In the discovery thread, ibmvfc does a vhost->task_set++ without any lock
held. This could result in two targets getting the same cancel key, which
could have strange effects in error recovery. The actual probability of
this occurring should be extremely small, since this should all be done in
a single threaded loop from the discovery thread, but let's fix it up
anyway to be safe.
Link: https://lore.kernel.org/r/1600286999-22059-1-git-send-email-brking@linux.vnet.ibm.com
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
All files in this driver directory contain the following notice:
See LICENSE.qla2xxx for copyright and licensing details.
LICENSE.qla2xxx can be found in Documentation/scsi/. The file contains:
- A copyright notice
This copyright notice is redundant as all files contain the same
copyright notice already
- A license notice
You may modify and redistribute the device driver code under the
GNU General Public License (a copy of which is attached hereto as
Exhibit A) published by the Free Software Foundation (version 2).
This can be replaced with the corresponding SPDX license identifier
(GPL-2.0-only) in the source files which reference this license
file.
- The full GPLv2 license text
A redundant copy of LICENSES/preferred/GPL-2.0
Remove the notices and add the SPDX license identifier GPL-2.0-only to the
source files.
Finally remove the now redundant LICENSE.qla2xxx file.
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Acked-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All files in this driver directory contain the following notice:
See LICENSE.qla4xxx for copyright and licensing details.
LICENSE.qla4xxx can be found in Documentation/scsi/. The file contains:
- A copyright notice
This copyright notice is redundant as all files contain the same
copyright notice already
- A license notice
You may modify and redistribute the device driver code under the
GNU General Public License (a copy of which is attached hereto as
Exhibit A) published by the Free Software Foundation (version 2).
- The full GPLv2 license text
This can be replaced with the corresponding SPDX license identifier
(GPL-2.0-only) in the source files which reference this license
file.
- The full GPLv2 license text
A redundant copy of LICENSES/preferred/GPL-2.0
Remove the notices and add the SPDX license identifier GPL-2.0-only to the
source files.
Finally remove the now redundant LICENSE.qla4xxx file.
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
VirtIO 1.0 spec says:
The removed and rescan events ... when sent for LUN 0, they MAY
apply to the entire target so the driver can ask the initiator
to rescan the target to detect this.
This change introduces the behaviour described above by scanning the entire
SCSI target when LUN is set to 0. This is both a functional and a
performance fix. It aligns the driver with the spec and allows control
planes to hotplug targets with large numbers of LUNs without having to
request a RESCAN for each one of them.
Link: https://lore.kernel.org/r/CY4PR02MB33354370E0A81E75DD9DFE74FB520@CY4PR02MB3335.namprd02.prod.outlook.com
Suggested-by: Felipe Franciosi <felipe@nutanix.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Matej Genci <matej.genci@nutanix.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This addresses the following sparse warning:
drivers/scsi/myrb.c:2229:27: warning: symbol 'myrb_template' was not
declared. Should it be static?
drivers/scsi/myrb.c:2318:31: warning: symbol 'myrb_raid_functions' was
not declared. Should it be static?
drivers/scsi/myrb.c:2492:6: warning: symbol 'myrb_err_status' was not
declared. Should it be static?
Link: https://lore.kernel.org/r/20200915084018.2826922-1-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This addresses the following sparse warning:
drivers/scsi/myrs.c:1532:5: warning: symbol 'myrs_host_reset' was not
declared. Should it be static?
drivers/scsi/myrs.c:1922:27: warning: symbol 'myrs_template' was not
declared. Should it be static?
drivers/scsi/myrs.c:2036:31: warning: symbol 'myrs_raid_functions' was
not declared. Should it be static?
drivers/scsi/myrs.c:2046:6: warning: symbol 'myrs_flush_cache' was not
declared. Should it be static?
Link: https://lore.kernel.org/r/20200915084008.2826835-1-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This eliminates the following sparse warning:
drivers/scsi/bnx2fc/bnx2fc_fcoe.c:53:1: warning: symbol
'bnx2fc_global_lock' was not declared. Should it be static?
drivers/scsi/bnx2fc/bnx2fc_fcoe.c:111:6: warning: symbol
'bnx2fc_devloss_tmo' was not declared. Should it be static?
drivers/scsi/bnx2fc/bnx2fc_fcoe.c:116:6: warning: symbol
'bnx2fc_max_luns' was not declared. Should it be static?
drivers/scsi/bnx2fc/bnx2fc_fcoe.c:121:6: warning: symbol
'bnx2fc_queue_depth' was not declared. Should it be static?
drivers/scsi/bnx2fc/bnx2fc_fcoe.c:126:6: warning: symbol
'bnx2fc_log_fka' was not declared. Should it be static?
Link: https://lore.kernel.org/r/20200912033758.142601-1-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This eliminates the following sparse warning:
drivers/scsi/aacraid/aachba.c:245:5: warning: symbol 'aac_convert_sgl'
was not declared. Should it be static?
drivers/scsi/aacraid/aachba.c:293:5: warning: symbol 'acbsize' was not
declared. Should it be static?
drivers/scsi/aacraid/aachba.c:324:5: warning: symbol 'aac_wwn' was not
declared. Should it be static?
Link: https://lore.kernel.org/r/20200912033749.142488-1-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When a canister on a FS9100, or similar storage, running in NPIV mode, is
rebooted, its WWPNs will fail over to another canister. When this occurs,
we see a WWPN going away from the fabric at one N-Port ID, and, a short
time later, the same WWPN appears at a different N-Port ID. When the
canister is fully operational again, the WWPNs fail back to the original
canister. If there is any I/O outstanding to the target when this occurs,
it will result in the implicit logout the ibmvfc driver issues before
removing the rport to fail. When the WWPN then shows up at a different
N-Port ID, and we issue a PLOGI to it, the VIOS will see that it still has
a login for this WWPN at the old N-Port ID, which results in the VIOS
simulating a link down / link up sequence to the client, in order to get
the VIOS and client LPAR in sync.
The patch below improves the way we handle this scenario so as to avoid the
link bounce, which affects all targets under the virtual host adapter. The
change is to utilize the Move Login MAD, which will work even when I/O is
outstanding to the target. The change only alters the target state machine
for the case where the implicit logout fails prior to deleting the rport.
If this implicit logout fails, we defer deleting the ibmvfc_target object
after calling fc_remote_port_delete. This enables us to later retry the
implicit logout after terminate_rport_io occurs, or to issue the Move Login
request if a WWPN shows up at a new N-Port ID prior to this occurring.
This has been tested by IBM's storage interoperability team on a FS9100,
forcing the failover to occur. With debug tracing enabled in the ibmvfc
driver, we confirmed the move login was sent in this scenario and confirmed
the link bounce no longer occurred.
[mkp: fix checkpatch warnings]
Link: https://lore.kernel.org/r/1599859706-8505-1-git-send-email-brking@linux.vnet.ibm.com
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Boot occasionally fails with some Samsung low-power UFS devices. The reason
is that these devices have a little bit higher latency for NOP OUT
responses. This causes boot to fail because the NOP OUT command is issued
during initialization to check whether the device transport protocol is
ready or not. Increase NOP_OUT_TIMEOUT value from 30 to 50ms.
Link: https://lore.kernel.org/r/231786897.01599016081767.JavaMail.epsvc@epcpadp2
Acked-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Make sure to call sd_zbc_init_disk() when the sdkp->zoned field is known,
that is, once sd_read_block_characteristics() is executed in
sd_revalidate_disk(), so that host-aware disks also get initialized. To do
so, move sd_zbc_init_disk() call in sd_zbc_revalidate_zones() and make sure
to execute it for all zoned disks, including for host-aware disks used as
regular disks as these disk zoned model may be changed back to BLK_ZONED_HA
when partitions are deleted.
Link: https://lore.kernel.org/r/20200915073347.832424-3-damien.lemoal@wdc.com
Fixes: 5795eb4430 ("scsi: sd_zbc: emulate ZONE_APPEND commands")
Cc: <stable@vger.kernel.org> # v5.8+
Reported-by: Borislav Petkov <bp@alien8.de>
Tested-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When CONFIG_BLK_DEV_ZONED is disabled, allow using host-aware ZBC disks as
regular disks. In this case, ensure that command completion is correctly
executed by changing sd_zbc_complete() to return good_bytes instead of 0
and causing a hang during device probe (endless retries).
When CONFIG_BLK_DEV_ZONED is enabled and a host-aware disk is detected to
have partitions, it will be used as a regular disk. In this case, make sure
to not do anything in sd_zbc_revalidate_zones() as that triggers warnings.
Since all these different cases result in subtle settings of the disk queue
zoned model, introduce the block layer helper function
blk_queue_set_zoned() to generically implement setting up the effective
zoned model according to the disk type, the presence of partitions on the
disk and CONFIG_BLK_DEV_ZONED configuration.
Link: https://lore.kernel.org/r/20200915073347.832424-2-damien.lemoal@wdc.com
Fixes: b72053072c ("block: allow partitions on host aware zone devices")
Cc: <stable@vger.kernel.org>
Reported-by: Borislav Petkov <bp@alien8.de>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull SCSI fix from James Bottomley:
"Just one fix in libsas for a resource leak in an error path"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: libsas: Fix error path in sas_notify_lldd_dev_found()
Initial FLOGIs are failing with the following message:
lpfc 0000:13:00.1: 1:(0):0820 FLOGI Failed (x300). BBCredit Not Supported
In a prior patch, the READ_SPARAM command was re-ordered to post after
CONFIG_LINK as the driver is expected to update the driver's copy of the
service parameters for the FLOGI payload. If the bb-credit recovery feature
is enabled, this is fine. But on adapters were bb-credit recovery isn't
enabled, it would cause the FLOGI to fail.
Fix by restoring the original command order (READ_SPARAM before
CONFIG_LINK), and after issuing CONFIG_LINK, detect bb-credit recovery
support and reissuing READ_SPARAM to obtain the updated service parameters
(effectively adding in the fix command order).
[mkp: corrected SHA]
Link: https://lore.kernel.org/r/20200911200147.110826-1-james.smart@broadcom.com
Fixes: 835214f5d5 ("scsi: lpfc: Fix broken Credit Recovery after driver load")
CC: <stable@vger.kernel.org> # v5.7+
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The driver will throw an error message when a tampered type controller
is detected. The intent is to avoid interacting with any firmware
which is not secured/signed by Broadcom. Any tampering on firmware
component will be detected by hardware and it will be communicated to
the driver to avoid any further interaction with that component.
[mkp: switched back to dev_err]
Link: https://lore.kernel.org/r/20200814130426.2741171-1-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Both callers have a valid CD struture available, so rely on that instead
of getting another reference. Also move the function to avoid a forward
declaration.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Switch to use bdev_check_media_change instead of check_disk_change and
call sr_block_revalidate_disk manually. Also add an explicit call to
sr_block_revalidate_disk just before disk_add() to ensure we always
read check for a ready unit and read the TOC and then stop wiring up
->revalidate_disk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Switch to use bdev_check_media_change instead of check_disk_change and
call sd_revalidate_disk manually. As sd also calls sd_revalidate_disk
manually during probe and open, the extra call into ->revalidate_disk
from bdev_disk_changed is not required either, so stop wiring up the
method.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
