Daniel pointed out that it was hard to get anything lockless to work
correctly, so don't even try for this non critical piece of code and
just use a spin lock.
v2: Make intel_pipe_crc->opened a bool
v3: Use assert_spin_locked() instead of a comment (Daniel Vetter)
v4: Use spin_lock_irq() in the debugfs functions (they can only be
called from process context),
Use spin_lock() in the pipe_crc_update() function that can only be
called from an interrupt handler,
Use wait_event_interruptible_lock_irq() when waiting for data in the
cicular buffer to ensure proper locking around the condition we are
waiting for. (Daniel Vetter)
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
So far the modeset code enabled all power domains if it needed any. It
wasn't a problem since HW generations so far only had one always-on
power well and one dynamic power well that can be enabled/disabled. For
domains powered by always-on power wells (panel fitter on pipe A and the
eDP transcoder) we didn't do anything, for all other domains we just
enabled the single dynamic power well.
Future HW generations will change this, as they add multiple dynamic
power wells. Support for these will be added later, this patch prepares
for those by making sure we only enable the required domains.
Note that after this change on HSW we'll enable all power domains even
if it was the domain for the panel fitter on pipe A or the eDP
transcoder. This isn't a problem since the power domain framework
already checks if the domain is on an always-on power well and doesn't
do anything in this case.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We'll need the same functionality for other HW generations. The support
for these will be added by upcoming patches.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
There is no hard need for this to be a spin lock, as we don't take these
locks in irq context from anywhere. An upcoming patch will add calls to
punit read/write functions from within regions protected by this lock
and those functions need a mutex in turn. As a solution for that convert
the spin lock to be a mutex.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
It is just cleaner this way and makes it easier to add support for
other HW generations with always-on power wells powering a different
set of domains.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Upcoming patches will add tracking for a set of power domains via a
bitmask; to make things simple there remove the current gap in the
enum values.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
- Give them an _irq_handler postfix, like all the other irq stuff.
- Shuffle the DEBUG_FS=n dummy functions around a bit. This is prep
work to extract all the crc debug stuff into intel_display_testing.c
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Really simple, and we don't even have working frame numbers.
v2: Actually enable it ...
v3: Review from Ville:
- Unconditionally enable the border in the CRC checksum for
consistency with gen3+.
- Handle the "none" source to be able to disable the CRC machinery
again.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
On pre-gen5 and vlv we can't use the pipe source when TV-out or a DP
port is connected to the pipe. Hence we need to expose new CRC
sources.
Also simplify the existing pipe source platform code a bit by
rejecting all unhandled sources by default.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The PIPE_B #define was missing the display mmio offset. Use the
_PIPE_INC macro instead, it's simpler.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
A bit a mess, since with DP/TV outputs we can't use the pipe CRC.
Also, no plane CRCs, so we need to update the basic testcases.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Should work down to gen2. The #defines for the interrupt sources are
already there in PIPESTAT and are the same on all gmch platforms for
gen2 up to vlv.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Since we use intel_enable_rc6() now for more than just when we're
enabling RC6, we'll see this message many times, and it is just
confusing.
As an example, calc_residency calls this function whenever poked via
sysfs. This leaves the impression in dmesg that we're constantly
re-enabling RC6.
While at it, move the defines and description from drv.h to intel_pm.c,
since these are only ever used in that code.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In 3.12 I changed audio to be enabled by default,
but you still had to turn it on via xrandr. This
was confusing to users so change it to minic the
previous behavior:
- audio option is set to -1 (auto) by default which is
the current 3.12 behavior (audio is enabled but requires
xrandr to turn it on).
- if audio = 1, the audio is enabled without needing
to mess with xrandr (previous behavior)
- audio = 0 disables audio
It retains the new feature of allowing the user to enable
audio on the fly with xrandr, but turns audio on
automatically if radeon.audio=1 is set which is what
most users expect.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
This only seem to work for H.264 but not for VC-1 streams.
Need to investigate further why exactly.
This reverts commit 4b40e59212.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds ARGB hardware cursor support to the DRM driver for the
Marvell Armada SoCs. ARGB cursors are supported at either 32x64 or
64x32 resolutions.
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This is useful with the follow-up patch that frobs
dev_priv->vbt.edp_bpp, and the value no longer comes directly from
VBT.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Once the machine gets to a certain point in the suspend process, we
expect the GPU to be idle. If it is not, we might corrupt memory.
Empirically (with an early version of this patch) we have seen this is
not the case. We cannot currently explain why the latent GPU writes
occur.
In the technical sense, this patch is a workaround in that we have an
issue we can't explain, and the patch indirectly solves the issue.
However, it's really better than a workaround because we understand why
it works, and it really should be a safe thing to do in all cases.
The noticeable effect other than the debug messages would be an increase
in the suspend time. I have not measure how expensive it actually is.
I think it would be good to spend further time to root cause why we're
seeing these latent writes, but it shouldn't preclude preventing the
fallout.
NOTE: It should be safe (and makes some sense IMO) to also keep the
VALID bit unset on resume when we clear_range(). I've opted not to do
this as properly clearing those bits at some later point would be extra
work.
v2: Fix bugzilla link
Bugzilla: http://bugs.freedesktop.org/show_bug.cgi?id=65496
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59321
Tested-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Tested-By: Todd Previte <tprevite@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We need this to work around a corruption when the boot kernel image
loads the hibernated kernel image from swap on Haswell systems -
somehow not everything is properly shut off.
This is just the prep work, the next patch will implement the actual
workaround.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Add a commit message suitable for -fixes and add cc: stable]
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Wed Jun 5 13:34:23 2013 +0200
drm/i915: consolidate pch pll enable sequence
I've removed all the code from this if block, but somehow forgotten to
kill the block itself.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
hw designers decided to change the CRC registers and coalesce them all
into one. Otherwise nothing changed. I've opted for a new hsw_ version
to grab the crc sample since hsw+1 will have the same crc registers,
but different interrupt source registers. So this little helper
function will come handy there.
Also refactor the display error handler with a neat pipe loop.
v2: Use for_each_pipe.
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We've set up all files, but removed only those for which we have a
pipe. Which leaves the one for pipe C on machines with less than 2
pipes, breaking module reload.
v2: We can't get at the drm device this early (wtf), so just register
all the files and also remove them all again.
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We enable the interrupt unconditionally and only control it
through the enable bit in the CRC control register.
v2: Extract per-platform helpers to compute the register values.
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Also add a new _PIPE_INC macro which takes an base plus increment.
Much less likely to botch the job by missing an s/A/B/ somewhere.
v2: They've moved the bitfield. Argh!
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The ringbuffer update logic should always be the same, but different
platforms have different amounts of CRC registers. Hence extract it.
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This will be needed for setting the HDMI pixel clock for audio
config. No functional changes.
v2: Now with a commit message.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
It's better to catch such fallout early, and this way we can rely on
the checking done by the drm core on fb->heigh/width at modeset time.
If we ever support planar formats on intel we might want to look into
a common helper to do all this, but for now this is good enough.
v2: Take tiling into account, requested by Ville.
v3: Fix tile height on gen2, spotted by Ville.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Requested-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Following files contains code that is common to all intel mid
soc's. So renamed them as below.
mrst/mrst.c -> intel-mid/intel-mid.c
mrst/vrtc.c -> intel-mid/intel_mid_vrtc.c
mrst/early_printk_mrst.c -> intel-mid/intel_mid_vrtc.c
pci/mrst.c -> pci/intel_mid_pci.c
Also, renamed the corresponding header files and made changes
to the driver files that included these header files.
To ensure that there are no functional changes, I have compared
the objdump of renamed files before and after rename and found
that the only difference is file name change.
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: http://lkml.kernel.org/r/1382049336-21316-4-git-send-email-david.a.cohen@linux.intel.com
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
At least on linux sizeof(long) == sizeof(void*) and the thinking
is that you can grab about as many references as there's memory.
Doesn't really matter, just a bit of OCD since the fixed size data
type in a pure in-kernel datastructure look off.
v2: Ville asked for an overflow check since no one prevents userspace
from incrementing the pin count forever.
v3: s/INT/LONG/, noticed by Chris.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
