~anton/junkcode/audit_tests.tar.gz
02_new_rule.py fails without the patch and passes with it. The
test case clears all rules, starts a process, adds a rule then
verifies the process produces a syscall audit record.
Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: <stable@kernel.org> # 3.3+
Signed-off-by: Eric Paris <eparis@redhat.com>
The __weak annotation on the pcibios_get_phb_of_node() declaration
causes *every* definition to be marked "weak." The linker then
selects one based on link order, which may be the wrong one.
Gabor found that on MIPS, the linker selected the generic implementation
from drivers/pci even though arch/mips supplied a definition without the
__weak annotation:
$ mipsel-openwrt-linux-readelf -s arch/mips/pci/built-in.o \
drivers/pci/built-in.o vmlinux.o | grep pcibios_get_phb_of_node
86: 0000046c 12 FUNC WEAK DEFAULT 2 pcibios_get_phb_of_node
1430: 00012e2c 104 FUNC WEAK DEFAULT 2 pcibios_get_phb_of_node
31898: 0017e4ec 104 FUNC WEAK DEFAULT 2 pcibios_get_phb_of_node
This removes the __weak annotation from the pcibios_get_phb_of_node()
declaration so arch-specific non-weak implementations work reliably.
Suggested-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
And make use of it in b43. This fixes a regression introduced with
49d55cef5b
b43: N-PHY: implement spurious tone avoidance
This commit made BCM4322 use only MCS 0 on channel 13, which of course
resulted in performance drop (down to 0.7Mb/s).
Reported-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Fixes build error on x86_64 allmodconfig, introduced by commit
5ab3a89a74 ("mfd: syscon: Add non-DT support").
drivers/regulator/anatop-regulator.c: In function 'anatop_regulator_probe':
drivers/regulator/anatop-regulator.c:134:2: error: implicit declaration of function 'of_get_parent' [-Werror=implicit-function-declaration]
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Pull DT C pre-processor changes from Stephen Warren:
dt: run C pre-processor on *.dts, create some standard headers
This branch enhances the support for running dtc on device tree files.
A dedicated directory is created for header files that provide constants
for device-tree bindings.
The kbuild dependency script processor is enhanced to support processing
the dependency outputs from multiple separate commands at once.
The kbuild dtc rule is modified so that the C pre-processor is always
applied when compiling any device tree.
Some standard headers are created which define common constants for GPIO,
IRQ, and ARM GIC device tree bindings.
Fix the following compilation warnings (in Simon Horman's renesas.git repo):
In file included from arch/arm/mach-shmobile/setup-r8a7779.c:24:0:
include/linux/of_platform.h:107:13: warning: ‘struct of_device_id’ declared
inside parameter list [enabled by default]
include/linux/of_platform.h:107:13: warning: its scope is only this definition
or declaration, which is probably not what you want [enabled by default]
include/linux/of_platform.h:107:13: warning: ‘struct device_node’ declared
inside parameter list [enabled by default]
<linux/of_platform.h> only #include's headers with definitions of the above
mentioned structures if CONFIG_OF_DEVICE=y but uses them even if not. One
solution is to move some #include's out of #ifdef CONFIG_OF_DEVICE and use
incomplete declarations for the rest of the structures where the #ifdef move
doesn't help...
Reported-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Pull vfs fixes from Al Viro:
"A nasty bug in fs/namespace.c caught by Andrey + a couple of less
serious unpleasantness - ecryptfs misc device playing hopeless games
with try_module_get() and palinfo procfs support being... not quite
correctly done, to be polite."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
mnt: release locks on error path in do_loopback
palinfo fixes
procfs: add proc_remove_subtree()
ecryptfs: close rmmod race
If a resize is triggered the nomatch flag is not excluded at hashing,
which leads to the element missed at lookup in the resized set.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>