Current memset implementation in abiv1 is wrong and it'll cause unalign
access. Just remove it and use the generic one. This patch will cause
performance degradation and we will improve it with a new design in next
patchset.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Cc: Arnd Bergmann <arnd@arndb.de>
There are two generations of tlb operation instruction for C-SKY.
First generation is use mcr register and it need software do more
things, second generation is use specific instructions, eg:
tlbi.va, tlbi.vas, tlbi.alls
We implemented the following functions:
- flush_tlb_range (a range of entries)
- flush_tlb_page (one entry)
Above functions use asid from vma->mm to invalid tlb entries and
we could use tlbi.vas instruction for newest generation csky cpu.
- flush_tlb_kernel_range
- flush_tlb_one
Above functions don't care asid and it invalid the tlb entries only
with vpn and we could use tlbi.vaas instruction for newest generat-
ion csky cpu.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Use linux generic asid/vmid algorithm to implement csky
switch_mm function. The algorithm is from arm and it could
work with SMP system. It'll help reduce tlb flush for
switch_mm in task/vm switch.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Cc: Arnd Bergmann <arnd@arndb.de>
This patch only contains asid help code from arm for next patch to
use.
The asid allocator use five level check to reduce the cost of
switch_mm.
1. Check if the asid version is the same (it's general)
2. Check reserved_asid which is set in rollover flush_context()
and key point is to keep the same bit position with the current
asid version instead of input version.
3. Check if the position of bitmap is free then it could be set &
used directly.
4. find_next_zero_bit() (a little performance cost)
5. flush_context (this is the worst cost with increase current asid
version)
Check is level by level and cost is also higher with the next level.
The reserved_asid and bitmap mechanism prevent unnecessary
find_next_zero_bit().
The atomic 64 bit asid is also suitable for 32-bit system and it
won't cost a lot in 1th 2th 3th level check.
The operation of set/clear mm_cpumask was removed in arm64 compared to
arm32. It seems no side effect on current arm64 system, but from
software meaning it's wrong. Although csky also needn't it, we add it
back for csky.
The asid_per_ctxt is no use for csky and it reserves the lowest bits for
other use, maybe: trust zone ? Ok, just keep it in csky copy.
Seems it also could be used by other archs and it's worth to move asid
code to generic in future.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Julien Grall <julien.grall@arm.com>
Current C-SKY ASID mechanism is from mips and it doesn't work well
with multi-cores. ASID per core mechanism is not suitable for C-SKY
SMP tlb maintain operations, eg: tlbi.vas need share the same asid
in all processors and it'll invalid the tlb entry in all cores with
the same asid.
This patch is prepare for new ASID mechanism.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Cc: Arnd Bergmann <arnd@arndb.de>
CK810 pmu only support event with index 0-8 and 0xd; CK860 only
support event 1~4, 0xa~0x1b. So do not register unsupport event
to hardware cache event, which may leader to unknown behavior.
Signed-off-by: Mao Han <han_mao@c-sky.com>
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
csky_pmu_event_init is called several times during the perf record
initialzation. After configure the event counter in either kernel
space or user space, csky_pmu_event_init is called twice with no
attr specified. Configuration will be overwritten with sampling in
both kernel space and user space. --all-kernel/--all-user is
useless without this patch applied.
Signed-off-by: Mao Han <han_mao@c-sky.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
This patch add interrupt request and handler for csky pmu.
perf can record on hardware event with this patch applied.
Signed-off-by: Mao Han <han_mao@c-sky.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
The csky pmu counter may have different io width. When the counter is
smaller then 64 bits and counter value is smaller than the old value, it
will result to a extremely large delta value. So the sampled value should
be extend to 64 bits to avoid this, the extension bits base on the
count-width property from dts.
Signed-off-by: Mao Han <han_mao@c-sky.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
This patch change the csky pmu initialization from arch init to
device init. The pmu can be configued with information from
device tree(pmu device name, irq number and etc.).
Signed-off-by: Mao Han <han_mao@c-sky.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
These traps couldn't be hanppen in kernel and we must panic there not
send a signal to userspace.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Let arch help to select interrupt controller's and timer's drivers
instead of people using menuconfig to select. This help the mini system
boot up.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Cc: Arnd Bergmann <arnd@arndb.de>
The XIVE device structure is now allocated in kvmppc_xive_get_device()
and kfree'd in kvmppc_core_destroy_vm(). In case of an OPAL error when
allocating the XIVE VPs, the kfree() call in kvmppc_xive_*create()
will result in a double free and corrupt the host memory.
Fixes: 5422e95103 ("KVM: PPC: Book3S HV: XIVE: Replace the 'destroy' method by a 'release' method")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/6ea6998b-a890-2511-01d1-747d7621eb19@kaod.org
In the sysctl code the proc_dointvec_minmax() function is often used to
validate the user supplied value between an allowed range. This
function uses the extra1 and extra2 members from struct ctl_table as
minimum and maximum allowed value.
On sysctl handler declaration, in every source file there are some
readonly variables containing just an integer which address is assigned
to the extra1 and extra2 members, so the sysctl range is enforced.
The special values 0, 1 and INT_MAX are very often used as range
boundary, leading duplication of variables like zero=0, one=1,
int_max=INT_MAX in different source files:
$ git grep -E '\.extra[12].*&(zero|one|int_max)' |wc -l
248
Add a const int array containing the most commonly used values, some
macros to refer more easily to the correct array member, and use them
instead of creating a local one for every object file.
This is the bloat-o-meter output comparing the old and new binary
compiled with the default Fedora config:
# scripts/bloat-o-meter -d vmlinux.o.old vmlinux.o
add/remove: 2/2 grow/shrink: 0/2 up/down: 24/-188 (-164)
Data old new delta
sysctl_vals - 12 +12
__kstrtab_sysctl_vals - 12 +12
max 14 10 -4
int_max 16 - -16
one 68 - -68
zero 128 28 -100
Total: Before=20583249, After=20583085, chg -0.00%
[mcroce@redhat.com: tipc: remove two unused variables]
Link: http://lkml.kernel.org/r/20190530091952.4108-1-mcroce@redhat.com
[akpm@linux-foundation.org: fix net/ipv6/sysctl_net_ipv6.c]
[arnd@arndb.de: proc/sysctl: make firmware loader table conditional]
Link: http://lkml.kernel.org/r/20190617130014.1713870-1-arnd@arndb.de
[akpm@linux-foundation.org: fix fs/eventpoll.c]
Link: http://lkml.kernel.org/r/20190430180111.10688-1-mcroce@redhat.com
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Aaron Tomlin <atomlin@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kernel build warns:
'sanitize_boot_params' defined but not used [-Wunused-function]
at below files:
arch/x86/boot/compressed/cmdline.c
arch/x86/boot/compressed/error.c
arch/x86/boot/compressed/early_serial_console.c
arch/x86/boot/compressed/acpi.c
That's becausethey each include misc.h which includes a definition of
sanitize_boot_params() via bootparam_utils.h.
Remove the inclusion from misc.h and have the c file including
bootparam_utils.h directly.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1563283092-1189-1-git-send-email-zhenzhong.duan@oracle.com
Pull RISC-V updates from Paul Walmsley:
- Hugepage support
- "Image" header support for RISC-V kernel binaries, compatible with
the current ARM64 "Image" header
- Initial page table setup now split into two stages
- CONFIG_SOC support (starting with SiFive SoCs)
- Avoid reserving memory between RAM start and the kernel in
setup_bootmem()
- Enable high-res timers and dynamic tick in the RV64 defconfig
- Remove long-deprecated gate area stubs
- MAINTAINERS updates to switch to the newly-created shared RISC-V git
tree, and to fix a get_maintainers.pl issue for patches involving
SiFive E-mail addresses
Also, one integration fix to resolve a build problem introduced during
in the v5.3-rc1 merge window:
- Fix build break after macro-to-function conversion in
asm-generic/cacheflush.h
* tag 'riscv/for-v5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: fix build break after macro-to-function conversion in generic cacheflush.h
RISC-V: Add an Image header that boot loader can parse.
RISC-V: Setup initial page tables in two stages
riscv: remove free_initrd_mem
riscv: ccache: Remove unused variable
riscv: Introduce huge page support for 32/64bit kernel
x86, arm64: Move ARCH_WANT_HUGE_PMD_SHARE config in arch/Kconfig
RISC-V: Fix memory reservation in setup_bootmem()
riscv: defconfig: enable SOC_SIFIVE
riscv: select SiFive platform drivers with SOC_SIFIVE
arch: riscv: add config option for building SiFive's SoC resource
riscv: Remove gate area stubs
MAINTAINERS: change the arch/riscv git tree to the new shared tree
MAINTAINERS: don't automatically patches involving SiFive to the linux-riscv list
RISC-V: defconfig: Enable NO_HZ_IDLE and HIGH_RES_TIMERS
Pull parisc fixes from Helge Deller:
- Prevent kernel panics by adding proper checking of register values
injected via the ptrace interface
- Wire up the new clone3 syscall
* 'parisc-5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Wire up clone3 syscall
parisc: Avoid kernel panic triggered by invalid kprobe
parisc: Ensure userspace privilege for ptraced processes in regset functions
parisc: Fix kernel panic due invalid values in IAOQ0 or IAOQ1
Pull module updates from Jessica Yu:
"Summary of modules changes for the 5.3 merge window:
- Code fixes and cleanups
- Fix bug where set_memory_x() wasn't being called when rodata=n
- Fix bug where -EEXIST was being returned for going modules
- Allow arches to override module_exit_section()"
* tag 'modules-for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
modules: fix compile error if don't have strict module rwx
ARM: module: recognize unwind exit sections
module: allow arch overrides for .exit section names
modules: fix BUG when load module with rodata=n
kernel/module: Fix mem leak in module_add_modinfo_attrs
kernel: module: Use struct_size() helper
kernel/module.c: Only return -EEXIST for modules that have finished loading
The same getuser/putuser error paths are used regardless of whether AC
is set. In non-exception failure cases, this results in an unnecessary
CLAC.
Fixes the following warnings:
arch/x86/lib/getuser.o: warning: objtool: .altinstr_replacement+0x18: redundant UACCESS disable
arch/x86/lib/putuser.o: warning: objtool: .altinstr_replacement+0x18: redundant UACCESS disable
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/bc14ded2755ae75bd9010c446079e113dbddb74b.1563413318.git.jpoimboe@redhat.com
After adding mcsafe_handle_tail() to the objtool uaccess safe list,
objtool reports:
arch/x86/lib/usercopy_64.o: warning: objtool: mcsafe_handle_tail()+0x0: call to __fentry__() with UACCESS enabled
With SMAP, this function is called with AC=1, so it needs to be careful
about which functions it calls. Disable the ftrace entry hook, which
can potentially pull in a lot of extra code.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/8e13d6f0da1c8a3f7603903da6cbf6d582bbfe10.1563413318.git.jpoimboe@redhat.com
After an objtool improvement, it's complaining about the CLAC in
copy_user_handle_tail():
arch/x86/lib/copy_user_64.o: warning: objtool: .altinstr_replacement+0x12: redundant UACCESS disable
arch/x86/lib/copy_user_64.o: warning: objtool: copy_user_handle_tail()+0x6: (alt)
arch/x86/lib/copy_user_64.o: warning: objtool: copy_user_handle_tail()+0x2: (alt)
arch/x86/lib/copy_user_64.o: warning: objtool: copy_user_handle_tail()+0x0: <=== (func)
copy_user_handle_tail() is incorrectly marked as a callable function, so
objtool is rightfully concerned about the CLAC with no corresponding
STAC.
Remove the ELF function annotation. The copy_user_handle_tail() code
path is already verified by objtool because it's jumped to by other
callable asm code (which does the corresponding STAC).
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/6b6e436774678b4b9873811ff023bd29935bee5b.1563413318.git.jpoimboe@redhat.com
After an objtool improvement, it complains about the fact that
start_cpu0() jumps to code which has an LRET instruction.
arch/x86/kernel/head_64.o: warning: objtool: .head.text+0xe4: unsupported instruction in callable function
Technically, start_cpu0() is callable, but it acts nothing like a
callable function. Prevent objtool from treating it like one by
removing its ELF function annotation.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/6b1b4505fcb90571a55fa1b52d71fb458ca24454.1563413318.git.jpoimboe@redhat.com
After making a change to improve objtool's sibling call detection, it
started showing the following warning:
arch/x86/kvm/vmx/nested.o: warning: objtool: .fixup+0x15: sibling call from callable instruction with modified stack frame
The problem is the ____kvm_handle_fault_on_reboot() macro. It does a
fake call by pushing a fake RIP and doing a jump. That tricks the
unwinder into printing the function which triggered the exception,
rather than the .fixup code.
Instead of the hack to make it look like the original function made the
call, just change the macro so that the original function actually does
make the call. This allows removal of the hack, and also makes objtool
happy.
I triggered a vmx instruction exception and verified that the stack
trace is still sane:
kernel BUG at arch/x86/kvm/x86.c:358!
invalid opcode: 0000 [#1] SMP PTI
CPU: 28 PID: 4096 Comm: qemu-kvm Not tainted 5.2.0+ #16
Hardware name: Lenovo THINKSYSTEM SD530 -[7X2106Z000]-/-[7X2106Z000]-, BIOS -[TEE113Z-1.00]- 07/17/2017
RIP: 0010:kvm_spurious_fault+0x5/0x10
Code: 00 00 00 00 00 8b 44 24 10 89 d2 45 89 c9 48 89 44 24 10 8b 44 24 08 48 89 44 24 08 e9 d4 40 22 00 0f 1f 40 00 0f 1f 44 00 00 <0f> 0b 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 55 49 89 fd 41
RSP: 0018:ffffbf91c683bd00 EFLAGS: 00010246
RAX: 000061f040000000 RBX: ffff9e159c77bba0 RCX: ffff9e15a5c87000
RDX: 0000000665c87000 RSI: ffff9e15a5c87000 RDI: ffff9e159c77bba0
RBP: 0000000000000000 R08: 0000000000000000 R09: ffff9e15a5c87000
R10: 0000000000000000 R11: fffff8f2d99721c0 R12: ffff9e159c77bba0
R13: ffffbf91c671d960 R14: ffff9e159c778000 R15: 0000000000000000
FS: 00007fa341cbe700(0000) GS:ffff9e15b7400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fdd38356804 CR3: 00000006759de003 CR4: 00000000007606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
loaded_vmcs_init+0x4f/0xe0
alloc_loaded_vmcs+0x38/0xd0
vmx_create_vcpu+0xf7/0x600
kvm_vm_ioctl+0x5e9/0x980
? __switch_to_asm+0x40/0x70
? __switch_to_asm+0x34/0x70
? __switch_to_asm+0x40/0x70
? __switch_to_asm+0x34/0x70
? free_one_page+0x13f/0x4e0
do_vfs_ioctl+0xa4/0x630
ksys_ioctl+0x60/0x90
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x55/0x1c0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fa349b1ee5b
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/64a9b64d127e87b6920a97afde8e96ea76f6524e.1563413318.git.jpoimboe@redhat.com
Some of the fastop functions, e.g. em_setcc(), are actually just used as
global labels which point to blocks of functions. The global labels are
incorrectly annotated as functions. Also the functions themselves don't
have size annotations.
Fixes a bunch of warnings like the following:
arch/x86/kvm/emulate.o: warning: objtool: seto() is missing an ELF size annotation
arch/x86/kvm/emulate.o: warning: objtool: em_setcc() is missing an ELF size annotation
arch/x86/kvm/emulate.o: warning: objtool: setno() is missing an ELF size annotation
arch/x86/kvm/emulate.o: warning: objtool: setc() is missing an ELF size annotation
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/c8cc9be60ebbceb3092aa5dd91916039a1f88275.1563413318.git.jpoimboe@redhat.com
The __raw_callee_save_*() functions have an ELF symbol size of zero,
which confuses objtool and other tools.
Fixes a bunch of warnings like the following:
arch/x86/xen/mmu_pv.o: warning: objtool: __raw_callee_save_xen_pte_val() is missing an ELF size annotation
arch/x86/xen/mmu_pv.o: warning: objtool: __raw_callee_save_xen_pgd_val() is missing an ELF size annotation
arch/x86/xen/mmu_pv.o: warning: objtool: __raw_callee_save_xen_make_pte() is missing an ELF size annotation
arch/x86/xen/mmu_pv.o: warning: objtool: __raw_callee_save_xen_make_pgd() is missing an ELF size annotation
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/afa6d49bb07497ca62e4fc3b27a2d0cece545b4e.1563413318.git.jpoimboe@redhat.com
Pull tracing updates from Steven Rostedt:
"The main changes in this release include:
- Add user space specific memory reading for kprobes
- Allow kprobes to be executed earlier in boot
The rest are mostly just various clean ups and small fixes"
* tag 'trace-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (33 commits)
tracing: Make trace_get_fields() global
tracing: Let filter_assign_type() detect FILTER_PTR_STRING
tracing: Pass type into tracing_generic_entry_update()
ftrace/selftest: Test if set_event/ftrace_pid exists before writing
ftrace/selftests: Return the skip code when tracing directory not configured in kernel
tracing/kprobe: Check registered state using kprobe
tracing/probe: Add trace_event_call accesses APIs
tracing/probe: Add probe event name and group name accesses APIs
tracing/probe: Add trace flag access APIs for trace_probe
tracing/probe: Add trace_event_file access APIs for trace_probe
tracing/probe: Add trace_event_call register API for trace_probe
tracing/probe: Add trace_probe init and free functions
tracing/uprobe: Set print format when parsing command
tracing/kprobe: Set print format right after parsed command
kprobes: Fix to init kprobes in subsys_initcall
tracepoint: Use struct_size() in kmalloc()
ring-buffer: Remove HAVE_64BIT_ALIGNED_ACCESS
ftrace: Enable trampoline when rec count returns back to one
tracing/kprobe: Do not run kprobe boot tests if kprobe_event is on cmdline
tracing: Make a separate config for trace event self tests
...
Commit c296d4dc13 ("asm-generic: fix a compilation warning")
converted the various flush_*cache_* macros in
asm-generic/cacheflush.h to static inline functions. This breaks
RISC-V builds, since RISC-V's cacheflush.h includes the generic
cacheflush.h and then undefines the macros to be overridden.
Fix by copying the subset of the no-op functions that are reused from
the generic cacheflush.h into the RISC-V cacheflush.h, and dropping
the include of the generic cacheflush.h.
Fixes: c296d4dc13 ("asm-generic: fix a compilation warning")
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
xive_find_target_in_mask() has the following for(;;) loop which has a
bug when @first == cpumask_first(@mask) and condition 1 fails to hold
for every CPU in @mask. In this case we loop forever in the for-loop.
first = cpu;
for (;;) {
if (cpu_online(cpu) && xive_try_pick_target(cpu)) // condition 1
return cpu;
cpu = cpumask_next(cpu, mask);
if (cpu == first) // condition 2
break;
if (cpu >= nr_cpu_ids) // condition 3
cpu = cpumask_first(mask);
}
This is because, when @first == cpumask_first(@mask), we never hit the
condition 2 (cpu == first) since prior to this check, we would have
executed "cpu = cpumask_next(cpu, mask)" which will set the value of
@cpu to a value greater than @first or to nr_cpus_ids. When this is
coupled with the fact that condition 1 is not met, we will never exit
this loop.
This was discovered by the hard-lockup detector while running LTP test
concurrently with SMT switch tests.
watchdog: CPU 12 detected hard LOCKUP on other CPUs 68
watchdog: CPU 12 TB:85587019220796, last SMP heartbeat TB:85578827223399 (15999ms ago)
watchdog: CPU 68 Hard LOCKUP
watchdog: CPU 68 TB:85587019361273, last heartbeat TB:85576815065016 (19930ms ago)
CPU: 68 PID: 45050 Comm: hxediag Kdump: loaded Not tainted 4.18.0-100.el8.ppc64le #1
NIP: c0000000006f5578 LR: c000000000cba9ec CTR: 0000000000000000
REGS: c000201fff3c7d80 TRAP: 0100 Not tainted (4.18.0-100.el8.ppc64le)
MSR: 9000000002883033 <SF,HV,VEC,VSX,FP,ME,IR,DR,RI,LE> CR: 24028424 XER: 00000000
CFAR: c0000000006f558c IRQMASK: 1
GPR00: c0000000000afc58 c000201c01c43400 c0000000015ce500 c000201cae26ec18
GPR04: 0000000000000800 0000000000000540 0000000000000800 00000000000000f8
GPR08: 0000000000000020 00000000000000a8 0000000080000000 c00800001a1beed8
GPR12: c0000000000b1410 c000201fff7f4c00 0000000000000000 0000000000000000
GPR16: 0000000000000000 0000000000000000 0000000000000540 0000000000000001
GPR20: 0000000000000048 0000000010110000 c00800001a1e3780 c000201cae26ed18
GPR24: 0000000000000000 c000201cae26ed8c 0000000000000001 c000000001116bc0
GPR28: c000000001601ee8 c000000001602494 c000201cae26ec18 000000000000001f
NIP [c0000000006f5578] find_next_bit+0x38/0x90
LR [c000000000cba9ec] cpumask_next+0x2c/0x50
Call Trace:
[c000201c01c43400] [c000201cae26ec18] 0xc000201cae26ec18 (unreliable)
[c000201c01c43420] [c0000000000afc58] xive_find_target_in_mask+0x1b8/0x240
[c000201c01c43470] [c0000000000b0228] xive_pick_irq_target.isra.3+0x168/0x1f0
[c000201c01c435c0] [c0000000000b1470] xive_irq_startup+0x60/0x260
[c000201c01c43640] [c0000000001d8328] __irq_startup+0x58/0xf0
[c000201c01c43670] [c0000000001d844c] irq_startup+0x8c/0x1a0
[c000201c01c436b0] [c0000000001d57b0] __setup_irq+0x9f0/0xa90
[c000201c01c43760] [c0000000001d5aa0] request_threaded_irq+0x140/0x220
[c000201c01c437d0] [c00800001a17b3d4] bnx2x_nic_load+0x188c/0x3040 [bnx2x]
[c000201c01c43950] [c00800001a187c44] bnx2x_self_test+0x1fc/0x1f70 [bnx2x]
[c000201c01c43a90] [c000000000adc748] dev_ethtool+0x11d8/0x2cb0
[c000201c01c43b60] [c000000000b0b61c] dev_ioctl+0x5ac/0xa50
[c000201c01c43bf0] [c000000000a8d4ec] sock_do_ioctl+0xbc/0x1b0
[c000201c01c43c60] [c000000000a8dfb8] sock_ioctl+0x258/0x4f0
[c000201c01c43d20] [c0000000004c9704] do_vfs_ioctl+0xd4/0xa70
[c000201c01c43de0] [c0000000004ca274] sys_ioctl+0xc4/0x160
[c000201c01c43e30] [c00000000000b388] system_call+0x5c/0x70
Instruction dump:
78aad182 54a806be 3920ffff 78a50664 794a1f24 7d294036 7d43502a 7d295039
4182001c 48000034 78a9d182 79291f24 <7d23482a> 2fa90000 409e0020 38a50040
To fix this, move the check for condition 2 after the check for
condition 3, so that we are able to break out of the loop soon after
iterating through all the CPUs in the @mask in the problem case. Use
do..while() to achieve this.
Fixes: 243e25112d ("powerpc/xive: Native exploitation of the XIVE interrupt controller")
Cc: stable@vger.kernel.org # v4.12+
Reported-by: Indira P. Joga <indira.priya@in.ibm.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1563359724-13931-1-git-send-email-ego@linux.vnet.ibm.com
On parisc the privilege level of a process is stored in the lowest two bits of
the instruction pointers (IAOQ0 and IAOQ1). On Linux we use privilege level 0
for the kernel and privilege level 3 for user-space. So userspace should not be
allowed to modify IAOQ0 or IAOQ1 of a ptraced process to change it's privilege
level to e.g. 0 to try to gain kernel privileges.
This patch prevents such modifications in the regset support functions by
always setting the two lowest bits to one (which relates to privilege level 3
for user-space) if IAOQ0 or IAOQ1 are modified via ptrace regset calls.
Link: https://bugs.gentoo.org/481768
Cc: <stable@vger.kernel.org> # v4.7+
Tested-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: Helge Deller <deller@gmx.de>
On parisc the privilege level of a process is stored in the lowest two bits of
the instruction pointers (IAOQ0 and IAOQ1). On Linux we use privilege level 0
for the kernel and privilege level 3 for user-space. So userspace should not be
allowed to modify IAOQ0 or IAOQ1 of a ptraced process to change it's privilege
level to e.g. 0 to try to gain kernel privileges.
This patch prevents such modifications by always setting the two lowest bits to
one (which relates to privilege level 3 for user-space) if IAOQ0 or IAOQ1 are
modified via ptrace calls in the native and compat ptrace paths.
Link: https://bugs.gentoo.org/481768
Reported-by: Jeroen Roovers <jer@gentoo.org>
Cc: <stable@vger.kernel.org>
Tested-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: Helge Deller <deller@gmx.de>
