One issue exposed after below commit with which the system will freeze
at suspend after vGPU is created (no need to activate the vGPU).
commit e6ba764802 ("drm/i915: Remove i915->kernel_context")
Old implementation pin the intel_context at setup_submission and
unpin it at clean_submission. So after some vGPU is created, the
intel_context is always pinned there although no workload using it.
It will then block i915 enter suspend state.
There is no need to pin it all the time. Pin/unpin it around workload
lifecycle is more reasonable. After GVT enabled suspend/resume, the
pinned intel_context will also get unpined when userspace put VM process
into suspend state since all workloads are retired, then it's safe to
unpin all intel_context for workloads created. So move the pin/unpin to
create_workload and destroy_workload, while still keep the
create/destroy in old place.
V2:
Rebase.
Fixes: e6ba764802 ("drm/i915: Remove i915->kernel_context")
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20201016054059.238371-1-colin.xu@intel.com
While I thought I had this correct (since it actually did reject modes
like I expected during testing), Ville Syrjala from Intel pointed out
that the logic here isn't correct. max_clock refers to the max data rate
supported by the DP encoder. So, limiting it to the output of ds_clock (which
refers to the maximum dotclock of the downstream DP device) doesn't make any
sense. Additionally, since we're using the connector's bpc as the canonical BPC
we should use this in mode_valid until we support dynamically setting the bpp
based on bandwidth constraints.
https://lists.freedesktop.org/archives/dri-devel/2020-September/280276.html
For more info.
So, let's rewrite this using Ville's advice.
v2:
* Ville pointed out I mixed up the dotclock and the link rate. So fix that...
* ...and also rename all the variables in this function to be more appropriately
labeled so I stop mixing them up.
* Reuse the bpp from the connector for now until we have dynamic bpp selection.
* Use use DIV_ROUND_UP for calculating the mode rate like i915 does, which we
should also have been doing from the start
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 409d38139b ("drm/nouveau/kms/nv50-: Use downstream DP clock limits for mode validation")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ville also pointed out that I got a lot of the logic here wrong as well, whoops.
While I don't think anyone's likely using 3D output with nouveau, the next patch
will make nouveau_conn_mode_valid() make a lot less sense. So, let's just get
rid of it and open-code it like before, while taking care to move the 3D frame
packing calculations on the dot clock into the right place.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: d6a9efece7 ("drm/nouveau/kms/nv50-: Share DP SST mode_valid() handling with MST")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.8+
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
With this we try to detect if the endianess switch works and assume LE if
not. Suggested by Ben.
Fixes: 51c05340e4 ("drm/nouveau/device: detect if changing endianness failed")
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Cc: <stable@vger.kernel.org> # v5.8+
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
we can't use nouveau_bo_ref here as no ttm object was allocated and
nouveau_bo_ref mainly deals with that. Simply deallocate the object.
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Not entirely sure why this never came up when I originally tested this
(maybe some BIOSes already have this setup?) but the ->caps_init vfunc
appears to cause the display engine to throw an exception on driver
init, at least on my ThinkPad P72:
nouveau 0000:01:00.0: disp: chid 0 mthd 008c data 00000000 0000508c 0000102b
This is magic nvidia speak for "You need to have the DMA notifier offset
programmed before you can call NV507D_GET_CAPABILITIES." So, let's fix
this by doing that, and also perform an update afterwards to prevent
racing with the GPU when reading capabilities.
v2:
* Don't just program the DMA notifier offset, make sure to actually
perform an update
v3:
* Don't call UPDATE()
* Actually read the correct notifier fields, as apparently the
CAPABILITIES_DONE field lives in a different location than the main
NV_DISP_CORE_NOTIFIER_1 field. As well, 907d+ use a different
CAPABILITIES_DONE field then pre-907d cards.
v4:
* Don't forget to check the return value of core507d_read_caps()
v5:
* Get rid of NV50_DISP_CAPS_NTFY[14], use NV50_DISP_CORE_NTFY
* Disable notifier after calling GetCapabilities()
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 4a2cb4181b ("drm/nouveau/kms/nv50-: Probe SOR and PIOR caps for DP interlacing support")
Cc: <stable@vger.kernel.org> # v5.8+
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The user level OpenCL code shouldn't have to align start and end
addresses to a page boundary. That is better handled in the nouveau
driver. The npages field is also redundant since it can be computed
from the start and end addresses.
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Restore RPS for ILK-M. We lost it when an extra HAS_RPS()
check appeared in intel_rps_enable().
Unfortunaltey this just makes the performance worse on my
ILK because intel_ips insists on limiting the GPU freq to
the minimum. If we don't do the RPS init then intel_ips will
not limit the frequency for whatever reason. Either it can't
get at some required information and thus makes wrong decisions,
or we mess up some weights/etc. and cause it to make the wrong
decisions when RPS init has been done, or the entire thing is
just wrong. Would require a bunch of reverse engineering to
figure out what's going on.
Cc: stable@vger.kernel.org
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: 9c878557b1 ("drm/i915/gt: Use the RPM config register to determine clk frequencies")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201021131443.25616-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 2bf06370bcfb0dea5655e9a5ad460c7f7dca7739)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We are incorrectly limiting the max allocation size as per the mm
max_order, which is effectively the largest power-of-two that we can fit
in the region size. However, it's normal to setup the region or
allocator with a non-power-of-two size(for example 3G), which we should
already handle correctly, except it seems for the early too-big-check.
v2: make sure we also exercise the I915_BO_ALLOC_CONTIGUOUS path, which
is quite different, since for that we are actually limited by the
largest power-of-two that we can fit within the region size. (Chris)
Fixes: b908be543e ("drm/i915: support creating LMEM objects")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: CQ Tang <cq.tang@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201021103606.241395-1-matthew.auld@intel.com
(cherry picked from commit 83ebef47f8ebe320d5c5673db82f9903a4f40a69)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Most of the helpers to retrieve vc4 structures from the DRM base structures
rely on the fact that the first member of the vc4 structure is the DRM one
and just cast the pointers between them.
However, this is pretty fragile especially since there's no check to make
sure that the DRM structure is indeed at the offset 0 in the structure, so
let's use container_of to make it more robust.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201028123752.1733242-1-maxime@cerno.tech
Running "make htmldocs: produce lots of warnings on those files:
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:177: warning: Excess function parameter 'man' description in 'amdgpu_vram_mgr_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:177: warning: Excess function parameter 'p_size' description in 'amdgpu_vram_mgr_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:211: warning: Excess function parameter 'man' description in 'amdgpu_vram_mgr_fini'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:177: warning: Excess function parameter 'man' description in 'amdgpu_vram_mgr_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:177: warning: Excess function parameter 'p_size' description in 'amdgpu_vram_mgr_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:211: warning: Excess function parameter 'man' description in 'amdgpu_vram_mgr_fini'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:177: warning: Excess function parameter 'man' description in 'amdgpu_vram_mgr_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:177: warning: Excess function parameter 'p_size' description in 'amdgpu_vram_mgr_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:211: warning: Excess function parameter 'man' description in 'amdgpu_vram_mgr_fini'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:177: warning: Excess function parameter 'man' description in 'amdgpu_vram_mgr_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:177: warning: Excess function parameter 'p_size' description in 'amdgpu_vram_mgr_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:211: warning: Excess function parameter 'man' description in 'amdgpu_vram_mgr_fini'
./drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c:90: warning: Excess function parameter 'man' description in 'amdgpu_gtt_mgr_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c:90: warning: Excess function parameter 'p_size' description in 'amdgpu_gtt_mgr_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c:134: warning: Excess function parameter 'man' description in 'amdgpu_gtt_mgr_fini'
./drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c:90: warning: Excess function parameter 'man' description in 'amdgpu_gtt_mgr_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c:90: warning: Excess function parameter 'p_size' description in 'amdgpu_gtt_mgr_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c:134: warning: Excess function parameter 'man' description in 'amdgpu_gtt_mgr_fini'
./drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:675: warning: Excess function parameter 'dev' description in 'amdgpu_device_asic_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:675: warning: Excess function parameter 'dev' description in 'amdgpu_device_asic_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:675: warning: Excess function parameter 'dev' description in 'amdgpu_device_asic_init'
./drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:675: warning: Excess function parameter 'dev' description in 'amdgpu_device_asic_init'
They're related to the repacement of some parameters by adev,
and due to a few renamed parameters.
While here, uniform the name of the parameter for it to be
the same on all functions using a pointer to struct amdgpu_device.
Update the kernel-doc documentation accordingly.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/5755c2b361890b8ae5cea0f61dfd70b1c135eefe.1603791716.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
When running the trigger hook, ALSA by default will take a spinlock, and
thus will run the trigger hook in atomic context.
However, our HDMI driver will send the infoframes as part of the trigger
hook, and part of that process is to wait for a bit to be cleared for up to
100ms. To be nicer to the system, that wait has some usleep_range that
interact poorly with the atomic context.
There's several ways we can fix this, but the more obvious one is to make
ALSA take a mutex instead by setting the nonatomic flag on the DAI link.
That doesn't work though, since now the cyclic callback installed by the
dmaengine helpers in ALSA will take a mutex, while that callback is run by
dmaengine's virt-chan code in a tasklet where sleeping is not allowed
either.
Given the delay we need to poll the bit for, changing the usleep_range for
a udelay and keep running it from a context where interrupts are disabled
is not really a good option either.
However, we can move the infoframe setup code in the hw_params hook, like
is usually done in other HDMI controllers, that isn't protected by a
spinlock and thus where we can sleep. Infoframes will be sent on a regular
basis anyway, and since hw_params is where the audio parameters that end up
in the infoframes are setup, this also makes a bit more sense.
Fixes: bb7d785688 ("drm/vc4: Add HDMI audio support")
Suggested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201027101558.427256-1-maxime@cerno.tech
It has been confirmed that the SMU metrics table should always reflect
the current fan speed even in manual mode.
Fixes: 3033e9f1c2de ("drm/amdgpu/swsmu: handle manual fan readback on SMU11")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix the wrong fan speed in fan1_input when the fan control mode is manual.
the fan speed value is not correct when we set manual mode to fan1_enalbe - 1.
since the fan speed in the metrics table always reflects the real fan speed,we
can fetch the fan speed for both auto and manual mode.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
clang warns about functions returning a 'const int' result:
drivers/gpu/drm/imx/imx-tve.c:487:8: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
Remove the extraneous 'const' qualifier here. I would guess that the
function was intended to be marked __attribute__((const)) instead,
but that would also be wrong since it call other functions without
that attribute.
Fixes: fcbc51e54d ("staging: drm/imx: Add support for Television Encoder (TVEv2)")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The edid_len variable is never used again. Use a local variable instead
of storing it in the device structure.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Remove leftover container_of helper, it has been replaced by
bridge_to_imxpd().
Fixes: fe141cedc4 ("drm/imx: pd: Use bus format/flags provided by the bridge when available")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The edid memory is only freed if the component.unbind() is called. This
is okay if the parallel-display was bound but if the bind() fails we
leak the memory.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
[p.zabel@pengutronix.de: rebased, dropped now empty unbind()]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The edid_len variable is never used again. Use a local variable instead
of storing it in the device structure.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This patch simplifies the ASSERT*() and BREAK_TO_DEBUGGER() macros:
- Move the dependency check of CONFIG_KGDB into Kconfig
- Unify the kgdb_breakpoint() call
- Drop the non-existing CONFIG_HAVE_KGDB
Also align the behavior of ASSERT() macro in both cases with and
without CONFIG_DEBUG_KERNEL_DC.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ASSERT_CRITICAL() invokes kgdb_breakpoint() whenever either
CONFIG_KGDB or CONFIG_HAVE_KGDB is set. This, however, may lead to a
kernel panic when no kdb stuff is attached, since the
kgdb_breakpoint() call issues INT3. It's nothing but a surprise for
normal end-users.
For avoiding the pitfall, make the kgdb_breakpoint() call only when
CONFIG_DEBUG_KERNEL_DC is set.
https://bugzilla.opensuse.org/show_bug.cgi?id=1177973
Cc: <stable@vger.kernel.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
get_pixel_clk_frequency_100hz is undefined in clock_source_funcs.
[how]
set function pointer: ".get_pixel_clk_frequency_100hz = get_pixel_clk_frequency_100hz"
Signed-off-by: David Galiffi <David.Galiffi@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
